Você está na página 1de 2

Population 12000 BOD per capita 75

per capita flow 350 lps BOD LOAD 900


per capita flow 0.25 m3/capita BOD,mg/l 300

1 Flow 2 Wastewater Quality Inlet Outlet Units


Average 3000 m3/d BOD 300 10 mg/l
125 m3/hr TKN 40 1 mg/l
2.1 m3/min Ammonia 24 1 mg/l
0.035 m3/s TSS 300 10 mg/l
Peak factor 2.50 Assumptions
Peak duration 2 Elevation 50.000
Peak flow 7500 m3/d Yield coefficient, Y 0.650
312.5 m3/hr Kd 0.050
5.2 m3/min Clean water efficiency 5.500
0.087 m3/s Alpha 0.5
2 Balancing Tank Beta 0.950
Effective volume 375 m3 Sewage Temperature 35
HRT at Qavg,hrs 3.0 hrs O2 solu.Tap water, field condnC'sw 6.9
Air required for effective mings 375 m3/hr O2 solu.Tap water, 20deg C ,Csw 9.1
SBR feed Pumps 125 DO 2.000
Sleetced feed Pumps 125 m3/hr Fine Bubble effeciency 0.236
Fill hours 3 hours Design Air temperature 45

3 SBR- operating details 4 SBR Sizing


Operating cycle time 6 hrs Volume per cycle per basin 375.0 m3
No of SBR 2 no BOD load, per SBR 450.0 kg/d
No of cyles per basin 4 MLSS to be maitained 3500 mg/l
Total fill time 3 hrs F/M to be maintained 0.1 d-1
Anoxic ( non aerated) fill time 0.5 hrs Sludge Volume Index 0.15 m3/kg
Aerated fill time 2.5 Size
Aeration time 0.5 Approach -I, F/M based
Settlement Time 1 Sludge required 4500 kgs
Decant time 1 Sludge after decant,concn 6 kg/m3
Idle time 0.5 Sludge Volume 733.3 m3
Total cycle time 6 Approach -2, SVI based
No of cycles per basin 4 settled sludge volume 675 m3
Selected volume of SBR 733.3 m3
5 SBR dimesnions add volume of decant 375.0 m3
Side water Depth 5 Volume per basin 1108.3 m3
Area 266 add band betn Sludge layer/decant 221.67 m3
Length 19 Total Volume 1330.0 m3
Width 14 6 Water Levels in SBR and MLSS
Selected dimesnions area 266 Depth of decant volume 1.410 m
Total volume 1330 LWL 3.6 m
Volume at LWL 955.0 m3
MLSS Concentration 4712.0 mg/l
MLSS Concentration(without band) 6136.4 mg/l
7 Decanter Sizing 8 Chlorine Contact Tank
Decant Volume/cycle 375.0 Flow rate to filters 125 m3/hr
No fo SBR in decant mode at a time 1 Max decant rate 468.75 m3/hr
Decant Time in Hours 1 Duration of Decant 0.8 hours
Rate of flow 375 m3/hr Volume of CCT 275 m3
6.25 m3/min CCT contact period 35.2 min
Selected decnater (25 % extra for 7.8125 m3/min for 45 minutes HRT volume 351.56 m3
operational flexibility)

9 Sludge Production 10 WasteSludge Pump


Sludge Production rate 0.7 kg/kgBODr Sludge conc after decant 4.7 kg/m3
Sludge Produced 609.0 kg/d Sludge Volume 125.5 m3
SRT,d 14.1 days Per reactor per cycle 15.7 m3
Sludge Wasting Pump cap 31 m3/hr

11 Sludge Thickener 12 Sludge Digestor


Solids Loading rate(25-60) 35 kg/m2/d VS destruction 30 %
Surface loading rate ( 16-30) 24 m3/m2/d Degree days(from M&E) 300
Solids flow rate 150.46 kg/hr HRT 7 Days
Area of thickener 103.17 m2 Volume of sludge to be digested 129.243 m3/d
Diameter 11.46 m Volume as 7/5 concept 129.243 m3/d
Selected dia 10 m Volume of digestor 904.7
Area of thickener 78.5 Sludge in reactor at 2 % conc 18637 kg
Conc of thickened sludge 20 kg/m3 Temperature at winter 22 degC
Volume of thickned sludge 29.563 m3/d Sludge age required 13.636
Depth of Thickenening Sludge to be withdrawn everyday 1366.7 kg/d
at top 4.71 kg/m3 Volume of sludge withdrawn 66.345 m3/d
at bottom 20 kg/m3 Consider sludge withdrawal 20 m3/d
average 12.35602 kg/m3 Size of digestor
Volume of sludge 47.852 m3 Depth 6
Depth 0.610 m Length 12.279
Depth of settling zone 1.5 m Width 12.279
Clear effluent depth 1 m
Free Board 0.5
SWD Depth 3.11 m 1.53

13 Air requirements
a Balancing Tank, at 1 m3/m3/hr 375 SBR
Sludge Yield 0.3814 kg/BOD
b Sludge Digestor Sludge Produced 471.19 kg/d
Expected VS Destruction 30% Kg of BOD removed 1278.9 kg/d
VS destroyed 146.16 Nitrogen to be nitrified 534.69 kg/d
O2 required 2 Kg/kgVSr AOR 1342.4 kg/d
O2 required 292.32 SOR 3734.7 kg/d
AOR/SOR for fine bubble 0.4 Air Required 2382.7 m3/hr
SOR 730.8 kg/d Air required at Inlet 2586 nm3/hr
diffuser effeciency 29% Duty blowers 1
Air required 391.9749 m3/hr Each Blower 2586 m3/hr
Air supplied per m3 of digestor vol 0.433263 m3/m3/hr Fill time (Anoxic+Aerated) 3
Anoxic fill 0.5
Aerated fill time 2.5
Settel time 1
Decant time 1
Idle 0.5
available aeration time 0.5
Total aeration Time 3

Você também pode gostar