Escolar Documentos
Profissional Documentos
Cultura Documentos
GU 628
(OLD SP 1273)
This document is the property of Petroleum Development Oman, LLC. Neither the whole nor any
part of this document may be disclosed to others or reproduced, stored in a retrieval system, or
transmitted in any form by any means (electronic, mechanical, reprographic recording or otherwise)
without prior written consent of the owner.
Guidelines to Civil & Buildings Standard Drawings- Index Version 2.0
Signed: ............................................................
Ali Nasser Al Jahadhamy, UIB/4 (UEB)
CFDH, Civil Engineering
The following is a brief summary of the recent revisions to this document. Details of all revisions prior
to these are held on file by the issuing department.
Version 1.0 May Ali Nasser Al Jahadhamy, Converted to Specification as per PDO
‘04 TTO/2 (UEC) policy and minor changes to the text
Version 2.0 Dec ‘09 Ali Nasser Al Jahadhamy, Converted to Guidelines and standard
UIB/4 (UEB) drawings revised to incorporate new
requirements
Contents
1.0 Introduction ......................................................................................................................... 1
1.1 Purpose............................................................................................................................. 1
1.2 User Guidelines ................................................................................................................ 1
1.3 Changes to the Specification ............................................................................................ 1
1.4 Applicable Standards, Specifications and Codes ............................................................. 1
1.4.1 PDO Standards ................................................................................................ 2
1.4.2 SIEP / Shell GSI Standards ............................................................................. 2
1.5 Compliance with Standards ............................................................................................. 2
Appendices ............................................................................................................................... 38
Appendix A: Definitions Glossary of Definitions & Abbreviations ................................... 39
A.1 General Definitions & Terminology ................................................................... 39
A.2 Abbreviations...................................................................................................... 40
Appendix B: SP User - Comment Form .............................................................................. 42
1.0 Introduction
1.1 Purpose
The purpose of this document is to list out the “Standard Drawings” that shall be used in
the design and construction of Civil & Building Works and is intended for use by PDO and
its nominated Consultants and Contractors for the development and operation of Company
facilities.
- Set the Company standards for facilities along the facilities life cycle
This Specification supersedes the “SP 1273 Civil & Buildings Standard Drawings-
Index”. Other than the conversion or formatting, the following are the main changes to this
document.
This document contains only the list of Standard Drawings for Engineering Section Code 2
(Civil Engineering). The user shall refer the relevant SP’s as listed in GU 611 ‘PDO
Engineering Standards & Procedures’ for other discipline standards and its details.
The standard drawings listed in this document are available in the form of Electronic Files
or Transparencies. The user can get the drawings from the PDO Drawing office Services
Department.
The revision status of the drawings shown, are the latest at the time of preparation of this
document. It is the responsibility of the user to verify and obtain the latest revision of the
standard drawings.
Custodian of this document is the Corporate Functional Discipline Head (CFDH) of Civil
Engineering. Any User of this document, who encounters an inaccuracy or ambiguity, is
requested to notify the CFDH using the SP user-comment form provided in Appendix-B.
Reviews and modifications or changes to the specification will normally be made by the
CFDH every four years or earlier when justified.
This Specification shall be read in conjunction with the latest revisions of the following
Standards, Specifications and Codes.
Any deviations from this part of Specifications shall be subject to Company approval and
shall be advised in writing to the Custodian.
In all cases the Company determine the adequacy of the design carried out and works
executed by the Contractor in accordance with this guideline.
2.0 Scope
2.1 General
Standard drawings are prepared to eliminate the repetitive drawings of design and
construction details and to specify the standard requirements. Standard drawings may show
either specific requirements or contain information guidelines for drawing insertion of
particular details.
This specification also includes the list of standard drawing for Pipe Supports & Sunshades,
for design requirements and details refer the following documents:
The Standard Drawing Numbers indicates the following information and are briefed from
the following example
STD-2-0202-001-00-A3-O
Where,
A3 : Drawing Size
O : Revision Status
The main index of Section 2 (Civil Engineering) standard drawings are divided in to several
main groups and are segregated in two volumes. The main groups and its detailed list of
drawings are given in the following sections.
From To
From To
The following drawings are available in PDO EDMS or Live Link. This can be obtained
either from the PDO Drawing office Services Department or directly download from the
Live Link.
2.4.1 Standard Markers for Under Ground Services (STD-2-0001 to STD-2 0299)
31 STD-2-1627-001 ALLOTTED
32 STD-2-1628-001 ALLOTTED
57 STD-2-3312-001 ALLOTTED
58 STD-2-3313-001 ALLOTTED
The following drawings are available in PDO EDMS or Live Link. This can be obtained
either from the PDO Drawing office Services Department or directly download from the
Live Link.
10 STD-2-4109-001-00-A3- R.O.W.
Refer SP-1283 Specification for Standard Sunshades – Design Requirements & Standard
Drawings.
Refer SP-1283 Specification for Standard Sunshades – Design Requirements & Standard
Drawings)
Refer SP-1283 Specification for Standard Sunshades – Design Requirements & Standard
Drawings.
Refer SP-1283 Specification for Standard Sunshades – Design Requirements & Standard
Drawings.
Refer SP-1283 Specification for Standard Sunshades – Design Requirements & Standard
Drawings.
Refer SP-1283 Specification for Standard Sunshades – Design Requirements & Standard
Drawings.
Refer SP-1283 Specification for Standard Sunshades – Design Requirements & Standard
Drawings.
Refer SP-1283 Specification for Standard Sunshades – Design Requirements & Standard
Drawings.
Refer SP-1283 Specification for Standard Sunshades – Design Requirements & Standard
Drawings.
Refer SP-1283 Specification for Standard Sunshades – Design Requirements & Standard
Drawings.
Refer SP-1283 Specification for Standard Sunshades – Design Requirements & Standard
Drawings)
Appendices
Appendix A: Glossary of Definitions & Abbreviations
For the purposes of this document the following definitions shall be used:
the Contractor : The party with which the Company has entered into a
Contract
Worksite : The land and other places on, under, in or through which the
Works are to be executed.
A.2 Abbreviations
EL : Elevation
GA : General Arrangement
GALV : Galvanized
GL : Ground Level
IL : Invert Level
MAX : Maximum
MIN : Minimum
MK : Mark
MS : Mild Steel
QTY : Quantity
RC : Reinforced Concrete
REF : Reference
REQ'D : Required
SCHED : Schedule
SQ : Square
STD : Standard
THK : Thick
TYP : Typical
WT : Weight
GU User-Comment Form
If you find something that is incorrect, ambiguous or could be better in GU, write your comments
and suggestions on this form. Send the form to the Document Control Section (DCS). They make
a record of your comment and send the form to the correct CFDH. The form has spaces for your
personal details. This lets DCS or the CFDH ask you about your comments and tell you about the
decision.
Number:
Comments:
Suggestions:
Phone:
CFDH Actions
Comments: