Escolar Documentos
Profissional Documentos
Cultura Documentos
Icopal Group
Icopal is the world leader in building protection Key figures of the Icopal Group:
from the roof right down to the basement. Turnover 2013: € 1,200 million
Icopal is a worldwide partner with a network of
Employees: 3,400 people
local sales offices and production locations.
Manufacturing sites: 36
Business presence on 6 continents
The Group has built its reputation on more than 160 years of expe- Icopal is constantly striving to protect the environment and has set
rience in roofing and waterproofing and focuses on maintaining its recycling and minimizing the use of raw materials and energy as top
position as the world reference in the roofing and waterproofing priorities in the development and production of roofing and water-
industry with such strong trademarks as Siplast for bituminous proofing solutions.
roofing products and geomembranes.
The Group aims to provide the highest quality products in the buil-
Icopal has significant technological know-how and long experience ding sector and as a result has been awarded several notable cer-
in international markets. It provides high quality service which best tifications that are recognised by specifiers, government authori-
meet customers’ needs and challenges in their local context. ties, and building control bodies.
Siplast was established in France in 1955 and counts numerous Siplast became a member of the Icopal Group in 1989 and currently
achievements and innovations in the field of bitumen membranes has sales offices in Italy, Spain, Algeria and Japan. An Export division
for roofing and waterproofing for buildings and civil engineering. of Siplast deals directly with customers from all other countries
worldwide.
Siplast pioneered the manufacture of SBS modified bitumen roofing.
Contents
3
Flat roof - Products
Bituminous SBS membranes for single-layer waterproofing systems
SBS elastomeric bitumen reinforced membrane used as a single layer in a self-adhesive waterproofing system for exposed roofs.
SBS elastomeric bitumen membrane for mechanical fixing in single layer systems. Mostly used for non-accessible roof on steeldeck on insulation
board.
A reinforced, polymer-modified SBS bitumen sheet with mineral granule or slate-finished upper surface and a macro perforated thermofusible film
under surface. Available in Red Bauxite 52, Grey 30 and Green Lichen 64.
A reinforced, SBS elastomeric bituminous membrane with double joint, for single layer waterproofing of inaccessible roofs with gravel ballast or on
terraces accessible to pedestrians with paving slabs.
4
Product characteristics Accessible roof Non accessible roof
5
Flat roof - Products
Bituminous SBS membranes for multi-layer waterproofing systems
An SBS-modified, reinforced bitumen membrane, for use as a first layer in a two-layer, partially bonded built-up roof waterproofing system.
An SBS elastomeric bitumen membrane with self-adhesive side laps for use as underlayer of a loose-laid two-ply system under heavy protection.
A reinforced, polymer-modified bitumen sheet, for use in two-layer, built-up waterproofing systems as a base or loose-laid cap sheet with additional
ballast protection.
A reinforced, polymer-modified SBS bitumen sheet for use as a base or loose laid cap sheet with additional ballast protection.
A polymer-modified bitumen sheet finished for use as a base sheet or cap sheet with additional protection.
A polymer-modified SBS bitumen sheet for use as a base sheet or cap sheet with additional protection.
SBS elastomeric bitumen reinforced membrane with self protected coloured granules for waterproofing of inaccessible roofs, for use as top layer of
two-layer system self protected or under heavy protection.
A reinforced, polymer-modified bitumen sheet with coloured mineral granule-finishing, for use as a cap sheet. Available in Grey 30 and Green Lichen
64.
A reinforced, polymer-modified bitumen sheet with coloured mineral granule or slate-finishing and a macro perforated thermofusible film under sur-
face, for use as a cap sheet. Available in Red Bauxite 52, Grey 30 and Green Lichen 64.
Glass fibre
50 g/m2
Top face: sand
Under face: sand
2.6 mm 7.5 x 1 m
system page 13 consult the system
composition
Glass fibre
55 g/m2
Top face: sand
Under face: sand
2.6 mm 7.5 x 1 m
system page 13 consult the system
composition
Non woven
polyester
180 g/m2
Top face: film
Under face: film
2.6 mm 7.5 x 1 m
system page 13 consult the system
composition
Non woven
polyester
180 g/m2
Top face: film
Under face: sand
2.6 mm 7.5 x 1 m
system page 13 consult the system
composition
Non woven
polyester
180 g/m 2
Top face: film
Under face: sand or film
3.7mm 5x1m
system page 13 consult the system
composition
*: Consult the most recent technical data sheets for exact values.
7
Flat roof - Single-layer systems
2
3
2 Upstands: Siplast Primer SBS bitumen primer. 5 Upstands: torched Paradial S top layer.
8
Concrete deck non accessible roofs
6
2
1
4
1 Siplast Primer SBS bitumen primer. 4 Perfader perforated underlay for partial bonding loose-laid.
2 Upstands: Siplast Primer SBS bitumen primer. 5 Torched single-layer Parafor SOLO GS.
3 Upstands: torched Parequerre reinforcement angle. 6 Upstands: torched Paradial S top layer.
9
Flat roof - Single-layer systems
5 9
4
1
8
7
1 Siplast Primer SBS bitumen primer. 6 Loose-laid Verecran 100 separating layer.
3 8
Loose-laid Teranap JS single layer with self adhesive overlap . Loose-laid Verecran 100 separating layer.
4 9
Torched Parequerre reinforcement angle. Gravel ballast.
10
Concrete deck accessible roofs for pedestrian
Loose-laid SBS elastomeric bitumen single layer waterproofing system Slope 1,5 - 5 %
5
11
10
4 9
1 8
2 Loose-laid Verecran 100 separating layer. 8 Loose-laid Verecran 100 separating layer.
3 Loose-laid Teranap JS single layer with self adhesive overlap. 9 Draina G10 drainage embossed underlayer loose laid.
3
1
1 Siplast Primer SBS bitumen primer. 4 Upstands: torched Parequerre reinforcement angle.
2 Upstands: Siplast Primer SBS bitumen primer. 5 Torched on top layer Paradiene 30.1 GS.
12
Concrete deck accessible roofs
6
4
1
9
8
7
5
3
1 Upstands: Siplast Primer SBS bitumen primer. 6 Upstands: torched Paradial S top layer.
2 Loose laid Verecran 100 separating underlayer. 7 Draina G10 drainage embossed underlay (loose laid).
4 Upstands: torched Parequerre reinforcement angle. 9 Uptand with wire mesh cement mortar.
13
Flat roof - Products
Other product used in the SBS bitumen systems
Perfader
Glass fibre Top face: sand
Perforated oxidized bitumen base sheet designed for partial bond- 1.0 Kg/m2 20 x 1 m
ing waterproofing underlay for granule finished systems for inac- 60 g/m2 Under face: film
cessible roofs.
Verecran
Glass fiber separation layer used to allow a loose laid bituminous Glass fleece Glass fleece 0.1 Kg/m2 50 x 1 m
membrane application over concrete on roofs under heavy protec-
tion.
14
Bituminous APP membranes for multi-layer waterproofing systems
15
Flat roof - Products
Synthetic PVC membranes for single-layer waterproofing systems
Product characteristics
P roduct description
Thickness Roll Roll lengths
widths
Monarplan FM 1.2 mm
15 m (for
1.06 m 1.2 mm, 1,8
A polyester reinforced membrane designed specifically for use within mechanically fixed applications. 1.5 mm mm, 2.0 mm
The non-wick polyester fabric gives the membrane inherent tensile strength which is required to 1.65 m thickness)
facilitate the use of steel fasteners to restrain the system against wind uplift. Mechanically fixed 1,8 mm
systems can be cost effective solutions, and are ideal where lightweight constructions are consid- 2.12 m 20 m (for 2.00
2.0 mm
ered. Colours: white, grey. mm thickness)
Monarplan GF
A glass reinforced PVC membrane incorporating a polyester fleece backing. The factory laminated 1.5 mm
polyester backing allows the membrane to be fully adhered to the underlying substrate using a com- 2.12 m 15 m
+ fleece
patible cold applied adhesive and can be the ideal solution on curved, steep or undulating roof designs
that prove challenging for other systems. Colour: grey.
Accessories
Monarplan Prefabricated Corners
Prefabricated corners aid speed of installation on site, and are used to reinforce internal and external corners with
no stretching or cutting required. Colours: Grey, White.
Adhered system
Fully adhered systems are more commonly used Monarplan® GF Fleeceback membrane
above concrete substrates where the process of
installing mechanical fixings is invasive and labour Icopal Fleeceback Adhesive
intensive. Fully adhered systems are reliant upon
suitable weather conditions (which should be con- Insulation board
sidered). However, complex geometries and pitched
Icopal Insulation Adhesive (TK 395)
surfaces can be accommodated with great success.
Fully adhered membranes can also provide a superior Icopal Vapour Control Layer
surface finish.
Structural Deck
17
Flat roof - Products
Synthetic FPO membranes for single-layer waterproofing systems
Product characteristics
P roduct description
Thickness Roll Roll lengths
widths
20 m for 1.2
Monarfin FM 1.2 mm
1.06 m
mm thickness
Polyester reinforced polyolefin membrane designed specifically for use within mechanically fastened 1.50 m
1.5 mm 15 m for 1.50
applications. 2.12 m mm thickness
Monarfin GF
Glass reinforced polyolefin membrane incorporating a polyester fleece backing specifically designed 1.5 mm 2.12 m 15 m
for use in a part mechanically fixed/part adhered system or alternativly fully adhered to the under-
lying substrate using a compatible cold applied adhesive.
Monarfin G
Glass reinforced polyolefin membrane specifically designed for use within ballasted inverted, bal- 1.5 mm 2.12 m 15 m
lasted warm roof or green roof constructions where the membrane is buried.
Monarfin D
1.5 mm 1.40 m 15 m
Un-reinforced FPO membrane for details to be formed on-site.
Accessories
Monarfin Prefabricated Corners
Prefabricated corners aid speed of installation on site, and are used to reinforce internal and external corners with
no stretching or cutting required.
Monarfin W Red
weather resistant FPO membrane which incorporates an aggressive, non-slip, interlocking herringbone tread pat-
tern. Roll dimensions: 15 x 0.74 m.
Adhered system
Fully adhered systems are more commonly used Monarfin® GF Fleeceback membrane
above concrete substrates where the process of
installing mechanical fixings is invasive and labour Icopal Fleeceback Adhesive
intensive. Fully adhered systems are reliant upon
suitable weather conditions (which should be con- Insulation board
sidered). However, complex geometries and pitched
surfaces can be accommodated with great success. Icopal Insulation Adhesive (TK 395)
Fully adhered membranes can also provide a superior Icopal Vapour Control Layer
surface finish.
In adhered systems the Monarfin® membrane is Structural Deck
attached to the substrate using an adhesive. The
adjacent sheets of membrane are then welded.
19
Liquid waterproofing
Sealoflex Waterbased waterproofing system
Sealoflex® Waterbased waterproofing system applies easily to awkward areas e.g. penetrations, vents, skylights. It is used:
• As a low and steep slope roof waterproofer
• For flashings of all types
• As parapet wall and coping waterproofer
• For sealing of joints, laps and fasteners on corrugated metal roofs
• For standing seam metal and all other type metal roofs
• Over existing roof systems
• As a waterproof coating for exterior walls
• As a waterproofer on decks
Finish coat
Sealobond WB Pink
Sealoflex 10 Fabric
Sealobond WB Pink
Sealobond primer WB
Polyester, non-woven, stitch-bonded and heat set fabric that is used Roll dimension:
Sealoflex 10 Fabric for roof panel joints, flashings and other details, flat, smooth roofs. It
conforms readily to uneven surfaces. 1 m x 30 m
20
Coating and other liquid products
Liquid aluminium varnish with synthetic copolymers and a SBS bitumen blend,
Silver Primer for bituminous roofing renovation and metal finishings.
Can 17.5 L
Renov’Paint Fibers is a waterproofing treatment for roofs, terraces, detailing Can 4.6 L
Renov’Paint Fibers and penetrations. The product is an elastomer copolymer based paint with
fibres, for easy application with high elasticity. Can 21 L
21
Slope roof
Shingles
Monartop Garden
Bitumen shingle with a glass-fiber reinforcement, 4 rectangular tabs, coloured mineral protection, underface protected by sand.
Packaging: pallet of 60 m 2 .
Orange Green
Design 3D membranes
Membrane IRT 3D 4.2 mm Classic Red
Elastomeric bitumen waterproofing membrane with slate coloured granule protection and roof tiles appearance. The 3D effect gives the product a relief
and depth perspective, perfectly imitating the appearance of traditional tiles. The Membrane IRT 3D is light-weight and particularly suitable for refur-
bishing roofs previously made from bituminous membranes or shingles and also for new builds. Single-layer application for slopes up to 85°.
22
Breather membrane
Monarperm 500
A highly vapour-open film bonded between two layers of non woven polypropylene forms the breather underlay for ventilated and non ventilated
pitched roofs and walls. Avoid risks of condensation or moisture damages and ensure wind protection.
• Upper side: grey anthracite
• Lower side: light grey.
• Weight: 100 g/m2
• Sd = 0.04 m
Dimensions rolls Length Width
Accessories
Adealu Bands
Modified adhesive bitumen tape surfaced with a composite natural aluminium-polyester foil. The product is used for finishing of waterproofing
details as minor repairs of flat roofs, pitched roofs or walls.
Adealu Bands 10 m 10 cm 15 cm 20 cm 30 cm
Paraflash
Flexible waterproof flashing in SBS modified bitumen on a malleable aluminium mesh finished with a fine grey granular finish on the outer face and a
polyethylene film on the inner face. It’s suitable for all types of flashing including stepped abutments, chimneys, rooflights and flat or pitched roofing
terminations. Malleable, easy to cut and install.
Paraflash 10 m 15 cm 20cm 30 cm 95 cm
23
Foundations over water table
Foundation solutions and primer
Water based rubber modified bitumen coating, ideal for rough or porous Drum 5 Kg
Fondacoat surfaces. No solvent, safe for use in confined areas, no fire risk or dange- Drum 20 Kg
rous vapours.
slate flakes, under face with fusible film. Contains anti-root additive.
HDPE studded membrane for protection and vertical drainage of structu- Roll dimensions: 30 m x 1 m, 30 m x 1.5 m,
Prim’Nap ral below-grade walls. 30 m x 2 m, 30 m x 2.5 m
Siplast Primer hydrocarbon solvent with a short drying time to be used as a primer for all Drum 10 L
types of substrates and decks, (concrete, wood) in buildings and civil engi- Drum 25 L
neering (bridgedeck waterproofing).
24
Building references
Bitumen, liquid and synthetic references
25
Civil Engineering
Bridges
Product characteristics
P roduct description
Reinforcement Surface Nominal Roll
finishing thickness dimensions
Parafor Ponts
SBS elastomeric bitumen compound membrane with a high performance non
woven polyester reinforcement and surfaced with white ceramic granules. To be
used in single-layer system fully-torched onto the bridge deck including the Siplast Top face:
Primer and the Parafor Ponts membrane. The membrane directly receives the non woven ceramic
wearing course (bituminous mix). 8x1m
polyester granules 4,8 mm
150 x 1 m
New! Available now with Echo-Detect Radar technology for civil engineering: this 180 g/m2 Under face:
system is composed of a 2 cm wide and 12 μm thick polyester aluminized stripe film
integrated inside the membrane that allows the location and identification of bitu-
minous waterproofing membranes under the wearing course. The Echo-Detect
technology enables bridge detailed analysis for preliminary diagnosis before the
maintenance work for wearing courses and waterproofing membranes.
Main uses
• Waterproofing of road-bridge decks.
• Waterproofing of slabs used to cap “cut & cover” trenches.
• Waterproofing of concrete decks for car parks.
Product characteristics
P roduct description
Main uses
• Hydraulic works. • Transportation infrastructures
• Canal lining, retention pounds, waster water management. • Tunnels, cut and cover trenches
• Mining wastes containment and landfills. • Construction
• Tailings, heap leach pads. • Tanking
• Industrial reservoirs and storage tanks.
INTERNATIONAL REFERENCES OF TERANAP TP
Algeria Finland Morocco
Oued Souf Valley /Sewage lagoon - 300,000m² Kittila Gold mine - 1,000,000 m2 El Halassa phosphate mine wash plant - 100,000
Natural sewage treatment station in Ghardaia - France m²
600,000 m² Salsigne Gold Mine rehabilitation - 110,000 m² USA
Argentina Mont Saint-Michel wastewater plant - 50,000 m2 Canal of Sacramento Valley- 97,000 m2
Cerro Negro Goldcorp Oroplata Gold mine - JUANON WATER TANK - 110,000 m2 Rockefeller Plaza New York/ Underground works
513,000 m2 OCQUERRE basin - 30,000 m2 - 20,000 m2
Australia Sugar refinery, Bazancourt - 120,000 m2 Canal Casper Alcova, Wyoming - 69,000 m2
Morwell Main Drain Rehabilitation - 23,000 m2 Basins on A7 Highway road - 30,000 m2
Canada Basins on A89 Highway road -120,000 m2
Sewage Treatment Lagoons at Dunnville, Ontario Basins on A61 Highway road - 35,000 m2
- 25,000 m2 Lime-kiln of Dugny -100,000 m2
Tailings Pond at Meadobank, Nunavut - 60,000 Cut and Cover A89 highway tunnel - 13,000 m2
m2 Cut and Cover of Gumont - 10,000 m2
Silverberry landfill, British Columbia 100,000 m2 Channel of Nieffer -250,000 m2
Landfill of Isseane - 4,000 m2
27
Icopal SAS
Export Department
12, rue de la Renaissance
92184 Antony Cedex
France
Tel: +33.(0)1.40.96.36.95 / +33.(0)1.40.96.35.26
siplast-international@icopal.com
www.siplast-international.com