Escolar Documentos
Profissional Documentos
Cultura Documentos
Contractor:
Project:
Place of Test: The test center of Jiangsu Zhongtian Technology Co., Ltd
Date of Test:
Remark: /
Test Item:
The below-signed persons guarantee that all the test results are real and valid. And the OPGW
Joint Box
1. Visual examination
2. Dimensional
3. Waterproof Test
Acceptance criteria:
Visual inspection: Glossy, no crack and no burr.
2.2 Dimensional
The test is to ensure that fittings are within the dimensional tolerance stated on contract drawings.
Acceptance criteria:
The following tolerance shall be allowed on all dimensions to which special tolerance do not apply.
i) Dimensions up to and including 30mm ±1.5mm.
ii) Dimensions greater than 30mm ±5%
Acceptance criteria:
no water enters into box after test
3. Inspection and test form sheet
3.1 Joint Box
PTKO20T-48D;PTKO11T-48D;PTKO30T-72D
Visual examination
Dimensional
According to drawings
1
()
Waterproof Test(IPx7)
No Requirement Test result Conclusion