Escolar Documentos
Profissional Documentos
Cultura Documentos
Copyright
CineVision
All other product names and trademarks are the intellectual property of their respective owners. This
documentation contains confidential and proprietary information of Bally Gaming, Inc. No portion of
this document may be reproduced or transmitted in any form or by any means, electronic or mechanical,
for any purpose, without the express written permission of Bally Gaming, Inc.
The specifications and information contained in this documentation are subject to change without notice.
All statements, information, illustrations, specifications and recommendations in this documentation are
believed to be accurate but are provided without warranty of any kind, expressed or implied.
Page iii of 34
CineVision Game Assembly
Contents
Introduction....................................................................................................................6
About this Guide ..................................................................................................................... 6
Parts and Assemblies .............................................................................................................6
Recommended Tools & Supplies ............................................................................................ 6
Cabinet Parts Kit............................................................................................................8
Parts and Assemblies .............................................................................................................8
Speakers .............................................................................................................................. 10
Cable Interconnect Brackets .................................................................................................11
Door Switches ...................................................................................................................... 12
Base Shelf ............................................................................................................................ 13
Main Cabinet Door Lock .......................................................................................................13
Catch Bottle and Tubing .......................................................................................................14
Footrest ................................................................................................................................ 14
Processor/Power Supply Assembly ...................................................................................... 15
4-Meter PCB......................................................................................................................... 20
Audio Board Tray & Chassis .................................................................................................20
Deck Bulkhead ..................................................................................................................... 21
26" LCD Touch Screen ......................................................................................................... 23
Gas Struts............................................................................................................................. 25
Cabinet Base Assembly ..............................................................................................26
Parts and Assemblies ........................................................................................................... 26
Lower Door ........................................................................................................................... 26
Lock and Cam ...................................................................................................................... 27
Front Base Panel .................................................................................................................. 28
Top Box Assembly ......................................................................................................28
Top Box Cabinet ................................................................................................................... 30
Door Switch ........................................................................................................................................ 31
Top Box Door ....................................................................................................................... 32
Lock and Cam..................................................................................................................................... 33
Introduction
Table 1: Installation
Section Description
One Main Cabinet Assembly
Two Cabinet Base Assembly
Three Top Box Cabinet Assembly and Installation
For this portion of the assembly, you will install the following components (numbered accordingly in
Speakers
STEP 1: Use four nuts (NLS-M0470-1117) to install both 4" Speakers (104212) on top of the
upper portion of the cabinet.
a. Be sure the terminals on each speaker point to the center of the cabinet as shown
in Figure 2.
STEP 2: St the Speaker Grill (103205) onto the four studs surrounding the speaker opening on
the inside of the cabinet.
STEP 3: Place the 6" Speaker (100673-00001) onto the grill (see Figure 1).
STEP 4: Secure the speaker and grill to the cabinet using four nuts (NLS-M0470-1117).
Door Switches
STEP 1: Locate each of the three door
switch brackets numbered in
Figure 6.
STEP 2: Insert a Door Switch (E-00108-
0384) into each of the brackets.
Base Shelf
STEP 1: Set the Shelf Base (104805) inside
the base of the cabinet
a. Be sure to set the shelf as
far back into the cabinet
as possible.
STEP 2: Tighten the thumb-bolts to
secure the shelf to the base of the
cabinet.
Base Shelf
Page 13 of 34
CineVision Game Assembly
Footrest
STEP 1: Secure the Footrest (103419) to the
cabinet using three ??? (?????) as
shown in Figure 11.
Backplane
Figure 14: 103470 Mount Location
Figure 13: MPU/Power Supply (103470)
STEP 2: Slide the 5v/12v Power Supply (103094) onto the left side of the MPU/power supply
assembly.
STEP 3: Slide the 24v Power Supply (103107) onto the right side of MPU/power supply assembly.
STEP 4: Tighten the thumb-bolts on each power supply to secure in place.
STEP 5: Slide the MPU (44603) into the MPU/power supply assembly below the power supplies.
MPU
MPU Cables
STEP 6: Notice the MPU cables attached to the left side of the housing Figure 17.
3
STEP 7: Refer to the following chart and
Figure 18 and connect the
MPU cables accordingly: 1
4 2
STEP 8: Route the XX portion of the Main Cabinet Harness (104225) along the back, right corner
of the cabinet.
STEP 9: Route the XX portion of the main cabinet harness along the back, left corner of the
cabinet.
4-Meter PCB
STEP 1: Use four screws (LSPP-M0350-1206) to mount the 4-Meter PCB (SDG-26460-4) to the
Figure 21: Audio Board Tray and Chassis Figure 22: Chassis Mount Location
Deck Bulkhead
STEP 1: Mount the Deck Bulkhead (103672) on the two studs to the right of the 4-meter PCB,
below the touch screen area.
STEP 2: Secure the bulkhead to the cabinet with two nuts (NLS-M0470-1117).
Figure 25: Bulkhead Mount Location Figure 26: Mounted Deck Bulkhead
STEP 3: Locate the Cabinet Harness (104225) connected to the MPU/power supply assembly.
STEP 4: Insert the following connectors into deck bulkhead precisely as listed in the following
chart:
STEP 4: Slide a Side Grill (103630) onto each of the two Side Grill Backings (103575).
STEP 5: Locate the monitor rail posts each corner of the touch screen (see Figure 28 and Figure
30).
STEP 6: Place an assembled side grill on each of the bottom rail posts.
IMPORTANT
Notice the rubber strip along the inside edge of each grill. Be sure to position the grill
with the rubber edge against the touch screen.
STEP 7: Press the top portion of each grill against the monitor until it locks onto the top rail post.
Gas Struts
For this portion of the assembly, you will install the following components to assemble the cabinet base.
Lower Door
STEP 1: Use three nuts (NLS-M0470-1117) to mount the Lower Door (103982) onto the cabinet
as in Figure 31.
This portion of the assembly involves the assembly and installation of the top box, which includes the
following:
Lamp Assembly
Door Switch
STEP 1: Locate the door switch bracket on the right side of the top box cabinet.
STEP 2: Insert the provided Door Switch (E-00108-0385) into the bracket.
STEP 2: Insert the lock into the designated hole on the top of the top box cabinet.
STEP 3: From the inside of the cabinet, place the Cam (104888) onto the lock.
STEP 4: Secure the cam in place using the hardware removed in Step 1.
a. Be sure to install the hardware in the exact order illustrated in Figure 38.