Escolar Documentos
Profissional Documentos
Cultura Documentos
3' 11''
3' 11''
B A
3' 11''
3' 11''
4' 2'' 8' 8''
Ultimate horizontal load in y direction; HyuA = HGyA fG + HQyA fQ + HWyA fW = 0.000 kips
Material details
Compressive strength of concrete; f’c = 3000 psi
Yield strength of reinforcement; fy = 50000 psi
Cover to reinforcement; cnom = 3.000 in
Moment design in x direction
Reinforcement provided; 13 No. 6 bars bottom and 12 No. 6 bars top
Depth of tension reinforcement; dx = h - cnom - xB / 2 = 14.625 in
Area of tension reinforcement provided; As_xB_prov = NxB xB2 / 4 = 5.743 in2
Area of compression reinforcement provided; As_xT_prov = NxT xT2 / 4 = 5.301 in2
Minimum area of reinforcement; As_x_min = 0.0020 h B = 3.888 in2
Spacing of reinforcement; sxB_prov = (B - 2 cnom) / max(NxB - 1, 1) = 8.500 in
Maximum spacing of reinforcement; smax = min(3 h, 18in) = 18.000 in
PASS - Reinforcement provided exceeds minimum reinforcement required
Depth of compression block; ax = As_xB_prov fy / (0.85 f’c B) = 1.04 in
Neutral axis factor; 1 = 0.85
Depth to the neutral axis; cna_x = ax / 1 = 1.23 in
Strain in reinforcement; t_x = 0.003 (dx - cna_x) / cna_x = 0.03277
PASS - The section has adequate ductility (cl. 10.3.5)
Nominal moment strength required; Mnx = abs(Mx) / f = 130.062 kip_ft
Moment capacity of base; Mcapx = As_xB_prov fy [dx - (As_xB_prov fy / (1.7 f’c B))]
Mcapx = 337.502 kip_ft
PASS - Moment capacity of base exceeds nominal moment strength required
Moment design in y direction
Reinforcement provided; 20 No. 6 bars bottom and 20 No. 6 bars top
Depth of tension reinforcement; dy = h - cnom - xB - yB / 2 = 13.875 in
Area of tension reinforcement provided; As_yB_prov = NyB yB2 / 4 = 8.836 in2
Area of compression reinforcement provided; As_yT_prov = NyT yT2 / 4 = 8.836 in2
Minimum area of reinforcement; As_y_min = 0.0020 h L = 6.048 in2
Spacing of reinforcement; syB_prov = (L - 2 cnom) / max(NyB - 1, 1) = 8.526 in
Maximum spacing of reinforcement; smax = min(3 h, 18in) = 18.000 in
PASS - Reinforcement provided exceeds minimum reinforcement required
Depth of compression block; ay = As_yB_prov fy / (0.85 f’c L) = 1.03 in
Neutral axis factor; 1 = 0.85
Depth to the neutral axis; cna_y = ay / 1 = 1.21 in
Strain in reinforcement; t_y = 0.003 (dy - cna_y) / cna_y = 0.03131
PASS - The section has adequate ductility (cl. 10.3.5)
Nominal moment strength required; Mny = abs(My) / f = 162.685 kip_ft
Moment capacity of base; Mcapy = As_yB_prov fy [dy - (As_yB_prov fy / (1.7 f’c L))]
Mcapy = 491.833 kip_ft
PASS - Moment capacity of base exceeds nominal moment strength required
Project Job no.
13 No. 6 bars btm (9'' c/c), 12 No. 6 bars top (9'' c/c)
One way shear at d from column face