Escolar Documentos
Profissional Documentos
Cultura Documentos
London, UK
Book of Abstracts
Typeset by:
Causal Productions Pty Ltd
www.causalproductions.com
info@causalproductions.com
Session Index
EuMC01: Waveguide and SIW Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
EuMC02: Antenna Substrates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
EuMC03: IoT, UWB and Wireless Sensor Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
EuMC04: Systems and Applications 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
EuMC05: Millimetre-Wave Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
EuMC06: Metamaterial Circuits and Modelling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
EuMC07: Lossy and Multi-Band Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
EuMC08: Advanced 5G Technologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
EuMC09: Novel Electromagnetic Techniques for Microwave Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
EuMC10: Digital Predistortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
EuMC11: Passive Couplers and Dividers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
EuMC12: Recent Advances in the Field of Multipactor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
EuMC13: Advanced Technological Realisation of Microwave Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
EuMC14: Bio-Sensors, Gas Detection and Microfluidics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
EuMC15: Control Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
EuMC16: Frequency Selective Surfaces and Metasurfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
EuMC17: Antenna Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
EuMC18: Diode and Transistor Technology for THz Signal Generation and Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
EuMC19: Additive Manufacturing and Technological Approaches for Passive Components . . . . . . . . . . . . . . . . . . . . 17
EuMC20: Measurement and Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
EuMC21: High Power Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
EuMC22: Advanced Antenna Technologies and Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
EuMC23: Reconfigurable Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
EuMC24: Advances in Planar Filter Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
EuMC25: Advances in Antenna and Radiation Electromagnetic Modelling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
EuMC26: High Frequency Oscillators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
EuMC27: Systems and Applications 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
EuMC28: Diplexers and Reconfigurable Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
EuMC29: Measurement Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
EuMC30: High Frequency and Wideband Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
EuMC31: Metamaterial Absorbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
EuMC32: Advances in RFID Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
EuMC33: Passive Components for High Power Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
EuMC34: Tuneable and Reconfigurable Circuits and Structures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
EuMC35: Biomedical Imaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
EuMC36: High Performance Transceivers and Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
EuMC37: Stochastic Methods for Complex EMC Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
EuMC38: Antenna Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
EuMC39: Wireless Power Transfer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
EuMC40: Compact Implementation of Filters and Diplexers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
2
EuMC41: Techniques and Microwave Devices for Controlling Surface Waves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
EuMC42: Sensing and Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
EuMC43: Power Amplifier Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
EuMC44: Microwaves in the Americas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
EuMC45: Directive and Satellite Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
EuMC46: New Technologies for Filter Realization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
EuMC47: Applicators and Sensors for Medical Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
EuMC48: Energy Harvesting and Wireless Power Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
EuMC49: Photonic Technologies for Terahertz Systems Engineering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
EuMC50: APMC Selected Papers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
3
EuMC 2016 4–6 October 2016 London, UK
4
EuMC 2016 4–6 October 2016 London, UK
5
EuMC 2016 4–6 October 2016 London, UK
6
EuMC 2016 4–6 October 2016 London, UK
Microwave Spectroscopy: Novel Cost-Effective Inkjet Printed and Folded LTE Antenna for Vehicular
Approach to Measure Drip Loss in Pork Loin Application
Alex Mason 1 , Badr Abdullah 1 , Magomed Muradov 1 , B. Sanz-Izquierdo, S. Jun, J. Heirons, N. Acharya;
Olga Korostynska 1 , Ahmed Al-Shamma’a 1 , University of Kent, UK
Stefania Gudrun Bjarnadottir 2 , Kathrine Lunde 2 , Ole EuMC05-3, Time: 17:20
Alvseike 2 ; 1 Liverpool John Moores University, UK; A multi-band antenna suitable for Long-term Evolution (LTE) is
2 inkjet-printed, and then folded around a cylindrical form. The
Animalia, Norway
EuMC04-5, Time: 15:40 plastic cylinder is also printed using additive manufacturing
techniques, as a separate process. The antenna is based on a
Each stage of meat cutting and processing, from the moment planar wideband monopole radiator concept with an additional
of slaughter until packaging, results in the loss of water, the resonator for the LTE700 frequency band. The aim is to study the
amount of which is critical in determining both meat product potential of low-cost additive manufacturing (AM) techniques for
quality and value. Every 1% of lost water potentially costs a large the development of vehicular antennas. Two antennas have been
meat processing plant in the region of e50,000 per day. Current fabricated, one on paper substrate, and a second on polyethylene
standard practice of monitoring the loss of water from meat, or terephthalate (PET) substrate. The one on paper is tested as a
determining its drip loss, employs a destructive laboratory based planar monopole antenna on a large ground plane. The one printed
test which takes 24–72 hours to complete. This paper reports on PET is shaped onto the cylindrical form. The main aim is to
on feasibility studies of using microwave spectroscopy as a cost- investigate the use of low-cost inkjet printing techniques for the
effective approach to measure pork loin drip loss. Notably, the fabrication of disposable vehicular antennas that can be upgraded
developed novel microwave cavity sensor is capable of providing regularly. The antennas successfully operate at all LTE and mobile
an indication of drip loss within 6 minutes, while demonstrating frequency bands. Finite different time domain simulations com-
good correlation with the industry standard EZ-Driploss method pare well with measurements.
(R2 = 0.896).
Design of Electrically Small Antennas with
Inkjet-Printing Technology
EuMC05 : Millimetre-Wave Antennas
Room 7, 16:40–18:20, Tuesday 4th October 2016 Simone Genovesi, Filippo Costa, Agostino Monorchio;
Chair: Lorenz-Peter Schmidt, University of Erlangen Università di Pisa, Italy
Co-Chair: Ioan Lager, Delft University of Technology EuMC05-4, Time: 17:40
Electrically small antennas realized by employing ink-jet print
Compact Inkjet-Printed Broadband Filtennas with technology are investigated. The design of the radiating devices
Triple Bandnotch is based on a non-resonant antenna that is matched by placing
it in the close vicinity of a suitable Artificial Magnetic Conductor
Waqas Ahmad 1 , Djuradj Budimir 1 , Cedo Zlebic 2 ; (AMC). The AMC is tailored in order to exhibit a resonance close
1
University of Westminster, UK; 2 University of Novi to the desired working frequency. The AMC comprises only a few
Sad, Serbia miniaturized unit cells therefore the overall radiating structure is
EuMC05-1, Time: 16:40 compact.
Presented in this paper are the layout and results of a compact
inkjet-printed filtenna which is operational at a broadband fre-
Design and Development of a Compact Wearable
quency range, which includes the S-band, ISM and UWB frequencies. Dipole GPS Antenna
Alongside, the filtenna is able to reject the unwanted and inter- S. Ismail 1 , A. Barton 1 , P. Gaydecki 1 , Noushin
fering WiMAX 3.5 GHz, WLAN 5.8 GHz and ITU service 8.2 GHz
signal bands. The filtenna was simulated, printed using silver
Karimian 1 , S. Karimian 2 ; 1 University of Manchester,
nanoparticle ink on flexible Kapton substrate and then measured. UK; 2 CERN, Switzerland
The achieved simulation and measurement results agree reason- EuMC05-5, Time: 18:00
ably well against each other. Measured passband of the filtenna A compact GPS antenna has been designed and printed on a
is 1.6–10.85 GHz and triple bandnotch, measured at an average flexible polyimide substrate for integration into wearable devices.
value of 1.87 dB, are present at the unwanted bands. The current The design incorporates a planar dipole structure with optimised
distributions within the passband region and the bandnotch have geometry to minimise volume and maximise surface current
also been provided. Obtained radiation patterns show bidirectional distribution. The antenna has been simulated and measured
patterns in the E-plane and omnidirectional patterns in the H-plane. in open space and on a human wrist model; giving consistent
Additionally, the gain and efficiency of the filtenna have also been results as presented. The printed antenna, with dimensions of
presented; with the average values standing at 3.36 dBi and 89.8% 40mm×25mm (80% smaller than a wire dipole antenna with the
respectively for the passband region and having an average of -1.0 same characteristics) is a compact and mechanically robust device
dBi and 21.3% respectively for the triple bandnotch. capable of working inside a textile/nylon strap worn around the
wrist. The antenna is interfaced with an impedance matched GPS
Design and Performance of a Flexible and Conformal receiver to measure time-to-first-fix for practical purposes. The
PDMS Dipole Antenna for WBAN Applications antenna is integrated into wearable location tracking devices and
shows promising performance in comparison to commercially
Senan Morris, Anupam R. Chandran, Nick Timmons, available flexible GPS antennas, such as Round solutions NXP and
Jim Morrison; LYIT, Ireland Tao glass FXR.07.
EuMC05-2, Time: 17:00
The design, fabrication, and performance analysis of a 2.45GHz
dipole antenna embedded in a PDMS substrate is presented. This
design is particularly intended for wearable wireless body area
network applications where safe, conformal, and flexible anten-
nas are desirable. The performance of the PDMS antenna was
measured and compared to that of a standard copper wire dipole
antenna fabricated from copper wire through on-body testing and
simulation. Both antennas demonstrated comparable free space
performances. The PDMS dipole was tested in flexed conditions
and a minimal shift in resonance frequency was observed. To
demonstrate the antenna’s suitability for on-body communication,
two identical antennas were used to measure the on-body coupling
effect. The PDMS dipole antenna was shown to have a superior on
body coupling compared to the equivalent rigid copper wire dipole.
7
EuMC 2016 4–6 October 2016 London, UK
8
EuMC 2016 4–6 October 2016 London, UK
Lossy Reflection Mode Dual-Band Bandstop consumption of digital and analog circuits supporting individual
Prototype Network Based on Hybrid Elliptic antenna chains also has to be sufficiently low, given the large
Filtering Function number of antennas. In this paper, we extend power consumption
models for MaMi systems by evaluating different options such as
Soeung Socheatra, Peng Wen Wong, Cheab Sovuthy; precoder types, revisiting digital complexity estimates of different
Universiti Teknologi Petronas, Malaysia components, and incorporating the impact of improved designs,
EuMC07-2, Time: 17:00 e.g., future analog RF frontends. We illustrate the role of the
different components in the total system power for different MaMi
This paper presents a new hybrid dual-band bandstop (HDBBS) scenarios.
filter network based on predistortion reflection coefficient of
hybrid dual-band lowpass elliptic filtering function with low Q RF System Requirement Analysis and Simulation
resonators. It is shown that the hybrid filtering function is formed
by the product of lowpass and highpass elliptic filtering functions. Methods Towards 5G Radios Using Massive MIMO
By scaling the highpass cut-off frequency, the inner passband of Tommi Tuovinen, Nuutti Tervo, Aarno Pärssinen;
HDBBS can be adjusted to achieve any desired narrow band. Mi-
University of Oulu, Finland
crostrip prototype is designed and fabricated to prove the concept.
EuMC08-2, Time: 17:00
The simulated and measured results show a good agreement.
Methods of performing RF system requirement analysis towards
Nonuniform Scaling Technique for Parallel-Coupled 5th generation massive multiple-input multiple-output system
Pairs Lossy Filters are described. For the system analysis, digital signal processing
is abstracted to minimum SNR requirement definitions and RF
Liang-Feng Qiu 1 , Lin-Sheng Wu 1 , Wen-Yan Yin 2 , Junfa system SNR is described based on realistic but highly simplified
Mao 1 ; 1 Shanghai Jiao Tong University, China; transmitter and receiver performance related to output and input
2 power levels, respectively. In addition, a simple link adaptation
Zhejiang University, China
model is created for dynamic simulation tasks. As the contribution
EuMC07-3, Time: 17:20 of antenna array is seen to become necessity in cm- and mm-wave
A nonuniform scaling technique is proposed for the synthesis of bands for 5G systems, we show ways to include antenna modelling
lossy filters realized by parallel-coupled pairs. By adding two or in system analysis. By using these analysis methods, we have
more non-resonating nodes for each coupled pair to nonuniformly generated a link level simulator that can be used for system anal-
distribute the losses, more design freedom can be provided to ysis using different abstractions of antennas. Finally, it is shown
adjust Q-factors. For the fourth-order generalized Chebyshev that even simple RF models need to have certain implementation
filter, a uniform Q is obtained with Q=490. And for a 10-4-4 lossy related details in order to provide good accuracy in link budget
filter, the insertion loss is reduced by 7 to 9 dB when the highest Q and operation range analysis.
is fixed. The synthesized filters become more realizable.
Signal Decomposition Technique for Enhanced
A Fully Tunable C-Band Reflectionless Bandstop Power Added Efficiency of OFDM Transmitters and
Filter Using L-Resonators its Application for MIMO Systems
Jia-Chi Samuel Chieh, Jason Rowland; SPAWAR Yushi Shirato, Masahiro Muraguchi; Tokyo University
Systems Center Pacific, USA of Science, Japan
EuMC07-4, Time: 17:40 EuMC08-3, Time: 17:20
This paper presents a fully tunable reflectionless bandstop filter The authors have proposed the signal decomposition technique
using multi-section L-Resonators. The bandstop filter is designed as one of the powerful solution to mitigate the large PAPR to be
to operate in the C-Band, tunable from 3.96 –4.4 GHz with greater addressed in OFDM transmitters especially on mobile terminals.
than 20 dB of in-band rejection and a return loss of better than In order to enhance the receiver SNR, the simple noise elimination
8 dB across the full tuning range. Simulation and measurement techniques working together with the signal decomposition have
results are presented. also been proposed, that eliminates the noise added on the decom-
posed constant amplitude on-off-signals by taking advantage of the
Practical Realisation of Multiband Planar Filters knowledge of their constant amplitude at the receiver. It is shown
Based on a Reactance Transform Method that the proposed signal decomposition technique improves the
PAPR by 4dB and doubles the PAE at the CCDF (Complementary
Riana Geschke, Leokadia Nepaya; University of Cape Cumulative Distribution Function) of 1%. In addition to the analysis
Town, South Africa of receiver SNR, the BER performances are demonstrated when the
EuMC07-5, Time: 18:00 decomposed signals are transmitted over a 2×2 MIMO system.
A recently proposed reactance transform method using rational
mapping functions to synthesise multiband filtering functions is Robustness of Filter Bank Multicarrier Signals to
applied to dual-band filter design. The paper focuses on practical Power Amplifier Nonlinearities
aspects related to the physical implementation on multilayer
Agathe Valette 1 , Myriam Ariaudo 2 , Sylvain Traverso 1 ,
substrate. As is shown, the selectivity is influenced not only by
the order of the basis filter, but also by the number of bands, Inbar Fijalkow 2 , Lounis Zerioul 2 ; 1 Thales
the spacing of the bands and the relative bandwidths. During the Communications & Security, France; 2 ETIS (UMR 8051),
standard numerical tuning based on a group delay method, the France
use of group-delay based tuning requires special care. A de-tuning EuMC08-4, Time: 17:40
method is used for efficient design.
Filter Bank MultiCarrier (FBMC) is now a recognized alternative
to Orthogonal Frequency Division Multiplexing (OFDM) for 5G
EuMC08 : Advanced 5G Technologies communications and cognitive radio thanks to its improved
spectral occupancy. However, the RF front-end is not linear and
Room 4, 16:40–18:20, Tuesday 4th October 2016
distorts the signal. In this article, we study the impact of the Power
Chair: Arne Jacob, Hamburg University of Technology Amplifier (PA) on the signal’s spectral performances, first by using
Co-Chair: Christian Person, Telecom Bretagne a theoretical model of PA, and then by experimental measurements
to compare them with an OFDM signal. The FBMC ability to bear
Massive MIMO for Energy-Efficient Communications notches in the spectrum is confirmed, in spite of the PA, and
improvement with respect to OFDM measured.
Claude Desset, Björn Debaillie; imec, Belgium
EuMC08-1, Time: 16:40
Massive MIMO (MaMi) is expected to become a key technology for
5G systems, providing a large capacity increase at reduced total
radiated power. However, besides the radiated power, the power
9
EuMC 2016 4–6 October 2016 London, UK
Pragmatic OAM with Polarization Multiplexing Modeling of Inhomogeneous and Lossy Components
Transmission for Future 5G Ultra-High Capacity by the BI-RME Method and the Segmentation
Radio Technique
Eisaku Sasaki 1 , Masashi Hirabe 1 , Tsuguo Maru 1 , Simone Battistutta, Maurizio Bozzi, Marco Bressan,
Nader Zein 2 ; 1 NEC, Japan; 2 NEC, UK Marco Pasian, Luca Perregrini; Università di Pavia,
EuMC08-5, Time: 18:00 Italy
A new orbital angular momentum (OAM) mode and polarization EuMC09-3, Time: 17:20
multiplexing transmission system in the millimeter-wave range is A novel approach for the analysis of inhomogeneous and lossy
proposed for future Ultra high capacity backhaul/fronthaul radio. microwave circuits is presented in this paper. The proposed tech-
Our theoretical analysis reveals that all the OAM modes can be nique rely on the segmentation of the structure into homogeneous
used with polarization transmission while maintaining high degree boxed building blocks. The frequency behavior of each block is
of orthogonality. Furthermore, we show that links in the order represented by a generalized admittance matrix relating the RWG
of 100m can be achieved using the OAM lower-order modes in basis functions adopted to expand the magnetic surface current
the millimeter-wave bands. A combination of an antenna array on interconnection surfaces. The generalized admittance matrices
and a Butler matrix can encode and decode multiple OAM modes. are determined in the form of a pole-expansion by the Boundary
We achieved 7-m transmission with two-modes multiplexing with Integral-Resonant Mode Expansion (BI-RME) method, adopting the
a prototype of our system at 5.2 GHz. This translates to over Ewald technique to efficiently calculate the Green’s function of the
100m when applied to the mmwave bands. The experimental box. The frequency response of the whole component is obtained
results agree well with the theoretical analysis, and are verifies our by cascading the admittance matrices of the building blocks. The
estimation of available link distance. analysis of two waveguide components is reported and discussed
to demonstrate the accuracy of the proposed technique.
Plamen I. Dankov; Sofia University, Bulgaria This paper proposes mixed-potential integral equation (MPIE)
with equivalent surface impedance for 3-D model of on-chip
EuMC09-1, Time: 16:40
passive components in multilayered media. The equivalent surface
The concept and procedure for determination of the equivalent impedance model depicting the loss characteristics of conductors
dielectric constant of different planar transmission lines on with finite-scale cross section is derived from boundary integral
anisotropic substrates have been considered in this paper. The equation (BIE) in 2-D. The governing mixed-potential integral
obtained results have been presented for several planar lines with equation is solved through method of moments with Rao-Wilton-
different ratio between the parallel and perpendicular electric Glisson(RWG) and Rooftop basis functions. During the matrix
fields. Finally, a preliminary discussion has been given for the filling procedure of method of moments (MoM), the spatial-domain
efficiency of the 3-D numerical design by replacement of different Green’s functions with observation and source points in different
simple planar structures on anisotropic substrate with their planar layers are interpolated from values in the adjacent layers, which
isotropic equivalents. has been precalculated using discrete complex image method.
Numerical results validate the precision of the proposed method.
A Virtual Lossy Dielectric Model with Composite
Boundary Conditions for the Analysis of Substrate Rapid Adjoint-Based Design Optimization of
Integrated Waveguides Compact Microwave Structures Using Multi-Fidelity
Carlos A. Leal-Sevillano 1 , Jorge A. Ruiz-Cruz 2 , José R. Simulation Models
Montejo-Garai 3 , Jesús M. Rebollar 3 ; 1 RYMSA ESPACIO, Slawomir Koziel, Adrian Bekasiewicz; Reykjavik
Spain; 2 Universidad Autónoma de Madrid, Spain; University, Iceland
3 EuMC09-5, Time: 18:00
Universidad Politécnica de Madrid, Spain
EuMC09-2, Time: 17:00 Design closure of compact microwave structures requires — for
A new model for the characterization of substrate integrated waveg- the sake of reliability — utilization of full-wave electromagnetic
uides is presented based on the analysis of a non-homogeneous (EM) simulation models. The reason is that due considerable
closed waveguide with composite boundary conditions and a cross-coupling effects in tightly arranged layouts, neither analyti-
section of virtual lossy dielectric. The performance of the closed cal nor equivalent circuit models can provide sufficiently accurate
waveguide simulates the substrate integrated waveguide, once performance evaluation of miniaturized circuits. At the same time,
the parameters of the lossy dielectric section are adjusted (width, high computational cost of accurate EM analysis makes the di-
dielectric permittivity and magnetic permeability). This simple mension adjustment process challenging, especially for traditional
model gives physical insight into the propagation in the substrate methods based on parameter sweeps but also for conventional
integrated waveguide and it is inspired in the different field numerical techniques. In this paper, low-cost optimization of
regions which appear in the open problem. Another important compact structures is demonstrated using gradient search with
feature of this model is that it allows the characterization of adjoint sensitivities as well as multi-fidelity EM simulation models.
the open substrate structure, including the radiation loss, with The process is arranged sequentially, with the largest steps taken
an equivalent closed waveguide, where well-known and efficient at the level of coarse-discretization models. Fine tuning of the
full-wave methods can be applied. Thus, this model is suited for design is realized with the models of higher fidelity. Switching
the accurate analysis and design of devices in substrate integrated between the models is controlled by adaptively adjusted termi-
waveguide, as it is shown with different structures. The model nation conditions. This allows for considerable reduction of the
is able to predict the radiation loss when the structure has large design cost compared to single-level optimization. Our approach
distance between posts. The agreement between measured results is illustrated using a compact microstrip rat-race coupler with
and the simulations are also confirmed with a bandpass filter. two cases considered, i.e., (i) bandwidth enhancement, and (ii)
minimization of the structure size. In both cases, the optimization
cost corresponds to just a few high-fidelity EM simulations of the
coupler.
10
EuMC 2016 4–6 October 2016 London, UK
11
EuMC 2016 4–6 October 2016 London, UK
28GHz Wilkinson Power Divider with λ/6 nonlinear phenomena. On the multipactor, we introduce a self-
Transmission Lines in 65nm CMOS Technology developed time-domain method to solve Maxwell equations and
Newton-Lorentz equations. Subsequently, we discuss the nonlinear
Hyun-Myung Oh 1 , Jeong-Taek Lim 1 , Jae-Eun Lee 1 , phenomena caused by interaction between the electromagnetic
Eun-Gyu Lee 1 , Jooseok Lee 2 , Sun Kyu Choi 2 , Chul Woo (EM) fields and charged particles in the frequency domain. On
Byeon 2 , Ju Ho Son 2 , Jeong Ho Lee 2 , Choul-Young the passive intermodulation, we give an EM-circuit scheme to
Kim 1 ; 1 Chungnam National University, Korea; numerically analyze the nonlinear features of PIM induced by the
2 nonlinear contacts. Some numerical and experimental examples
Samsung, Korea validate the efficiency of the proposed methods.
EuMC11-3, Time: 17:20
This paper presents a method to design Wilkinson power divider Multipactor Testing and Emerging Qualification
using transmission lines less than quarter wave length. The Protocols
transmission lines less than quarter wave length of Wilkinson
power divider is compensated by parallel capacitors. Therefore, O. Monerris Belda 1 , D. Argilés 1 , Vicente E. Boria 1 , B.
this is helpful to reduce circuit size and to enhance productivity. Gimeno 1 , David Raboso 2 , P. Angeletti 2 ; 1 Val Space
The measurement results reveal that the insertion loss is 0.82 dB Consortium, Spain; 2 ESA, The Netherlands
at 28 GHz. The measured return loss is better than 10 dB in the
EuMC12-2, Time: 09:20
whole band of interest (20 – 40 GHz). The Wilkinson power divider
is fabricated using 65 nm 1P9M CMOS technology. Interest on high RF power breakdown phenomena has been grow-
ing in recent years. Microwave vacuum devices are being used
Concept for the Implementation of Very High in space and on many terrestrial applications, where undesired
multipactor effects can degrade their performance and features.
Directivity and Decade Bandwidth in Compact Therefore, multipactor testing is advancing in several areas, and
Microstrip Directional Couplers particularly in order to cover the gap between the classical single
Alexander Alt 1 , Nikolai Schwerg 2 , Christian Wangler 3 , carrier scenarios to real world environment. Multicarrier and
digital modulations also represent a challenge from the technical
Daniel Gruner 3 ; 1 Cardiff University, UK; 2 CERN, and regulatory point of view. This work presents the most recent
Switzerland; 3 TRUMPF Hüttinger, Germany advances on the multipactor testing, and describes a state of the
EuMC11-4, Time: 17:40 art multipactor test bed used for navigation payload testing.
A concept to induce a very high directivity and a flat coupling over
a large bandwidth in compact microstrip directional couplers is Experimental Verification of Multipactor Prediction
presented. By introducing lumped element based compensation Methods in Multicarrier Systems
networks at the isolated and coupled port of a simple electrically
short directional coupler, a very high directivity and a constant
Sergio Anza 1 , Carlos Vicente 1 , Jordi Gil 1 , Vicente E.
coupling over enormous bandwidths up to one decade can be Boria 2 , David Raboso 3 ; 1 Aurora Software and Testing,
achieved. With a design focusing on flat coupling, a high power Spain; 2 Universidad Politécnica de Valencia, Spain;
directional coupler with a coupling length of only 50 mm, less then 3
ESA, The Netherlands
λ/25 at the middle of the band, was shown to have a coupling in
EuMC12-3, Time: 09:40
the range of 52.11 dB±0.05 dB from 37.4 MHz to 200 MHz. In a
further design step with focus on directivity and coupling flatness The main objective of this work is to experimentally check the
at the same, the coupling stayed within 55.25 dB ± 0.35 dB from performance of the most popular multipactor breakdown predic-
22 MHz to 164 MHz with a directivity of greater than 50 dB (30 dB) tion method for multi-carrier signals, the 20-gap-crossing rule.
from 35 MHz to 84 MHz (20 MHz to 187 MHz). Extreme frequency-times-gap and carrier combinations have been
chosen. The nonstationary multipactor theory is proposed as an
Novel Tight Coupling and High Directivity λ/4 alternative. Results show that the 20-gap-crossing rule performs
radically different depending on each specific case. It can be
Partially-Narrowed and Slotted Coupled Line and its conservative in excess, or clearly not conservative. Comparing the
Application two methods, the prediction accuracy of the nonstationary theory
Motomi Abe, Yukihiro Tahara, Naofumi Yoneda, Hideji is much better than the 20-gap-crossing rule.
Takeda, Tetsu Owada; Mitsubishi Electric, Japan
Multipactor in 4 Rod Crab Cavities
EuMC11-5, Time: 18:00
A new λ/4 microstrip coupled line (MSCL) partially-narrowed
G. Burt 1 , D. Constable 1 , B. Hall 2 ; 1 Lancaster
and slotted the other part to obtain both tight coupling beyond University, UK; 2 HZB, Germany
machining limitations and high directivity is proposed. And a EuMC12-4, Time: 10:00
multi-element broadband coupler using the proposed MSCL as the Multipactor is a limiting factor in many SRF cavities due to the
tightest coupling element is presented. A multi-element 10 dB additional heat load and power absorption. In this paper we
coupler is designed, and the performances, which are -10.3±0.9dB study multipactor in 4 rod crab cavities, which have deflecting
coupling and greater than 20dB isolation over 162% of the band- rather than accelerating fields. The particles are tracked in CST
width. Particle Studio for three different secondary emission yields (SEY)
to differentiate between hard and soft multipacting barriers. It is
shown that multipacting barriers exist at a transverse voltage of 2
EuMC12 : Recent Advances in the Field of MV for high SEY materials but that these trajectories do not appear
Multipactor with lower SEY materials suggesting that they will process away.
Room 1, 09:00–10:40, Wednesday 5th October 2016
Chair: George Goussetis, Heriot Watt University
Co-Chair: Vicente Boria, Universidad Politécnica de Valencia
12
EuMC 2016 4–6 October 2016 London, UK
Helical Resonator with Modulated Radius for V-Band Waveguide Bandpass Filter with Wide
Improved Multipactor Threshold: Numerical and Stopband and Harmonics Absorption
Experimental Results Richard V. Snyder, Simone Bastioli; RS Microwave, USA
Giuseppe Salza 1 , George Goussetis 1 , Carlos Vicente 2 , EuMC13-3, Time: 09:40
Marta Reglero 3 , Máriam Taroncher 3 , Vicente E. This paper presents the design of a millimeter-wave waveguide
Boria 3 , Nikolas Sidiropoulos 4 , Jaione Galdeano 5 , bandpass filter with wide spurious free stopband, and absorptive
properties for the second and third harmonics. The filter consists
Marco Guglielmi 3 , Efstratios Doumanis 6 , Savvas of the combination of a reflective evanescent mode filter and a ab-
Kosmopoulos 1 ; 1 Heriot-Watt University, UK; 2 Aurora sorptive leaky-wave filter, the latter being employed as an harmonic
Software and Testing, Spain; 3 Universidad Politécnica pad. Specifically, while the reflective filter provides the required
de Valencia, Spain; 4 SES, Luxembourg; 5 ESA, The input-to-output rejection of the harmonics, the absorptive filter
provides the required matching, thus preventing the harmonics
Netherlands; 6 Nokia, Ireland from being reflected at the input port. The absorptive filter is
EuMC12-5, Time: 10:20 properly designed and analysed in HFSS so as to absorb all of the
This contribution presents numerical and experimental results on TE and TM waveguide modes which are in propagation up to 140
a 2nd order UHF filter prototype that exploits helical resonators GHz. The experimental results of this filter will be presented at the
with modulated radius. Earlier works have proposed this geom- Conference.
etry as means to enhance power handling without significantly
compromising on unloaded quality factors. Here we present a Sensitivity Analysis of a 3-D Printed Low-Cost
detailed prototype design and evaluate its performance at low Compact Waveguide Low-Pass Filter
and high power levels using both rigorous numerical tools as
well as the results of an experimental test campaign. Low power F. Teberio, A. Gomez-Torrent, I. Arregui, J.M. Percaz, I.
results include CST predictions against measurements on a Vector Arnedo, M. Chudzik, T. Lopetegi, M.A.G. Laso;
Network Analyser. High power results include predictions from Universidad Pública de Navarra, Spain
the tool SPARK3D as well as the outcome of a test campaign at the EuMC13-4, Time: 10:00
ESA-VSC laboratories. Despite some discrepancies in the power
handling predictions, which are largely attributed to uncertainties A sensitivity analysis of a very compact low-loss waveguide low-
associated with prototyping, the presented results indicate that pass filter and its classical counterpart, a waffle-iron filter, is
there is margin for significant performance improvement by shown in this paper. The tolerance analysis of the previous filter
adopting the large gap approach for this class of filters. design methods will be analyzed, compared, and discussed from
the predicted manufacturing yield point of view. It is found that
the presented filter allows relaxed fabrication tolerances which let
EuMC13 : Advanced Technological us manufacture it using a low-cost 3-D printer. Finally, in order to
demonstrate the robustness of the design method, a lightweight
Realisation of Microwave Filters prototype manufactured by stereo-lithography (SLA) 3-D printing
Room 4, 09:00–10:40, Wednesday 5th October 2016 in photo-polymer resin and then coated with copper is shown. The
Chair: Miguel A.G. Laso, Universidad Pública de Navarra measured frequency response shows an excellent agreement with
Co-Chair: Richard Snyder, RS Microwave the simulations.
Dual-Band Bandpass Filter Using Helical Resonators 3D Printed Substrate Integrated Waveguide Filters
with Locally Controlled Dielectric Permittivity
Yahui Wu, Ruwan Gajaweera, Jeremy Everard;
University of York, UK Cristiano Tomassoni 1 , Ryan Bahr 2 , Manos Tentzeris 2 ,
EuMC13-1, Time: 09:00 Maurizio Bozzi 3 , Luca Perregrini 3 ; 1 Università di
This paper demonstrates non-uniform pitch helical resonators for Perugia, Italy; 2 Georgia Institute of Technology, USA;
3
realization of dual-band bandpass filters. By modifying the pitch Università di Pavia, Italy
and coil diameter of conventional uniform pitch helical resonators, EuMC13-5, Time: 10:20
the desired dual-band frequencies can be obtained. The external
This paper presents, for the first time, the implementation of SIW
coupling and inter-resonator coupling structure are also illustrated.
filters by 3D printing manufacturing technique. The possibility of
A non-uniform pitch helical resonator was designed and fabricated
locally modifying the effective dielectric permittivity by changing
with unloaded quality-factor (>900) for both passbands. A 2nd
the infill factor of the printing process is exploited and demon-
order Butterworth filter that has passbands at 840 MHz and 2590
strated. This allows adopting a single filament material to obtain
MHz has been designed. The simulation results show that the filter
different permittivity values in the various portions of a microwave
has a good selectivity with 6% and 4.3% fractional bandwidth at the
component. Moreover, the variation of the infill factor allows
passbands, respectively. The good power handling capability also
reducing the dielectric loss tangent of the material: this permits
suggests that the filter is applicable for microcell/picocell LTE base
increasing the quality factor of cavity filters even by using the
stations.
same material. These features are illustrated through the design
and experimental verification of two SIW filters, with identical
Monolithic Ceramic Waveguide Filter with Wide
frequency response but fabricated with different infill factor of the
Spurious Free Bandwidth printing process, via fused deposition modeling (FDM).
Sharjeel Afridi, Muhammad Sandhu, Nutapong Somjit,
Ian C. Hunter; University of Leeds, UK
EuMC13-2, Time: 09:20
This paper presents two new design techniques for improving
the spurious performance of an integrated ceramic waveguide
filter without compromising its figure-of-merit e.g. Q-factor.
Non-uniform width ceramic waveguide resonators are used to
spread the undesired higher order mode frequencies along with
ceramic TEM resonators reducing the overall cutoff frequency of
the resonators. The proposed designs offer 60–65% better spurious
performance in comparison with uniform width integrated ceramic
waveguide filter. Simulated results for a six pole Chebyshev
integrated non-uniform width ceramic waveguide filter and an
integrated evanescent mode non-uniform width ceramic waveguide
filter are presented in this paper showing improved spurious
performance.
13
EuMC 2016 4–6 October 2016 London, UK
14
EuMC 2016 4–6 October 2016 London, UK
15
EuMC 2016 4–6 October 2016 London, UK
The proposed design concept starts with a second order spatial Large Depth-of-Field Wideband Pseudo-Bessel Beam
filter with the ability to deliver selective filtering response for Antenna
arbitrary FSS thicknesses. Furthermore, low-profile design and in-
verter layers provide simple implementation solution in designing
Yi Cheng Zhong, Yu Jian Cheng; UESTC, China
tunable spatial filters. In this paper, we demonstrate second-order EuMC17-2, Time: 09:20
low-profile band pass spatial filter operating at S-band with fast A wideband pseudo-Bessel beam antenna with a large non-
in-band shielding switch capability within 20 to 100 ns for the diffraction range is proposed in this paper. A phase shift surface
protection of electromagnetic systems. The proposed tunable (PSS) with controllable phase shift versus frequency response is
spatial filter is integrated with discrete plasma shells strategically employed. Thus, the Bessel beam can be realized over a wide-
located to effectively switch the transfer function of the filter. The band. Measurement indicates that the relative bandwidth of the
coupling layer, a metallic strip wire serves dual purpose in not only Bessel beam antenna is more than 13.7% at Ka-band and the
controlling the thickness of the filter but also as a biasing network non-diffraction range is more than 150 times of the wavelength
for the active components. To validate the proposed technique, at the center frequency of 29 GHz. Good axial symmetry can be
a prototype tunable filter operating at 3 GHz with periodicity achieved because both cellular topology and hexagonal element
and overall thickness in the order of λ0 /10 has been fabricated are used.
and measured inside a waveguide. Simulation and measurement
results are proven to be in good agreement. On the Design of a Dual Polarized Leaky Lens
Antenna for Wideband FPA Applications
Efficient 2-D Leaky-Wave Antenna Configurations
Ozan Yurduseven, Nuria Llombart, Ioan E. Lager,
Based on Graphene Metasurfaces
Andrea Neto; Technische Universiteit Delft, The
Walter Fuscaldo, Paolo Burghignoli, Paolo Baccarelli, Netherlands
Alessandro Galli; Università di Roma “La Sapienza”, EuMC17-3, Time: 09:40
Italy This contribution presents the design and measurements of a
EuMC16-5, Time: 10:20 wideband dual polarized leaky lens antenna. The antenna is
Different configurations of leaky-wave antennas (LWAs) based on composed of two crossed slots fed by two orthogonal microstrips.
graphene metasurfaces are studied. The electronic properties of The crossed microstrips are fed differentially in order to couple
a graphene metasurface in the low THz range are investigated the radiation into the slots. Then the slot antenna feeds a dielectric
in details in order to discuss the reconfigurability features of lens to achieve directive patterns. In this work, the proposed
the presented structures. A simple exact formula for evaluating leaky lens antenna is optimized to achieve high aperture efficiency
the ohmic losses related to the surface plasmon polariton (SPP) with clean symmetric patterns in both polarizations exceeding an
propagation along a suspended graphene sheet is given. This octave bandwidth to be used for tightly spaced wideband Focal
allows us to explain the low efficiency of reconfigurable antennas Plane Arrays (FPAs). The concept is validated by the primary field
based on SPPs along graphene metasurfaces. Then, the radiative measurements inside the lens and by the GRASP simulations of the
performance and relevant losses of graphene Fabry-Perot cavity FPA.
antennas (FPCAs) based on leaky waves (LWs) are investigated in
details and compared to previous solutions based on SPPs. In A Study of Design Method of Circular Patch Array
particular, a single-layer structure, i.e., a grounded dielectric slab Absorber for Oblique Incidence
covered with a graphene metasurface, and a multilayered structure,
i.e., a substrate-superstrate antenna in which the graphene meta- D. Kitahara 1 , H. Yoshiizumi 1 , R. Suga 1 , O.
surface is embedded at a suitable position within the substrate, are Hashimoto 1 , K. Araki 2 ; 1 Aoyama Gakuin University,
considered. The results show that the proposed LW solutions in Japan; 2 Tokyo Institute of Technology, Japan
graphene FPCAs allow for considerably reducing ohmic losses, thus EuMC17-4, Time: 10:00
significantly improving the efficiency of the proposed radiators.
In this paper, a design method of a circular patch array absorber for
oblique incidence is proposed. The incident angle characteristics of
EuMC17 : Antenna Design its input impedance can be designed by the arrangement period of
the patches. The absorption characteristics by using an equivalent
Room 17, 09:00–10:40, Wednesday 5th October 2016
circuit simulation agreed well with that by an electromagnetic
Chair: Matthias Hein, University of Ilmenau simulation, and the effectiveness of the proposed design method
Co-Chair: Marco Pasian, University of Pavia is indicated.
Stub-Loaded Resonator-Fed Filtering Patch Antenna A Transmission Line Model for Co-Designed
with Improved Bandwidth Slot-Coupled Dielectric Resonator Antennas
Chunxu Mao 1 , Steven Gao 1 , Yi Wang 2 ; 1 University of Lars Ohlsson, Daniel Sjöberg, Lars-Erik Wernersson;
Kent, UK; 2 University of Greenwich, UK Lund University, Sweden
EuMC17-1, Time: 09:00 EuMC17-5, Time: 10:20
A method of designing a patch antenna with wideband and filtering Co-design of monolithically-integrated millimetre-wave front-ends
characteristics is proposed in this paper. Different from traditional and antennas is alleviated by accurate device models. In this paper,
aperture-coupled patch antenna, a stub loaded resonator (SLR) a novel transmission line model for slot-coupled dielectric res-
is employed as the feed. This coupled SLR-patch produces three onator antennas is proposed and verified. It describes distributed
reflection zeros (dual-mode from the SLR and one from the patch) interaction between the coupling-structure and the radiating
and therefore a wider bandwidth. Due to the resonant property dielectric body of the antenna. This model thereby provides a sim-
of the SLR, the antenna exhibits a filtering performance and good plistic and intuitive description of the main radiation mechanism.
out-of-band rejection. This integration approach eliminates the It fits with excellently to numerical full-wave simulation results,
50 Ohm interfaces between the traditionally cascaded filter and both in terms of input characteristics and radiation efficiency.
antenna. This contributes to a more compact and simplified Furthermore, the radiated signal fidelity predicted by the model
RF frontend. Methods to control the modes of the SLR are in- is found in line with experimental results from a co-designed
vestigated. The simulation and measurement results agree well millimetre-wave wavelet transmitter. This antenna model promise
with each other, showing an excellent performance in terms of further development into a generic scalable model that will reduce
bandwidth, frequency selectivity and radiation patterns. the need for iterative simulations.
16
EuMC 2016 4–6 October 2016 London, UK
17
EuMC 2016 4–6 October 2016 London, UK
A Compact Ka-Band Waveguide Orthomode comprises of four section branch line couplers and power combin-
Transducer Fabricated by 3-D Printing ers, which are integrated to realize the testset. It has one port for
an RF input, one for an arbitrary DUT, and remaining two ports for
Xiaobang Shang 1 , Paul Klasmann 2 , Michael J. incident (reference) and reflected power detectors. The couplers
Lancaster 1 ; 1 University of Birmingham, UK; 2 Elite are designed to provide uniform magnitude and phase character-
Antennas, UK istics that help obtaining isolation above 30 dB between the RF
EuMC19-3, Time: 12:00 input port and reflected power detector. The power combiners
are designed to provide good matching between the couplers and
This paper presents an orthomode transducer (OMT) fabricated the DUT/reference detector ports, and also to distinguish matched
using 3-D printing. The OMT is designed to operate at two fre- and mismatched loads on Port 2. The designed testset achieves
quency bands, with each band passing an orthogonal polarization. raw uncalibrated load dynamic range of 20 to 59 dB between 1.68
For one polarization the band is 17–22 GHz and the other 27–31 and 2.54 GHz. The high dynamic range makes the designed testset
GHz. Both polarizations are combined into a common port with suitable for use in a narrow band network analyzer.
square waveguide cross section. To facilitate the measurement,
two tapered waveguide transitions are designed to convert the
square waveguide port to standard WR-42 and WR-28 waveguides.
Meander Type Transmission Line Design for
The OMT and the waveguide transitions are made from polymer On-Wafer TRL Calibration
using stereolithography based 3-D printing and a 5 μm thick Manuel Potéreau 1 , Marina Deng 1 , Christian Raya 2 ,
copper layer is deposited on them. The experimental results of the
OMT are compared with simulations and discussed. Bertrand Ardouin 2 , Klaus Aufinger 3 , Cédric Ayela 1 ,
Magali De Matos 1 , Arnaud Curutchet 1 , Sébastien
Design of 3D Printed Plastic Modular Filters Frégonèse 1 , Thomas Zimmer 1 ; 1 IMS (UMR 5218),
Jérémy Saucourt, Nicolas Jolly, Aurélien Périgaud, France; 2 XMOD Technologies, France; 3 Infineon
Olivier Tantot, Nicolas Delhote, Stéphane Bila, Serge Technologies, Germany
EuMC20-2, Time: 11:40
Verdeyme; XLIM, France
EuMC19-4, Time: 12:20 An on-wafer TRL methodology based on meander type transmis-
sion lines was developed in the perspective of automated on-waver
The design of 3D printed plastic modular filters is presented in
calibration. The TRL calibrations using meander lines and standard
this paper. The proposed principle allows the user to choose at
straight lines showed no significant difference when applied to
will the order of a bandpass filter by plugging as much blocks
characterize a single SiGe HBT up to 110 GHz under multiple bias
(resonators) as needed. The conception and results of a 4-poles
points.
filter are discussed. Because of their simplicity, these filters have
the potential to be used for microwave practical courses thanks
to good performances, quick and easy assembly, easy tuning and
A New Calibration Method for the Measurement of a
maintenance and finally low cost manufacturing. Multiport Microwave Tomography System with a
2-Port Vector Network Analyzer
Plastic and Metal Additive Manufacturing
Marc Zimmermanns, Ilona Rolfes, Malte Mallach,
Technologies for Hyperfrequency Passive
Patrik Gebhardt, Thomas Musch; Ruhr-Universität
Components up to Ka Band
Bochum, Germany
Johann Sence 1 , William Feuray 1 , Aurélien Périgaud 1 , EuMC20-3, Time: 12:00
Olivier Tantot 1 , Nicolas Delhote 1 , Stéphane Bila 1 , A new method for the calibration of a multiport microwave to-
Serge Verdeyme 1 , Jean-Baptiste Pejoine 2 , mography (MWT) system measured with a 2-port vector network
René-Philippe Gramond 3 ; 1 XLIM, France; 2 I3D Concept, analyzer (VNA) is presented. The two VNA ports are mapped to the
eight input ports of the MWT system by means of a switching net-
France; 3 Plateforme Technologique RAMSEIS, France work. This contribution deals with the calibration of the switching
EuMC19-5, Time: 12:40 matrix. In consideration of the application, the proposed approach
This paper illustrates the different possibilities given by additive reduces the mechanical complexity of the calibration procedure
manufacturing technologies for the creation of hyperfrequency significantly, by eliminating transmission connections between
devices. Firstly a characterization campaign has been made on nonadjacent ports. This enables a simplified automation of the
common plastics used by 3D printer using the Fused Deposition measurement setup. In addition, every step of the calibration
Modeling (FDM) and material jetting (Polyjet) technologies. The procedure utilizes self-calibration techniques. Thereby, increasing
impact of the manufacturing strategy (high speed or high accu- the diversity of the procedure. Furthermore, the proposed method
racy) on the part roughness, as well as on the dielectric material reduces the number of measurements required for the calibration
permittivity and loss tangent has been specifically studied at 10 in relation to comparable methods.
and 16 GHz. The conductivity of a coating based on a silver
paint has also been characterized on such plastic parts. These Measurement Setup for the Analysis of Broadband
plastic materials and coating have been used for the creation Frequency-Modulated Signals
of a quasi-elliptic bandpass filter centered at 6 and 12 GHz and
compared to a similar filter made of stainless steel by selective Christian Zech, Benjamin Baumann, Axel Hülsmann,
laser melting. Finally, a compact rectangular TE10 to circular TE01 Jutta Kühn, Michael Schlechtweg, Oliver Ambacher;
mode converter also made by selective laser melting is illustrated Fraunhofer IAF, Germany
here from 28 to 36 GHz as a final demonstrator.
EuMC20-4, Time: 12:20
Extreme linear broadband radio frequency chirp generation is of
EuMC20 : Measurement and Calibration fundamental interest, e.g. for high-resolution radar systems. The
Room 13, 11:20–13:00, Wednesday 5th October 2016 chirp linearity is essential for the accuracy of radar measurements.
A linearity analysis is presented in this paper. The developed
Chair: Nick Ridler, NPL
measurement setup is discussed and measurement results are
Co-Chair: Juan Mari Collantes, UPV-EHU
shown. The results are compared with commercially available mea-
surement equipment. An analysis bandwidth of at least 5.4GHz in
A Four Port Microstrip Testset for Network the frequency range between 8 GHz and 13.5 GHz is demonstrated,
Analyzers whereby the concept and setup are not limited to this frequency
range. Furthermore, outperforming time-resolution and state of
Debapratim Ghosh, Girish Kumar; IIT Bombay, India the art low-noise behavior are demonstrated.
EuMC20-1, Time: 11:20
This paper describes the design of a microstrip four port testset for
use in narrow band network analyzers. The testset configuration
18
EuMC 2016 4–6 October 2016 London, UK
Determination of Multi-Port Noise Parameters ber of harmonics can be taken into account with minimal added
Luciano Boglione, Joel Goodman; Naval Research computational cost. The results for second harmonic clipping
contours are compared with the analytical solutions available in
Laboratory, USA literature, while for the first time 3rd harmonics clipping contours
EuMC20-5, Time: 12:40 are presented. The latter allow the improvement of the output
The paper outlines the main results of a novel and comprehen- power and the efficiency achievable with the active device, while
sive analysis for the determination of the noise parameters of strong-linearity due to clipping can be consciously avoided in the
linear noisy microwave networks with any number of ports. The design stage.
well-established approach by Lane for the case of linear 2 port
networks becomes a particular case of this analysis. A thorough Packaged AlGaN/GaN HEMT Power Bars with 900W
discussion of the results identifies practical requirements as well Output Power and High PAE at L-Band
as constraints for a successful noise characterization of any N-port
networks. The noise parameters of a passive 4 port network are C. Friesicke, T. Maier, P. Brückner, Rüdiger Quay,
determined to validate the analysis against measurements. This Oliver Ambacher; Fraunhofer IAF, Germany
paper is the first demonstration of a method to determine the EuMC21-5, Time: 12:40
noise parameters of a linear network with any number of ports.
This paper describes the performance of packaged power bars that
are realized in a 0.5 μm gate length AlGaN/GaN HEMT technology
on SiC substrates, assembled together with pre-matching circuitry
EuMC21 : High Power Amplifiers in a ceramic package and designed for operation at 1030MHz
Room 14, 11:20–13:00, Wednesday 5th October 2016 (L-Band). Two different package assemblies are compared: The
Chair: Marc van Heijningen, TNO first one uses a single power bar, and the second one uses four
Co-Chair: Jean Francois Villemazet, Thales Alenia Space parallel power bars. Fundamental passive load-pull at 50V DC
drain supply voltage under pulsed excitation with 10% duty cycle
Over 74% Efficiency, L-Band 200W GaN-HEMT for shows output power levels of 260W and 900W at 3 dB compression
Space Applications with an associated PAE of 62% and 66%, respectively, for the first
and second assembly. The first assembly is further characterized
Ken Osawa 1 , Hiroyuki Yoshikoshi 1 , Atsushi Nitta 1 , using an active harmonic load-pull system, which demonstrates an
Tsuneyuki Tanaka 1 , Eizo Mitani 2 , Tomio Satoh 1 ; increased output power of about 325W at 69% PAE when tuned for
1
Sumitomo Electric Device Innovations, Japan; maximum power, or peak PAE values exceeding 75% at an output
2 power of 260W when tuned for maximum efficiency.
Sumitomo Electric Europe, UK
EuMC21-2, Time: 11:40
This paper describes an L-band partially-matched GaN HEMT for EuMC22 : Advanced Antenna Technologies
space applications. A 200W GaN HEMT incorporated two 100W and Concepts
dies achieved 71% power-added efficiency, 74.6% drain efficiency
Room 15, 11:20–13:00, Wednesday 5th October 2016
at 1.58GHz under CW operating conditions. We have also com-
pleted space qualification test for this GaN HEMT technology and Chair: Danielle Vanhoenacker-Janvier, Université Catholique de
Louvain
it showed excellent reliability under high temperature and RF Co-Chair: Giandomenico Amendola, University of Calabria
overdrive conditions. The result of this qualification satisfied all
the reliability and lifetime requirements for space applications. To
the best of our knowledge, the efficiency of 74.6% is the highest of Terahertz Microstrip Elevated Stack Antenna
L-Band 200W class GaN HEMT. We also showed the feasibility of Technology on GaN-on-Low Resistivity Silicon
GaN HEMT SSPA for space applications. Substrates for TMIC
Response Time of VSWR Protection for GaN HEMT B. Benakaprasad 1 , A. Eblabla 1 , X. Li 1 , K. Elgaid 1 , D.J.
Based Power Amplifiers Wallis 2 , I. Guiney 2 , C. Humphreys 2 ; 1 University of
Glasgow, UK; 2 University of Cambridge, UK
Sebastian Preis 1 , Jérôme Ferretti 1 , Nikolai Wolff 1 , Alex EuMC22-1, Time: 11:20
Wiens 2 , Rolf Jakoby 2 , Wolfgang Heinrich 1 , Olof
In this paper we demonstrate a THz microstrip stack antenna
Bengtsson 1 ; 1 FBH, Germany; 2 Technische Universität on GaN-on-low resistivity silicon substrates (ρ < 40 Ω.cm). To
Darmstadt, Germany reduce losses caused by the substrate and to enhance performance
EuMC21-3, Time: 12:00 of the integrated antenna at THz frequencies, the driven patch
is shielded by silicon nitride and gold in addition to a layer of
Protection against high voltage-standing-wave-ratios (VSWR) is of
benzocyclobutene (BCB). A second circular patch is elevated in air
great importance in many power amplifier applications. Despite
using gold posts, making this design a stack configuration. The
excellent thermal and voltage breakdown properties even gallium
demonstrated antenna shows a measured resonance frequency
nitride devices may need such measures. This work focuses on
in agreement with the modeling at 0.27 THz and a measured S11
the timing aspect when using barium-strontium-titanate (BST)
as low as -18 dB was obtained. A directivity, gain and radiation
varactors to limit power dissipation and gate current. A power
efficiency of 8.3 dB, 3.4 dB, and 32% respectively was exhibited
amplifier was designed and fabricated, implementing a varactor
from the 3D EM model. To the authors’ knowledge, this is the first
and a GaN-based voltage switch as varactor modulator for VSWR
demonstrated THz integrated microstrip stack antenna for TMIC
protection. The response time until the protection is effective was
(THz Monolithic Integrated Circuits) technology; the developed
measured by switching the voltages at varactor, gate and drain of
technology is suitable for high performance III-V material on low
the transistor, respectively. It was found that it takes a minimum
resistivity/high dielectric substrates.
of 50 μs for the power amplifier to reach a safe condition. Pure
gate pinch-off or drain voltage reduction solutions were slower
and bias-network dependent. For a thick-film BST MIM varactor, SIW Based Modified Slotted Array Antenna with
optimized for speed and power, a switching time of 160 ns was Circular Polarization for X, Ku and K Band
achieved. Communications
Harmonic Clipping Contours: Numerical Chandu D.S., Soumyakanta Pradhan, S.S. Karthikeyan;
Computation and Extension to Higher Harmonics IIITDM Kancheepuram, India
EuMC22-2, Time: 11:40
Roberto Quaglia, S.C. Cripps; Cardiff University, UK
This paper presents a novel approach to the design of substrate
EuMC21-4, Time: 12:20
integrated waveguide (SIW) based slotted array antennas. It is
This paper presents the computation of harmonic clipping con- proposed that wideband characteristics can be achieved when SIW
tours using a Matlab script that guarantees a fast calculation. is fed by a combination of longitudinal and transverse slots. 45◦ in-
Thanks to the numerical nature of the solution, an arbitrary num- clination of the transverse slots excites the orthogonal components
19
EuMC 2016 4–6 October 2016 London, UK
20
EuMC 2016 4–6 October 2016 London, UK
Switchable Filtennas with Sharp Dual Bandnotch Design of Fourth Order Dual-Mode Microstrip Filter
Using Looped Resonators by Using Interdigital Capacitive Loading Element
Waqas Ahmad, Djuradj Budimir; University of with High Selectivity
Westminster, UK Ceyhun Karpuz, Pınar Öztürk Özdemir, Gülfem Balasu
EuMC23-4, Time: 12:20 Fırat; Pamukkale University, Turkey
This paper proposes a reconfigurable/switchable UWB filtenna EuMC24-4, Time: 15:20
with sharp dual bandnotch at WiMAX 3.5 GHz and WLAN 5.8 GHz In this letter, a novel fourth order filter using dual mode open
bands. The filtenna is formed by placing three looped resonators loop resonators is proposed. Dual mode open loop resonators
in an UWB antenna. The resonators are fitted with Graphene based are performed by using capacitive loading element. The main
switches and PIN diodes which introduce reconfigurability. The advantage of this loading element is that it controls the passband
filtenna was simulated and measured in switch OFF and ON states. frequency and bandwidth, sensitively. Also, use of the dual mode
Results show a measured passband from 2.8–11.97 GHz in OFF open loop resonator provides a compact and narrowband bandpass
state and ON state results in sharp dual bandnotch within the filter. In order to demonstrate the validity the filter is designed,
passband at 3.49 GHz and 6.15 GHz at a return loss of 2.2–2.5 dB. simulated and fabricated. Measured result shows good agreement
The gain and efficiency in both states has also been given and is with simulated frequency response.
reduced in ON state at the dual bandnotch. Surface currents at the
dual bandnotch and the radiation patterns in E- and H-planes have Compact Multi-Section Resonator and Bandpass
also been presented.
Filter Application
Loïc Thépaut 1 , Benjamin Potelon 1 , Cédric Quendo 1 ,
EuMC24 : Advances in Planar Filter Design Rémi Ségalen 2 , Françoise Mahé 2 ; 1 Lab-STICC, France;
Room 4, 14:20–16:00, Wednesday 5th October 2016 2
Thales Systèmes Aéroportés, France
Chair: Jason Hong, Heriot Watt University EuMC24-5, Time: 15:40
Co-Chair: Alaa Abunjaileh, Airbus Defence and Space
In this paper, a resonator based on a Multi-Section line is proposed.
The main asset of this novel resonator relies in the reduction of its
Novel Dual Open-Loop Ring Resonator for Compact
length compared to UIR or SIR. To illustrate this advantage, this
Planar Filters resonator has been implemented in an interdigital 5-poles band-
Roman Tkadlec 1 , Giuseppe Macchiarella 2 ; pass filter with a central frequency @ 1.15 GHz. This filter have
1 been designed, simulated and realized. The measurements show a
CommScope, Italy; 2 Politecnico di Milano, Italy
good agreement with simulation. Performances and compactness
EuMC24-1, Time: 14:20 of the resulting filter are then compared to two filters: an UIR
A novel suspended stripline dual open-loop ring resonator is pro- interdigital filter and a SIR interdigital filter. The filter based on
posed for the realization of compact bandpass filters. Resonator the novel Multi-Section Resonator appears to be 33.7% smaller than
size below lambda/16 (where lambda is a wavelength in free space) the UIR interdigital filter.
and reasonably high unloaded Q factor can be achieved. First,
resonator has been characterized through accurate 3D electro-
magnetic simulations and suitable guidelines for dimensioning EuMC25 : Advances in Antenna and
have been derived. Then, based on the new resonator, two 3-pole Radiation Electromagnetic Modelling
bandpass filters have been designed and verified by full-wave 3D
analysis. Finally, both filters were fabricated and measured. The Room 13, 14:20–16:00, Wednesday 5th October 2016
measured results are in good agreement with the simulated one. Chair: Maurizio Bozzi, University of Pavia
Co-Chair: Oksana Shramkova, University of Crete
Design of Compact Triple-Passband Bandpass Filter
TEM Transmission Line Radiation Losses Analysis
Li-Yi Jian 1 , Yung-Wei Chen 2 , Zih-Jyun Dai 1 , Hung-Wei
Wu 1 , Kuan-Yu Chen 1 , Shiue-Chen Chiou 1 , Yan-Kuin Reuven Ianconescu 1 , Vladimir Vulfin 2 ; 1 Shenkar,
Su 2 ; 1 Kun Shan University, Taiwan; 2 Cheng Kung Israel; 2 Ben-Gurion University, Israel
EuMC25-1, Time: 14:20
University, Taiwan
EuMC24-2, Time: 14:40 There are three kind of losses in transmission lines: ohmic, dielec-
tric and radiation losses. While the first two are local phenomena
The compact triple-passband bandpass filter base on uniform which are easy to model, the radiation losses lack a simple model.
impedance ring resonators (UIRRs) is proposed. The filter has This is because the radiation is a global process, determined by
advantages of high passband selectivity, having closed adjacent the constructive interference in the far field of the individual
passbands and compact circuit size. The resonators with magnet- contributions, rather than the local behavior of the current. The
ically coupling by grounding via hole are designed to have tree aim of the current work is to analyze the radiation process from
resonant paths at 1.22 GHz, 1.5 GHz and 1.8 GHz. The resonant transmission lines, aiming to find some possible radiation model.
frequencies can be easily controlled by tuning L3, L4 and L5
for each resonant paths of the resonator. The triple-passband
Higher Order Finite Element Method Solver for the
bandpass filter is showing a simple configuration, an effective
design method and a small circuit size. The measured results are Analysis of Microwave Devices in Planar
in good agreement with the simulation results. Technology
D. Garcia-Doñoro 1 , S. Ting 1 , A. Amor-Martin 2 , L.E.
Pseudo-Elliptic Bandpass Filter with Stepped
Garcia-Castillo 2 , M. Salazar-Palma 2 ; 1 University of
Impedance Stubs
Macau, China; 2 Universidad Carlos III de Madrid, Spain
J.A.G. Malherbe, Tebogo Bopape; University of Pretoria, EuMC25-2, Time: 14:40
South Africa An electromagnetic in-house parallel solver for the analysis of
EuMC24-3, Time: 15:00 microwave devices is presented in this paper. The solver makes
In this paper a new pseudo-elliptic structure that has an insertion use of a weak formulation based on double curl vector wave equa-
loss performance comparable to Cauer filters, is described. The fil- tion discretized with a rigorous implementation of higher-order
ter differs from previous structures in that it has two three-section isoparametric curl-conforming finite elements of Nédélec first fam-
stepped stubs which contribute an additional transmission zero, ily in tetrahedral and triangular prismatic shapes. A non-standard
ensuring even better performance and substantially increased iterative domain decomposition paradigm is used providing an
range of realizable stopband attenuation levels. The filters find arbitrarily exact radiation boundary condition for the analysis of
application as planar structures where conventional Cauer filters radiation problems. This methodology retains the original sparse
would not be realizable. structure of the FEM matrices while minimizing the size of the
21
EuMC 2016 4–6 October 2016 London, UK
computational domain. A numerical example is presented showing A Fundamental 229–240GHz VCO with Integrated
the reliability and performance of the solver for microwave devices Dynamic Frequency Divider Chain
analysis.
Jidan Al-Eryani 1 , Herbert Knapp 2 , Jonas Wursthorn 1 ,
New Planar Microwave Devices and Antennas by Klaus Aufinger 2 , Hao Li 2 , Soran Majied 2 , Sabine
Practical Surface-Wave Launching Boguth 2 , Rudolf Lachner 2 , Josef Böck 2 , Linus
Maurer 1 ; 1 Universität der Bundeswehr München,
Symon K. Podilchak 1 , Samir F. Mahmoud 2 , Alois P.
Germany; 2 Infineon Technologies, Germany
Freundorfer 3 , Yahia M.M. Antar 3 ; 1 Heriot-Watt
EuMC26-2, Time: 14:40
University, UK; 2 Cairo University, Egypt; 3 RMCC,
A fundamental 229–240GHz voltage-controlled oscillator (VCO)
Canada driving directly a divide-by-8 dynamic frequency divider chain is
EuMC25-3, Time: 15:00 presented. To our best knowledge, this is the highest reported
Classic feeding techniques and dielectric slab selection for planar fundamental VCO integrated with a frequency divider in silicon.
circuit and antenna designs can be challenging at microwave and Furthermore, the high-frequency divider operational range up to
millimeter-wave frequencies. Substrates can become electrically 240 GHz is a record value for dynamic dividers in silicon. The
thick and unwanted surface-wave (SW) field distributions may down-converted signal (<30 GHz) at the output of the divider chain
be excited potentially spoiling device performance. Thus SWs has a measured constant single-ended power of ∼-11.5dBm within
are typically looked upon as an adverse effect causing parasitic the VCO operation range. The presented circuit makes possible the
radiation and power losses. In this work a full-wave analysis is addition of further low-frequency dividers and a phase-locked loop
provided in the spectral domain by examining the fields generated (PLL) needed for the stabilization of a VCO. The circuit is fabricated
by the main slot connected to the feeding transmission line. in a 130nm SiGe BiCMOS technology with fT /fmax = 250/370 GHz.
Numerical results by the authors suggest that there is a broad
frequency range which can offer increased TM SW power levels Design and Characterization of a 190-GHz
when compared to the radiated space wave power. Applications Voltage-Controlled Oscillator
for these printed surface-wave launchers, as described in this
review article include, new quasi-optical planar circuits, leaky-wave David Fritsche, Songhui Li, Niko Joram, Corrado Carta,
antennas, and other guiding structures for power combining at Frank Ellinger; Technische Universität Dresden,
microwave and millimeter-wave frequencies. Germany
EuMC26-3, Time: 15:00
Near-Field Correlation Measurement and Evaluation
This paper presents a fundamental-mode voltage-controlled oscil-
of Stationary and Cyclostationary Stochastic lator (VCO) for frequencies around 190 GHz fabricated in a 0.13-μm
Electromagnetic Fields SiGe BiCMOS technology. The VCO is optimized for a mW-level
Johannes A. Russer 1 , Michael Haider 1 , Mohd H. output power, which is typically required for the local oscillator
signal in sub-THz wireless communication systems, and for lowest
Baharuddin 2 , Christopher Smartt 2 , Sidina Wane 3 , DC power consumption. The conventional measurement technique
Damienne Bajon 4 , Andrey Baev 5 , Yury Kuznetsov 5 , for VCOs in this frequency range is improved by employing the
D.W.P. Thomas 2 , Peter Russer 1 ; 1 Technische required external subharmonic mixer within an offset phase-locked
Universität München, Germany; 2 University of loop. Measurements of the fabricated VCO show a frequency
tuning range from 184.5 GHz to 196.7 GHz and a phase noise of
Nottingham, UK; 3 NXP Semiconductors, France; 4 ISAE, -91 dBc/Hz at 10 MHz offset from the oscillation frequency at
France; 5 Moscow Aviation Institute, Russia 196.7 GHz. The maximum output power is -0.8 dBm at a DC power
EuMC25-4, Time: 15:20 consumption of 18.2 mW. To the authors’ best knowledge, the
resulting power efficiency of 5.1% is the highest reported for VCOs
We present methods for measurement and evaluation of stationary
operating at these frequencies.
and cyclostationary stochastic electromagnetic fields. The radi-
ated electromagnetic interference (EMI) of electronic circuitry is
recorded by two-point measurements of the tangential electric or A 100GHz Fundamental Oscillator with 25%
magnetic field components and by evaluating the field autocor- Efficiency Based on Transferred-Substrate InP-DHBT
relation functions and for each pair of field sampling points also Technology
the cross correlation functions. In case of digital circuitry clocked
by a single clock pulse, the generated EMI is a cyclostationary Maruf Hossain, Nils Weimann, Viktor Krozer, Wolfgang
process where the expectation values of the EMI are periodically Heinrich; FBH, Germany
time dependent according to the clock frequency and which have EuMC26-4, Time: 15:20
to be considered in modeling the EMI.
A 96-GHz fixed-frequency fundamental oscillator with high effi-
ciency is presented, realized using a transferred-substrate (TS) 0.8
μm InP-DHBT process. It delivers 9 dBm output power, with phase
EuMC26 : High Frequency Oscillators noise values of -90 dBc/Hz and -118 dBc/Hz at 1 MHz and 10 MHz
Room 14, 14:20–16:00, Wednesday 5th October 2016 offset frequency, respectively. DC consumption is only 30 mW
Chair: Cicero Vaucher, NXP from a 1.6 volts power supply, which corresponds to the highest
Co-Chair: Herbert Zirath, Chalmers University of Technology overall DC-to-RF efficiency of a millimeter-wave frequency source
reported to date.
A 315GHz Reflection-Type Push-Push Oscillator in
InP-DHBT Technology A Very Low Phase-Noise Ku-Band Resistively
Coupled VCO Array in 0.25μm SiGe:C BiCMOS
Maruf Hossain, Nils Weimann, Viktor Krozer, Wolfgang
Heinrich; FBH, Germany Jérémy Hyvert 1 , David Cordeau 1 , Jean-Marie Paillot 1 ,
EuMC26-1, Time: 14:20 Pascal Philippe 2 ; 1 XLIM, France; 2 NXP Semiconductors,
A 315-GHz reflection-type push-push oscillator is presented. It France
is realized using a 0.8 μm-emitter transferred-substrate (TS) InP- EuMC26-5, Time: 15:40
DHBT technology with an fmax of 320 GHz. The oscillator delivers This paper presents a very low phase noise, Ku-band, differential
-10 dBm output power. DC consumption is only 21 mW from a 1.6 coupled Voltage Controlled Oscillator (VCO) array implemented
volts power supply, which corresponds to 0.5% overall DC-to-RF in the QUBIC4X 0.25 μm SiGe:C BiCMOS process of NXP semicon-
efficiency. ductors. The proposed circuit consists in two class-C type VCOs
coupled through a resistive network. In these conditions, the phase
shift is obtained by detuning the free-running frequencies of the
two VCOs of the array. At 5 V supply voltage and a maximum
22
EuMC 2016 4–6 October 2016 London, UK
power dissipation of 233 mW, the VCO array features a worst case A Multi-Channel Outphasing Ring Combiner for
phase noise of -99 dBc/Hz at 100 kHz frequency offset from a 13.5 Multi-Mode Output and Channel Aggregation
GHz carrier. The VCO array can be tuned from 13.5 GHz to 14.75
GHz with a tuning voltage varying from 1 V to 4.5 V. Furthermore,
Kyle D. Holzer, Jeffrey S. Walling; University of Utah,
thanks to the differential operation of the array, a continuously USA
controlled phase shifting range from -80◦ to +78◦ and from +100◦ EuMC27-4, Time: 15:20
to +258◦ is obtained. In this paper, a rat-race coupler is used to enable mode-switching
and channel aggregating communications. A novel 6-port modifica-
tion to the rat-race coupler that allows simultaneous transmission
EuMC27 : Systems and Applications 2 of three channels with no TX/RX switch is presented. High power
Room 15, 14:20–16:00, Wednesday 5th October 2016 GaN power amplifiers are used to drive the combiner input ports
Chair: Richard Ranson, Radio System Design and their phases are adjusted to drive separate channels to differ-
Co-Chair: Andrea Suriani, Thales Alenia Space ent outputs. This outphasing operation can produce one or more
modulated waveforms at a single or multiple antenna ports, with
Downlink Output Power Requirements with an the use of relative phase relationships between the different chan-
nels. The controllable channel and antenna selection is enabled via
Experimental-Based Indoor LOS/NLOS MIMO software control of the phasing relationships between the signals
Channel Models at 10GHz to Provide 10Gbit/s and enables the elimination of a traditional high power transfer
switch, thereby increasing transmitter efficiency and reducing
Tommi Tuovinen, Nuutti Tervo, Aarno Pärssinen;
overall system implementation size. To validate the performance,
University of Oulu, Finland two LTE signals were input to the combiner with center frequencies
EuMC27-1, Time: 14:20 of 5.3 GHz and 5.4 GHz, respectively. The combiner shows >30 dB
The present paper studies link output power requirements per of rejection for the undesired signal at each port. The measured
connection in order to provide 10 Gbit/s or more with included ACLR in both channels was < -30 dBc, while outputting and average
MIMO beam-specific path gains for spatially multiplexed data output power and PAE of 27.6 dBm and 28%, respectively.
streams. Time-duplexing orthogonal frequency-division multiplex-
ing 5G system is examined. System performance is considered in Microwave Nondestructive Evaluation of Thermal
line-of-sight (LOS) and non-LOS channels. This work utilizes RF Barrier Coated Turbine Blades Using Correlation
modelling method where digital signal processing is abstracted
Analysis
to minimum SNR requirement definitions and RF system SNR
described based on transmitter and receiver performance related Muhammad Firdaus A.J.K. 1 , Robin Sloan 1 ,
to output and input power levels. As the output of this work Christopher I. Duff 1 , Marcin Wielgat 2 , James F.
represents indoor link RF output power requirements, the results
can be utilized in several research directions; e.g., providing
Knowles 3 ; 1 University of Manchester, UK; 2 Alstom,
dynamic range requirements for a power amplifier concept and for Switzerland; 3 JK NDE Consultancy, UK
RF transceiver architecture optimization in terms of complexity EuMC27-5, Time: 15:40
and power consumption. The ability of microwave energy to propagate through a dielectric
material and interact at boundaries makes microwave imaging
E-Band Transmitter with 29dBm RF Power for techniques attractive for inspection of defects under dielectric
Satellite Communication layers. In this paper, microwave non-destructive testing/evaluation
(NDT/E) using Ka-band open ended rectangular waveguide (OERW)
P. Harati 1 , Axel Tessmann 2 , D. Schwantuschke 2 , R. energy launch, in conjunction with broad frequency swept signal
Henneberger 3 , I. Kallfass 1 ; 1 Universität Stuttgart, processing is used to inspect the thermal barrier coated turbine
Germany; 2 Fraunhofer IAF, Germany; 3 Radiometer blades sample. A correlation technique utilizing both the mag-
nitude and phase information of the reflection coefficient at the
Physics, Germany
waveguide aperture is used. Representative turbine blade with
EuMC27-2, Time: 14:40
defects on the metal, visibly hidden by the Thermal Barrier Coating
In this paper an E-band transmitter chain with a maximum RF (TBC) is measured and the technique verified.
output power of 29 dBm for a 1 GBd QPSK signal is presented.
The high output power is achieved by applying AlGaN/GaN-based
power amplifiers as final stage of a module chain which further EuMC28 : Diplexers and Reconfigurable
comprises a GaAs mHEMT-based quadrature up-converter, LO
frequency multiplier-by-eight and driver amplifiers. The output
Filters
power remains higher than 27 dBm for up to 6 GBd symbol rate Room 4, 16:40–18:20, Wednesday 5th October 2016
and a modulation complexity of up to 32 QAM. In this work Chair: Serge Verdeyme, University of Limoges
the effect of different PSK and QAM modulation format as well Co-Chair: Giuseppe Macchiarella, Politecnico di Milano
as the baud rate on the transmitted RF power level is studied
through measurements. The linearity of the dual GaN PA module Novel RF Interference Rejection Technique Using a
is evaluated for different types of modulation formats. Four-Port Diplexer
Microwave Near-Field Sensor for the Contactless Jessada Konpang, Muhammad Sandhu, Nutapong
Detection of Material Fluctuations Somjit, Ian C. Hunter; University of Leeds, UK
EuMC28-1, Time: 16:40
Birk Hattenhorst, Christoph Baer, Thomas Musch,
A novel RF interference rejection technique using four-port net-
Christian Schulz, Ilona Rolfes; Ruhr-Universität work is presented in this paper by using two diplexers combined
Bochum, Germany together. This technique offers the signal isolation of 68.46 dB
EuMC27-3, Time: 15:00 between transmitter and receiver module, which is the best figure
In this contribution a sensor concept for the contactless detec- ever reported. The four-port network exploits both high and low-Q
tion of either dielectric or magnetic material fluctuations in its factor filters for the cost reduction. The design tolerance with
near-field is presented. The microwave sensor consists of two phase deviation between 180◦ and 183◦ of four-port network was
microstrip patch antennas connected to a reflectometer composed investigated and the novel concept still has signal isolation (S32 )
of a radio frequency (RF) measurement and a low frequency (LF) of better than 65.47 dB, which is still superior compared to the
processing part. Due to the explicit, contactless detection of existing diplexer. Finally, RF interference rejection technique can
material variations, based on the detuning of antennas, the sensor be used in wireless communication systems whereas small size,
is a versatile measurement instrument for the use in a wide field of low losses and low complexity are required.
applications. Measurements of single and compound components
reveal the fully functional usage of the sensor.
23
EuMC 2016 4–6 October 2016 London, UK
A 2∼18GHz Compact Microwave Band-Pass Filter compensation circuits is introduced to prove the general solu-
Suitable for Planar and Three-Dimension Flexible tion. The EM analyses results for the different settings, including
Integration contiguous/non-contiguous channels with variable center frequen-
cies and bandwidths demonstrate the feasibility of reconfigurable
Yu Lan, Yuehang Xu, Tengda Mei, Yunqiu Wu, Ruimin OMUX implementations with state-of-the-art technologies.
Xu; UESTC, China
EuMC28-2, Time: 17:00 In-Orbit Reconfigurable Waveguide Filter
In this paper, a ultra wide-band microwave band pass filter suitable Christian Arnold 1 , Jean Parlebas 1 , Thomas Zwick 2 ,
for planar and three-dimension integration is presented. Taking Martin Schneider 3 ; 1 Tesat-Spacecom, Germany; 2 KIT,
the advantage of mechanical flexibility, ultra thin Liquid Crystal
Polymer (LCP) with 50 μm thickness is used as the substrate. Germany; 3 Universität Bremen, Germany
Firstly, to estimate the bending effects of microwave devices based EuMC28-5, Time: 18:00
on LCP substrate, a set of 50 Ohm microstrip lines is fabricated In this paper, the actuation and tuning strategy for in-orbit tunable
and tested. And the performances of microstrip lines at the range waveguide filters based on coupling cavities is presented. The
of bending radius from 1.5 mm to 0.75 mm are demonstrated. The novel coupling cavities allow frequency and bandwidth tuning
microstrip lines show little deterioration under the bending radii with non-contacting tuning plungers. The filter that has been
of 1.5mm and 1mm, but when the radius was reduced to 0.75 mm, equipped with the novel actuation system is a four-pole elliptic
the insertion loss sharply increased to 30 dB, showing the complete filter, which operates at Ka-band frequencies and which can be
reflection phenomenon; Then, a 2–18GHz ultra wide-band filter tuned to bandwidths from 36 to 72 MHz in the frequency range
are designed and tested with overall LCP dimensions of 7.52 × 19.7–20.2 GHz. A trade-off between different actuation approaches
6.31mm2 . The planar measurement result show that the maximum is presented as well as a summary of the in-orbit tuning strategy
insertion loss is 2.6dB at 18GHz and maximum return loss is that has been chosen based on the actuation approach. A test-bed
11.2dB at 6.7GHz, respectively; Finally, the performance of the comprising hard- and software required for tuning the filter has
proposed filter is measured at twisted circumstance with the maxi- been implemented and is briefly presented.
mum insertion loss is 2.8dB at 18GHz and maximum return loss is
12.1dB at 6.6GHz, respectively. And the comparison results show
a very low susceptibility due to twisted behavior. These results EuMC29 : Measurement Systems
show that the ultra thin LCP substrate is a promising candidate Room 13, 16:40–18:20, Wednesday 5th October 2016
for future planar and 3D integration applications in wearable and
Chair: Denis Barataud, XLIM
portable devices.
Co-Chair: Tuami Lasri, IEMN
Reconfigurable Doublet Dual-Mode Cavity Filter
Spatial Resolution Enhancement of Near Field
Designs Providing Remote Controlled Center
Microwave Microscope
Frequency and Bandwidth Re-Allocation
Sijia Gu, Tianjun Lin, Tuami Lasri; IEMN, France
Uwe Rosenberg 1 , Ralf Beyer 1 , Peter Krauß 1 , Thomas
EuMC29-1, Time: 16:40
Sieverding 1 , Andreas Papanastasiou 2 , Marcos
A near-field scanning microwave microscope based on an interfer-
Pueyo-Tolosa 2 , Petronilo Martin Iglesias 3 , Christoph ometric technique is proposed in this work. To ensure an optimal
Ernst 3 ; 1 Mician Global Engineering, Germany; 2 COM spatial resolution, crucial parameters of the evanescent microwave
DEV International, UK; 3 ESA, The Netherlands probe are finely studied including the tip apex, the stand-off
EuMC28-3, Time: 17:20 distance and the scanning step size.
24
EuMC 2016 4–6 October 2016 London, UK
which are important for antenna measurements), but rather for small-signal gain of typically 11.2 dB and a flatness of ±1 dB within
their return loss, insertion loss, and mechanical stability. This the frequency range of interest.
resulted in metal probes that are relatively large compared to the
wavelength. In this paper, two probes are compared with regard to 60% PAE, 30W X-Band and 33% PAE, 100W Ku-Band
their performance in integrated antenna measurements. The first PAs Utilizing 0.15μm GaN HEMT Technology
probe is a standard commercially available probe. The second one
is a modified probe with an extended coaxial probe tip to increase Takuma Torii, Shohei Imai, Hiroaki Maehara, Miyo
the distance between probe and antenna, which decreases the Miyashita, Tetsuo Kunii, Takuo Morimoto, Akira Inoue,
distortion and reflection caused by the probe significantly. Akira Ohta, Hideaki Katayama, Norihiro Yunoue, Koji
Yamanaka, Hiroshi Fukumoto; Mitsubishi Electric,
Match Correction and Linearity Effects on
Japan
Wide-Bandwidth Modulated AM-AM and AM-PM EuMC30-2, Time: 17:00
Measurements
Two kinds of high efficiency power amplifiers (PAs) at X and Ku
J. Martens; Anritsu, USA bands utilizing 0.15 μm GaN HEMT technology are presented.
EuMC29-4, Time: 17:40 The 0.15 μm GaN HEMT technology with cutoff frequency of over
40 GHz enables them to realize high RF performances at higher
Wider-bandwidth and higher carrier frequency distortion mea-
frequency. To provide better efficiency of the PAs, the second
surements are of increasing importance and some of the uncer-
harmonic reflection circuits are employed at both input and output
tainty issues and correction effects can be enhanced relative to
of GaN HEMT chips. The measured results show the X-band
lower/narrower frequency tests. For assurance and complete-
GaN HEMT PA achieved power added efficiency (PAE) of 58.6%
ness reasons, the desire to perform these tests while modulated
and output power (P out ) of 30W, and the Ku-band GaN HEMT PA
has increased as well. Classical AM/AM and AM/PM modulated
obtained PAE of 33% and P out of 100W under CW operation. To
measurements can introduce errors exceeding 1 dB/5 deg with
the best of our knowledge, the both PAE of the X-band PA and P out
common device/instrument parameters by ignoring match effects
under CW operation of the Ku-band PA are state-of-the-art.
on the basic measurement and that is before power delivery ques-
tions are asked. Instrument linearity, although less correctable, A 83-W, 51% GaN HEMT Doherty Power Amplifier
can also play a more significant role, particularly in mm-wave
bands. By correcting where possible and using a sufficiently robust
for 3.5-GHz-Band LTE Base Stations
measuring receiver, relative uncertainties on the scale of tenths Katsuya Kato, Shinichi Miwa, Eri Teranishi, Naoki
of a dB/few degrees to mm-wave frequencies seems possible with Kosaka, Kazunobu Fujii, Shigeo Yamabe, Tomoyuki
absolute parameter uncertainties being more driven by absolute
power accuracy. Asada, Kenichi Horiguchi, Yoshinobu Sasaki, Akira
Inoue, Hideaki Katayama; Mitsubishi Electric, Japan
Antenna Measurement System Using Bi-Directional EuMC30-3, Time: 17:20
Optical Fiber Link System This paper presents a high-power, high-efficiency GaN HEMT
Doherty power amplifier (DPA) for 3.5-GHz-band LTE macro-cell
Satoru Kurokawa 1 , Masanobu Hirose 1 , Yoshikazu
base-stations. To enhance the efficiency of the DPA, a new input
Toba 2 , Jun Ichijo 2 ; 1 AIST, Japan; 2 Seikoh Giken, Japan matching circuit design based on a normalized peak amplifier’s
EuMC29-5, Time: 18:00 power ratio is proposed. A symmetrical DPA with the circuit is
We propose an antenna measurement system using the bi- designed using 64.6% drain efficiency, 200W GaN HEMTs. The
directional type optical fiber link transceivers with the directional design shows significant improvement of both backed-off and peak
couplers. Our proposed system can measure the reflection signal efficiency of the DPA. At 3.51-GHz, high drain efficiency of 51.7%
and transmitting signal of the antenna after full-2-port calibration and 49.2 dBm (83 W) output power are achieved with a power gain
of vector network analyzer. In this paper, we show the frequency of 13.5 dB and ACLR of -50.6 dBc using a LTE single carrier and
response of bi-directional type optical fiber link transceiver. Dy- digital predistortion system. This is the first demonstration of
namic range of our proposed system is more than 50 dB in the a GaN HEMT DPA of over 80W for 3.5-GHz-Band LTE macro-cell
frequency range from 10 MHz to 1000 MHz. Further, we show base-stations.
the antenna reflection coefficient and transmitting measurement Two-Stage Harmonically Tuned 50W GaN-HEMT
results using our proposed system.
Wideband Power Amplifier
Chi Thanh Nghe 1 , Gernot Zimmer 2 , Georg Boeck 1 ;
EuMC30 : High Frequency and Wideband 1
Technische Universität Berlin, Germany; 2 FBH,
Amplifiers Germany
Room 14, 16:40–18:20, Wednesday 5th October 2016 EuMC30-4, Time: 17:40
Chair: Matthias Rudolph, Brandenburg University of Technology
In conjunction with suited terminations of harmonic load
Co-Chair: Shokrollah Karimian, CERN
impedances, this paper contributes a systematic analysis and
design for a high power, high efficiency and broadband GaN-HEMT
GaN-Based E-Band Power Amplifier Modules power amplifier (PA). In terms of improving the previous design
D. Schwantuschke 1 , R. Henneberger 2 , S. Wagner 1 , in [1], this study is illustrated and characterized throughout
a practical design of the two-stage PA under consideration of
Axel Tessmann 1 , I. Kallfass 3 , P. Brückner 1 , Rüdiger harmonic load terminations. During the design process, matching
Quay 1 , Oliver Ambacher 1 ; 1 Fraunhofer IAF, Germany; networks (MNs) at input, output and between the two stages are
2
Radiometer Physics, Germany; 3 Universität Stuttgart, maintained. The experimental results of large-signal continuous
Germany wave (CW) indicate a performance of 47–48.5dBm output power
with corresponded power gain level of 28.3 dB from 2.0 to 2.8
EuMC30-1, Time: 16:40
GHz. The Power-Added-Efficiency (PAE) of the PA is attained from
This work discusses the fabrication of two GaN-based power 50–65%.
amplifier modules, suitable to increase the available output power
levels of E-band multi-Gigabit fixed wireless links dedicated to Multi-Octave GaN High Power Amplifier Using
aeronautics and space applications. The first mounted module Planar Transmission Line Transformer
contains one GaN-based power amplifier MMIC, packaged in a
WR-10 waveguide environment. The module shows a small-signal
Mhd. Tareq Arnous, Zihui Zhang, Felix Rautschke,
gain of 13.4 dB with a gain flatness of ±1 dB, along with a sat- Georg Boeck; Technische Universität Berlin, Germany
urated output power of more than 26 dBm (400 mW) for the EuMC30-5, Time: 18:00
entire intended frequency range between 71–76 GHz. The second In this work, design, implementation and experimental results
module, parallelizing four MMICs, demonstrates a high saturated of an efficient, high power and multi-octave GaN-HEMT power
output power of more than 31.1 dBm (1290 mW), along with a
25
EuMC 2016 4–6 October 2016 London, UK
amplifier (PA) are presented. To overcome the low optimum source of RCS is realized in the frequency range from 9.5 GHz to 11.3 GHz
and load impedances of a large transistor, various topologies under normal incidence of electromagnetic wave.
of a broadside coupled impedance transformer are simulated,
implemented and measured. The used transformer achieves a New 3D Printed Microwave Metamaterial Absorbers
flat measured insertion loss (IL) of 0.5 dB and a return loss (RL) with Conductive Printing Materials
higher than 10 dB over a decade bandwidth [0.4 – 4] GHz. The
transformer is integrated at the drain and gate side of the transistor Rainer Kronberger, Patrick Soboll; TH Köln, Germany
using pre-matching networks to transform the complex optimum EuMC31-4, Time: 17:40
source/ load impedances to the appropriate impedances of the
In this paper a FSS is presented, which is fully fabricated by means
transformer plane. The measurement results illustrate a saturated
of a 3D printer. Commercial printing filaments, usually applied for
output power ranged between 49.6 ± 1 dBm with an average drain
3D printing of metal like structures were investigated and used. A
efficiency of 57% and gain of 10.5 dB across 0.6 – 2.6 GHz.
flat periodic FSS absorber structure was developed and optimized
for 10 GHz, fabricated with the 3D printer, measured afterwards
and compared with the simulations. Further simulations were
EuMC31 : Metamaterial Absorbers made with the new materials at higher frequencies and the results
Room 15, 16:40–18:20, Wednesday 5th October 2016 confirm that 3D printing technology works well and could be used
Chair: Jan Machac, Czech Technical University in Prague to the best advantage for absorbers and other applications in the
Co-Chair: Francisco Medina, Universidad de Sevilla frequency range below 100 GHz.
Design and Analysis of a Broadband Single Layer Doppler Tomographic Investigations of a Lossy
Circuit Analog Absorber High Impedance Surface Absorber at High Incident
Saptarshi Ghosh 1 , Somak Bhattacharyya 2 , Angles
Kumar Vaibhav Srivastava 1 ; 1 IIT Kanpur, India; 2 IIIT Thomas C. Baum 1 , Kamran Ghorbani 1 , Kelvin J.
Allahabad, India Nicholson 2 ; 1 RMIT University, Australia; 2 DST Group,
EuMC31-1, Time: 16:40 Australia
In this paper, a broadband polarization-insensitive single layer EuMC31-5, Time: 18:00
circuit analog absorber has been presented. The proposed absorber High impedance surfaces (HIS) have attracted a significant amount
consists of a periodic arrangement of square loops loaded with of attention in recent years, as they allow for the manipulation
lumped resistors, which exhibits 10-dB bandwidth from 7.56 GHz of surface currents on ground planes for antennas. These same
to 14.58 GHz under normal incidence, covering X and Ku bands. structures, along with various similar resonant elements have been
The structure has been characterized by deriving its equivalent exploited to design near perfect narrow band absorbers. This class
circuit model, where the circuit simulation shows good matching of absorbers has also been used to develop multi-resonant and
with the full-wave analysis. The effects of the lumped resistors broadband responses using lossy, high dielectric mediums (i.e.
and the dielectric loss have been studied and several parametric graphite, carbon, etc.). This paper investigates a high resolution,
variations are performed to examine the sensitivity of the design coherent Doppler tomographic (CDT) image of a simple lossy
parameters on the absorption bandwidth. Furthermore, the struc- mushroom HIS structure, designed from structural composite
ture has been fabricated and measured in anechoic chamber, where materials. The resonating elements are investigated for their sur-
the experimental results are in good agreement with the simulated face wave scattering properties and are shown to create complex
responses. scattering interactions within the HIS absorber. The HIS structure
resonated at 6.2 GHz with a -10.48 dB reflection coefficient. A
Design of Frequency-Dispersive Magnetic Material wideband analysis indicates that the overall scattering is reduced.
for Application of Microwave Attenuation
Tianwei Deng 1 , Zhi Ning Chen 2 ; 1 TL@NUS, Singapore; EuMC32 : Advances in RFID Systems
2
National University of Singapore, Singapore Room 11, 09:00–10:40, Thursday 6th October 2016
EuMC31-2, Time: 17:00 Chair: Lutfi Albasha, American University of Sharjah
A concern of screen for microwave attenuation is its limited Co-Chair: Józef Modelski, Warsaw University of Technology
bandwidth. Thanks to unique properties of frequency-dispersive
permeability at resonant frequencies, magnetic materials are Multimode Stepped Impedance Resonators and their
applied for microwave attenuation. The operation mechanism and Application in Chipless RFID Tags
limitations of magnetic material screen (MMS) were studied and
analyzed. To further expand bandwidth, a frequency-selective Fuminori Sakai 1 , Mitsuo Makimoto 1 , Koji Wada 2 ;
1
surface (FSS)-based MMS was proposed and designed. Compared Sakura Tech, Japan; 2 University of
with proposed MMS, the FSS-based MMS expands the operation
Electro-Communications, Japan
bandwidth to 217% and decreases the overall thickness of the
screen to 77.7%. EuMC32-1, Time: 09:00
Stepped impedance resonators (SIRs) are composed of multiple
Suppression of Radar Cross Section Based on transmission lines with different characteristic impedances and
Polarization-Independent Metamaterial Absorber can control higher-order mode resonance frequencies. Here, iden-
tification codes from a resonator were systematically generated by
Ahmet Ozer 1 , Kadir Ozden 1 , Fatih Yaman 2 , Hamza utilizing these properties and introducing symmetric multimode
Kurt 3 , Okan Mert Yucedag 4 , Hasan Kocer 1 ; 1 Turkish SIRs composed of transmission lines of uniform length. In the
Military Academy, Turkey; 2 Independent Researcher, other direction, resonator codes were identified by detecting their
higher-order mode resonance frequencies. This paper describes
Turkey; 3 TOBB ETÜ, Turkey; 4 TÜBİTAK, Turkey these resonance properties and experimental results for mul-
EuMC31-3, Time: 17:20 timode SIRs and presents a frequency detection method using
Electromagnetic wave absorbers play an important role in stealth electromagnetic probes. The experimental data show that the
applications as reducing radar cross section (RCS). Metamaterial proposed method is applicable to a chipless RFID tag system.
based absorbers bring a different point of view to the reducing
RCS with simple design, easy fabrication, perfect and broadband
absorption as well as tunable and controllable absorption charac-
teristics over a great range of frequency spectrum from microwave
to optics. In this paper, design, simulation and measurement
of a polarization insensitive-broadband metamaterial absorber
are presented at X-band. The proposed absorber has 2.5 GHz
bandwidth above 90% of absorption level. At least 10 dB reduction
26
EuMC 2016 4–6 October 2016 London, UK
Near-Field Measurement of Connected Smart RFIC of 6.78 MHz to reduce losses. Tag sensitivity for communication
Objects Accounting for Environmental Uncertainties was increased by about 21 dB with the help of inductive wireless
powering when compared to a tag which did not employ this
Sidina Wane 1 , Damienne Bajon 2 , Dominique powering. Communication and powering circuits were integrated
Lesénéchal 1 , Johannes A. Russer 3 , Peter Russer 3 , within compact structures on the sides of the reader and the tag.
D.W.P. Thomas 4 , Gregor Tanner 4 , Gabriele Gradoni 4 , The reader side consists of a center-excised Archimedes spiral
Yury Kuznetsov 5 ; 1 NXP Semiconductors, France; 2 ISAE, antenna for communication and a circular loop for powering. The
tag side consists of a folded dipole antenna for communication
France; 3 Technische Universität München, Germany; and a rectangular loop for powering.
4
University of Nottingham, UK; 5 Moscow Aviation
Institute, Russia
EuMC32-2, Time: 09:20 EuMC33 : Passive Components for High
In this paper, we present Near-Field measurement and analysis Power Applications
of radiated emissions from connected smart RFIC objects. Exper- Room 12, 09:00–10:40, Thursday 6th October 2016
imental results for the characterization of Near-Field couplings Chair: Marco Pasian, University of Pavia
between smartphones in presence of noisy interferers (GPS device Co-Chair: Stephane Bila, University of Limoges
in operation) are discussed. Spectral and spatial responses of
radiated emissions from coupled smartphones are extracted in A Fully-Printed MIM Varactor for High Power
TX (Transmit) and RX (Receive) modes with focus on WLAN, GSM,
UMTS, LTE frequency bands. Designed diversity coupled Vivaldi Application
antenna elements for UWB applications are used for assessing the Daniel Kienemund 1 , Christian Kohler 2 , Thomas Fink 3 ,
sensitivity of Near-Field detection as function of input power levels
Mike Abrecht 3 , Alex Wiens 1 , Walter Bigler 3 ,
ranging from +5dBm to -130dBm. Perspectives for using noise as
carrier are envisaged. Joachim R. Binder 2 , Holger Maune 1 , Rolf Jakoby 1 ;
1
Technische Universität Darmstadt, Germany; 2 KIT,
RF-Powered Multi-Sensing Platform for RFID with Germany; 3 COMET, Switzerland
Frequency Modulation EuMC33-1, Time: 09:00
1 1 1 A fully screen printed metal-insulator-metal (MIM) thick-film varac-
Md. Mazidul Islam , Jinsong Song , Ville Viikari ,
tor is presented, designed for high-power application. The varactor
Joona Nikunen 2 ; 1 Aalto University, Finland; 2 Metso
is based on a 9.9μm thick film layer of the tunable, ferroelectric
Automation, Finland material barium strontium titanate (BST) resulting in a capacitance
EuMC32-3, Time: 09:40 at room temperature of 4.2 nF and a quality factor of 26 at 13.56
We present an approach for making an RFID capable of sensing MHz. A tunability of 37.2% is measured with a biasing voltage
multiple measurands. In this approach, sensor’s information is of 100V decreasing the capacitance to 2.88 nF and increasing
carried in the modulation frequency. Analytical expressions de- the quality factor to 32.3. The power handling capabilities of the
scribing the sensor’s operation are reviewed and, for the first time, varactor are evaluated in a 50 Ω setup in back to back configuration
this kind of sensor capable of measuring two quantities, humidity at 13.56 MHz. The varactor is placed in the shunt branch of an
and illumination, is experimentally demonstrated. Finally, we L-match circuit. At maximum RF input power of 515W the varactor
demonstrate a generic multi-sensing platform by using humidity withstands an RF RMS voltage of 66V and an RMS current of 11A
and light sensors. Results show that humidity and illumination with 37W of dissipated power. At 400W of RF input power the
can be monitored wirelessly across 13m. varactor shows a tunability of 18% with a DC biasing voltage of 128
V.
Electromagnetic Characterization of Soil Moisture
Power Limiting Characteristics of a Plasma-Loaded
and Salinity for UHF RFID Applications in Precision
Evanescent-Mode Cavity Resonator
Agriculture
Abbas Semnani 1 , Hee Jun Yang 2 , Michael Sinanis 1 ,
Shuvashis Dey 1 , Nemai Chandra Karmakar 1 , Rahul
Sung-Jin Park 2 , J. Gary Eden 2 , Sergey O. Macheret 1 ,
Bhattacharyya 2 , Sanjay Sarma 2 ; 1 Monash University,
Dimitrios Peroulis 1 ; 1 Purdue University, USA;
Australia; 2 MIT, USA 2
University of Illinois at Urbana-Champaign, USA
EuMC32-4, Time: 10:00
EuMC33-2, Time: 09:20
This study focuses on the electromagnetic characterization of a
novel low cost UHF RFID sensor for soil moisture and salinity con- Power limiting behavior of a cold plasma jet when introduced in an
tent detection. A theoretical model of soil with different moisture evanescent-mode (EVA) resonator is experimentally investigated in
and salinity levels is simulated along with the designed sensor. A this paper. The plasma jet generates a pre-ionized region over the
fabricated prototype is used to measure the variation of moisture post of the cavity where most of the electric field is concentrated
level and NaCl concentration in sandy soil. Both the simulated on. Due to pre-ionization, microwave breakdown occurs at a lower
and measured results exhibit frequency shift of s-parameter with power level compared with the no-plasma case. During microwave
moisture content variation at non-saline conditions. However, breakdown the high electron density in the cavity causes high RF
if the soil is saline, the return loss amplitude gets reduced with loss and consequently results in a power limiting behavior. The
increased salinity levels without having a significant frequency proposed technique has been examined in a 7.36-GHz EVA cavity
variation due to moisture contents. This allows a further opti- resonator tested with incident power up to 56 W. Arc discharge
mization of the proposed sensor at the desired band and provides occurs beyond 56W causing high reflection levels of the RF signal.
design robustness. A moisture content variation of as small as 35 The proposed plasma-based approach can be employed in the
ml along with a salinity variation of only 4 grams could be detected future as a power limiting technology particularly in challenging
using the designed sensor. applications where conventional techniques cannot be used due to
temperature, power, or linearity constraints.
Semi-Active 866MHz RFID Implantable Tag Fed by
Polynomial Model for High-Order and Multi-Carrier
6.78MHz Inductive Wireless Power Transfer
Passive Intermodulation Products
Jan Kracek, Milan Svanda, Milos Mazanek, Jan Machac;
Dmitry S. Kozlov, Alexey P. Shitvov, Alexander G.
Czech Technical University in Prague, Czech Republic
Schuchinsky; Queen’s University Belfast, UK
EuMC32-5, Time: 10:20
EuMC33-3, Time: 09:40
The paper presents a compact battery-less semi-active UHF RFID
tag powered by an inductive wireless power transfer designed Passive intermodulation (PIM) often limits the performance of
to be implanted into the human body. Communication runs at communication systems, particularly in the presence of multiple
frequency of 866 MHz whereas powering is performed at frequency carriers. Since the origins of the apparently multiple physical
27
EuMC 2016 4–6 October 2016 London, UK
In the last years a great number of substrate-integrated circuits Ku-Band Frequency-Tunable Filter with 11:1
has been developed. These circuits are a compromise between
the advantages of waveguides: high-quality factor and low losses, Bandwidth Tuning
and the advantages of planar circuits: low-cost and easy compact Boyoung Lee 1 , Seunggoo Nam 1 , Tae-Hak Lee 1 , Juseop
integration. Recently, a new methodology for manufacturing empty
Lee 1 , Changsoo Kwak 2 ; 1 Korea University, Korea;
waveguides integrated in a planar substrate has been proposed. 2
To manufacture this Empty Substrate-Integrated Waveguide, a ETRI, Korea
rectangular hole is emptied in the substrate and plated. Finally, the EuMC34-3, Time: 09:40
structure is closed with two metallic covers that are soldered above In this paper, we present a frequency-tunable filter with a 11:1
and below the substrate. Hence, the Empty Substrate-Integrated bandwidth tuning range. To obtain such a wide tuning range, we
Waveguide could be modeled with an ideal rectangular waveguide. propose a new tuning technique that only necessitates control of
However, the degree of error that this assumption implies has not inter-resonator coupling values. In this paper, we describe the the-
been evaluated yet. This evaluation is imperative, since this new ory supporting the proposed tuning technique using a third-order
manufacturing process strongly differs from that of a traditional filter. Verification of the presented bandwidth tuning method
single-piece rectangular waveguide. Then, in this work, for the first has been carried out by designing, fabricating, and measuring a
time, the propagation constant of an Empty Substrate-Integrated third-order Ku-band cavity filter.
Waveguide has been measured, and compared to the propagation
constant of an equivalent ideal rectangular waveguide, in order to Advanced Re-Configurable DEMUX Design Providing
determine how accurately an Empty Substrate-Integrated Waveg-
uide can be modeled with a rectangular waveguide, and if the Flexible Channel Bandwidth Re-Allocations
design methods for rectangular waveguide devices can be directly Uwe Rosenberg 1 , Ralf Beyer 1 , Peter Krauß 1 , Thomas
transferred to this novel substrate-integrated waveguide.
Sieverding 1 , Petronilo Martin Iglesias 2 , Christoph
Ernst 2 ; 1 Mician Global Engineering, Germany; 2 ESA,
The Netherlands
EuMC34-4, Time: 10:00
A novel reconfigurable (de-)multiplexer DEMUX solution is intro-
duced that allows flexible re-allocation of bandwidths and center
frequencies of the associated high-Q cavity channel filters. The
filters are interconnected with a manifold. For the reconfiguration
of the responses, a synchronous movement of the cavity end-walls
of each filter is considered. This is the final implementation of
the DEMUX requires only two actuation drives per filter for the
re-allocation of bandwidths and center frequencies. The solution
28
EuMC 2016 4–6 October 2016 London, UK
has been proven by an elementary 2-channel DEMUX configuration Results prove the feasibility of the system, which can meet the
with 4-order filters using TM120 mode cavity types. The results of exposure limits while providing the required dynamic range to let
the overall DEMUX design demonstrate the feasibility of this new the receiver detect the cancer anomaly. In addition, the dosimetric
general approach. quantities used at the present and their maximum limits at mm-
waves are taking into discussion and the possibility of needing
Analysis and Design of a Directional Coupler with moderns quantities and limitations is discussed.
Integrated Matching Network for Reflective-Type
Wearable Device for Microwave Head Imaging
Phase Shifters
Mohd. Saiful Riza Bashri 1 , Tughrul Arslan 1 , Wei
Pablo Alcón, Nuria Esparza, Luis Fernando Herrán,
Zhou 2 , Nakul Haridas 2 ; 1 University of Edinburgh, UK;
Fernando Las-Heras; Universidad de Oviedo, Spain 2
EuMC34-5, Time: 10:20 Sofant Technologies, UK
EuMC35-3, Time: 09:40
This paper presents an analysis of a novel topology for a reflective-
type phase shifter which serves simultaneously as a directional A wearable microwave head imaging is proposed for medical
coupler and complex impedance matching network, optimizing applications, namely stroke and cancer detection. The wearable
the chip size and the output for any given reflective load. First, device in a hat-like structure incorporates an array of flexible
the usual 3 dB hybrid coupler and matching network pairing is ultra-wideband antenna. The antenna array consists of 8 monopole
generalized to a 4-port network, which is then used as a step to antenna elements which act as multi-static radar. A lossy dielectric
study another passive network with different relations between absorber is embedded inside the hat to improve the directivity
its S parameters. Such network offers more flexibility in the of the antenna. The antenna operates in the frequency range of
optimization of the phase shifter and thus opens up solutions with 1.5GHz to 4GHz which would provide sufficient penetration and
more desirable relations between phase shift range and insertion resolution for the proposed head imaging system. A thin and
loss. A possible implementation of the network is then proposed flexible FR-4 of thickness 0.2mm is used as the substrate of the
and scrutinized through even-odd mode analysis, proving capable antenna. The performance of the antennae when arranged in a hat
of delivering the intended network. Finally, a prototype was like shape structure was measured and analysed. The return loss
manufactured and measured, increasing the phase shift range of a of the antennae shows a match across all the operating frequency
varactor more than threefold while maintaining low insertion loss range. The average simulated gain of the antenna is 3 dBi.
and low gain variation.
Large Field-of-View Transmission Line Resonator for
High Field MRI
EuMC35 : Biomedical Imaging Vitaliy Zhurbenko 1 , Kristjan Sundgaard
Room 13, 09:00–10:40, Thursday 6th October 2016
Johannesson 1 , Vincent Boer 2 , Esben Thade Petersen 2 ;
Chair: Nutapong Somjit, University of Leeds 1
Co-Chair: Bart Nauwelaers, KU Leuven Technical University of Denmark, Denmark;
2
Hvidovre Hospital, Denmark
Microwave Mammography with a Small Sensor and EuMC35-4, Time: 10:00
a Commercial Electromagnetic Simulator Transmission line resonators is often a preferable choice for coils
in high field magnetic resonance imaging (MRI), because they
Yoshihiko Kuwahara; Shizuoka University, Japan
provide a number of advantages over traditional loop coils. The
EuMC35-1, Time: 09:00 size of such resonators, however, is limited to shorter than half a
We propose a microwave mammography system with a small wavelength due to high standing wave ratio, which leads to inho-
sensor and a commercial electromagnetic simulator. The sensor mogeneous field distribution along the resonator. In this work, it
has features such as multiple polarizations to collect a variety is demonstrated that the resonator length can be extended to over
of data and fixation of the breast by suction to prevent imaging half a wavelength with the help of series capacitors. The approach
mistakes. A commercial electromagnetic simulator is used to allows for reduced standing wave ratio and improved field homo-
model the sensor accurately and enhance reliability. In addition, geneity. Achieved magnetic field distribution is compared to the
a new calibration method that transforms the S parameters into a conventional transmission line resonator. Imaging experiments
scattered electric field at each feed is proposed. The effectiveness are performed using 7 Tesla MRI system. The developed resonator
of the proposed system is demonstrated by a numerical experi- is useful for building coils with large field-of-view.
ment.
Time Domain Microwave Imaging System for
Breast Cancer Imaging at mm-Waves: Feasibility Biomedical Applications
Study on the Safety Exposure Limits
Xuezhi Zeng, Albert Monteith, Andreas Fhager, Mikael
P.F. Espin-Lopez 1 , A. Martellosio 1 , Marco Pasian 1 , Persson, Herbert Zirath; Chalmers University of
Maurizio Bozzi 1 , Luca Perregrini 1 , A. Mazzanti 1 , F. Technology, Sweden
Svelto 1 , M. Bellomi 2 , G. Renne 3 , P.E. Summers 3 ; EuMC35-5, Time: 10:20
1
Università di Pavia, Italy; 2 Università di Milano, Italy; A time domain microwave imaging system for biomedical ap-
3
IEO, Italy plications was developed using off-the-shelf components. Two
EuMC35-2, Time: 09:20 different types of signals: a pulse and a pseudo random sequence,
Breast cancer is a leading disease worldwide, and the success of were employed as stimulus signal. The system’s measurement
medical therapies is heavily related to the availability of breast accuracy and imaging functionality were investigated when these
cancer imaging techniques. While current methods, mainly ultra- two different stimulus signals were used respectively. The results
sound, x-ray mammography, and magnetic resonance imaging, all show that the system has a higher dynamic range when the pseudo
exhibit some disadvantages, a possible alternative investigated in random sequence was used. An imaging test also indicates the
recent years is based on microwave and mm-wave imaging system. advantage, although not significant, to using the pseudo random
sequence than the pulse.
29
EuMC 2016 4–6 October 2016 London, UK
40-dB for large signal input. The possible cause is the change of
EuMC36 : High Performance Transceivers average FET off capacitance. This MMIC switches with HPF/LPF
and Switches switching concept promises to provide new switch products having
high power handling capability with low cost.
Room 14, 09:00–10:40, Thursday 6th October 2016
Chair: Dominique Morche, CEA - LETI Wideband and High Isolation RF Carrier-Aggregated
Co-Chair: Franz Dielacher, Infineon Technologies
Switch Module for LTE-Advanced Base Station
A 122-GHz System-in-Package Radar Sensor with Jian-Yu Li, Wen-Chien Chang; Yuan Ze University,
BPSK Modulator in a 130-nm SiGe BiCMOS Taiwan
Technology EuMC36-4, Time: 10:00
1 1 LTE-Advanced (LTE-A) base station with carrier aggregation (CA)
Muhammad Furqan , Faisal Ahmed , Reinhard
function can meet the larger capacity demand and improve the
Feger 1 , Klaus Aufinger 2 , Andreas Stelzer 1 ; 1 Johannes spectrum efficiency. To fulfill such function, the wide operational
Kepler Universität Linz, Austria; 2 Infineon bandwidth and high isolation carrier-aggregated switch module is
Technologies, Germany proposed to combine two RF signals, namely, component carriers
EuMC36-1, Time: 09:00 (CCs) in this work. There are many CA scenarios defined in 3GPP
TS 36.104, examples of two 20 MHz LTE-A Release-10 CCs at Band
This paper presents a 122-GHz bistatic radar sensor for short-range 40 and Band 1+Band 5 are used to verify the feasibility of the
applications. The chip features a fully differential frequency multi- proposed module in both the intra-band and inter-band CA.
plier (×30 or ×6) to realize a frequency-modulated continuous-wave
radar with a binary phase-shift keying modulator in the transmit
chain and a fully-differential IQ-receiver. The bare die is packaged
A Compensated Dual-Band SPDT Switch for Radar
in an embedded-wafer-level-ball-grid-array (eWLB) technology. The Duplexers at S- and X-Band
redistribution layer of the eWLB package is utilized to realize eight- Nils Hansen, Christian Rave, Benjamin Rohrdantz,
element tapered rhombic transmit and receive antenna arrays. The
packages are fabricated with and without backside metallization Arne F. Jacob; Technische Universität
to demonstrate the effect on radiation pattern symmetry and Hamburg-Harburg, Germany
sidelobe levels. On-wafer measurement results show a maximum EuMC36-5, Time: 10:20
transmit output power of 2.7dBm and a 3-dB bandwidth of 17 GHz. A single-pole double-throw (SPDT) switch for a dual-band radar
The in-package TX/RX antennas provide a measured gain of 11 duplexer at S- and X-band is presented. The switch is particularly
dBi which results in an effective isotropic radiated power of 13.7 useful for monostatic phased array radars where a high isolation
dBm. The entire chip consumes a DC power of 540mW at a supply between transmitter and receiver is necessary. It consists of three
voltage of 3.3V. PIN-diodes and needs only one switching voltage. A high isolation
and a low insertion loss combined with the potential for a high
A Broadband, Compact 140–170GHz Double power handling capability are achieved by utilizing an asymmetric
Side-Band Receiver in 90nm SiGe Technology PIN-diode network with shunt diodes in the transmit and a series
diode in the receive path. The isolation is improved at both
Deeksha Lal, Morteza Abbasi, David S. Ricketts; North frequency bands by compensating the parasitic capacitance of the
Carolina State University, USA series diode. Simulation and measurement results are presented.
EuMC36-2, Time: 09:20 The fabricated switch exhibits an isolation of more than 30 dB and
This paper reports the design and characterization results of a an insertion loss of less than 1.4 dB in the transmit case.
broadband, compact 140–170 GHz Double Side-Band (DSB) receiver
fabricated in a 90nm SiGe process. The design is based on a
balanced Gilbert cell, with on-chip integrated LO and RF baluns EuMC37 : Stochastic Methods for Complex
and an IF Variable Gain Amplifier (VGA). The receiver exhibits up EMC Systems
to 7dB conversion gain with an RF bandwidth extending beyond Room 16, 09:00–10:40, Thursday 6th October 2016
the frequency range of 140–170 GHz. The measured single sided
Chair: Valter Mariani Primiani, Università Politecnica delle Marche
1dB and 3dB IF bandwidths are 10 GHz and 16 GHz respectively, Co-Chair: Gabriele Gradoni, University of Nottingham
making this circuit useful for block down-conversion of broadband
communication signals or high resolution radar applications. A
maximum output power of 0dBm is measured, with an output 1dB Parametric Analysis of Load Variation in WPT
compression point of -4dBm. The conversion gain of the receiver Systems Applied to AIMDs
can be varied by as much as 6dB through the integrated VGA, thus
Silvano Cruciani, Tommaso Campi, Mauro Feliziani;
enabling equalization of the frequency response. The DSB mixer is
simulated to have a noise figure of 10dB±0.5dB across the oper- Università dell’Aquila, Italy
ation frequency band, which is comparable to noise performance EuMC37-1, Time: 09:00
that could be achieved from integrating a low noise amplifier (LNA) This study deals with the analysis of a Wireless Power Transfer
in the front-end. The chip consumes 40mA from a 3.4V supply (WPT) system in a biomedical application. In particular we analyze
and requires 3 dBm of LO power. It occupies a compact area of the effect of the load variation on the WPT efficiency and on
0.6mm×0.15mm excluding pads, which favors further integration the Electric and Magnetic Field (EMF) S afety metrics for human
into receiver arrays. exposure, i.e., Specific Absorption Rate (SAR) and electric field
induced in the human body. Then, methods for the reduction of
GaN SPST MMIC Switches Based on HPF/LPF EMF safety quantities are proposed comparing different methods
Switching Concept for High Power Applications applied to a realistic case of study as a pacemaker equipped with a
WPT system.
Hiroshi Mizutani 1 , Ryo Ishikawa 2 , Kazuhiko Honjo 2 ;
1
Salesian Polytechnic, Japan; 2 University of Time Domain Measurement of Near Field Emissions
Electro-Communications, Japan from Complex PCBs
EuMC36-3, Time: 09:40
D.W.P. Thomas, Christopher Smartt, H. Nasser,
This paper describes the demonstrated GaN SPST MMIC switches
Mohd H. Baharuddin, S. Greedy, Gabriele Gradoni, S.C.
based on HPF/LPF switching concept for high power applications.
The developed MMIC switches indicate high isolation of more than Creagh, Gregor Tanner; University of Nottingham, UK
80-dB with insertion loss of better than 2-dB below 2.4 GHz. The EuMC37-2, Time: 09:20
effective chip size is 1.15 × 1.58 mm2 . The measured P1dB of This paper discusses how the measurements of the near-field
insertion loss is 31.2-dBm. The isolation varies with respect to the emissions in the time domain can be used to characterize the
input power from about 80-dB at small signal operation to about broadband emissions from complex sources such as multifunc-
30
EuMC 2016 4–6 October 2016 London, UK
tional Printed Circuit Boards (PCBs). The near-fields, transverse equipped with two rotating paddels in order to replicate the signal
to the measurement surface, are sufficient to characterise the fluctuations that are typical for the mentioned environments.
radiator provided the surface contains all the significant fields. The effects of Doppler shift and its fast variations are presented,
For time domain measurements, the field probe is calibrated over together with an analysis of the efficiency of different transmission
a broad bandwidth for both amplitude and phase to provide the solutions for tunnels.
probe impulse response. A suitable digital filter applied with the
same probe impulse response to extract the time domain magnetic
field data from the probe output voltage. Results show that good EuMC38 : Antenna Technology
agreement in the can be obtained. The measured near fields can Room 17, 09:00–10:40, Thursday 6th October 2016
then be used to create an equivalent model of the PCB which can be
Chair: Ioan Lager, Delft University of Technology
used to predict the emissions in the far field or in any environment.
Co-Chair: Dirk Heberling, RWTH Aachen
In this work the objective is to create an equivalent time dependent
dipole array model of the DUT.
Chip-Mounted Dielectric Resonator Antenna with
Random Coupling Model for the Radiation of Alignment and Testing Features
Statistical Sources Inside Cavities Daniel López Cuenca 1 , Jan Hesselbarth 1 , Golzar
Gabriele Gradoni 1 , Thomas M. Antonsen 2 , Ed Ott 2 , Alavi 2 ; 1 Universität Stuttgart, Germany; 2 IMS CHIPS,
Steven M. Anlage 2 ; 1 University of Nottingham, UK; Germany
2 EuMC38-1, Time: 09:00
University of Maryland, USA
EuMC37-3, Time: 09:40 A new concept for an on-chip millimeter-wave dielectric resonator
antenna is presented. A spherical dielectric resonator is placed
We review a statistical model, the random coupling model, that de-
on the chip surface and is excited by an on-chip microstrip feed.
scribes the high-frequency excitation of irregular cavities through
A shallow crate is etched in the polymer layers atop the bulk
arbitrary sources. The model uses wave chaos theory to describing
semiconductor, in close proximity of the microstrip feed. The
wave mixing in terms of universal fluctuation laws. The model
dielectric sphere placed into the crate will position itself to high
accounts for system specific details of the excitation through
precision. The microstrip feed structure forms a parallel resonant
a deterministic description. We consider the scenario where a
circuit from line to ground. Before mounting the sphere, the feed
continuous statistical source operates inside an irregular cavity
point can be on-wafer tested with conventional 50 Ohm ground-
with losses. Discrete approximations of complex sources in terms
signal-ground probes. Measurements at 69 GHz are presented.
of dipoles are available in literature. This can be exploited to
The concept combines mechanical simplicity and low signal loss.
construct an impedance matrix at the terminals (ports) of the
dipole, and thus characterise the response of the cavity in terms Hybrid Metal-Plasma Yagi-Uda Antenna for
of voltages and currents. In particular, upon a random current
excitation, conveniently characterised in terms of correlation Microwave Applications
matrix, an ensemble average voltage-voltage correlation matrix Giulia Mansutti, Davide Melazzi, Antonio-Daniele
can be found through the impedance matrices predicted by the
Capobianco; Università di Padova, Italy
random coupling model. Results are of interest in electromagnetic
compatibility for the characterisation of multifunctional digital EuMC38-2, Time: 09:20
electronics, as well as for dense multiple-input multiple-output In this work, a feasibility study of a hybrid metal-plasma Yagi
communication operating in reflecting environments. antenna operating at 1.55GHz is presented. In particular, the
directors of the antenna are constituted of microplasma dis-
Antenna Efficiency Measurement from Quality charges that allow to realize very thin and short plasma tubes,
Factor Estimation in Reverberation Chamber thus overcoming some issues related to the use in the GHz regime
of classic thick plasma discharges. We will show that this design
P. Besnier, J. Sol, A. Presse, C. Lemoine, A.-C. Tarot; choice leads to good results in terms of gain with respect to the
IETR, France classic metal Yagi antenna, thus paving the way to a new class of
EuMC37-4, Time: 10:00 hybrid reconfigurable antennas operating at high frequencies.
This communication deals with a method that enables to extract Antenna Coupling and Self-Interference Cancellation
antenna efficiency estimation from reverberation chamber mea- Bandwidth in SAW-Less Diversity Receivers
surements and more specifically from the composite Q-factor
estimation of the reverberation chamber. It is another variant D. Montanari, Lorenzo Silvestri, Maurizio Bozzi, D.
of antenna efficiency measurement method in a reverberation Manstretta; Università di Pavia, Italy
chamber that takes advantage of the properties of the composite EuMC38-3, Time: 09:40
Q-factor that involves various components including the quality
factor of antennas themselves. We show that in a well-overmoded Self-interference (SI) cancellation techniques are a promising solu-
cavity, the Q-factor measured from two antennas in the chamber tion to improve the dynamic range of SAW-less frequency-division
gives access to the contrast of their efficiency. Estimation uncer- duplexing (FDD) diversity receivers. The achievable isolation
tainty is discussed with regard to the substitution method. between transmitter and diversity receiver over the transmit signal
bandwidth is limited by the strength and frequency selectivity
of the coupling between main and diversity antennas. In this
Optimization of 4G Wireless Access Network
work we investigate these limitations under realistic conditions
Features by Using Reverberation Chambers: for long-term evolution (LTE) mobile terminals. A pair of planar
Application to High-Speed Train LTE Users inverted-F antennas (PIFAs) has been designed and tested in four
different configurations. A broadband current-mode canceler
Massimo Barazzetta 1 , Davide Micheli 2 , Riccardo model was applied to the measured data showing, in all cases,
Diamanti 2 , Luca Bastianelli 3 , Franco Moglie 3 , Valter a 20dB cancellation bandwidth of 14MHz, mainly limited by the
Mariani Primiani 3 ; 1 Nokia, Italy; 2 Telecom Italia, Italy; antennas y21 group delay, close to 2ns.
3
Università Politecnica delle Marche, Italy
Pattern Reconfigurable Antenna at 2.45GHz for WSN
EuMC37-5, Time: 10:20
and WBAN Applications
A real 4G base station connected to live network of Telecom Italia
and radiating into a reverberation chamber is used to investigate Anupam R. Chandran, Nick Timmons, Jim Morrison;
performances of fast moving terminals on board of high-speed LYIT, Ireland
trains. The results concern a testing campaign by replicating real EuMC38-4, Time: 10:00
high speed train propagation scenarios, like the train running in
open space or in tunnels, with the aid of a reverberation chamber. A pattern reconfigurable antenna at 2.45 GHz industrial, scientific
This is partially filled by absorbing materials in order to approach and medical (ISM) band that can switch the beam pattern in various
the multipath propagation that is typical of a train coach, and directions such as in the boresight direction, 66◦ , 294◦ , and as
a bidirectional endfire radiator is proposed in this paper. The
31
EuMC 2016 4–6 October 2016 London, UK
concept used here is that of switching between the director and transfer efficiency are within +/- 5%. Thus, cavity mode enabled
reflector of Yagi-Uda antenna using PIN diodes. The resonance wireless power transfer can be analyzed with an equivalent circuit
frequency of the antenna remains constant irrespective of the di- model allowing for fast design iteration and a better understanding
rection of the switched beam. This pattern reconfigurable antenna of how to optimize system performance. We used the circuit
will have potential use in body area networks (BAN) or in wireless model developed herein to design a simple impedance matching
sensor networks (WSN). network for 52 LED receivers and transferred power wirelessly to
all of them simultaneously with approximately 30% efficiency, by
24GHz Dielectric Filled Waveguide Fed Horn combining two cavity modes, TE011 and TE012 . However, under
Antenna Using 3D-LDS MID Technology optimal load condition, which requires more complicated matching
circuit, a minimum efficiency of 50% can easily be achieved at the
Aline Friedrich 1 , Bernd Geck 1 , Malte Fengler 2 , same positions, we instead here we focused on a simple and fast
Andreas Fischer 2 ; 1 Leibniz Universität Hannover, design solution.
Germany; 2 LPKF Laser & Electronics, Germany
EuMC38-5, Time: 10:20
A Resonance Frequency Tracker and Source
Frequency Tuner for Inductively Coupled Wireless
This paper presents the evaluation of dielectric tapered horn
antennas that are fed by planar radio frequency (RF) transmission Power Transfer Systems
line to dielectric filled waveguide transitions. The antennas are Seyit Ahmet Sis, Sabri Bicakci; Balikesir University,
developed to be efficiently manufactured with the laser direct
structuring (LDS) method that allows for a 3d metalization of
Turkey
plastic surfaces. In doing so the flexibility of the antenna design EuMC39-3, Time: 12:00
process is increased. Furthermore the antennas can be directly Inductively coupled resonant loops, for use in wireless power
combined with a circuitry if required. First of all, a fundamental transfer applications up to several meters, exhibit the largest
evaluation is done by means of two different transitions from transfer efficiency when the loops operate at the strongly coupled
typical RF transmission lines to a rectangular dielectric filled regime. At the same time, this largest efficiency is independent
waveguide at 24 GHz. Based on these findings a test antenna is of the mutual inductance between the loops. However, the res-
designed and subsequently manufactured with the LDS method. onance frequencies, at which this largest efficiency occurs, vary
To evaluate the manufacturability with the LDS method in general with mutual inductance or the distance and orientation between
and additionally prove the concept, the configuration of this test the loops. Therefore, the RF source frequency should be tuned
antenna is kept relatively simple. The prototype is characterized to the resonance frequency of the loops. This paper presents
in an anechoic chamber and the results are discussed. In the next a resonance frequency tracker and source frequency tuner for
step an additional example design that is based on an typical inductively coupled resonant loops. The inductively coupled
dielectric antenna is discussed. To conclude, the results obtained loops are represented by a lumped element circuit with a tunable
are summarized and discussed with respect to a use for the inductor that resembles the variation of mutual inductance. The
development of RF applications. resonance frequency is tracked by sampling the incident and
reflected RF signal using a bidirectional coupler and calculating
the input reflection coefficient. The source frequency is tuned
EuMC39 : Wireless Power Transfer until the reflection coefficient is minimized. Each individual part
Room 11, 11:20–13:00, Thursday 6th October 2016 of the overall system is fabricated and tested, and the controller is
programmed. The complete tracking & tuning system is simulated
Chair: Kamran Ghorbani, RMIT University
Co-Chair: Alessandra Costanzo, University of Bologna based on these measurement results.
32
EuMC 2016 4–6 October 2016 London, UK
netic field by changing current distribution. In receiving side, two A New Class of SIW Filters Based on Periodically
perpendicular coil having structure of ‘plus’ (+) shape is proposed Perforated Dielectric Substrate
to solve the angular misalignment. For validation, the proposed
wireless power charging system was implemented at 6.78MHz
Lorenzo Silvestri 1 , Enrico Massoni 1 , Maurizio Bozzi 1 ,
using loosely coupled resonant coils, and we verified that the Luca Perregrini 1 , Cristiano Tomassoni 2 , Angela
proposed system is robust to misalignment. Coves 3 ; 1 Università di Pavia, Italy; 2 Università di
Perugia, Italy; 3 Universidad Miguel Hernández de
EuMC40 : Compact Implementation of Elche, Spain
EuMC40-4, Time: 12:20
Filters and Diplexers
A novel class of substrate integrated waveguide (SIW) filters based
Room 12, 11:20–13:00, Thursday 6th October 2016
on perforations of the dielectric substrate is presented in this
Chair: Vicente Boria, Universidad Politécnica de Valencia paper. The air-hole perforations allow the local modification of the
Co-Chair: Roberto Gomez, Universidad de Alcalá characteristic impedance of the SIW as well as its cutoff frequency,
thus permitting the easy design of filtering structures. Four-pole
A Novel Dielectric-Loaded Dual-Mode Cavity for filters operating at 3.6 GHz, based on conventional and half-mode
Cellular Base Station Applications SIW, have been designed, experimentally validated, and discussed.
The proposed approach provides high flexibility, low sensitivity to
Mustafa S. Bakr, Saad W.O. Luhaib, Ian C. Hunter; fabrication inaccuracy, and simple design rules.
University of Leeds, UK
EuMC40-1, Time: 11:20 A Ka-Band Substrate-Integrated Waveguide Diplexer
A new class of dual mode dielectric resonator filter for mobile with Wide Frequency Spread
communication systems is presented. The proposed resonator
Thomas Jaschke, Benjamin Rohrdantz, Jan-Philip
exhibits high unloaded quality factor and reasonably wide spuri-
ous operating window. Based on this cavity, a 4-pole dual-mode Mohncke, Arne F. Jacob; Technische Universität
Generalised Chebyshev filter is developed and fabricated in the Hamburg-Harburg, Germany
stacked configuration. An unexpected spurious mode is appeared EuMC40-5, Time: 12:40
at 2.3 GHz due to improper coupling. A coupling technique for
A compact 20 GHz/30 GHz diplexer for satellite communication
eliminating the unexpected spurious resonance is proposed. The
systems is presented. It consists of a T-junction and two bandpass
obtained experimental and measured results with an asymmetric
filters implemented in substrate-integrated waveguide (SIW) tech-
transmission zeros confirm the validity of the proposed resonator
nology. The 30GHz filter relies on a standard design, whereas a
for releasing filters for cellular-radio base stations.
wide stopband approach is used for the 20 GHz filter to suppress a
parasitic passband at the upper frequency. The design procedure
Transmission Zero Realization in E-Plane Filters by is explained and simulation as well as measurement results are
Means of I/O Resonator Tapping presented. The complete diplexer is fabricated in a standard PCB
process. The measurement results validate the approach.
Efstratios Doumanis 1 , George Goussetis 2 , J.
Huurinainen 2 ; 1 Nokia, Ireland; 2 Heriot-Watt
University, UK EuMC41 : Techniques and Microwave
EuMC40-2, Time: 11:40 Devices for Controlling Surface Waves
A new topology for E-plane filters compatible with the traditional Room 1, 11:20–13:00, Thursday 6th October 2016
low-cost single metal insert in a split-block housing is proposed. Chair: Symon Podilchak, Heriot Watt University
Improved out-of-band rejection is achieved by virtue of the Co-Chair: George Goussetis, Heriot Watt University
transmission zeros. The overall length of the input and output
resonators is reduced by ∼45%, resulting in saving the length of
a resonator. A synthesis procedure is outlined. A 4pole filter is
The Role of Surface Waves in Design of Planar
demonstrated that implements 2 out-of-band TZs. The technique Leaky Wave Antennas
is well suited to be combined with an extracted pole technique Samir F. Mahmoud 1 , Symon K. Podilchak 2 , Alois P.
further improving the out-of-band characteristics of the filters.
The same 4pole filter is then adopted to accommodate for extra 4 Freundorfer 3 , Yahia M.M. Antar 3 ; 1 Cairo University,
TZs by means of extraction. The simulated loss of the two 4 pole Egypt; 2 Heriot-Watt University, UK; 3 RMCC, Canada
filter presented is 0.22 dB and 0.24 dB, respectively. EuMC41-1, Time: 11:20
We study two types of leaky wave antenna structures and the role
Substrate-Integrated-Waveguide Signal-Interference of surface waves in their design. The first leaky wave antenna is a
Bandpass Filters multi-dielectric structure of layered contrasting refractive indices.
We review a rigorous derivation, by the present authors, of the
Dimitra Psychogiou 1 , Roberto Gómez-García 2 , radiation and surface wave powers excited by an embedded dipole
José-María Muñoz-Ferreras 2 , Dimitrios Peroulis 1 ; source. It is shown that with this type of leaky wave antenna,
1
Purdue University, USA; 2 Universidad de Alcalá, Spain the excitation of surface waves can drastically lower the antenna
EuMC40-3, Time: 12:00 radiation efficiency. The latter is obtained in a closed form. The
second leaky wave structure considered is based on the efficient
This paper demonstrates the first experimental development of excitation of surface waves on a dielectric slab. By introducing a
transversal signal-interference bandpass filters (BPFs) in substrate- suitable grating screen, the surface wave is smoothly converted
integrated-waveguide (SIW) technology. They consist of bi-path into a leaky wave with a desirable radiation beam in the far-field. In
transversal filtering sections (TFSs) that are based on 3-dB hybrid this type of leaky wave antenna, efficient surface wave excitation is
rings that are loaded with short-ended stubs in two of their ports. a key design step. We also review our perturbation analysis to find
To attain circuit-size reduction in the overall TFS, a T-septum-ridge the radiation properties of planar periodic leaky wave antennas
SIW is utilized as a transmission-line medium for its constituent and certain design consideration are also recommended.
modules. Furthermore, in order to allow excitation through
conventional RF connectors, a broad-band microstrip-to-T-septum-
ridge-SIW transition is developed. For practical validation, a 6-GHz
Controlling Surface Waves with Metasurfaces: From
SIW TFS prototype featuring 3-dB bandwidth (BW) of 1.1 GHz — i.e., Planar Propagation to Conformal Cloaking
3-dB fractional bandwidth (FBW) ≈18% — and minimum in-band Ladislau Matekovits, Giuseppe Labate; Politecnico di
insertion loss (IL) of 1.28 dB is constructed and characterized. In
addition, measured results of a manufactured 5.25-GHz higher- Torino, Italy
order BPF (two series-cascaded SIW TFSs) with 790-MHz 3-dB BW — EuMC41-2, Time: 11:40
i.e., 3-dB FBW ≈15% — and 1.26-dB minimum in-band IL, are also Surface electromagnetic modes, occasionally formed by natural-
shown. existing 2D boundary conditions, can be enhanced and controlled
33
EuMC 2016 4–6 October 2016 London, UK
This paper reviews our recent work on the use of surface wave In this paper, we demonstrate a novel, compact setup for the
engineering to enhance the functionality of a type of leaky wave characterization of homogeneous plastic materials. The method is
antenna known as the ‘Bull’s eye,’ operating in the license free 60 based on reflection ellipsometry and is adopted to the millimeter
GHz band. The Bull’s eye antenna comprises a sub-wavelength wave regime by using horn antennas for linear polarization of the
aperture surrounded by a planar surface patterned with concentric transmitted electromagnetic field. The design of the measurement
corrugations. Exploiting well-known coupling relations between system and the influence of different setup related parameters on
surface waves on corrugated surfaces, and free space waves, we its accuracy are discussed. Finally, the dispersion of the refractive
can control the angle at which the antenna’s beam is directed index over the frequency range between 75GHz and 110 GHz is
via engineering the surface corrugations. We have shown via presented and analyzed for different dielectric samples.
simulation and experiment that the beam can be deflected from
the normal (or boresight) in a predictable manner, or split into two Collision Frequency Determination of Low-Pressure
beams which themselves can be independently deflected. In this Plasmas Based on RF-Reflectometry
paper we emphasise the degree of control possible over the beam
by mixing together different E-plane and H-plane shifts. Christian Schulz, Ilona Rolfes, Moritz Oberberg, Peter
Awakowicz; Ruhr-Universität Bochum, Germany
Electronically-Reconfigurable Parallel-Plate Wave EuMC42-2, Time: 11:40
Launchers Based on Corrugated Substrate Integrated This paper introduces a robust collision frequency determina-
Leaky Waveguides with Tunable Components tion of low-pressure plasma processes. Based on the multipole
resonance probe and in-situ reflection measurements, the input
José Luis Gómez-Tornero 1 , Raúl Guzmán-Quirós 1 , admittance of the system probe-plasma can be calculated. It
George Goussetis 2 , Symon K. Podilchak 2 ; 1 Universidad can be used to determine the collision frequency via its width.
Politécnica de Cartagena, Spain; 2 Heriot-Watt The proposed evaluation is investigated by numerous parameter
variations within 3D electromagnetic field simulations. For plasma
University, UK electron frequencies, which can be determined simultaneously,
EuMC41-4, Time: 12:20 over 4 GHz or collision frequencies below 200 MHz, a two-step
We present some initial designs of electronically-controlled circuits compensation is necessary for reliable results. Based on the
based on the corrugated substrate integrated leaky waveguide, proposed compensation, a maximum error of ± 5% can be reached
which shunt open-ended quarter-wave stubs are loaded with within the simulations. The final measurements in an argon-oxygen
tunable-capacitance components (such as varactor diodes, MEMs plasma confirm the suitability of the presented evaluation.
switches, or liquid crystals). It is demonstrated that this topology
permits the electronic control over the angle at which the wave is A Novel Microwave Frequency Sweep
launched on the host parallel-plate substrate. This way, original Interferometer for ECR Plasma Electron Density
simple reconfigurable integrated circuits are envisaged. Full-wave
simulations are performed on two preliminary C-band designs. The
Measurements
first circuit is an electronically-scanned plane-wave wave launcher Giuseppe Torrisi 1 , Ornella Leonardi 1 , Gino Sorbello 1 ,
for reconfigurable scanned slot-array antennas. The second design David Mascali 1 , Giuseppe Castro 1 , Luigi Celona 1 ,
is a new type of quasi-optical single-pole four-throw (SP4T) switch
for integrated beam forming networks. Rosalba Miracoli 2 , Santo Gammino 1 ; 1 INFN-LNS, Italy;
2
Consorcio ESS-Bilbao, Spain
Advances in Nonlinear, Active, and Anisotropic EuMC42-3, Time: 12:00
Artificial Impedance Surfaces The paper presents the measurement strategy and the experimental
results collected by a novel microwave interferometer for plasma
Daniel Sievenpiper, Sanghoon Kim, Jiang Long, Jiyeon density measurements in compact Electron Cyclotron Resonance
Lee; University of California at San Diego, USA Ion Sources (ECRIS). Microwave interferometry represents the best
EuMC41-5, Time: 12:40 candidate for non-intrusive plasma diagnostics in these plasma
We discuss recent advances in nonlinear, active, and anisotropic devices, being also a challenging task because the plasma under
artificial impedance surfaces. These structures are a form of test is contained in a microwave resonant cavity. The developed
planar metamaterial in which the impedance is defined by a K-band microwave interferometry system is based on the so-called
periodic metallic structure which may include nonlinear or active “frequency sweep” or FMCW method. This method is very versatile,
components. In order to achieve high anisotropy in arbitrary easy to integrate and robust with respect to the uncontrolled
patterns, nonperiodic structures are required. By adding nonlinear disturbances of the spurious reflections introduced by the cavity
elements such as diodes, varactors, and other components, power- boundaries, which give rise to additional frequency components
dependent and frequency self-tuning structures may be built. In in the beating frequency spectrum. The direct signal component
addition, by incorporating active components such as non-Foster has been extracted by bandpass filtering, i.e. by filtering out the
circuit elements, is possible to make broadband fast-wave and multipath contributions. The paper includes the description of the
slow-wave structures which provide a wide degree of control over calibration setup, performed by a holed paraffin block where the
the interaction between electromagnetic waves and the surface. paraffin-air index of refraction variation imitates the air-plasma
one, and the first measurements on a real plasma obtained at the
Italian National Institute for Nuclear Physics (INFN-LNS).
34
EuMC 2016 4–6 October 2016 London, UK
Non-Destructive Testing for Black Heart Cavities in Discrete Gate Bias Modulation of a Class-G
Potatoes with Microwave Radiation Modulated RF Power Amplifier
Imran Mohamed 1 , Richard Dudley 1 , Andrew Nikolai Wolff, Wolfgang Heinrich, Olof Bengtsson; FBH,
Gregory 1 , Ralf Mouthaan 1 , Zhengrong Tian 1 , Paul Germany
Andrews 2 , Andrew Mellonie 3 ; 1 NPL, UK; 2 MMG Citrus, EuMC43-2, Time: 11:40
UK; 3 Marks and Spencer, UK In this paper the combination of class-G supply modulation with
EuMC42-4, Time: 12:20 discrete level gate bias modulation is investigated. Previous work
with class-G supply modulation revealed that the supply voltage
A first investigation into the use of microwaves for the non-
switching causes sharp discontinuities in gain and phase of the
destructive testing for the presence of black heart cavities is
modulated baseband signal. Now it is found that either the gain or
presented. Additionally a potato’s complex permittivity data be-
phase discontinuity can be compensated by applying dynamic gate
tween 0.5 GHz to 20 GHz measured using a coaxial sensor and the
modulation synchronously with the class-G modulation. Further-
recipe for a potato phantom are also presented. Electromagnetic
more, reducing the gain discontinuity allows generating the control
finite-difference time-domain simulations of potatoes show that
signal for the supply modulator by an envelope power detector.
changes to how microwaves propagate through a potato caused
This enables to realize a highly efficient class-G system as a simple
by a cavity can produce measurable changes in S21 at the potato’s
plug-in solution for the standard single-input single-output (SISO)
surface of up to 26 dB. Lab-based readings of the change in S21
PAs in a digital predistortion linearized system.
caused by a phantom cavity submerged in a potato phantom liquid
confirms the results of the simulation, albeit at a much reduced
magnitude in the order of 0.1 dB.
Generalised Digital Predistortion of RF Power
Amplifiers with Low-Rate Feedback Signal
Design of Experiment for the Characterization of a Ziming Wang, Sarah Adel Ibrahim, Han Su, Ronan
160GHz Radar MMIC Farrell; Maynooth University, Ireland
Martin Hitzler 1 , Sebastian Bader 1 , Stefan Saulig 1 , EuMC43-3, Time: 12:00
Linus Boehm 1 , Winfried Mayer 2 , Christian Assuming there is an infinite periodically sinusoidal signal x with
Waldschmidt 1 ; 1 Universität Ulm, Germany; known frequency, one can sample x at Nyquist zone or sampling-
2 rate to recover the signal. In terms of digital predistortion (DPD)
Endress+Hauser, Germany with modulated signal as input, this paper will show the same
EuMC42-5, Time: 12:40 concept that theoretically one can sample the feedback signal at
In this paper, the methods of design of experiment (DoE) are ap- arbitrary sampling rate to obtain the same coefficient of DPD or
plied to evaluate a 160 GHz radar monolithic microwave integrated behavioural models as the one calculated from the high sampling
circuit (MMIC). Due to a strong nonlinear transmitter (Tx) with rate feedback signal. The performance of a generalised DPD
five adjustable input variables and several cascaded circuits, the technique using a traditional memory polynomial with low-rate
search for maximum RF output power by varying the parameters analog-to-digital device(ADC) is experimentally validated. The
successively is not a promising approach. With DoE the input NMSE and ACPR results indicate the same performance by using
parameter space is optimally sampled to maximize the gain of an ADC sampling from 100 MHz to 10 MHz.
information with a minimum of required measurement points. By
the analysis of variance (ANOVA) a multidimensional polynomial Development of a Highly Linear Ka-Band Power
fit of the measured data is stepwise optimized, which results in a Amplifier Using Second Harmonic Injection
lower standard deviation between model and measurement data
and higher predictability. Test measurements confirm the model
Linearization
of the DoE approach. Duy P. Nguyen, Thuy Nguyen, Anh-Vu Pham;
University of California at Davis, USA
EuMC43-4, Time: 12:20
EuMC43 : Power Amplifier Systems
Room 14, 11:20–13:00, Thursday 6th October 2016 We demonstrate the development of a highly linear Ka-band power
amplifier (PA) using second harmonic injection at the gate of a
Chair: Rüdiger Quay, Fraunhofer IAF
pseudomorphic high mobility electron transistor (pHEMT). The
Co-Chair: Andreas Wentzel, FBH
second harmonic injection PA (HI PA) achieves a measured gain
of 18.5 dB and P1dB of 23.5 dBm at 28.5 GHz. Compared to the
An 60W Average Power Wideband Amplifier with same PA without second harmonic injection, the HI PA has a 3.5
Envelope Tracking for DVB-T Applications dB higher in P1dB and a 12 dB improvement in the third-order
intermodulation distortion (IM3). To the best of our knowledge,
Daniel Maassen 1 , Lothar Schenk 2 , Martin Muessener 2 , our 2nd harmonic injection PA is the first demonstration of the
Peter Muehlbacher 2 , Uwe Dalisda 2 , Georg Boeck 1 ; technique at millimetre-wave frequencies.
1
Technische Universität Berlin, Germany; 2 Rohde &
Schwarz, Germany A New Modulator for Digital RF Power Amplifiers
EuMC43-1, Time: 11:20 Utilizing a Wave-Table Approach
In this paper, the development of a DVB-T power amplifier (PA) Florian Hühn, Andreas Wentzel, Wolfgang Heinrich;
with enhanced efficiency performance based on the envelope FBH, Germany
tracking method (ET) is described. The amplifier works in the
EuMC43-5, Time: 12:40
ultrahigh frequency (UHF) band from 470 to 803 MHz. The PA
consists of two coupled push-pull stages of laterally diffused metal This work presents for the first time a wave-table based coding
oxide semiconductors (LDMOS) that are combined and equipped scheme to generate a high speed binary input signal for digital
with a multilevel Supply Modulator to achieve a drain modulation. RF power amplifiers. The approach maximizes the utilization
The results indicate an improved drain efficiency within 14.6% of the time domain handling capabilities of the pulse forming
up to η ≥ 42% for a 8MHz coded orthogonal frequency division circuit. Key features are a greatly improved output spectrum
multiplexing (COFDM) — signal with 9 dB peak-to-average power purity in comparison to common digital modulators, the ability
ratio (PAPR) including the losses of the Supply Modulator. While to adjust the modulator to any given pulse forming hardware and
fulfilling the spectrum mask, the output power is higher than 60 W a built-in signal correction option that comes without additional
(470 W peak) for the frequency range from 470 – 803 MHz. computational cost. The proposed concept is emulated with an
arbitrary waveform generator and shows for a 5MHz WCDMA
signal (6.5 dB PAPR) at 900MHz an EVM of 0.9% and better than
>55 dB ACLR. To the authors’ knowledge these are the best values
achieved for a single-bit coding scheme without digital predistor-
tion (DPD) reported so far that still maintains maximum power
coding efficiency.
35
EuMC 2016 4–6 October 2016 London, UK
36
EuMC 2016 4–6 October 2016 London, UK
A K/Ka Band Radiating Element for Tx/Rx Phased all-pass mode and the bandstop filter mode, which is a capability
Array that is not commonly available in conventional multi-path-type
switched filter approaches. A 4-pole prototype switchable notch
A.I. Sandhu 1 , E. Arnieri 2 , G. Amendola 2 , L. Boccia 2 , E. filter centered at 1090 MHz with 14 MHz 30-dB bandwidth was
Meniconi 3 , Volker Ziegler 4 ; 1 KAUST, Saudi Arabia; fabricated and measured for demonstration.
2
Università della Calabria, Italy; 3 Qorvo, Germany;
4
Airbus Group Innovations, Germany A Low-Loss Compact Stripline Low-Pass Filter for
EuMC45-3, Time: 12:00 Millimeter-Wave Applications
The paper presents a K/Ka band radiating element for TX/RX A. Gomez-Torrent 1 , I. Arregui 1 , J.D. Martinez 2 , F.
phased arrays. Dual band operations is obtained using a single Teberio 1 , J.V.M. Sanchez de Rojas 2 , Vicente E. Boria 2 ,
radiating surface: a novel radiator is adopted and placed in a
M.A.G. Laso 1 ; 1 Universidad Pública de Navarra, Spain;
configuration in which dual band and single band elements are 2
interleaved. The array elements are optimized to scan the beam in Universidad Politécnica de Valencia, Spain
excess of 50◦ in both bands. A subarray with 49 Rx elements and EuMC46-2, Time: 14:40
105 Tx elements was built and measured confirming the results In this work, a low-loss compact stripline low-pass-filter for
obtained in simulations. millimeter-wave applications is to be presented. The proposed
filter, with a pass-band from 26.5 GHz to 40 GHz and 55 dB of
New Agile EBG Matrix Antenna for Space rejection up to 65 GHz, shows an improved performance over the
Applications classical alternative (a stepped-impedance filter). The filter has
been fabricated in LTCC technology and the effects of the fabri-
Ali Siblini 1 , Hussein Abou Taam 2 , Bernard Jecko 1 , cation errors have been studied with a sensitivity analysis. The
Mohamed Rammal 2 , Anthony Bellion 3 ; 1 XLIM, France; study shows that the proposed filter is more robust to these errors
2
Lebanese University, Lebanon; 3 CNES, France which, together with the reduced size, makes it more suitable for
EuMC45-4, Time: 12:20 later integration in a high-frequency system.
This paper presents a new agile matrix antenna specialized for cir-
cularly polarized space applications. The design of the proposed
Novel Miniature Slow-Wave Resonator Filter Using
antenna matrix is based on elementary pixel which generates Multilayer LCP Circuit Technology
circularly polarized field. The concept of the pixel is briefly Zhou Zhou 1 , Jiasheng Hong 1 , Petronilo Martin
demonstrated as a patent and verified with several fabrications in
antenna arrays for linear polarization beam forming and steering. Iglesias 2 ; 1 Heriot-Watt University, UK; 2 ESA, The
The design will be used for several space applications with directive Netherlands
and wide angle beams. EuMC46-3, Time: 15:00
This paper presents a novel microwave bandpass filter using
Synthesis of a 2D Reconfigurable Parasitic Element microstrip slow-wave open-loop resonators and multilayer liquid
Antenna crystal polymer (LCP) technologies. The new filter has not only
very compact size due to the slow-wave effect, but also exhibits
C. Menudier 1 , M. Thevenot 1 , E. Arnaud 1 , A. Oueslati 1 , a ultra-wider upper stopband resulting from the dispersion prop-
F. Fezai 1 , T. Monediere 1 , N. Chevalier 2 , S. Reynaud 2 ; erty. A five-pole microstrip filter of this type, i.e., a bandpass
1
XLIM, France; 2 CISTEME, France filter centered at f c =1.18 GHz with -3dB fractional bandwidth of
EuMC45-5, Time: 12:40 17%, has been designed and fabricated. No spurious response,
which are at least 30-dB rejection, occurs for the frequency up to
This work presents the design of a low-cost concept of recon- 10GHz. Moreover, the fabricated filter also has the compact size
figurable antenna used as a test vehicle. It is based on parasitic of 0.102λg × 0.081λg and the light weight less than one gram by
elements to simplify the feed distribution network of reconfig- using multilayer LCP circuit technology. Good agreement can be
urable antenna. The synthesis of this antenna consists of the observed between the simulation and measurement.
stimulation of couplings to maximize the directivity in one or
several given directions. A constraint on the antenna matching is Continuously-Tunable-Bandwidth Acoustic-Wave
also set to avoid the addition of a dedicated circuit on the driven
element. A prototype with 49 elements working at 2.45GHz has Resonator-Based Bandstop Filters and their
been manufactured and measured. The results present a very good Multi-Mode Modeling
agreement. The originality of this work is based on the important
Dimitra Psychogiou 1 , Roberto Gómez-García 2 ,
number of parasitic elements and on the reactive loads connected
to them. These loads are synthesized to satisfy both the radiation Dimitrios Peroulis 1 ; 1 Purdue University, USA;
2
objective and the matching constraint. Universidad de Alcalá, Spain
EuMC46-4, Time: 15:20
This paper reports on high-quality-factor (Q) acoustic-wave
EuMC46 : New Technologies for Filter resonator (AWR)-based bandstop filters (BSFs) with continuously-
Realization variable stopband bandwidth (BW). They are based on mixed-
Room 12, 14:20–16:00, Thursday 6th October 2016 technology resonant branches that are shaped by one acoustic-
Chair: Richard Snyder, RS Microwave wave-lumped-element resonator (AWLR) and two lumped-element
Co-Chair: Vicente Boria, Universidad Politécnica de Valencia (LE) impedance inverters that are in-parallel cascaded to an all-
pass-type network. Despite the use of AWRs, transfer functions
with fractional bandwidths (FBWs) that are wider than the elec-
Low-Loss Self-Switching Bandstop Filter tromechanical coupling coefficient (k2t ) of the AWRs can be created
Sanghoon Shin, Andrew C. Guyette, Eric J. Naglich; and controlled through the integration of variable LE capacitors
NRL, USA that preserve the AWR’s high-Q characteristics. A coupling-
matrix-based design approach that facilitates the prediction of
EuMC46-1, Time: 14:20
high- and low-frequency spurious modes — typically present in
A new switchable low-loss bandstop filter is presented based on an a realistic AWR filter response — already at the synthesis level is
indirect switching method combined with all-pass coupled lines. presented for the first time for AWR-based BSFs. An experimental
The proposed design allows switching between an all-pass mode BSF prototype constructed with commercially-available surface
and a bandstop filter mode for On/Off operation of a bandstop acoustic wave (SAW) resonators was built and tested at 418 MHz
response. Due to the location of the switch, which is outside of the for proof-of-concept purposes. It exhibits tunable BW between
through line, the passband insertion loss is drastically improved 0.18–0.71 MHz (0.55–2.2k2t , passband insertion loss (IL) between
with this new method compared with a conventional switchable 0.55–2 dB and maximum stopband attenuation between 25–40 dB
bandstop filter configuration. In addition, the method provides (i.e., Q>8,000).
consistent group delay throughout the passband in both the
37
EuMC 2016 4–6 October 2016 London, UK
Synthesis and Design of Suspended Substrate A New Haemostatic Device Utilising a Novel
Stripline Filters for Digital Microwave Power Transmission Structure for Delivery of Adrenaline
Amplifiers and Microwave Energy at 5.8GHz
Monica Martinez Mendoza 1 , Andreas Wentzel 1 , Shaun Preston 1 , Malcolm White 2 , Brian Saunders 3 ,
Muhammad Sandhu 2 , Alejandro Alvarez-Melcon 3 , Zacharias Tsiamoulos 3 , Christopher P. Hancock 1 ;
Wolfgang Heinrich 1 , Ian C. Hunter 2 ; 1 FBH, Germany; 1
Bangor University, UK; 2 Creo Medical, UK; 3 St. Marks
2
University of Leeds, UK; 3 Universidad Politécnica de Hospital, UK
Cartagena, Spain EuMC47-3, Time: 15:00
EuMC46-5, Time: 15:40 The design, development and testing of a microwave and adrenaline
In this paper, a synthesis method for suspended substrate stripline haemostat for use in endoscopic procedures is shown herein. A
filters for digital microwave power amplifier applications is pre- novel transmission line structure has been developed to facilitate
sented. The synthesis method combines a lumped element and the delivery of both adrenaline and microwave energy to achieve
full-wave mixed approach in a very efficient way. In order to haemostasis. A proximal end impedance transformer and radiative
achieve high amplifier efficiency the filter must exhibit a high input tip have been designed and manufactured to provide good match
impedance in the stopband. This has been implemented for the between the novel hollow transmission line and the microwave
first time by using a capacitively end coupled filter combined with source and tissue respectively. Microwave energy at 5.8GHz has
stepped impedance resonators. A third order filter was designed. been successfully delivered into porcine liver model providing a
Simulations show that the final stage drain efficiency of the power controlled and focused coagulation zone of approximately 5mm
amplifier and suppression of out-of-band frequency components which would be useful for plugging of bleeding vessels.
can be significantly improved when the new structure is used.
Manufacturing Technologies for UHF RFID
Epidermal Antennas
EuMC47 : Applicators and Sensors for S. Amendola 1 , A. Palombi 1 , L. Rousseau 2 , G.
Medical Applications Lissorgues 2 , G. Marrocco 1 ; 1 Università di Roma “Tor
Room 13, 14:20–16:00, Thursday 6th October 2016 Vergata”, Italy; 2 ESYCOM, France
Chair: Bart Nauwelaers, KU Leuven EuMC47-4, Time: 15:20
Co-Chair: Nutapong Somjit, University of Leeds
Skin-mounted electronics is the next wave beyond wearable devices
for unobtrusively picking up vital signs (temperature, hydration,
Cutting Human Tissue with Novel biopotentials . . .) over the body surface. The recent evolution of
Atmospheric-Pressure Microwave Plasma Jet UHF RFID technology towards epidermal sensing applications plays
Achim Stephan 1 , Holger Heuermann 1 , Michael a key role to provide stick on sensors with wireless powering and re-
mote reading. In this paper different state of the art manufacturing
Prantner 2 ; 1 FH Aachen, Germany; 2 BOWA-electronic, technologies (carved adhesive copper, microwires, inkjet printing
Germany with self-sintering Ag-ink and photolithography) are applied to the
EuMC47-1, Time: 14:20 fabrication a small size UHF RFID epidermal sensor suitable for
measurements of the surface body temperature. Performance of
In this paper a novel atmospheric-pressure microwave plasma jet is
the resulting prototypes are systematically compared in terms of
described for use as a microwave scalpel in surgery. The goal is to
achievable maximum gain, usability of bio-compatible conformable
cut human tissue with a minimum of collateral damage adjacent to
substrates, time and costs for large-scale production.
the cut. The microwave scalpel has several advantages compared to
current electro surgery, in particular that no potentially dangerous A Feasibility Study on Human Gait Monitoring Using
currents flow through the patient’s body. Experiments have shown
the ability of our plasma jet to cut human tissue with good cut a Wearable K-Band Radar
performance, which must be further optimized. Yao Tang 1 , Lixin Ran 2 , Changzhi Li 1 ; 1 Texas Tech
University, USA; 2 Zhejiang University, China
Development of a 70MHz Unit for Hyperthermia EuMC47-5, Time: 15:40
Treatment of Deep Seated Breast Tumors
Falling is a primary public problem which will cause serious in-
J. Crezee, G. van Tienhoven, M.W. Kolff, J. Sijbrands, G. juries, especially for senior people aged over 65. Therefore, various
van Stam, S. Oldenborg, E.D. Geijsen, M.C.C.M. Hulshof, fall detection systems are designed and developed. However, in
existing researches, very few researchers use wearable radio fre-
H.P. Kok; Academic Medical Center, The Netherlands
quency device to monitor the signature of human leg and detect fall
EuMC47-2, Time: 14:40 event. In this paper, a feasibility study of all-time gait monitoring
Hyperthermia of tumors in intact breast extending beyond the using wearable K-band Doppler radar is presented. In the experi-
heating depth of our superficial 434 MHz CFMA antennas requires ment, a radar sensor was mounted on the subject’s right ankle or
an alternative approach. A dedicated system was designed for this right knee to capture the Doppler frequency. Experiment results
purpose, consisting of a treatment bed fitted with a 50×40×16cm are compared to show different features of Doppler information
temperature controlled open water bolus. The patient lies in in different movements. Measurement results demonstrate the
prone position with the breast immersed in the water positioned feasibility of fall detection using wearable onboard radar system.
in front of a 34×20cm 70 MHz waveguide placed in the bottom of
the bolus. Hyperthermia was applied once a week for the whole
breast with the 70 MHz applicator for 6 patients treated with
EuMC48 : Energy Harvesting and Wireless
thermoradiotherapy for deep lesions of recurrent breast cancer Power Transfer
or melanoma. Two 14-sensor thermocouple thermometry probes Room 14, 14:20–16:00, Thursday 6th October 2016
were placed in catheters to monitor the invasive temperature. Chair: Alexandru Takacs, LAAS-CNRS
Results: The combination of 300–900W antenna power and a water Co-Chair: Shigeo Kawasaki, JAXA
temperature of 42◦ C was well tolerated for the entire session of
one hour and resulted in good tumor temperatures with T10 = Design of a Wide Dynamic Range Rectifier Array
42.2◦ C, T50 = 41.1◦ C, T90 = 39.8◦ C. No toxicity or complaints were
associated with the heating. A water mattress and other measures with an Adaptive Power Distribution Technique
were needed to assure a comfortable position throughout the Xiaoyu Wang, Omar Abdelatty, Amir Mortazawi;
treatment. Conclusion: the 70 MHz breast applicator system
University of Michigan, USA
performed well and tumor temperatures were good.
EuMC48-1, Time: 14:20
This paper presents the design of a wide dynamic range rectifier
array using a novel adaptive power distribution method. In such a
38
EuMC 2016 4–6 October 2016 London, UK
rectifier array, the RF input power is distributed among multiple A CMOS Full-Wave Rectifier with Threshold
rectifier devices adaptively, according to their impedances as a Compensation Based on Inherent Body-Voltage
function of input power level. Such a rectifier array can achieve Control
high rectification efficiency and low reflection coefficient over a
wide range of power levels. The method is experimentally verified Leandro Grasso 1 , Giuseppe Palmisano 1 , Ranieri
with a 900 MHz two-device rectifier array, and demonstrated an Guerra 2 ; 1 Università di Catania, Italy;
efficiency higher than 50% over 17 dB dynamic range (10 dB wider 2
STMicroelectronics, Italy
than a conventional rectifier design using the same devices) with a
EuMC48-5, Time: 15:40
peak efficiency of 66%.
An RF rectifier operating at 868 MHz is presented, which uses a
A Compact Size and High Efficiency CMOS-IPD threshold-voltage compensation based on an inherent control of
the body voltage. Indeed, the proposed solution enhances circuit
Rectenna Using 2.5D Wafer-Level Packing for a performance in terms of power conversion efficiency (PCE) and
Wireless Power Harvesting System sensitivity, by properly driving transistor bulks without additional
Kuei-Cheng Lin 1 , Po-Chang Wu 1 , Hann-Huei Tsai 1 , components. A 10-stage CMOS full-wave rectifier was implemented
in a 0.13-μm CMOS technology for a typical RF harvesting appli-
Ying-Zong Juang 1 , Chao-Shun Yang 2 , Guo-Wei cation. The circuit is capable of delivering 2.4 V and 1 μA to the
Huang 2 ; 1 NARLabs, Taiwan; 2 NDL, Taiwan output load, while achieving a PCE performance of 38% with an RF
EuMC48-2, Time: 14:40 input power as low as -22 dBm.
This work achieves a two-and-a-half-dimensional (2.5D) wafer-level
radio frequency (RF) energy harvesting rectenna module with a
compact size and high power conversion efficiency (PCE) that EuMC49 : Photonic Technologies for
integrates a 2.45 GHz antenna in an integrated passive device (IPD) Terahertz Systems Engineering
and a rectifier in a tsmc 0.18 μm CMOS process. The proposed Room 15, 14:20–16:00, Thursday 6th October 2016
rectifier provides a master-slave voltage doubling full-wave topol-
Chair: John Cunningham, University of Leeds
ogy which can reach relatively high PCE by means of a relatively Co-Chair: William J. Otter, Imperial College London
simple circuitry. The IPD antenna was stacked on top of the
CMOS rectifier. The rectenna (including an antenna and rectifier)
achieves an output voltage of 1.2 V and PCE of 47% when the Towards Optical Fiber Synthesis of Millimeter and
operation frequency is 2.45 GHz, with -12 dBm input power. The Submillimeter Waves
peak efficiency of the circuit is 83% with -4 dBm input power.
Ayman Hallal, Steve Bouhier, Simon Le Méhauté,
The die size of the RF harvesting module is less than 1 cm2 . The
performance of this module makes it possible to energy mobile François Bondu; IPR (UMR 6251), France
device and it is also very suitable for wearable and implantable EuMC49-1, Time: 14:20
wireless sensor networks (WSN). Towards an optical synthesis of low phase noise continuous
millimeter and submillimeter electrical waves in a compact and an
Cross Dipoles Rectenna for Microwave Applications all-fiber system, we present the all-electrical locking of the optical
A. Okba, S. Charlot, P-F Calmon, A. Takacs, H. Aubert; frequency of a distributed feedback laser (DFB) diode at 1549 nm
tunable over 4 nm, on a fibered Fabry-Perot cavity. We demonstrate
LAAS, France a 6 MHz servo bandwidth and a frequency noise suppression
√
EuMC48-3, Time: 15:00 down to 0.3 Hz/ Hz at 80 kHz carrier offset frequency in the
This paper addresses recent results obtained in the Ku band by error signal. Furthermore, we use a Brillouin fiber laser in order
using an innovative cross dipoles rectenna topology. The targeted to refine the stabilized laser linewidth and we√then demonstrate a
application is the harvesting of the spill-over losses of microwave frequency noise suppression down to 0.4 Hz/ Hz at 100 kHz off-
antennas for powering autonomous wireless sensors used for set frequency, limited by the phase noise floor of the measurement
satellite health monitoring. The experimental results demonstrate instrument.
that this compact antenna can provide at least 1 mW of DC power
when it is illuminated by an incident electric field of 38 V/m or Multi-Layered Stacked Patch-Antennas on
higher. Electro-Optic Material for Optical Modulation
Y.N. Wijayanto 1 , A. Kanno 1 , T. Kawanishi 1 , H.
Impact of Symbol Rate and Roll-Off Factor on
Murata 2 , T. Umezawa 1 , N. Yamamoto 1 , Y.
Rectifier RF-DC Conversion Efficiency for WiCoPT
Okamura 2 ; 1 NICT, Japan; 2 Osaka University, Japan
System
EuMC49-2, Time: 14:40
Hitoshi Shimamura 1 , Ryuya Tanaka 1 , Hiroto Sakaki 2 , Multi-layered stacked patch-antennas on an electro-optic (EO) ma-
Satoshi Yoshida 1 , Kenjiro Nishikawa 1 , Shigeo terial are proposed for optical modulation. By using multi-layered
Kawasaki 3 ; 1 Kagoshima University, Japan; 2 Mitsubishi structures, larger antenna gain can be obtained to induce stronger
Electric, Japan; 3 JAXA, Japan millimeter-wave electric fields. The induced millimeter-wave elec-
tric field can be used for optical modulation through the Pockels
EuMC48-4, Time: 15:20
effects of the EO crystal. Since the antenna gain is enhanced by
Wireless Communication and Power Transmission (WiCoPT) is a using multi-layered stacked patch-antennas, the modulation index
technology that enables to transfer data and power simultaneously. improvement can be obtained.
This paper analyzes and clarifies the impact of input modulated
signals on the RF-DC power conversion behavior of the rectifier. Improvements on Broadband Signals in Radio Over
The RF-DC power conversion efficiency (PCE) was characterized
by input power, symbol rate, and roll-off factor of the modulated
Fiber Systems by Mode Filtering
input signal. On the low symbol rate signal, the impact of the peak Tamás Cseh 1 , Gábor Fekete 1 , Tibor Berceli 1 , Eszter
to average power ratio (PAPR) value on the PCE is low, while the Udvary 1 , Ali Kabalan 2 , Wosen Kassa 2 , Carlos Viana 2 ,
impact of PAPR value on the PCE is high on the high symbol rate
signal. In addition, the optimal combination of the symbol rate Anne-Laure Billabert 2 , Salim Faci 2 , Jean-Luc Polleux 2 ,
and the roll-off factor greatly improves the RF-DC PCE. Finally, the Catherine Algani 2 ; 1 BME, Hungary; 2 ESYCOM, France
paper proposes the channel bandwidth as an index of the PCE. EuMC49-3, Time: 15:00
In this paper, we focus on the study of large bandwidth wireless
signal transmission following a 60 GHz standard over a multimode
fiber link used to cover optical distribution for the last mile. To
reduce the multimode effects within the fiber, a single mode fiber
is first added to play a role of mode filter, and then replaced by
a Mandrel as a filter. Error vector magnitude (EVM) is used as
39
EuMC 2016 4–6 October 2016 London, UK
a metrics to analyze the signal degradation. Simulation results is the wideband to narrowband frequency reconfigurable antenna,
are confirmed by measurements. The EVM of the RoF links on planar monopole contribute to the wideband characteristic while a
single mode fiber, multimode fiber with and without filtering are slot antenna is for narrowband. The third configuration used tun-
compared. able electromagnetic band-gap (EBG) to configure the band notched
frequency. The designed structures simulated performances and
Delay-Line Optoelectronic Oscillator with All-Optical analysis are discussed in this paper. The analysis is also focused
Gain on the performance of the diode as a switch to reconfigure the
frequencies.
K. Mikitchuk, A. Chizh, S. Malyshev; NASB, Belarus
EuMC49-4, Time: 15:20 Micromachined Switches and Phase Shifters for
In this paper, we present both theoretical and experimental anal- Transmit/Receive Module Applications
ysis of delay-line all-optical gain optoelectronic oscillator. The
Shiban K. Koul 1 , Sukomal Dey 1 , Ajay K. Poddar 2 ,
experimental study of oscillation amplitude, oscillation power time
stability, and spectrum is provided. Double Rayleigh scattering in Ulrich L. Rohde 2 ; 1 IIT Delhi, India; 2 Synergy
the optical fiber and signal-spontaneous beating noise of erbium- Microwave, USA
doped fiber amplifier, and dynamical instabilities are investigated EuMC50-3, Time: 15:00
numerically.
This work presents micro-electromechanical system (MEMS) based
Quantum Mechanical Analysis of a THz Graphene switches and phase shifters for transmit/receive module appli-
cations. All designs are implemented using coplanar waveguide
Travelling Wave Amplifier (CPW) transmission line and fabricated on 635-μm alumina sub-
Naimeh Ghafarian, Amir Hamed Majedi, Safieddin strate using surface micromachining process. Different switching
Safavi-Naeini; University of Waterloo, Canada networks like series/shunt configuration, single-pole-double-throw
(SPDT), single-pole-four-throw (SP4T), SP8T, SP9T and SP12T are
EuMC49-5, Time: 15:40
presented for application in multi-bit digital phase shifters. One
In this paper, the possibility of travelling wave amplification in configuration of the 5-bit phase shifter demonstrates an average
graphene at the THz range of frequency is explored using a quan- insertion loss of 2.65 dB in the 16.75–17.25 GHz band with a return
tum mechanical model. Graphene as a zero overlap semi-metal can loss better than 22 dB and average phase error less than 0.68◦ at
be easily doped electrically. Due to high mobility of electrons and 17 GHz. Total area of the fabricated 5-bit phase shifter is 13 mm2 .
holes in graphene, high drift velocities can be induced by applying
a DC voltage across the graphene sheet. In this paper, the inter-
action between the EM wave and carriers in graphene is analysed.
EuMCPoster01 : EuMC Poster Session 1
The linear response theory is applied to find the induced current Exhibition Hall, 13:00–14:20, Tuesday 4th October 2016
and conductivity in the presence of an incident electromagnetic Chair: Rob Sloan, University of Manchester
wave. The results show that the negative conductivity and in turn
electromagnetic amplification in microwave and THz frequencies Compact Single-Band Planar Crossover Based on
can be obtained for drift velocities slightly greater than the phase
Coupled Lines
velocity at room temperature. With this property, graphene can be
used in future solid state travelling wave amplifiers instead of its Wenjie Feng, Tianyu Zhang, Wenquan Che; NUST,
semiconductor counterparts. China
EuMCPoster01-1, Time: 12:30
EuMC50 : APMC Selected Papers A compact single-band planar crossover based on coupled lines
Room 16, 14:20–16:00, Thursday 6th October 2016 loaded with open stubs is proposed in this paper. Two conven-
Chair: Stepan Lucyszyn, Imperial College London tional coupled lines loaded with different electrical wavelength
Co-Chair: Roberto Sorrentino, University of Perugia open stubs are used to realize the single passband. The center
frequencies of the planar crossover can be adjusted over a wide
Broadband Doherty Power Amplifier and frequency band by changing the even/odd-mode characteristic
impedance of the coupled lines and the characteristic impedance
Linearization of the open stubs. A compact planar single-band crossover located
Wenhua Chen, Xiaofan Chen, Zonghao Wang; at 1.78 GHz is designed and fabricated for verification. The
Tsinghua University, China theoretical and measured results are in good agreement and show
good in-band performances.
EuMC50-1, Time: 14:20
This paper will review the recent progress in broadband Doherty 90◦ Broadband Asymmetrical Open-Short-Stub
power amplifier (PA) and low feedback sampling rate digital predis-
tortion (DPD) techniques. Continuous mode impedance matching
Phase Shifter with Inductance Compensation
method is proposed for Doherty PA for bandwidth enhancement, Muh-Dey Wei, Peco Gjurovski, Renato Negra; RWTH
which utilizes the cross-matching technique to realize the physical Aachen University, Germany
output matching network. Owing to the compressive sensing
EuMCPoster01-2, Time: 12:30
method, the behavioral model can be extracted by using the
aliased feedback signal, the broadband PA nonlinearity can be well A 90◦ broadband asymmetrical open-short-stub phase shifter
corrected by the estimated output, and the feedback sampling rate (PS) using inductance compensation is demonstrated. A typical
can be reduced drastically. stub-load PS uses the same characteristic impedances of the stubs.
In this paper, the asymmetrical open-short stubs are proposed
Frequency Reconfigurable Antenna for Future to improve the fractional bandwidth (FBW). Furthermore, the
Wireless Communication System inductance of the via of the short stub is deliberately adopted to
compensate the asymmetrical impedance. Measurement shows a
M.K.A. Rahim 1 , M.R. Hamid 1 , N.A. Samsuri 1 , N.A. FBW of 90.4% for a phase difference of 90◦ ± 5◦ while S11 is below
Murad 1 , M.F.M. Yusoff 1 , H.A. Majid 2 ; 1 Universiti -10 dB. The proposed phase shifter is fabricated on a low-cost 1
Teknologi Malaysia, Malaysia; 2 Universiti Tun Hussein mm-FR4 substrate.
Onn Malaysia, Malaysia Resonant Properties of Mismatched Ring Circuits
EuMC50-2, Time: 14:40
Sebastian Raabe, Carsten Monka, Sebastian Franke,
Frequency reconfigurable antennas gain interest especially in
future wireless communication systems due to flexibility in many Reinhard Caspary, Joerg Schoebel; Technische
applications. This paper reviews three different configurations of Universität Braunschweig, Germany
frequency reconfigurable antenna. The first configuration is the EuMCPoster01-3, Time: 12:30
narrowband to narrowband frequency reconfigurable using slot
In this paper, we derive a novel condition for single-resonance
type of antenna and microstrip antenna. The second configuration
operation of microwave travelling-wave ring resonators which in
40
EuMC 2016 4–6 October 2016 London, UK
contrast to the published condition derived from S 11 is valid for Ferroelectric Varactor on Diamond Substrate for
the ring’s field multiplication factor M = S 31 . Unlike analyses High Power Microwave Applications
available in literature, the analysis shown in this paper employs
signal flow graphs, which is more flexible and allows to account for
A. Tumarkin, A. Altynnikov, A. Mikhailov, R. Platonov,
discontinuities with spatial expansion. Andrey Kozyrev, S. Razumov, A. Gagarin, I. Kotelnikov;
St. Petersburg Electrotechnical University, Russia
Ultra Broadband Planar Transmission Line EuMCPoster01-7, Time: 12:30
Transformers with Ferrite Based Bandwidth Ferroelectric planar varactor with barium strontium titanate (BSTO)
Extension film on diamond substrate was fabricated by RF magnetron sput-
tering and investigated at microwaves (MW). The measurements
Zihui Zhang, Georg Boeck; Technische Universität at frequency 3 GHz and different levels of MW power (up to P ∼
Berlin, Germany 10 var) was performed for varactors based on diamond and Al2 O3
EuMCPoster01-4, Time: 12:30 substrates for comparison. A significant difference in thermal
This work describes the design and implementation of broadband response under MW power of the varactors investigated was
broadside coupled impedance transformers with and without demonstrated: the overheating of FE film was observed as ΔT ∼
ferrite cores. Both transformers have the same dimensions, but (20–30) K on Al2 O3 and ΔT ∼ 2 K on diamond at maximum MW
in one of both two nanocrystalline cores around the broadside power.
coupled 25Ω transmission lines have been added. The cores have
Design of BST-on-Si Composite FBARs for
a very high permeability of 100000. The planar transformers are
fabricated with RO4003 PCB material. The version without core Switchable BAW Filter Application
has a VSWR at both ports of smaller than two and a insertion loss Milad Zolfagharloo Koohi, Seungku Lee, Amir
of lower than 1 dB over the whole bandwidth from 300MHz to 8
GHz. For the same VSWR and insertion loss specifications the core
Mortazawi; University of Michigan, USA
loaded transformer achieves a bandwidth of 1.5MHz to 8 GHz. A EuMCPoster01-8, Time: 12:30
very good agreement between simulation and measurement can be This paper presents optimal design of switchable BST-on-Si com-
observed. posite film bulk acoustic resonators (FBARs) for bulk acoustic
wave (BAW) filter applications. To design BAW filters with lower
Real-Valued Discrete-Time Impulse Response insertion losses and wider bandwidth, resonators’ Q×Kt 2 is
Representation of Bandpass S-Parameters maximized. Furthermore, lateral wave spurious resonances that
can significantly degrade the composite FBARs performance, are
Yudie Wang, Anding Zhu, Thomas J. Brazil; University eliminated by designing a frame at the border of ferroelectric-on-Si
College Dublin, Ireland FBARs. Using COMSOL simulations, a raised frame is designed at
EuMCPoster01-5, Time: 12:30 the border of BST-on-Si composite FBAR, which is dispersion type
I resonator. Designed structure has been validated by fabrication
Accurate and efficient time-domain simulation techniques for
and measurement and it is compared to typical composite FBAR
broadband microwave networks at system level are highly desir-
structures without frame.
able in modern computer-aided-design (CAD) tools, because of
advantages in terms of high simulation speed and the reduced Gain Improved Stacked Antenna Tuned Using
requirement for full circuit-level details of the simulated networks. Ferromagnetic Nanoparticles and Ferroelectrics
A method for accurate time-domain representation of bandpass
S-parameters is proposed in this paper, in order to produce fast Films
time-domain steady-state responses of broadband high-frequency Y. Malallah 1 , K. Alhassoon 1 , D. Venkatesh 1 , A.S.
linear, time-invariant systems. A real-valued discrete-time impulse
Daryoush 1 , C. Chinnasamy 2 , M. Marinescu 2 , H.
response (DTIR) representation is used in the proposed method.
As a result, the processes of down-conversion and up-conversion Gundel 3 ; 1 Drexel University, USA; 2 Electron Energy,
of input signals and system bandpass transfer functions normally USA; 3 IETR, France
required in bandpass analysis, can be effectively avoided. For EuMCPoster01-9, Time: 12:30
example, the method can be used in the design of distortion
High gain tunable annular ring antenna structure for WiFi band
cancellation circuits in full-duplex communication systems.
are reported by stacking passive elements over an active element
realized on a composite substrate of ferromagnetic nanoparti-
Compact Low Phase-Noise MEMS-Based RF Oscillator cles or ferroelectric thin films with FR4 baseline substrate. Low
on a Dedicated Silicon-Ceramic Composite Substrate coercivity material with high refraction index, low loss, and high
J. Stegner, M. Fischer, S. Gropp, D. Podoskin, U. Stehr, saturation moment are attractive in realization of tunable small
sized radio frequency (RF) circuits. The FeCo was characterized
Jens Müller, M. Hoffmann, Matthias A. Hein; to have permeability of more than 8 and loss tangent of less than
Technische Universität Ilmenau, Germany 0.1, while the BST have permittivity of more than 140 and loss
EuMCPoster01-6, Time: 12:30 tangent of less than 0.02. This paper addresses the use of Fe60 Co40
soft magnetic nanoparticles to realize high gain tunable stacked
Over the last few years, a unique silicon-ceramic composite sub-
antennas for WiFi band and a similar approach is extended to
strate technology has been developed, where a silicon wafer can
manganese-doped Ba0.8 Sr0.2 TiO3 (BST) soft ferroelectric thin films.
be directly bonded to a stack of low-temperature co-fired ceramic
A Finite Element Method (FEM) computational method is used for
layers. With this approach, a composite substrate is constructed
design and performance optimization of composite antennas with
which combines the advantages of two versatile materials for
superstrates to achieve frequency tuning and an improved gain.
the design of integrated RF modules: the superior electrical
The designed FeCo antenna demonstrates 5% frequency tuning per
performance of low-temperature co-fired ceramic technology for
0.1T of applied DC magnetic field and realized gain of 3dBi. The
the realisation of three-dimensional passive RF and microwave
simulated performance of BST based antenna is a frequency tuning
circuitry, and the unique possibilities for the integration of mi-
of 1.6% and expected gain of 5dBi using a 40kV/mm electric field.
croelectromechanical systems on the silicon wafer. Additionally,
it is feasible to fabricate CMOS integrated circuits directly on RF Solderless Vertical Interconnection for 3D
the silicon wafer. Within this work, the powerful concept of the
silicon-ceramic composite substrate is explained and illustrated in Module Integration
terms of a compact MEMS resonator-based RF oscillator module. Andrea Bentini, Giovanni De Santis, Marco Bartocci;
Elettronica, Italy
EuMCPoster01-10, Time: 12:30
This contribution presents the design and fabrication of a RF
solderless vertical interconnection. The test vehicle exploits the
spring contact technology to interface two RF multilayer circuit
boards. Experimental results demonstrate the effectiveness of
41
EuMC 2016 4–6 October 2016 London, UK
such approach for the development of broadband (DC-18GHz) RF GSM and WCDMA. The circuit uses a current reuse shunt-shunt
interconnections for 3D module integration. feedback architecture with a feedforward path in order to improve
the input matching, gain and noise figure (NF) simultaneously. The
L-Band SiGe HBT Active Differential Equalizers with amplifier has been fabricated in standard 65nm CMOS technology
Variable Inclination and Position of the Positive or and operates under a 1.2 V supply voltage. The achievable peak
Negative Gain Slopes gain is 16 dB with a -3 dB bandwidth between 100 MHz and 5 GHz,
while the input matching provides a S 11 ≤ -9 dB between 100 MHz
Yasushi Itoh, Hiroaki Takagi; Shonan Institute of and 10 GHz. The noise figure is kept below 5 dB until the frequency
Technology, Japan of 9.5 GHz. The linearity of the amplifier gives an input P 1dB and
EuMCPoster01-11, Time: 12:30 IIP3 of -17 dBm and -6 dBm respectively. The power consumption
is only 6.3 mW. The area of the chip occupies only 0.1 mm2 with
L-band SiGe HBT active differential equalizers with variable incli- pads included.
nation and position of the positive or negative gain slopes have
been designed and fabricated for frequency and temperature com- Front-End MMICs for Broadband High Throughput
pensation of microwave and optical systems. The active equalizer Satellite Systems Utilizing V and Q-Band
employs dual-resonant RLC circuits in the series feedback path
of the differential amplifier for positive gain slopes or in the load David Neilson, Norman Chiang, Ronald Remba,
for negative gain slopes. The implemented active equalizers have James J. Sowers; SSL, USA
achieved positive gain slopes of +54 to +87dB/GHz across 0.2 to EuMCPoster01-15, Time: 12:30
0.6GHz as well as negative gain slopes of -55 to -95dB/GHz over
1.1 to 1.5GHz. The active differential equalizers presented in this To utilize the V and Q band spectrum for commercial satellite pay-
paper have an outstanding feature of providing variable inclination loads, high performance, space-qualified, millimeter-wave active
and position of the positive or negative gain slopes, which can devices are required. There are several critical issues associated
be easily adjusted to meet with various stringent requirements with designing and manufacturing space-qualified devices at these
for frequency and temperature compensation in microwave and frequencies. Specifically, the smaller feature sizes, larger circuit
optical systems. parasitics, and decreasing active device performance dictated by
higher frequencies make it difficult to produce parts that meet the
Broadband High Linearity IQ Modulator for Direct demanding requirements for these advanced payloads. Require-
Conversion Transmitters ments such as high linearity, low noise figure, and wide bandwidth
need to be optimized for V and Q band applications. Additionally,
Nir Yahav, Avner Efendowicz; Broadcom, Israel a path to space-qualification must be considered for these active
EuMCPoster01-12, Time: 12:30 devices. This paper will focus on the development of 0.1μm
pHEMT MMICs to meet the requirements for these challenging
This paper presents a novel modification to the Gilbert cell mixer
applications. Specifically those related to the front-end section
topology that increases linearity and it presents an approach for
of the transponder. MMIC qualification, design, performance,
designing a broadband high linearity up-conversion mixer that
and future developments will be discussed. Finally, validation of
includes an LO cancellation circuitry. A 12–20GHz IQ modulator
these MMIC designs is presented with measurements giving, to
that has been designed using the presented modifications was
the best of the author’s knowledge, the first reported performance
fabricated and measured. The IQ modulator exhibits an OIP3
for a fully integrated V-Band receiver unit designed for space
greater than 19dBm, OIP2 greater than 45dBm, and output 1dB
qualification.
compression of over 5dBm.
A Broadband Frequency Ramp Generator for Very Millimeter Wave Six-Port QPSK Modulators for High
Fast Network Analysis Based on a Fractional-N Data-Rate Wireless Communications
Phase Locked Loop B. Zouggari, C. Hannachi, E. Moldovan, S.O. Tatu;
Malte Mallach 1 , David-Benjamin Grys 1 , Thomas INRS-EMT, Canada
EuMCPoster01-16, Time: 12:30
Musch 1 , Robert Storch 2 ; 1 Ruhr-Universität Bochum,
In this paper, two direct V-Band and W-Band high data-rate QPSK
Germany; 2 KROHNE Innovation, Germany
modulators based on six-port technology are presented and an-
EuMCPoster01-13, Time: 12:30
alyzed. In order to evaluate the performances of the proposed
In this paper, we propose a frequency ramp generator for very fast modulators under realistic conditions, a six-port model based
network analysis in the frequency range from 0.4 GHz to 6 GHz. on the measured S-parameters of fabricated V-Band and W-Band
Highly linear analog frequency ramps are synthesized at high fre- circuits has been implemented in system simulations. The perfor-
quencies (8.4 GHz to 14 GHz), using a wideband voltage-controlled mances in terms of Bit Error Rate (BER) are analyzed for various
oscillator (VCO) stabilized by a fractional-N phase locked loop data-rates of a pseudorandom QPSK signal: 100 Mbps, 500 Mbps
(PLL), and are mixed down to the desired frequency band using a and 1 Gbps. The obtained results demonstrate an excellent BER
second PLL-stabilized VCO at a constant frequency of 14.4 GHz. for both considered frequency bands, over 10% bandwidth, which
In order to achieve a wideband PLL-stabilization, the loop gain perfectly meets the required specifications for future high-speed
variation is reduced by inserting a voltage dependent damping wireless communication systems.
network between the loop filter and the wideband VCO. This leads
to an almost constant transient and phase noise performance in the Graphical Approach to Analysis and Design of
complete frequency range. The overall phase noise at the output Gain-Boosted Near-f max Feedback Amplifiers
of the ramp generator is below -99 dBc/Hz at offset frequencies
above 10 kHz. The proposed ramp generator allows for fast and Shuhei Amakawa, Yuji Ito; Hiroshima University, Japan
accurate network analysis which is demonstrated by means of EuMCPoster01-17, Time: 12:30
measurements with a homodyne prototype system. The sweep It is a challenge to design amplifiers operating near the transistor
time of the system (0.5 ms) is significantly shorter compared to unity-power-gain frequency f max . This paper presents a graphical
previously published ramp based systems and commercial network chart (MAG-K chart) and associated analytic equations for analysis
analyzers, and allows monitoring of rapidly changing measurement and design of near-f max gain-boosted feedback amplifiers. The
scenarios. graphical approach provides an efficient means of finding feedback
networks that give the highest possible maximum available gain
Inductorless Wideband LNA with Improved Input
(MAG) for a given stability (K) at a target frequency. This is
Matching Using Feedforward Technique somewhat analogous to the Smith chart providing an intuitive
Pierre Bousseaud, Muhammad Abdullah Khan, Renato means of synthesising matching networks. Each of the designs
thus found can subsequently be checked for bandwidth and
Negra; RWTH Aachen University, Germany realisability. It is shown with simulated design examples that a
EuMCPoster01-14, Time: 12:30 better feedback network could be found that offers higher gain
This paper presents the design of an inductorless wideband LNA over a broader bandwidth than successful state-of-the-art designs.
for multistandard wireless applications including WiFi, Bluetooth, Feedback configurations taken up in the examples include not
42
EuMC 2016 4–6 October 2016 London, UK
only the simple shunt-shunt and series-series feedback, but also though transistor-based, a passive and reciprocal tuneable in-
more complex, tapped transformer feedback, which was recently ductive behaviour at its terminals over a broad range of biasing
successfully used in an InP millimetre-wave amplifier. conditions and frequencies. Thereby it accommodates more
degrees-of-freedom in circuit design and possibilities for interest-
Microwave Active Ring Resonator Based on ing applications, e.g., in integrated circuit design for a multitude
Spin-Wave Delay Line of relevant applications in sensing and mobile communications.
A test board was implemented and measured, confirming the
M.I. Martynov, A.A. Nikitin, A.B. Ustinov, B.A. Kalinikos; principle-of-operation in agreement with numerical simulations,
St. Petersburg Electrotechnical University, Russia demonstrating a transistor-based, passive, tuneable, nearly recip-
EuMCPoster01-18, Time: 12:30 rocal inductance over a frequency range larger than a decade.
The complex transmission coefficient of active ring resonators Tunable and Switchable Dual-Band BPF with
based on spin-wave delay lines was investigated both theoretically
and experimentally. Influence of the parameters of the delay line Reconfigurable Selectivity and Bandwidth Control
on the transmission coefficients was studied and analyzed. It was Nagendra Kumar, Yatendra Kumar Singh; IIT Patna,
shown that the resonant frequencies that define the bandpasses
India
of the ring resonator depend on the ferrite film thickness and
the distance between spin-wave antennae. These dependences EuMCPoster01-22, Time: 12:30
give possibility to reconfigure the transmission coefficient that in A tunable dual-band bandpass filter (BPF) with reconfigurable
combination with magnetic tuning provide flexibility for microwave selectivity and bandwidth control using varactor diodes has been
applications. presented in this paper. The proposed dual-band BPF consists of
two dual-mode microstrip resonators with centrally loaded stubs.
Design of Liquid Crystal Based Coplanar Waveguide It is shown that, the transmission zero (TZ) of a single dual-mode
Tunable Phase Shifter with No Floating Electrodes stub-loaded resonator can be tuned to lower or higher side of the
for 60–90GHz Applications passband. Using this property of the BPF, four different dual-band
responses have been achieved by tuning the transmission zeros
J.F. Li, H. Xu, D.P. Chu; University of Cambridge, UK of a particular passband. All four different responses are tunable.
EuMCPoster01-19, Time: 12:30 The proposed BPF also offers a bandwidth controllable property
while tuning of the passband. For the demonstration of the above
A continuously tunable millimeter wave (mm-wave) phase shifter
properties of the proposed design a dual-band BPF is designed and
for 60–90 GHz applications was proposed using a coplanar waveg-
fabricated. The first passband of the fabricated filter has a tuning
uide (CPW) structure without the use of a floating electrode (FE). In
range of 1.25 to 1.68 GHz. Also the second passband tunes from
contrast to conventional CPW-FE structures, the proposed FE-free
1.72 to 2.01 GHz.The first and second passband’s FBW varies from
CPW device can be modulated by the nematic liquid crystal (LC)
4.7% to 11.1% at 1.4 GHz and 3.6% to 6.2% at 1.90 GHz respectively.
materials confined in two symmetric feeding channels. The nearly
true-TEM nature of this CPW design enables wideband and low-loss Compact Harmonic Tuning Circuits for Class-F
operations, particularly in high frequencies up to 90 GHz. In
order to optimize between high tunability and low loss, the aspect Amplifiers Using Negative Order Resonance Modes
ratio of the CPW structure was optimized to maximize the defined of CRLH Stub Lines
Figure-of-Merit (FoM). By taking into account different loss mecha-
Shinichi Tanaka, Souta Koizumi, Kengo Saito; Shibaura
nisms in the designed structure and the effect of LC orientations,
the driving-voltage dependent impedance matching was examined Institute of Technology, Japan
to minimize the return and insertion losses. As an example, the EuMCPoster01-23, Time: 12:30
design of a phase shifter aimed to operate at 79 GHz with low Extremely compact harmonic tuning circuits for class-F amplifier
bias voltages (0–10 V) is presented, showing a wide phase shift are realized using composite right-/left-handed transmission line
range of 0–408◦ and a low insertion loss from -6.15dB to -4.56dB. (CRLH TL) stubs. The circuit takes up only a small fraction of the
The corresponding FoM is 66.3◦ /dB, which make it possible to amplifier circuit area and yet is capable of treating four harmonics
outperform over other LC-based phase shifters as reported within up to the fifth with a single stub or double stub configurations.
the targeted frequency range of 60–90 GHz. This has become possible by using the negative order resonance
modes of the CRLH TL, allowing for flexible and simultaneous
Impedance Tuner Using BST Varactors in control of many harmonics by tuning the dispersion curve of the
Alumina-Based IPD Technology stub line.
Ka Wai Wong, Raafat R. Mansour; University of
Joint Compensation of Modulator and Power
Waterloo, Canada
Amplifier Nonlinearities Based on a Complex-Valued
EuMCPoster01-20, Time: 12:30
Volterra Model
A compact, low loss and wide coverage impedance tuner using
alumina-based integrated passive device (AIPD) technology is pro- C. Crespo-Cadenas, M.J. Madero-Ayora, J.
posed. By integrating a tuning element- barium strontium titanate Reina-Tosina, J.A. Becerra-González; Universidad de
(BST) varactor, with high-Q AIPD L-C elements, an impedance tuner Sevilla, Spain
with wide impedance coverage range is achieved while maintaining
EuMCPoster01-24, Time: 12:30
low insertion losses. Details of the in-house AIPD fabrication pro-
cess are presented. Measured results for a continuous impedance This paper proposes a general Volterra model for complex-valued
tuner designed at 2.5 GHz are presented demonstrating a maxi- systems and shows its application to the joint compensation of
mum insertion loss of 1.2-dB impedance tuner from 2 – 3 GHz. The linear and nonlinear impairments of a wireless communications
overall footprint of the chip is only 3.8 mm × 1.88 mm. transmitter composed by an I/Q modulator followed by a power
amplifier (PA). The proposed structure, referred to as widely
Experimental Proof-of-Principle of a Passive, Nearly nonlinear (WNL) model, sets its roots in the systematic application
Reciprocal, Transistor-Based Tuneable RF of complex-valued signal processing techniques. The components
of the model structure are subsequently pruned through the use of
Inductance
a compressed-sensing algorithm that selects the active regressors
S. Loracher, K. Blau, U. Stehr, Ralf Stephan, Matthias A. from the full model. A digital predistorter (DPD) based on the
Hein; Technische Universität Ilmenau, Germany WNL model was applied to the joint mitigation of a transmitter
EuMCPoster01-21, Time: 12:30 composed by a commercial vector signal generator configured
with artificial impairments, followed by a preamplifier and the
An innovative approach for tuneable reactances using the example evaluation board of a GaN PA operating at 3.6 GHz. Measurement
of electronic inductances is introduced and the operation prin- results showed an improved performance for the proposed lin-
ciple affirmed by measurement. Hitherto solutions for variable earizer compared with a DPD based on the generalized memory
inductances often lack applicability in serial paths or do not polynomial model, both in terms of in-band and out-of-band
exhibit passive behaviour. The presented circuit shows, even metrics.
43
EuMC 2016 4–6 October 2016 London, UK
Output Harmonic Optimisation of Dynamically Load (RFPA). 5th Generation wireless standard (5G) is the next generation
Modulated Power Amplifiers standard for mobile telecommunications. In this paper we con-
sider a waveform obtained using Filter Bank Multi-carrier (FBMC)
Konstantinos Mimis 1 , Gavin T. Watkins 1 , Atsushi modulation, one of possible candidates for 5G, and investigate its
Yamaoka 2 , Keiichi Yamaguchi 2 ; 1 Toshiba Research impact with respect to RFPA behavioural modelling parameters.
Europe, UK; 2 Toshiba, Japan The measurement has been carried out using 30 MHz to 2000
EuMCPoster01-25, Time: 12:30 MHz, 25 W GaN wideband power amplifier. Measurement has also
been performed in the presence Orthogonal Frequency Division
In this work, efficiency improvements of dynamically load mod- Multiplexing (OFDM) RF signals at the input of the power amplifier.
ulated amplifiers through output harmonic manipulation are And the result is analysed in terms of crest factor, non-linear
explored. A probability density function (PDF) conscious design order, memory depth and Adjacent Channel Leakage Ratio (ACLR)
approach is proposed, according to which the harmonic output improvement.
terminations are optimised based on the PDF of the intended input
signal. The approach is investigated through load-pull measure- The Two-Tone Model for Power Amplifier Modeling
ments of two GaN HEMT devices (CGH40010 and CGH40025) at
900MHz with the second harmonic output termination optimised Telmo R. Cunha, Filipe M. Barradas, José C. Pedro;
for peak and back-off output power conditions. An improvement Universidade de Aveiro, Portugal
of average power added efficiency (PAE) by 2.0–5.6% is calculated EuMCPoster01-29, Time: 12:30
under various LTE DL signals simply by second harmonic termina-
This paper presents a novel methodology for power amplifier
tion optimisation.
(PA) behavioral model formulation. Instead of the conventional
Parallel Combination of High-Efficiency Amplifiers “postulate and test”, we start from the features that the model
should address, to build it in a constructive way. As an example, we
with Spurious Rejection for Concurrent Multiband formulate a model intended to represent the nonlinear dynamics
Operation excited by a two-tone excitation. Conceived in the frequency
Jun Enomoto, Haruka Nishizawa, Ryo Ishikawa, domain, the resulting time-domain model, the Two-Tone Model,
shows a very simple and flexible architecture and yet a very good
Yoichiro Takayama, Kazuhiko Honjo; University of modeling accuracy when tested against the standard Generalized
Electro-Communications, Japan Memory Polynomial (GMP) model.
EuMCPoster01-26, Time: 12:30
160W Peak Highly Linear Multilevel Outphasing
An efficient concurrent multiband power amplifier configuration
has been proposed for high-data-rate wireless communication Transmitter
systems. Single-band high-efficiency power amplifiers are designed Chi Thanh Nghe 1 , Daniel Maassen 1 , Georg Boeck 1 , J.
by adding spurious rejection functions which are embedded in
input and output fundamental-frequency matching circuits. And
Guan 2 , A. Aref 2 , Renato Negra 2 ; 1 Technische
those amplifiers are connected in parallel. In this configuration, Universität Berlin, Germany; 2 RWTH Aachen
significant merits exist in comparison with usual dual-band or University, Germany
broadband amplifiers, especially with regard to distortion charac- EuMCPoster01-30, Time: 12:30
teristics. To confirm this, a 4.5-/8.5-GHz-band GaN HEMT amplifier
This work presents a high power highly linear multilevel outphasing
was fabricated, and it exhibited maximum drain efficiencies of 64%
transmitter, which meets ACLR specifications for an LTE downlink
and 54% and maximum power added efficiencies of 61% and 41%
signal without the use of DPD. This is feasible, because up to 64
at 4.49 GHz and 8.42 GHz, respectively, on a concurrent operation
discrete output power levels can be used. These are needed to
with a highly suppressed near-band spurious level of less than -38
attain the required dynamic range for high peak-to-average-power
dBc.
signals. The three-stage GaN power amplifier (PA) line-up of each
A Hybrid 50-W GaN-HEMT Ku-Band Power Amplifier branch provides a gain of greater than 55 dB and overall PAE of 50%
at a peak output power of 120 W. Operated with four amplitude
Felix Rautschke 1 , Daniel Maassen 1 , Florian Ohnimus 2 , levels and an isolating power combiner, the transmitter employing
Lothar Schenk 2 , Uwe Dalisda 2 , Georg Boeck 1 ; two of these PAs delivers an ACLR of -41 dBc, whereas in a 64-level
1
Technische Universität Berlin, Germany; 2 Rohde & configuration the transmitter meets the standard with -46 dBc
for a 5 MHz downlink LTE signal. The average output power is
Schwarz, Germany
more than 25 W (160 W peak), while EVM is 2.81%. To the best of
EuMCPoster01-27, Time: 12:30
our knowledge, this is the highest power outphasing transmitter
In this paper the design, implementation, and experimental results reported in literature.
of a Ku-band 50W GaN-HEMT power amplifier (PA) for satellite
communication are presented. A 250nm bare-die device has Phase Control in Photonically Steered Phased Array
been chosen to achieve high saturated efficiency over the whole Transmitters by Optical Homodyne Detection
extended Ku-band uplink (13.75 – 14.5 GHz). The circuit was
realized in a hybrid microwave integrated circuit (MIC) technology Kevin Kolpatzeck, Lars Häring, Andreas Czylwik;
on an alumina substrate. The PA shows a measured performance Universität Duisburg-Essen, Germany
of more than 40W output power for a continuous wave (CW) signal EuMCPoster01-31, Time: 12:30
with a PAE higher than 21%. Modulated measurements (QPSK)
Photonic beamforming by shifting the optical phase of one of the
demonstrate an output power of more than 30W (50W peak) and
two local oscillators in a photomixing setup is a viable candidate
21% PAE, while holding the linearity requirements specified by
for beamforming in terahertz frequency transmitters due to its
Eutelsat.
seamless integration with terahertz generation by photomixing.
Comparison of Filter Bank Multi-Carrier and Compared to the more common true time delay approach photonic
beamforming is famous for, this concept has the advantage that the
Orthogonal Frequency-Division Multiplexing RFPA
optical phase shifters are standard telecom components realizable
Linearisation Requirement in a photonic integrated circuit and do not need to scale with RF
Kibrom N. Gebremicael 1 , Kevin Morris 1 , Souheil frequency. However, practical realization is problematic due to
the disproportionate optical path length sensitivity of the optical
Bensmida 1 , Mark Beach 1 , Stephen Wales 2 , Michalis phase and its susceptibility to thermal drift. In particular, the use
Kyriacou 3 ; 1 University of Bristol, UK; 2 Roke Manor of fiber-optic components is precluded without a means of phase
Research, UK; 3 University of York, UK control. While at microwave frequencies the phase difference
EuMCPoster01-28, Time: 12:30 between the antenna elements can be measured in the electrical
domain and potential phase errors can be fed back to the optical
Increased network capacity and transmission speed has driven phase shifter, this is not an option at terahertz frequencies. In this
the development of many different wireless standards. Radio paper, a concept will be presented for measuring the phases of the
Frequency (RF) Technology has also been improving with the antenna signals by optical homodyne detection, and using these
changing wireless standards. Such developments demand high measurements to control the optical phases appropriately.
linearity and power added efficiency from the RF Power Amplifier
44
EuMC 2016 4–6 October 2016 London, UK
Experimental Test of a W-Band Gyro-TWA for Cloud one and two-port VNA configurations, with special emphasis on
Radar Applications raw performance, dynamic range, and measurement stability.
The tethered NLTL reflectometers’ far reach and small form factor
W. He, C.R. Donaldson, L. Zhang, P. McElhinney, H. Yin, promise to reduce measurement complexity and enhance efficiency
J.R. Garner, K. Ronald, A.W. Cross, A.D.R. Phelps; in a variety of measurement scenarios.
University of Strathclyde, UK
EuMCPoster01-32, Time: 12:30 A Multi-Tone Load Pull Measurement System for
In this paper initial experimental results of a W-band gyrotron On-Wafer Characterization of Microwave Power
travelling wave amplifier (gyro-TWA) which is upgraded to operate Transistors
at a high pulse repetitive frequency of 2 kHz will be presented. The
gyro-TWA based on a helically corrugated interaction region and Sylvain Laurent 1 , Si Abed Karim Kahil 2 , Raymond
cusp electron beam source can output a maximum power of 5 kW at Quéré 1 , Jacques Sombrin 1 ; 1 XLIM, France; 2 United
its centre frequency of ∼94 GHz with an instantaneous frequency Monolithic Semiconductors, France
bandwidth of 10 GHz. The design, upgrade and performance of EuMCPoster01-37, Time: 12:30
the amplifier and its components will be presented.
A new Multi-Tone Load Pull (MTLP) measurement system has been
Novel Microwave Diode for Millimeter Waves on the developed and tested. This measurement system uses an Arbitrary
Waveform Generator (AWG) as the generator and a Large Signal
Base of Asymmetrically Doped Semiconductor
Network Analyzer (LSNA) as a receiver. Multi-Tone generation
Structure is realized in such a way that carrier (C) and Intermodulation (I)
Algirdas Sužiedėlis, Steponas Ašmontas, Jonas powers can be measured separately. The set-up is fully calibrated
on-wafer at all the frequencies of interest. The MTLP set-up is
Gradauskas, Viktoras Gružinskis, Andžej Lučun, configured to make measurements with Multi-Tone (MT) signals
Aurimas Čerškus; CPST, Lithuania up to eight frequencies and allows measuring simultaneously the
EuMCPoster01-33, Time: 12:30 MT output power, gain, Power Added Efficiency (PAE), Carrier to
Semiconductor structures with n+ -n junction are promising can- Intermodulation (C/I) ratio or Noise Power Ratio (NPR) in order to
didates for microwaves detection in millimeter and submillimeter derive the Error Vector Magnitude (EVM) induced by the device.
wavelengths region. Here we present experimental results of
microwave detection in Ka frequency range using semiconductor 120◦ Accesses CPW Transmission Lines for TRL
structure with asymmetric doping of n-type GaAs semiconductor Calibration Standards in a Band of 20–67GHz
at room temperature.
Arafat Ousman Bechir, Didier Vincent; Hubert Curien
Frequency Sensitive Effect of Rectifying FET (UMR 5516), France
Terahertz Detectors EuMCPoster01-38, Time: 12:30
A. Golenkov, F. Sizov, I. Lysiuk; NASU, Ukraine Measurements of CPW devices with orthogonal or bended accesses
EuMCPoster01-34, Time: 12:30 (120◦ in our case) after VNA calibration with conventional (straight)
set of standards may generate additional errors. Using 120◦ ac-
Performance limits of terahertz FET direct detection rectifying cesses transmission lines for calibration is more appropriate.
detectors operating in the broadband detection regime (long chan- The design and characterization of the first calibration standards
nel approximation) taking into account some extrinsic parasitic with 120◦ accesses are proposed. These standards will be used
and detector-antenna impedance matching are considered. It was for 2-port vector network analyzer TRL calibration. This work
demonstrate how to recognize radiation frequency by variation concerns S-parameter measurements of bended accesses of planar
FET gate voltage. devices in the range 20 GHz to 67 GHz.
Waveguide Modal Approximation Method for Plane
Robotic Flange System for Active Alignment of
Wave Incidence to Aperture Using Mode-Matching
Microwave, Millimetre-Wave and Terahertz
Method
Waveguides
Jihyeon Jang 1 , Changyul Cheon 1 , Young-seek
Yasamin Alkhorshid 1 , Ian D. Robertson 2 ; 1 Technische
Chung 2 ; 1 University of Seoul, Korea; 2 Kwangwoon
Universität Chemnitz, Germany; 2 University of Leeds,
University, Korea
UK
EuMCPoster01-35, Time: 12:30
EuMCPoster01-39, Time: 12:30
The shielding effectiveness of a rectangular enclosure with rectan-
This paper describes a computer vision based robotic waveguide
gular apertures is investigated using the mode-matching method.
flange alignment system that achieves improved repeatability of
With this method, the generalized scattering matrix and optimum
waveguide measurements. The proof-of-concept is demonstrated
topological method are utilized. In modeling the aperture pene-
using WR-62 in the frequency band 12.40 GHz to 18 GHz. An Ar-
tration, the waveguide modal approximation for an incident plane
duino board was used to interface a three-channel NTS NanoDirect
wave is proposed based on the mode-matching method. In this
XYZ positioner with MATLAB and its image acquisition toolbox.
method, the incident plane wave is replaced with the dominant
The measured results of a back-to-back adapter pair demonstrate
mode of the virtual rectangular waveguide. The electromagnetic
significantly improved repeatability with the automated system
fields of the virtual rectangular waveguide and the rectangular
compared with manual alignment. Through EM modelling of two
aperture are matched by using the mode-matching method. The
WR-1.0 rectangular waveguides over the frequency range 800
proposed method is verified by comparing to the results obtained
GHz to 1 THz it is shown that this new method for enhancing
by the CST simulation. It is shown that the proposed method
measurement repeatability will be invaluable.
can be applied to the arbitrary rectangular waveguides regardless
of the size, thickness, and orientation of the aperture and the
polarization and incidence angle of the incident wave. Agile and Compact Near-Field Analyses of Onboard
Bluetooth Module by Live Electrooptic Imaging
Reduced-Complexity E-Band VNAs with Tethered Masahiro Tsuchiya 1 , Takahiro Shiozawa 2 ; 1 NICT,
Far-Reaching Reflectometers Japan; 2 Kagawa College, Japan
K.M. Noujeim, T. Roberts; Anritsu, USA EuMCPoster01-40, Time: 12:30
EuMCPoster01-36, Time: 12:30 Potentially prompt and compact method for near-field analyses
Nonlinear-transmission-line (NLTL) technology enables compact, both in the real and wavenumber spaces have been applied suc-
millimeter-wave, vector-network-analyzer (VNA) architectures cessfully to RF emissions from a commercially available onboard
with enhanced performance and flexibility. To this end, recently Bluetooth module. The new method is based on real-time images of
developed E-band reflectometers are described and evaluated in near electric field, acquired and displayed by the live electrooptic
45
EuMC 2016 4–6 October 2016 London, UK
imaging technique in the asynchronous operation mode. Such Impact of Multisine Excitation Design on Rectifier
near-field features of the module have been clarified as precise Performance
location of emission origin, geometries of wave fronts, distribution
of wave-vectors, and angular dependence of emission power.
Mohammad Rajabi, Ning Pan, Sofie Pollin, Dominique
Schreurs; Katholieke Universiteit Leuven, Belgium
Frequency Detection Method with Transversal EuMCPoster01-45, Time: 12:30
Filters A detailed parametric study of the impact of multisine excitation
on a single-diode rectifier’s performance is performed. The aim
Ken’ichi Tajima, Morishige Hieda; Mitsubishi Electric, is to evaluate the pros and cons of single sine and multisine
Japan excitations regarding RF to DC conversion efficiency. For this
EuMCPoster01-41, Time: 12:30 purpose an experimental setup was prepared to fully control the
This paper presents a novel frequency detection method using characteristics of the multisine excitation, such as total power,
transversal filters to generate new intermediate signals that are bandwidth, number of tones and phase of each tone to have a
amplitude modulated in-phase and quadrature signals. By mutual fair comparison with single tone excitation. Our measurement
calculations using the intermediate signals, amplitude modulation study reveals an advantage of multisine excitations in the ultra-low
is cancelled out and a tangent signal includes phase of the input input power range (-30 dBm till -18 dBm). The observed reduced
signal can be obtained. Measurement results show good frequency performance under multisine excitation compared to single sine
detection error of 8.7e-4 to 3.2e-1 without the input filter, and excitation in the medium input power range (-16 dBm till -6 dBm),
2.0e-5 to 2.4e-3 with the input filter. 4 sampling time is required can be related to the circuit configuration and diode characteristics.
for a frequency detection without the input filter and 40 sampling The parameter Vth is experimentally found to critically describe
required with the input filter. the degradation of DC generation of the rectifier under multisine
excitation.
Permittivity Measurements and Associated
Uncertainties up to 110GHz in Circular-Disk EuMCPoster02 : EuMC Poster Session 2
Resonator Method Exhibition Hall, 13:00–14:20, Wednesday 5th October 2016
Yuto Kato, Masahiro Horibe; AIST, Japan Chair: Rob Sloan, University of Manchester
EuMCPoster01-42, Time: 12:30
We have measured the complex permittivity of plate samples and
Microstrip Diplexers with Dual-Mode Patch
evaluated those uncertainties up to 110 GHz by using a balanced- Resonant Junctions
type circular-disk resonator. By an electromagnetic excitation in Eugene A. Ogbodo, Yun Wu, Yi Wang; University of
the center from coaxial lines, only the TM0m0 modes are selectively
excited, so broadband measurements from 5 to 110 GHz can be Greenwich, UK
performed by a single resonator by utilizing higher order modes. EuMCPoster02-1, Time: 12:30
We have evaluated measurement uncertainties by rigorously con- A conventional diplexer is made up of two channel filters which are
sidering the uncertainty propagations of measured S-parameters connected to a transmission-line based signal distribution network.
and dimensions. The obtained results are compared with those In this work, a novel diplexer has been proposed and designed
obtained by the split-cylinder resonator method, and they agree using hairpin resonator filters that are joined together using a
rather well with each other within the ranges of uncertainties. patch resonator. The patch being a dual-mode is made to resonate
at the centre frequencies of the channel filters in corresponding
Power Maximization in a WPT Link Using Three modes. The patch functions as a signal splitter and at the same
Transmitters and a Single Receiver time as a resonant pole for each of the channel filters. A diplexer
with the channel centre frequencies of 3.99 GHz and 4.39 GHz
Giuseppina Monti 1 , Alessandra Costanzo 2 , Franco and 4% fractional bandwidth has been designed and tested. The
Mastri 2 , Mauro Mongiardo 3 , Luciano Tarricone 1 ; simulated and measured results show very good agreements.
1
Università del Salento, Italy; 2 Università di Bologna,
Italy; 3 Università di Perugia, Italy Dual Band Filter with Quad-Mode Stripline Resonator
EuMCPoster01-43, Time: 12:30 Masaya Tamura, Kento Ichinose; Toyohashi University
In this paper the problem of maximizing the power delivered to the of Technology, Japan
load in a wireless power transmission link with three transmitters EuMCPoster02-2, Time: 12:30
and a single receiver is theoretically solved. The case of four
This paper presents a quad-mode resonator with a square patch
magnetically coupled resonators is considered and analytical
and via holes, which connects to the upper and lower ground
formulas for the optimum load are derived and validated by circuit
planes through the via holes. This resonator has four fundamental
simulations.
modes, incorporating three transmission resonance modes and
one quasi-lumped component resonance mode. The resonant
Open-Loop Maximum Efficiency Tracking Wireless frequencies of these modes can be shown to be easily handled by
Power Transfer System for Biomedical Implants an increase and decrease in the number of via holes connected to
Seung-Tae Khang, Soo-Chang Chae, Tae-Dong Yeo, the square patch and the ground. Furthermore, the dual band filter
in the size of 5.0mm × 5.0mm × 1.5mm is designed by a single
Jong-Won Yu; KAIST, Korea resonator and demonstrated.
EuMCPoster01-44, Time: 12:30
An open-loop maximum efficiency tracking wireless power transfer Microstrip Wideband Diplexer with Narrow Guard
system using a magnetic resonance coupling for implantable Band Based on All-Resonator Structures
biosensors is proposed. The proposed wireless power transfer
system provides the stable power regardless of the variation of the Yun Wu, Yi Wang, Eugene A. Ogbodo; University of
operating distance between the transmitting and receiving anten- Greenwich, UK
nas. According to the adaptive impedance matching algorithms EuMCPoster02-3, Time: 12:30
with the minimum reflected power conditions, the proposed sys-
This paper presents a wideband microstrip diplexer with adja-
tem achieves the improved power transfer efficiency of maximum
cent channels based on an all-resonator structure. The diplexer
45% within the operating distance.
demonstrates an overall bandwidth of 23.7% between 1.71 GHz
and 2.17 GHz and a narrow guard band of only 40 MHz. Two
trisection resonator structures are introduced to generate asym-
metric transmission zeros to increase isolation between the two
channels. The coupling matrix for the all-resonator diplexer is
acquired. The diplexer is designed and fabricated on a Rogers
RO4003C substrate. The measured results show insertion losses
46
EuMC 2016 4–6 October 2016 London, UK
of 1.31 dB and 1.2 dB in the two channels, and an isolation of over insertion loss of 0.47dB in the pass band is introduced. This
28 dB. These results are in good agreement with the simulation. technique provides a transmission zero at the upper transition
band.
Multi-Coupled Resonator Microwave Diplexer with
Ultra Broadband Non-Planar DC-67–100GHz
High Isolation
Contiguous Diplexer Implemented on Organic
Augustine O. Nwajana, Kenneth S.K. Yeo; University of Liquid Crystal Polymer (LCP)
East London, UK
Irfan Ashiq, A.P.S. Khanna; National Instruments, USA
EuMCPoster02-4, Time: 12:30
EuMCPoster02-8, Time: 12:30
A microwave diplexer achieved by coupling a dual-band band-
This work describes an ultra-wideband low loss contiguous
pass filter onto two single-bands (transmit, Tx and receive, Rx)
diplexer with steep band selectivity. By combining planar Sus-
bandpass filters is presented. This design eliminates the need for
pended Stripline (SSL) and waveguide filter enhanced performance
employing external junctions in diplexer design, as opposed to the
in terms of frequencies, cross over loss and bandwidth is reported
conventional design approach which requires separate junctions
up to 100 GHz for the first time [1]. The diplexer is comprised of
for energy distribution. A 10-pole (10th order) diplexer has been
an input circuit configured to receive a broadband signal, a planar
successfully designed, simulated, fabricated and measured. The
low-pass filter, and a waveguide high-pass filter with cross-over at
diplexer is composed of 2 poles from the dual-band filter, 4
67 GHz. The low-pass filter (LPF) is implemented using a planar
poles from the Tx bandpass filter, and the remaining 4 poles
transmission line. The high-pass filter (HPF) is implemented using
from the Rx bandpass filter. The design was implemented using
a waveguide and is connected to the LPF using a SSL to waveguide
asynchronously tuned microstrip square open-loop resonators.
transition.
The simulation and measurement results show that an isolation
of 50 dB is achieved between the diplexer Tx and Rx bands. The X-, K- and Q-Band Matched Loads Based on
minimum insertion loss is 2.88 dB for the transmit band, and 2.95
Microwave Photonic Crystals
dB for the receive band.
D.A. Usanov 1 , A.V. Skripal 1 , D.V. Ponomarev 1 , V.P.
Balanced Bandpass Filter with Intrinsic Common Meshanov 2 , N.F. Popova 2 , M.K. Merdanov 3 ; 1 Saratov
Mode Suppression Using Slot Coupled Lines and State University, Russia; 2 Nika-Microwave, Russia;
Microstrip Loading Lines 3
Electronic Engineering, Russia
Yang-Chih Huang, Chin-Yi Lin, Tzong-Lin Wu; National EuMCPoster02-9, Time: 12:30
Taiwan University, Taiwan The possibility to create small size broadband microwave matched
EuMCPoster02-5, Time: 12:30 loads on microwave photonic crystals, consisting of alternating
nanometer metal layers with different thickness and conductivity
In this paper, a novel balanced filter based on slot coupled lines
and composite materials based on dielectric matrixes with the filler
with microstrip loading lines are proposed. The filter can intrinsi-
in the form of air inclusions, has been theoretically demonstrated
cally suppress the common mode noise without specially designed.
and experimentally justified.
Besides, this kind of filter can achieve much smaller bandwidth
than other slot-line-based filter, which is more popular in the Design of Near-Field Beam-Splitting Frequency
practical application. On the other hand, due to the loading lines
near the slot coupled line, the length of the slot line can be reduced
Selective Surfaces for Fabry-Perot Cavity Antenna
compared to the previous design, which can further reduce the Systems
area. The demonstration filter with central at 2.73 GHz and 36%
Chanjoon Lee, Robert Sainati, Rhonda Franklin;
bandwidth are shown in this paper. The size of the filter is 0.25
(λg *λg ). The minimum insertion loss is 1.7 dB and the common University of Minnesota, USA
mode suppression is more than 50 dB in the pass band and more EuMCPoster02-10, Time: 12:30
than 32 dB below 10 GHz, which is quite strong compared to the The effect of frequency selective surface (FSS) augmentation on the
published balanced filter. radiation of a slot or patch antenna is investigated. A variety of FSS
designs comprised of horizontal and vertical slots are analyzed
A Hybrid Model for Manifold Multiplexers Without and compared for two sources — slot or patch. Simulations
Sleeves and measurements are shown for select combinations that offer
near-field beam-splitting capability.
Xinshe Yin, Jun Yang, Shoujia Sun; CAST, China
EuMCPoster02-6, Time: 12:30 Electrically Tunable Thin-Film Magnonic Crystals
A hybrid equivalent circuit model for the simulation of manifold Based on a Slot Transmission Line
multiplexers without sleeves is presented. The model uses an EM A.A. Nikitin 1 , A.A. Nikitin 1 , A.B. Ustinov 1 , A.A.
based T-junction which also contains the first coupling iris between
manifold and channel filter. The first resonator connected to the Semenov 1 , E. Lähderanta 2 ; 1 St. Petersburg
T-junction is represented by a section of waveguide transmission Electrotechnical University, Russia; 2 Lappeenranta
line and the rest part (a reduced order channel filter) is represented University of Technology, Finland
by a modified coupling matrix model. Design formulas are pre- EuMCPoster02-11, Time: 12:30
sented. A C-band 16-channel manifold multiplexer without sleeves
for satellite application is designed and tested to demonstrate the Transmission characteristics of thin-film ferrite-ferroelectric
validity of the method. Good compromise between simulation magnonic crystals based on a slot transmission line with a mod-
accuracy and design efficiency is achieved. ulation of the slot width were investigated for the first time.
Dispersion characteristics of spin-electromagnetic waves in the
investigated structure were obtained using the approximate bound-
New Rectangular Waveguide BPF Design Using
ary condition method and the coupled-mode approach. Band gaps
Complementary Split Ring Resonator in the frequency response of the magnonic crystal were studied.
Werner Arriola, Carlos Arriola, Jong Wook Lee, Their dual tunability by both external electric and magnetic fields
was demonstrated.
Ihn Seok Kim; Kyung Hee University, Korea
EuMCPoster02-7, Time: 12:30 Nonreciprocal Frequency Mixing in the Nonlinear
This paper presents a new standard rectangular waveguide band- PT-Symmetric Hyperbolic Metamaterials
pass filter (BPF) design method based on complementary split
O.V. Shramkova, G.P. Tsironis; University of Crete,
ring resonator (CSRR). 3-dB fractional bandwidth (FBW) from 3.2%
to 31% can be controlled by split positions along the slot in the Greece
resonator. A modified lumped element circuit model is proposed EuMCPoster02-12, Time: 12:30
and used to explain the resonant frequencies of the CSRR. A design The dispersion properties and combinatorial frequency generation
example of a Ku-band 3rd order BPF with 5% FBW and maximum by the PT-symmetric stack composed of hyperbolic metamaterial
47
EuMC 2016 4–6 October 2016 London, UK
layers separated by dielectric media with balanced loss and gain excited from an antenna located at one end of the MRI system bore.
have been investigated. It has been shown that the nonlinear In this paper, full-wave electromagnetic (EM) simulations were per-
response of the stack is strongly enhanced as the pumping wave formed for an 8-element stepped impedance resonators (SIRs) coil
frequency corresponds to the hyperbolic regime for nonlinear array combined with a circularly polarized patch antenna loaded
metamaterial layer. The effect of the pump wave nonreciprocal with a spherical dielectric phantom (φ = 17 cm). An optimization
reflectance on the efficiency of the three-wave mixing process is routine was developed to homogenize and maximize the B 1 + field
illustrated by the simulation results. We have demonstrated that inside the phantom. The results yield a combined B 1 + field that
the rate of gain/loss in dielectric layers amplifies the intensity of is 1.3 times higher than the field of a sole 8-element SIRs volume
the frequency mixing process. coil and 3.5 times higher compared to the TW approach only. The
B 1 + field homogeneity for the 8-element SIRs volume coil is much
An Optically Transparent Wideband High better than for the TW approach only, where the E-field is about
Impedance Surface 2.3 times higher than the use of a sole 8-element SIRs coil array.
After optimizing the combined B 1 + field with amplitude/phase
Mahmoud M. Mostafa 1 , Mohamed I. Ibrahim 1 , control, the B 1 + field homogeneity was improved by 67% and 91%
Amr M.E. Safwat 1 , Tamer M. Abuelfadl 2 ; 1 Ain Shams in the central transversal and sagittal slices, respectively.
University, Egypt; 2 Cairo University, Egypt
EuMCPoster02-13, Time: 12:30
A 70MHz Double Waveguide Set-Up for
Hyperthermia of Deep Superficial Tumors
This paper presents an optically transparent wideband High
Impedance Surface (HIS) at 5 GHz. The surface is designed on H.P. Kok, A. Bakker, M.W. Kolff, G. van Tienhoven,
acrylic substrate. Results show a good matching between the pro- M.C.C.M. Hulshof, G. van Stam, J. Crezee; Academic
posed circuit model, EM simulations, and measurements. The ±90◦
Medical Center, The Netherlands
BW is 1 GHz (from 4.5 to 5.5 GHz) and the optical transparency is
80%. EuMCPoster02-18, Time: 12:30
Deep seated superficial tumors cannot be heated adequately with
Dual-Polarization Correlation Radiometry System existing hyperthermia systems. This study investigates the use of
for Microwave Imaging of Heat Sources of Biological a new flexible double waveguide design for hyperthermia of these
treatment sites. The proposed set-up consists of two opposing
Tissues
rectangular 70 MHz waveguides. The aperture size of the bottom
Rae-Seoung Park, Byeongdeok Park, Byambaakhuu antenna was 20×34cm and three different interchangeable top
Batnairamdal, Changyul Cheon; University of Seoul, antennas with aperture size 20×34cm, 15×34cm and 10×34cm
were proposed to allow appropriate tumor coverage at any location.
Korea Simulations in a homogeneous phantom and a patient anatomy
EuMCPoster02-14, Time: 12:30 were performed. Phantom results showed that good SAR coverage
In this paper, we propose a dual-polarization correlation radiom- is possible with all three antenna combinations. Simulation for
etry system to obtain an image of heat sources in the biological the patient anatomy confirmed that adequate heating of deep
tissues. To receive the polarized signal caused by grains of tissue, superficial tumors is possible with the proposed design.
a square waveguide antenna was used for dual-polarization. We
chose 3.7 GHz as the operating frequency for the correlation ra- Design of Conformal Wideband Antennas for
diometry system considering the penetration depth of a biological Capsule Endoscopy Within a Body Tissue
tissue consisting of skin, fat, and muscle. We experimentally
demonstrated that the dual-polarization system is superior to the
Environment
single-polarization system for imaging the heat source distribution Julia Faerber, Gerard Cummins, Marc P.Y. Desmulliez;
in the biological tissue. Heriot-Watt University, UK
EuMCPoster02-19, Time: 12:30
Imaging of Exosomes by Broadband Scanning
In this paper, two conformal antennas for wireless telemetry are
Microwave Microscopy
proposed for use in wireless capsule endoscopy applications.
Xin Jin 1 , James C.M. Hwang 1 , Marco Farina 2 , Andrea Both antennas are simulated in a simple one-layer body phantom
Di Donato 2 , Davide Mencarelli 2 , Antonio Morini 2 , using the CST software package. Measurements were carried out
using additively manufactured prototypes within a body phantom
Giuseppe Venanzoni 2 , Francesca De Angelis 2 , material. Good agreement was obtained between measured and
Francesco Piacenza 3 , Marco Malavolta 3 , Mauro simulated frequency responses.
Provinciali 3 ; 1 Lehigh University, USA; 2 Università
Politecnica delle Marche, Italy; 3 INRCA, Italy Tunable 13C/1H Dual Channel Matching Circuit for
EuMCPoster02-16, Time: 12:30 Dynamic Nuclear Polarization System with
In this work, we imaged exosomes with scanning tunneling mi- Cross-Polarization
croscopy (STM) and broadband scanning microwave microscopy Oleksandr Rybalko, Sean Bowen, Vitaliy Zhurbenko,
(SMM) simultaneously, using exosomes prepared by a new salivary
isolation method. By transforming the frequency-domain data to
Jan Henrik Ardenkjær-Larsen; Technical University of
the time domain with optimum time gating, exosome images of Denmark, Denmark
higher contrast and resolution were obtained by using SMM than EuMCPoster02-20, Time: 12:30
by using STM or atomic force microscopy (AFM). In this paper we report initial results of design and practical
implementation of tuning and matching circuit to estimate a per-
Improved Field Homogeneity for Multi-Channel formance of Dynamic Nuclear Polarization (DNP) at a magnetic field
Stepped Impedance Microstrip Transceiver Arrays of 6.7 T. It is shown that developed circuit for signal observation
and Travelling Wave for MRI at 7T is compact, easy to make and provides low return loss (typically
better than -45 dB) at a tuning range ±3 MHz for both resonant
Ibrahim A. Elabyad 1 , T. Herrmann 2 , C. Bruns 2 , J. frequencies. In addition, transmission parameters measured
Bernarding 2 , Daniel Erni 3 ; 1 Thebes Academy, Egypt; between 13C and 1H channels are less than -17 dB and -50 dB for
2
OvG Universität Magdeburg, Germany; 3 Universität 71.8 MHz and 285.5 MHz, respectively showing a good isolation
between the two channels. Measurement results with a tuning
Duisburg-Essen, Germany and matching circuit prototype are presented including obtained
EuMCPoster02-17, Time: 12:30 spectra (13C and 1H) and estimation of the signal-to-noise ratio.
A multi-element microstrip transceiver array is a promising ap-
proach for magnetic resonance imaging (MRI) at 7T (298 MHz).
Travelling wave (TW) MRI is another method where the RF magnetic
field B 1 + is carried by propagating circularly polarized modes
48
EuMC 2016 4–6 October 2016 London, UK
Dispersion Compensation Through Varying either two cased annular rings or two circular disks. The antennas
Temporal Windows for Time Reversal Methods were printed either on paper substrate or on flexible Polyethylene
Terephthalate (PET) substrate, by using flexographic and screen
Ammar M. Abduljabbar 1 , Mehmet E. Yavuz 2 , Fumie printing techniques. To complete the comparative study, the
Costen 1 , Ryutaro Himeno 3 , Hideo Yokota 3 ; 1 University antennas designs were also realized by aluminum etching carried
of Manchester, UK; 2 USA; 3 RIKEN, Japan on a PET film. In this paper, the simulated and measured results
EuMCPoster02-21, Time: 12:30 are also compared.
Electromagnetic signals propagating in dispersive and lossy Slot-Ring Multiport Driven Antenna with Improved
media undergo additional attenuation when compared to their
Airside Radiation for Terahertz Communications
counterparts propagating in the free space. In this paper, we
propose a threshold approach and Short-Time Fourier Transform Monageng Kgwadi, Khalid Hamed Alharbi, Jue Wang,
(STFT) based inverse filters to compensate the attenuation in Edward Wasige; University of Glasgow, UK
Time Reversal (TR) imaging algorithms. Although, the presence of
EuMCPoster02-25, Time: 12:30
dispersion and loss breaks the time-reversal invariance of the wave
equation in such media, the proposed algorithm allows improved A slot-ring multiport driven (MPD) antenna is evaluated for opera-
TR focusing performance by minimizing the unwanted noise in the tion in the terahertz band with emphasis on air-side radiation on a
received signals without increasing the computational cost thanks thick Indium Phosphide (InP) substrate. Geometrical modification
to utilization of less number of inverse filters. The introduced to the known slot-ring are made by employing a circular outer
algorithm can have applications in various disciplines such as ground and a backing ground plane to focus the radiation in
medical imaging and subsurface detection. the airside direction. Optimization of the modified structure is
made to find the optimal size of the upper ground plane. The
Microwave Imaging for Delamination Detection in optimal design achieves maximum directivity of 10.8 dB which is
T-joints of Wind Turbine Composite Blades an improvement of 3 dB from the original design. Moreover, the
radiation is directed in the airside direction with a front-to-back
Zhen Li, Constantinos Soutis, Arthur Haigh, Robin lobe ratio of 14 dB. The slot-ring antenna design is verified by
Sloan, Andrew Gibson, Noushin Karimian; University fabrication at 5 GHz and achieves 10.2 dB directivity.
of Manchester, UK Push-Button Based Antenna for Wireless
EuMCPoster02-22, Time: 12:30
Communication
Wind turbines play an increasingly important role in renewable
power generation. The structural health monitoring could better Dominique Lo Hine Tong, Philippe Minard, Jean-Marc
improve the maintenance and operation of the wind turbine blades Le Foulgoc; Technicolor, France
in the field. In this paper, delamination in glass fibre composite EuMCPoster02-26, Time: 12:30
joints of a wind turbine blade is successfully detected using the
This paper presents a novel antenna concept that exploits oppor-
non-contact microwave imaging technique with an open-ended
tunistically the usage of electromechanical push button switches in
waveguide. The existence and extent of the delaminated region
home networking devices to make them radiating like an antenna.
are identified from the produced scan images. In addition, the
The proposed approach is applied for the design of antennas
variation of skin/flange thickness, the presence of the web un-
for WLAN applications in the 2.4 and 5GHz bands. The achieved
derneath the skin and manufacturing induced defects can also
proofs of concept show good correlation between simulation and
be distinguished. The phase profiling provided by the scanning
measurements, with remarkable radiating performances.
shows higher sensitivity to the presence of delamination than the
magnitude profiling. The optimum inspection frequency range is Planar Waveguide Feed for V-Band Bull’s Eye
investigated, which offers a reference for future applications.
Antenna
Self-Calibrating Highly Integrated Radio Frequency Clement J. Vourch 1 , Timothy D. Drysdale 2 ; 1 University
Front-End for Parallel π /4 DQPSK Decoding of Glasgow, UK; 2 Open University, UK
Maximilian Wölfel 1 , Ulrich Bochtler 1 , Thomas F. EuMCPoster02-27, Time: 12:30
Eibert 2 , Christoph Schmitt 3 ; 1 Hochschule A technique is presented for feeding leaky-wave Bull’s eye anten-
Aschaffenburg, Germany; 2 Technische Universität nas from a planar waveguide, based on a planar to rectangular
waveguide transition and a milled waveguide extension. Bull’s
München, Germany; 3 KaiTec, Germany
eye antennas are low-profile planar antennas that exploit leaky
EuMCPoster02-23, Time: 12:30
wave principles to achieve high gain. Currently Bull’s eye an-
This work describes a high-frequency front-end that is able to tennas use hollow waveguide feeds (rectangular or circular), but
decode up to four π /4 DQPSK modulated 25 kHz carriers simulta- lower-cost feed options open up new applications for the antenna,
neously in a 5 MHz downlink band located between 70 MHz and 6 particularly if it can permit compact overall size due to tight
GHz. The front-end is self-calibrating its time-variant phase- and integration with the underlying millimeter-wave circuit (e.g. in
timing-offsets by maximum likelihood estimators. The calibrating small satellites or communications backhaul on earth). While
algorithm does not depend on a particular network protocol or substrate-integrate-waveguides often offer better performance
training sequence and can easily be adapted to any other linear than microstrip waveguides at millimeter wave frequencies, the
modulation schemes. Due to its small shape-factor caused by feed integration challenge is substantially similar and we were
extensive conversion of analogue components into digital sections, able to access a suitable fabrication technology for microstrip
the front-end is suitable for operation in hand-held measurement waveguides. We produced a prototype microstrip-fed Bull’s eye
equipment. antenna operating at 60 GHz and measured its far field radiation
pattern to confirm that the antenna’s radiation pattern was not
Comparative Study of WLAN Dual-Band Monopole substantially affected by the change in the feed.
Antennas Printed and Etched on Paper and PET
Substrates Evaluation and Performance Analysis of 3D Printing
Technique for Ka-Band Antenna Production
Dominique Lo Hine Tong 1 , Aurelien Ayissi Manga 1 ,
Philippe Minard 1 , Anastasia Delattre 2 , Laura Unai Armendariz, Simon Rommel, Sebastian
Crowther-Alwyn 2 , Pascal Borel 2 ; 1 Technicolor, France; Rodriguez, Idelfonso Tafur Monroy, Juan José
2
CTP, France Vegas Olmos, Christian Bang Olsen; Technical
EuMCPoster02-24, Time: 12:30 University of Denmark, Denmark
EuMCPoster02-28, Time: 12:30
In this study, dual-band WLAN antennas using different low-cost
technologies, already widely deployed in mass production indus- This paper presents the design and fabrication of 3D printed WR-
tries, were fabricated and their performances compared. The 28 waveguide horn antennas operating in the Ka-band frequency
antennas evaluated were based on monopole antennas containing range between 26.5GHz and 40GHz. Three antennas are fabricated
49
EuMC 2016 4–6 October 2016 London, UK
from polylactide acid filaments in conductive and non-conductive of the radio telescope with a relative pointing error lower than
variants; the latter is covered with conductive paint. The gain and 3arcsec and an aperture efficiency higher than 75%. Quasi-optical
voltage standing wave ratio performance of the fabricated horn techniques have been used to implement a frequency independent
antennas is measured, showing promising performance. Antenna system. Phase corrected feeds have also been developed in order
gain values between 5dBi and 14dBi are found, comparable to the to reduce the size of the feeds and to allow cooling down and
performance of metal milled horn antennas. receiver noise temperature improvement. The design has been
validated with laboratory test and on site tests after positioning
Dual-Band Dual-Polarized Slot Antenna Loaded with and alignment at the focal zone of the 40 meter Yebes Observatory
Split Ring Resonators radio telescope.
Multi Frequency Feed System for High Magnification Antenna Array Control via Integrated
Cassegrain Radiotelescopes at Millimeter Optically-Activated Organic Semiconductor for
Wavelengths S-Band Applications
Samuel López Ruiz 1 , Félix Tercero Martínez 1 , José A. Andre Sarker Andy, James William Ewart Kneller,
López-Fernández 1 , Seog-Tae Han 1 , Pablo-Luis Rostyslav Dubrovka, Theo Kreouzis, Robert Donnan;
López-Espí 2 , Rocío Sánchez-Montero 2 , Francisco J. Queen Mary University of London, UK
Beltrán Martínez 2 ; 1 Instituto Geográfico Nacional, EuMCPoster02-36, Time: 12:30
Spain; 2 Universidad de Alcalá, Spain A novel optically-activated antenna array has been proposed, de-
EuMCPoster02-32, Time: 12:30 signed, and analysed using photosensitive organic semiconductor
poly (3-hexylthiophene) (P3HT, 95%) and [6,6]-Phenyl C61 butyric
This paper presents the design of a feed system at K and Q
acid methyl ester (PCBM, 5%) for S-band applications. A two-patch
frequency bands which permits simultaneous observation at a
antenna array, using soda-lime glass as the primary substrate and
radio telescope. The system will be used for radio astronomical
indium-tin-oxide (ITO) as the ground plane, was designed using
VLBI applications. With this design we get simultaneous operation
the CST Studio Suite. The organic semiconductor heterojunction
with two different cryogenical receivers placed at the focal zone
P3HT:PCBM was employed in the design as a secondary substrate
50
EuMC 2016 4–6 October 2016 London, UK
atop the glass. Characterisation of the organic polymer was Directional Modulation for QAM Signals with PAPR
performed using quasi-optical measurement bench over the WR3 Reduction
waveguide band to estimate the change in dielectric between
dark and active (i.e illuminated), states. This change is taken
Yudong He, Youjiang Liu, Niantong Du, Nan Xie; CAEP,
into account while modelling the antenna array, and the potential China
beam-steering applications are examined. EuMCPoster02-40, Time: 12:30
Directional modulation (DM) is a promising technology for physical
A Ka-Band Reflectarray with Variable Amplitude layer security. Traditional DM methods ignored the issue of the
Unit Cells decomposed signals’ peak-to-average power ratios (PAPRs), which
may lead to poor amplifier efficiency since high back-off power
Peter Alizadeh, Clive Parini, Khalid Z. Rajab; Queen is required. To improve amplifier efficiency, a PAPR reduction
Mary University of London, UK concept is proposed for DM of QAM signals in this paper. An
EuMCPoster02-37, Time: 12:30 iterative projection method is implemented to guarantee secrecy
Reflectarrays are becoming increasingly popular for their ability to performance and low PAPRs simultaneously. Simulation and
overcome the bulkiness of reflector antennas, while also combining experimental results show that, comparing with traditional DM
the advantages that a phased array antenna may provide. Here, method, the proposed approach has almost the same secrecy
a proposal for a reconfigurable reflectarray is presented, with the performance but reduces the PAPR of transmitted signal for each
main novelty being the control of the amplitude of the reflection antenna element by about 5.6dB to 7.9dB.
via individually addressable optically reconfigurable elements.
Initially, a study of the achievable radiation patterns from numeri- Tomographic Reconstruction of 2D Rain Fields from
cally modelling the reflectarray geometry is presented. Following Microwave Link Attenuation Measurements
this, the unit cell which will achieve the required amplitude and
phase variations is presented. Reflection amplitude variation is
Michele D’Amico 1 , Andrea Manzoni 1 , Gian Leonardo
achieved in the unit cell by optically exciting a semiconductor Solazzi 2 ; 1 Politecnico di Milano, Italy; 2 NGI, Italy
substrate using LEDs. To accurately model the semiconductor EuMCPoster02-41, Time: 12:30
under illumination, a characterisation setup was used. Finally, the In this paper we report the use of a microwave link network to
radiation patterns of a small reflectarray are compared with the perform the reconstruction of space-time rainfall field distribution
numerically modelled patterns to verify both the reconfiguration over a limited area at ground level. This is possible through the
mechanism and the numerical model. use of a real time tomographic technique which makes use of
the relations between the rainfall intensities and the attenuation
Characterization of a New Integrated Scan-Phase measured on the links. Here we show how a commercial network
Antenna Diversity Circuit for Automotive Satellite operating at K band, located in Italy and managed by a broadband
Radio Reception Internet provider, can be suitable to achieve accurate rainfall maps.
The results of the adopted technique are successfully validated
S. Senega 1 , J. Roeber 2 , A. Nassar 1 , Robert Weigel 2 , C. exploiting rain accumulations measured by a traditional gauge
Heuer 3 , Stefan Lindenmeier 1 ; 1 Universität der network.
Bundeswehr München, Germany; 2 FAU
A Compact Four Element CSRR-Loaded Antenna for
Erlangen-Nürnberg, Germany; 3 FUBA Automotive
Dual Band Pattern Diversity MIMO Applications
Electronics, Germany
EuMCPoster02-38, Time: 12:30 Debdeep Sarkar, Kushmanda Saurav, Kumar Vaibhav
An integrated antenna diversity system is described which enables Srivastava; IIT Kanpur, India
a high increase of reception performance for satellite digital audio EuMCPoster02-42, Time: 12:30
radio services (SDARS). A detailed analysis is given for the gain and In this paper, a four element compact MIMO antenna system
noise figure requirements specifically regarding the implementa- is proposed for dual-band (GSM/WLAN/WiFi/LTE) applications.
tion in an integrated circuit. Dual-band antenna characteristics is obtained by loading L-shaped
On base of this analysis a hardware demonstrator of the scan-phase monopoles with complementary split ring resonators (CSRR),
antenna diversity system is realized in which the phase aligned which produce an antenna resonance in addition to the reference
rf combining and signal selection is implemented completely in monopole mode. Inter-element isolation of more than 15 dB is
a compact IC with a package size of only 8mm by 8 mm. For achieved in both the operating bands. The four element MIMO
evaluation the integrated scan-phase antenna diversity system is configuration exhibits pattern diversity in both the bands due to
fed by different antenna signals of real test drives in the US. The the directional radiation characteristics of the dual-band antenna
diversity system proves its functionality in reducing the overall element. The proposed antenna has satisfactory performance in
time of audio mutes by almost one order in magnitude compared terms of MIMO parameters as envelope correlation coefficient (ECC)
to standard single antennas. < 0.5, mean effective gain (MEG) ratio (MEGi /MEGj ) ≈ 1, total active
reflection coefficient (TARC) < -10 dB and average channel capacity
Suppressing Mutual Coupling of MIMO Antennas loss (CCL) < 0.5 bits/s/Hz are obtained in both the working bands.
Experimental results on the fabricated MIMO antenna prototype
with Parasitic Fragment-Type Elements
confirms the validity of the proposed design concept.
Lu Wang, Gang Wang, Qi Zhao; USTC, China
EuMCPoster02-39, Time: 12:30 LTE Based Spatial Multiplexing MIMO with Single
Parasitic fragment-type element can be used in suppressing mutual Radio
coupling of multiple-input multiple-output (MIMO) antennas. By Gweondo Jo, Jung-Nam Lee, Hyoung-Oh Bae, Young-Ho
gridding a specific design space between MIMO antennas into
fragment cells, and metalizing some of the cells selected by multi- Lee, Donghyuk Gwak, Jung-Hoon Oh; ETRI, Korea
objective optimization searching, parasitic fragment-type isolation EuMCPoster02-43, Time: 12:30
element can be designed to acquire desired isolation and return This paper validates the concept of receiving LTE MIMO signal to
losses. For demonstration, a parasitic fragment-type isolation obtain spatial multiplexing gain with single radio beam switching
element for closely spaced printed monopoles operating at 2.45 antenna system that consists of a single active antenna with
GHz is designed and verified by test. The proposed parasitic multiple parasitic elements around it. Performance measurements
fragment-type element achieves maximum isolation 29 dB, and were conducted by using a testbed equipped with single radio. Test
isolation higher 16 dB in the operation band. Besides, due to its results with LTE signal have not been reported so far. Measured
flexibility and versatility, fragment-type structure can be applied SNR of the recovered LTE signal was 31.33 dB on average in
in forming miniaturized element of high isolation. indoor environment. From the implementation perspective, the
transient time during the beam switching results in performance
degradation. It is beneficial to reduce the time as short as possible
by using fast switching device. Considering that transient time is
51
EuMC 2016 4–6 October 2016 London, UK
fixed once a switching device is hardwired, it is good to reduce the infrastructures to detect early attempts of physical and cyber
switching rate as possible because low switching rate corresponds attacks. The proposed RFID sensor network, developed within the
to the reduced occurrence of transient state. H2020 project SCISSORS, includes a new family of multi-purpose
wireless boards, usable in both battery-less and battery-assisted
Electromagnetic Characterization of Automotive modes, a multi-antenna reader unit and a multi-level command
Sunroofs for Car-to-X Applications and control software capable to enforce a hierarchical monitoring
of complex environments.
Miguel Bueno Diez, Wilfrid Pascher, Stefan
Lindenmeier; Universität der Bundeswehr München, Wireless Sensors for the Incident Pressure
Germany Measurement in Air Blast
EuMCPoster02-44, Time: 12:30
J. Fourmann 1 , A. Coustou 1 , H. Aubert 1 , P. Pons 1 , J.
For Car-to-X communication at 5.9 GHz effects of electromag- Luc 2 , A. Lefrançois 2 , M. Lavayssiére 2 , A. Osmont 2 ;
netic wave propagation inside and along the sunroof of cars 1
are investigated by means of modal analysis of a dielectric slab LAAS, France; 2 CEA Gramat DAM, France
waveguide, numerical modeling by finite integration technique EuMCPoster02-48, Time: 12:30
and measurements. Since the field is guided inside the glass as This paper addresses the measurement of incident pressure in air
fundamental TM0 mode and overlaid by free space radiation, blast experiment using wireless pressure sensors. The analysis
interference effects reduce the range in forward direction, an of the proposed wireless system is presented and measurement
important disturbing effect for car-to-car communication. The results obtained during an air blast event are reported. The
influences of roof curvature as well as window size and position on proposed approach offers a very attractive solution in terms of
wave propagation and radiation are investigated. Deep nulls in the cost, size and power consumption for transmitting and analyzing
radiation pattern are found in direction of the forward corners of sensor data in harsh environment.
the glass roof. Metallized sunroofs are shown to improve forward
radiation and nulls by at least 6 dB. Computational results are Undergraduate Teaching for Digital Signals on
evaluated by measurements on a whole car in an open site test Transmission Lines
range.
R.J. Collier; University of Kent, UK
Design and Analysis of a Novel Low Cost High Data EuMCPoster02-49, Time: 12:30
Capacity Chipless RFID Tag on Plastic Substrate This paper sets out the case for an increase in the teaching of
pulses on transmission lines, since this is now their major usage.
Shuvashis Dey, Nemai Chandra Karmakar; Monash
Following this, the paper contains some examples of the typical
University, Australia problems that could be used in teaching and the basic principles
EuMCPoster02-45, Time: 12:30 that they illustrate. In the conclusion, the paper has some general
This study focuses on the design and analysis of a low cost com- comments about the modern relevance of transmission lines.
pact high data capacity chipless RFID tag on flexible mylar plastic
substrate. The size of the overall tag with integrated antennas is
less than a credit card. The designed tag uses polarization diversity EuMIC/EuMC01 : ARMMS RF and Microwave
to provide a bit capacity of up to 20 bits in the short range UWB Society Selected Papers
band of 22–26.5 GHz. A technique for enhancing the minimum Room 1, 09:00–10:40, Tuesday 4th October 2016
detection depth is applied here to increase the readability of the
Chair: Dominic Fitzpatrick, PoweRFul Microwave
tag. Along with frequency variation, this paper also proposes the
Co-Chair: Steve Nightingale, Cobham Antenna Systems
scheme for bit detection using phase difference determination in
order to increase robustness. A printed prototype of the proposed
design and its measured result is also illustrated in the paper. Submillimetre Rectangular Waveguides Based on
SU-8 Photoresist Micromachining Technology
Radiofrequency Identification System for David Glynn, Tianhao He, Jeff Powell, Yingtao Tian,
2.4–2.483GHz Based on Passive Surface Acoustic Xiaobang Shang, Michael J. Lancaster; University of
Wave Tags with Anti-Collision Properties Birmingham, UK
Sergey Yankin 1 , Sergey Suchkov 1 , Sergey Komkov 1 , EuMIC/EuMC01-1, Time: 09:00
Aleksey Pilovets 1 , Artem Litvinenko 1 , Iuliia Shatrova 1 , Rectangular waveguides are fundamental structures for the trans-
Dmitry Suchkov 1 , Viktor Nikolaevtsev 1 , Sergey mission of signals at millimetre and submillimetre wavelengths.
Nikitov 2 ; 1 Saratov State University, Russia; 2 Russian This paper describes the design and measured results for two
rectangular waveguides based on layered SU-8 photoresist micro-
Academy of Sciences, Russia machining technology, with double-layer fabrication techniques to
EuMCPoster02-46, Time: 12:30 minimise the air gaps between layers. A brief description of the
Development of anti-collision radiofrequency identification system SU-8 photoresist micromachining procedure is given in the paper.
based passive surface acoustic wave tags in the frequency band of One waveguide is demonstrated for the WR-3 band from 220 GHz
2.4–2.483 GHz is presented. Discrete-time encoding was applied to 325 GHz the other is for the WR-6 band 120 GHz to 170 GHz
for the design. Set of tags with different codes was fabricated both are made of layered SU-8 with a 3 piece construction. Both
using electron lithography and its anti-collision properties were waveguides have novel bends in order to connect to the measure-
tested using reader in form of network analyzer with two antennas. ment apparatus. The measured performance is presented and
Sufficient level of information signal losses for technical imple- compared to conventional machined metal waveguide structures.
mentation was obtained. In practice, simultaneous detection of up The measured insertion loss for the SU-8 waveguides in both bands
to 100 closely spaced objects can be implemented. Identification is better than 0.03 dB/mm.
range for the permitted level of radiation power reader is up to 20
meters. Challenges of Wearable Antenna Design
Industrial RFID Sensing Networks for Critical Sema Dumanli; Toshiba Research Europe, UK
EuMIC/EuMC01-2, Time: 09:20
Infrastructure Security
Antenna design for wearable technologies is a challenging task
C. Occhiuzzi, S. Amendola, S. Manzari, G. Marrocco; due to the body being in the near-field of the antenna, the highly
Università di Roma “Tor Vergata”, Italy dynamic nature of the channel and the user acceptance issues.
EuMCPoster02-47, Time: 12:30 The antenna should be insensitive to the near field effects of the
body in order to minimize detuning and to keep its efficiency high
The Radiofrequency Identification of the emerging Industrial Inter-
which translates to longer battery life time. Preferably, it could
net of Things is here applied to the low-level monitoring of critical
have a reconfigurable gain pattern to satisfy almost contradictory
52
EuMC 2016 4–6 October 2016 London, UK
requirements of different links and to cope with the dynamic to lumped element capacitors which are known to degrade the
channel conditions. Finally the antenna should be either small or loaded Q of the tunable filters over the tuning range. Simulation
flexible for the users satisfaction while keeping the SAR levels low and measurement results are presented illustrating a reasonably
for safety. This paper discusses the aforementioned requirements wide tuning range. The concept was experimentally demonstrated
in detail and proposes antennas tackling these challenges. using a 2-pole tunable combline filter designed at 7 GHz.
Broadband Push-Pull Power Amplifier Design at Advances in MEMS Switches for RF Test
Microwave Frequencies Applications
R.M.H. Smith 1 , S.C. Cripps 2 ; 1 Plextek RFI, UK; 2 Cardiff Tamir Moran 1 , Chris Keimel 2 , Todd Miller 3 ; 1 National
University, UK Instruments, USA; 2 Menlo Microsystems, USA; 3 GE
EuMIC/EuMC01-3, Time: 09:40 Global Research, USA
A broadband, high efficiency push-pull power amplifier is pre- EuMIC/EuMC02-2, Time: 09:20
sented between 0.5 GHz and 1.5 GHz. Coaxial cable transmission This paper details the broadband RF switching challenges in Test
line baluns are utilised to transform the impedance environment and Measurement (T&M) and Automated Test Equipment (ATE)
of the transistors down to 25 Ω, greatly simplifying the matching, applications, including the need for high performance RF switches
whilst still providing a 50 Ω environment to interface with other capable of 25W. The design, validation and manufacturing of
components. Using packaged GaN HEMT transistors, typical ohmic RF MEMS switches are presented as suitable replacements
output powers of 45 dBm and efficiencies of 44% to 75% have been for electromechanical (EM) switches in T&M and ATE applications.
measured across a 3:1 bandwidth. The small signal input match is The switches are capable of supporting DC to RF frequencies,
less than -10 dB and small signal gain is greater than 10 dB across reliably hot switching at least 30 dBm of power for millions of
the entire band. cycles, handle as much as 25W of power under cold switching
conditions, and are available in standard surface mount (SMT)
Understanding the 3 Level Doherty packages that make them easy to use with low cost, traditional
Michael James Roberts; Slipstream Engineering Design, processes.
UK
Development of a DC to K-Band Ultra Long On-Life
EuMIC/EuMC01-4, Time: 10:00
RF MEMS Switch with Integrated Driver Circuitry
The Doherty amplifier is a well-known technique for improving
efficiency of a power amplifier in a backed off condition. The Eric Carty, Padraig Fitzgerald, Padraig McDaid,
standard 2 way Doherty amplifier with a peak in efficiency at 6dB Bernard Stenson, Raymond Goggin; Analog Devices,
back off and full power is commonly used and well understood.
Ireland
With the use of increasingly complex signals comes the require-
EuMIC/EuMC02-3, Time: 09:40
ment to move the peak in efficiency to higher levels of back off
whilst maintaining efficiency up to full power output. This can This paper describes the development of a DC (0Hz) to over 26GHz
be achieved with asymmetrical Doherty amplifiers or by utilising (K-Band), ultra-long on lifetime single pole dual throw (SPDT)
N-Way Doherty techniques. In this paper we will explain from first micro-electro-mechanical systems (MEMS) switch with integrated
principles the operation of the 3 Level Doherty architecture based driver circuitry. This paper reports for the first time a novel active
on an NXP design that uses three LDMOS transistors of equal size. (electrostatic) open design that guarantees a greater than 10 years
Design challenges faced with this type of amplifier are presented continuously on lifetime (COL) at 85◦ C, as well as a minimum
and compared against conventional 3-Way Doherty architecture. actuation lifetime of 1 billion cycles. The switch exhibits 1dB of
Test results are presented which demonstrate a drain efficiency of insertion loss and 23dB of off isolation at 26GHz. The switch
greater than 40% at 10dB back off. solution including the driver is packaged in a small 5mm × 4mm
× 0.95mm 24-pin quad flat no leads (QFN) plastic package.
Beyond RF Ablation: Other Uses for RF Within the
Body High Q Zero Level Packaged RF-MEMS Switched
1 2 Capacitor Arrays
Olive Murphy , Mohammad Reza Bahmanyar ,
Christopher N. McLeod 2 , Christofer Toumazou 2 , Kevin Nadaud 1 , Fabien Roubeau 1 , Arnaud Pothier 1 ,
Magdi Yacoub 3 ; 1 Analog Devices, Ireland; 2 Imperial Pierre Blondy 1 , Lin-Yang Zhang 2 , Romain Stefanini 2 ;
1
College London, UK; 3 Harefield Hospital, UK XLIM, France; 2 AirMems, France
EuMIC/EuMC01-5, Time: 10:20 EuMIC/EuMC02-4, Time: 10:00
The use of high frequencies within the body is commonplace for This paper presents the design, the realization and the mea-
treatment and imaging, but, other than a few examples very little surement of a thin-film packaged RF-MEMS switched capacitors.
exists in terms of RF sensors and for communication deep into Packaging is included in microelectronics fabrication process, with
the body. This paper will give an overview of an RF powered Silicon Nitride thin film. The capacitors are actuated by deflecting
implantable blood pressure sensor for continuous monitoring and thin gold metal membrane towards the package dielectric, increas-
in doing so demonstrate the use of RF within the body. ing the capacitance by a factor 2.47. The device size, including
its packaging, is 80 × 90μm2 . The highest quality factor of a
single capacitor is 1515 at 5 GHz, which comes from the low
parasitic capacitance and the thick metallization. To obtain larger
EuMIC/EuMC02 : RF MEMS Components and
capacitance value, an array of 4 × 2 capacitors has been realized
Packaging and measured.
Room 13, 09:00–10:40, Tuesday 4th October 2016
Chair: Stepan Lucyszyn, Imperial College London Thin Film Wafer Level Encapsulated RF-MEMS
Co-Chair: Kamal K Samanta, AMWT Ltd Switch for D-Band Applications
S. Tolunay Wipf, A. Göritz, M. Wietstruck, C. Wipf, B.
High-Q Tunable Filter with a Novel Tuning Structure
Tillack, Andreas Mai, Mehmet Kaynak; IHP, Germany
J. Jiang, Raafat R. Mansour; University of Waterloo, EuMIC/EuMC02-5, Time: 10:20
Canada This paper presents a wafer level packaged (WLP) RF-MEMS switch
EuMIC/EuMC02-1, Time: 09:00 fabricated in a 0.13 μm SiGe BiCMOS process technology for
This paper presents a novel structure for realizing high-Q tunable D-Band (110–170 GHz) applications. For the wafer level packaging,
combline filters using RF MEMS switches. The design employs pla- thin film encapsulation approach is developed and used during
nar circuits loaded with RF MEMS switches integrated strategically the Back-End-of-Line (BEOL) fabrication process. The fabricated
inside the combline filter structure. The advantage of the proposed wafer level encapsulated (WLE) RF-MEMS switch provides a high
structure is that the MEMS switches do not need to be connected capacitance Con /Coff ratio of 11.1. The fabricated WLE RF-MEMS
53
EuMC 2016 4–6 October 2016 London, UK
switch shows beyond state of the art RF performances of better High-Conversion-Gain 100-GHz Photoreceiver
than 0.67 dB insertion loss and more than 16 dB isolation in all Integrated with UTC-PD and PHEMT Amplifier for
D-band. The measured maximum isolation of the WLE switch is 92-GHz Carrier, 10.7-Gbps Photonic Wireless
51.6 dB at 142.8 GHz with an insertion loss of 0.65 dB.
Communication
T. Umezawa 1 , K. Kashima 2 , A. Kanno 1 , P.T. Dat 1 , K.
EuMIC/EuMC03 : THz Photonics Electronic Akahane 1 , A. Matsumoto 1 , N. Yamamoto 1 , T.
Components and Systems Kawanishi 1 ; 1 NICT, Japan; 2 Hitachi Kokusai Electric,
Room 1, 14:20–16:00, Tuesday 4th October 2016 Japan
Chair: Mohamed Elkhouly, Robert Bosch EuMIC/EuMC03-4, Time: 15:20
Co-Chair: Antti Räisänen, Aalto University
We successfully designed and fabricated a high-conversion-gain
100-GHz photoreceiver integrated with a UTC-PD and a PHEMT
Photonic BiCMOS Technology — Enabler for amplifier for 92-GHz carrier photonic wireless communication.
Si-Based, Monolithically Integrated Transceivers Then, in a demonstration of 92-GHz carrier, OFDM, 16-QAM pho-
Towards 400 Gbps tonic wireless communication, we confirmed that high data rate of
11.03-Gbps (bit error rate of 1×10-3 ) could be achieved at a low
Stefan Lischke, Dieter Knoll, Lars Zimmermann, Pedro optical input power, without post amplifiers for the photoreceiver.
Rito, Ahmet Cagri Ulusoy, Ahmet Awny, Despoina The designs and the results are discussed.
Petousi, Iria Garcia Lopez, Christian Mai, Marcel Kroh,
Bernd Heinemann, Holger Rücker, Rainer Barth, Jens Characterization of Sub-THz Detection Array in
Katzer, Markus Andreas Schubert, Mehmet Kaynak, 0.18μm CMOS Technology
Andreas Mai; IHP, Germany Jixin Chen, Weitian Liu, Pinpin Yan, Chenwei Jia,
EuMIC/EuMC03-1, Time: 14:20 Debing Hou, Chao Yu, Wei Hong; Southeast University,
We present a photonic BiCMOS process enabling for mono- China
lithically integrated Si-based transceiver front-ends towards EuMIC/EuMC03-5, Time: 15:40
single-wavelength 400 Gb/s data rate by combining segmented
A 2×2 pixel array for Sub-THz detection in which each pixel can
Mach-Zehnder-Interferometer modulators and high-speed germa-
be separately addressed has been integrated in a low-cost 0.18μm
nium photo detectors with high-performance electronics.
CMOS technology. Each pixel comprises of an NMOS incoherent
power detection circuit and a high gain operational amplifier.
GaN Laser Driver Switching 30A in the Efficiency of self-mixing is analyzed and improved for FET detector
Sub-Nanosecond Range and the operational amplifier. Sequential pulse generator is used
in the design of row and column signal producing circuit in pixel
Armin Liero, Andreas Klehr, Thomas Hoffmann, array. The measured peak responsivity is 3.3 kV/W at 90 GHz, 4.3
Thomas Prziwarka, Wolfgang Heinrich; FBH, Germany kV/W at 155 GHz. For comparison, the pixel without load resistor
EuMIC/EuMC03-2, Time: 14:40 is also characterized. The measured results show that the pixel
A GaN-HEMT-based laser driver circuit is presented which can with load resistor can efficiently increase the pixel output.
switch 30 A of current with a minimum pulse width of 580 ps. The
pulse width can be varied electronically. Its maximum depends
only on the value of the storage capacitor. This demonstrates EuMIC/EuMC04 : Components for Receivers
the potential of GaN transistors also for high-speed high-current Room 4, 14:20–16:00, Tuesday 4th October 2016
applications at low voltages. The driver is integrated together with Chair: Philippe Descamps, University of Caen
the laser diode on a submount following a special scheme, which Co-Chair: Jan Grahn, Chalmers University of Technology
is essential to keep parasitic inductance low.
Geodetic VLBI Ultra Low Noise Broad-Band Receiver
Electronic Stabilization Methods for a Single-Loop
for 13 Meter VGOS Radiotelescopes
Opto-Electronic Oscillator
Pablo García-Carrenõ 1 , Sonia García-Álvaro 1 , José A.
Mehmet Alp Ilgaz, Luka Bogataj, Boštjan Batagelj,
López-Pérez 1 , María Patino-Esteban 1 , José M. Serna 1 ,
Matjaž Vidmar; University of Ljubljana, Slovenia
Beatriz Vaquero-Jiménez 1 , José A. López-Fernández 1 ,
EuMIC/EuMC03-3, Time: 15:00
Pablo-Luis López-Espí 2 , Rocío Sánchez-Montero 2 ;
The opto-electronic oscillator (OEO) is an oscillator with an optical 1
delay line as a resonator. The fact that the increase in frequency
Instituto Geográfico Nacional, Spain; 2 Universidad de
of an OEO does not increase its phase noise is an important Alcalá, Spain
advantage. This enables the generation of low phase-noise signals EuMIC/EuMC04-1, Time: 14:20
in the microwave and millimeter wave regions. However, for its This paper shows the design, construction and characterization of
more widespread use two problems must be dealt with: frequency an ultra-low noise and broad-band receiver system, to be used for
drift and multi-mode oscillation. This paper presents recently geodetic very long baseline interferometry (VLBI) observations with
proposed, novel methods that address the frequency drift and the the Spanish new 13.2 meter radiotelescopes, in the frame of the
OEO’s multi-mode nature. By implementing a feedback control VLBI Global Observing System (VGOS). The cryogenic receiver front-
loop into the OEO it is possible to achieve a frequency drift of 0.05 end covers the frequency range 2–14 GHz in two simultaneous
ppm/K. With an additional phase modulation of the OEO’s loop linear polarizations. It has an average receiver noise temperature
it is possible to increase the side-mode suppression ratio (SMSR) lower than 20 Kelvin, except for those frequencies affected by
by 5 dB, and a 20-dB improvement in the SMSR is possible with a radio frequency interferences (RFI). The detected signals are sent
quality multiplier. The suggested methods operate in the electrical to the back-end room using broad-band RF over fiber optic links.
domain, which makes them simple, accessible and low cost. Then, the signals are distributed to four dual-channel frequency
up/down converters, which provide the base-band signals for the
digital VLBI back-ends.
54
EuMC 2016 4–6 October 2016 London, UK
55
EuMC 2016 4–6 October 2016 London, UK
Dual-Mode-Resonator-Based Pseudo-Elliptic Filters performance, the distortion components generated by the tran-
with Tunable Response sistor and varactor are made to cancel each other by the proper
design of the output matching network and embedded diode. For
Ahmad Bader Alothman Alterkawi, Fabrizio Gentili, verification, a 2 GHz, 20 dBm class-AB PA was designed, fabricated
Sebastian W. Sattler, Wolfgang Bösch; Technische and characterized. Under WCDMA excitation, an improvement
Universität Graz, Austria of adjacent channel leakage power (ACLR) of about 10 dB and
EuMIC/EuMC05-4, Time: 15:20 power-added efficiency of > 40% were achieved at saturation.
This paper presents the design of filters having frequency-tunable
response based on microstrip dual-mode patch resonators. Dis-
A 20W and Broadband Two-Stage LDMOS Power
crete tunability is achieved through a modified version of a Amplifier with High-Q Cu Integrated Passive Device
standard patch resonator which allows one to switch between for Multi-Band and Multi-Standard Applications
different centre-frequency states. Besides, the selectivity of the
filter is enhanced by transmission zeroes (TZs), two at each side Seungkee Min, Jangheon Kim, Margaret Szymanowski,
of the pass-band. The method has been proven by the design Geoff Tucker; NXP Semiconductors, USA
and measurement of a dual-mode cavity activated by PIN diodes. EuMIC/EuMC06-4, Time: 15:20
The single resonator is then employed to build a filter whose This paper presents a 20W and broadband power amplifier using
electrical measurement resulted in a very good agreement with the high-Q Cu integrated passive device (IPD). Dual-path and two-stage
simulations and showed a maximum IL=1.4 dB (Q-factor of 160). broadband RFIC PA using the latest LDMOS technology covers from
1.5 GHz to 2.5 GHz frequency band and performs exceptionally
EuMIC/EuMC06 : Packaged and Integrated well in multi-mode and multi-band operations. The measured
High-Power Amplifiers power gain and drain efficiency in class-AB mode achieved more
than 30 dB and between 18% and 22% from 1.8 GHz to 2.5 GHz
Room 14, 14:20–16:00, Tuesday 4th October 2016
at 10 dB power back-off, respectively. In order to validate the
Chair: Peter Aaen, University of Surrey multi-band operation, the PA is linearized as the final stage of the
Co-Chair: Olof Bengtsson, FBH low power line-up by the NXP DFE DPD system under 145 MHz 3C
LTE signals and has more than 27% efficiency and -57 dBc corrected
A Packaged Hybrid Doherty PA for Microwave Links ACLR at the average output power of 36 dBm (8 dB back-off). To
the best of the authors’ knowledge, this is the first demonstration
D. Gustafsson, K. Andersson, A. Leidenhed, M.
of broadband high power amplifier with excellent wideband DPD
Malmstrom, A. Rhodin, T. Wegeland; Ericsson, Sweden linearization and RF performance.
EuMIC/EuMC06-1, Time: 14:20
The performance of a 6.5 GHz hybrid GaN Doherty power amplifier High Performance Plastic Packaged 100W L-Band
is reported. The amplifier is packaged in a plastic overmold QFN Quasi-MMIC HPA
9×9 package and includes discrete GaN transistors and inte-
grated passive GaAs splitting, matching and combiner networks. Diane Bouw, Philippe Sin, Marc Camiade, Jean Pierre
Measured results, under continuous wave operation, at 6.5 GHz Viaud; United Monolithic Semiconductors, France
shows 18 dB gain, a P1dB of 42 dBm, and 21% PAE in 9 dB output EuMIC/EuMC06-5, Time: 15:40
power back off. These results are the first reported for a Doherty
This paper describes the development and the obtained results of
power amplifier that comes close to specifications for a typical
a state of the art 100 W L-band Quasi-MMIC HPA packaged in QFN.
point-to-point microwave link application. Furthermore, the pre-
Innovative power passive MMIC technology is combined with high
sented hybrid approach is a step towards cost effective microwave
performance GaN technology in order to provide highly integrated
Doherty power amplifiers.
solution compatible to low cost packaging. The measured devices
A 2.6-GHz-Band 78-W Doherty Power Amplifier with shows an output power of 110 W with more than 55% PAE at 1.3
GHz. To our knowledge, this is the first Internally-Matched plastic
GaN HEMT Unit-Cell Structure Robust for
packaged device proposed at this performance level.
Layout-Dependent Loop Oscillation
Shohei Imai, Shinsuke Watanabe, Yuji Komatsuzaki, EuMIC/EuMC07 : Packaging and Multichip
Hiroyuki Okazaki, Shintaro Shinjo, Koji Yamanaka, Modules
Yoshinobu Sasaki, Hideaki Katayama, Akira Inoue; Room 15, 14:20–16:00, Tuesday 4th October 2016
Mitsubishi Electric, Japan Chair: Pierre Blondy, XLIM CNRS Universite de Limoges
EuMIC/EuMC06-2, Time: 14:40 Co-Chair: Fabio Coccetti, LAAS-CNRS
This paper proposes a unique unit cell structure of multi-finger
GaN HEMT. The structure with a 360 μm × 10 unit gate width cell Dielectric Material Characterization of High
is robust for layout-dependent loop oscillation inside the cell, and Frequency Printed Circuit Board Laminates and an
is well suited for delivering both high gain and high output power. Analysis of their Transmission Line High Frequency
Small-signal measurements show that the proposed cell exhibits
2 dB higher maximum available gain than a conventional cell. A Losses
packaged GaN HEMT based on the proposed cell delivers a 17.6 dB Brian Curran 1 , Christian Tschoban 1 , Ivan Ndip 1 ,
power gain, a 53.4 dBm output power, and a 66.5% drain efficiency
Klaus-Dieter Lang 1 , Helmut Kroener 2 , Alexander
at 2.6 GHz. To the best of authors’ knowledge, the gain is the
highest among single stage GaN HEMT amplifiers ever reported at Ippich 2 ; 1 Fraunhofer IZM, Germany; 2 Isola, Germany
the same output power range and the same frequency band. A EuMIC/EuMC07-1, Time: 14:20
Doherty power amplifier (DPA), which is fabricated with the two High frequency printed circuit board (PCB) laminates are receiving
packaged GaN HEMTs, achieves a 14.9 dB high power gain, a 51.4% increased attention due to applications in the K/Ka and Q/V
drain efficiency, a -50.3 dBc ACLR at a 48.9 dBm (78 W) average bands. As a result, the extraction of electrical properties for the
output power. applications in these bands is increasingly important. Material
Linearity Enhancement in CMOS Power Amplifier properties at 60GHz, 77GHz, and 81GHz were extracted for four
glass reinforced thermoset and one polytetrafluoroethylene (PTFE)
Design by Using Varactor-Embedded Output material. The attenuation of transmission lines on these materials
Matching Network was also analyzed, taking into account the dielectric loss properties
as well as processing tolerances and surface roughness. The results
Chenxi Zhai, Kwok-Keung M. Cheng; Chinese
show that mechanical properties of materials, for example the
University of Hong Kong, China adhesion, will indirectly affect the high frequency losses with their
EuMIC/EuMC06-3, Time: 15:00 effects on the conductor cross-sections and must be considered
This paper presents a novel and compact linearization technique during the design of high speed and high frequency systems.
for CMOS RF power amplifier (PA) realization. To enhance linearity
56
EuMC 2016 4–6 October 2016 London, UK
Interposer Based on Metallic-nanowire-Membrane RF components, the substrate must also be printed. 3D printing
(MnM) for mm-Wave Applications of polymers can be an ideal mechanism for printing substrates,
however typically such materials cannot handle high sintering
M.V. Pelegrini 1 , J.M. Pinheiro 1 , L.G. Gomes 1 , G.P. temperatures (>150 ◦ C) required for nanoparticles based metallic
Rehder 1 , A.L.C. Serrano 1 , Florence Podevin 2 , Philippe inks. In this work, an all-inkjet printed process is demonstrated
Ferrari 2 ; 1 Universidade de São Paulo, Brazil; that utilizes 3D inkjet printing of a UV-cured dielectric material
2
IMEP-LAHC, France in combination with the printing of a particle free conductive
silver organo-complex (SOC) ink for realization of inductors and
EuMIC/EuMC07-2, Time: 14:40
capacitors. The processing temperature does not exceed 80 ◦ C and
In this paper, an innovative mm-wave technology platform is pre- still state of the art conductivity of 1×107 S/m is achieved. Both
sented based on the metallic-nanowire-membrane (MnM). Here, the the conductive ink and dielectric have roughness values under 500
interposer with the most basic components are demonstrated: high nm. The inductor and capacitor exhibit quality factors of 8 and 20
performance TSVs and transmission lines showing a wide range respectively in the high MHz and GHz regime.
of Zc. It was shown that it is possible to fabricate transmission
lines with low and high characteristic impedances, varying from
5 Ω to 140 Ω. Highly miniaturized transmission lines can also EuRAD/EuMC01 : Novel Radar Front-End
be obtained with high quality factor (greater than 30). TSVs were Concepts
fabricated with small footprint (30 μm × 20 μm) and low losses Room 7, 09:00–10:40, Thursday 6th October 2016
(0.05 dB/transition). These preliminary results show the promising Chair: Alexander Kölpin, FAU Erlangen
potential of the MnM platform for the development of mm-wave Co-Chair: Alessio Balleri, Cranfield University
devices that could include filters, couplers, feeding networks and
antenna arrays.
Digital True Time Delay for Pulse Correlation Radars
Differential Wideband Interconnects for Organic Markus Schartel 1 , Winfried Mayer 2 , Christian
Millimeter Wave Chip Packages: An Effort to Design Waldschmidt 1 ; 1 Universität Ulm, Germany;
2
an All-Purpose RF Chip Package Endress+Hauser, Germany
EuRAD/EuMC01-1, Time: 09:00
Franz Xaver Röhrl 1 , Johannes Jakob 1 , Werner
Bogner 1 , Daniel Hageneder 2 , Stefan Zorn 2 ; A novel concept for digital true time delay pulse correlation radars
1 using digital programmable delay lines and monolithically inte-
Technische Hochschule Deggendorf, Germany; grated radar front-ends is investigated. The effects of quantization
2
Rohde & Schwarz, Germany errors on side lobe level and deviation of beam direction due to the
EuMIC/EuMC07-3, Time: 15:00 digital true time delay lines are evaluated by numerical simulations
based on the performance of commercially available time delay
In this paper a chip package is presented that is optimized for
units.
high operation frequencies and high power applications with a
moderate number of signal paths. Using standard printed circuit To verify the simulation results, a compact 26 GHz active elec-
board (PCB) materials, the package is also very cost effective. For tronically steered linear antenna array consisting of 8 elements
radio frequency (RF) applications, the connection between chip and has been realized, which provides beamforming in both transmit
package is as important as the connection between package and and receive path. Measurement results and design details of this
baseboard. This paper presents both and shows that the package- steerable radar sensor are presented in the experimental part of
baseboard transition is dominating the insertion and return loss at this paper.
frequencies above 40 GHz, when using organic PCBs as base for the
packages. Moreover, some methods are introduced to simplify the Broadband Multifunction AESA Front-Ends: New
simulation models of organic PCB transitions. Because of the fully Requirements and Emerging Technologies
impedance controlled design process, the presented transitions
can be used from DC to 67 GHz and ensure best signal integrity. W. Gautier, W. Gruener, R. Rieger, S. Chartier; Airbus
Defence & Space, Germany
Low-Cost Antenna-in-Package Solution for 122GHz EuRAD/EuMC01-2, Time: 09:20
Radar Module Multifunction RF systems which can operate with different RF
Akanksha Bhutani 1 , Benjamin Goettel 1 , Thomas functions like radar, communication and electronic warfare offer a
variety of benefits beyond the well-known AESA (Active Electroni-
Streitz 1 , Steffen Scherr 1 , Wolfgang Winkler 2 , Thomas cally Steerable Antenna) features. To reach a sufficient technology
Zwick 1 ; 1 KIT, Germany; 2 Silicon Radar, Germany maturity to start product development a series of challenges
EuMIC/EuMC07-4, Time: 15:20 most stemming from the large required operation bandwidth
In this paper, a glob-top packaging solution using thermally con- have to be resolved. Dual-polarised low-loss apertures with array
ductive adhesive Polytec TC 430-T is demonstrated which can be grids designed for a grating lobe and scan blindness free ±60◦
adapted for mass production using standard assembly effort. The conical Field of View (FoV) at the highest operational frequency
packaging concept is first tested on two dummy chips connected by have to be considered. The active components of the AESA and
λ/2 wirebonds. Thereafter, the packaging concept is implemented especially the T/R-M are required to be power efficient over the
on a 122 GHz wirebond based Antenna-in-Package (AiP). The off- whole multifunction bandwidth and they shall be miniaturised to
chip circuitry of the AiP contains a monostatic circularly polarized fit the array grid. RF functions like high speed datalink require
(CP) microstrip patch antenna and a branchline coupler. Finally, linear high power amplification with low harmonics generation
the feasibility of realizing a 122 GHz low-cost, fully integrated, and interference suppression in receive is essential in order to
surface mountable monostatic radar sensor package is evaluated maintain performance. Enablers for such broadband AESA are
on the basis of simulations and probe based measurements carried the GaN technology for T/R-M front-end components and SiGe
out in the frequency range of 110 GHz and 170 GHz. BiCMOS technology for core chip and digital control of the T/R-M.
The paper shows the state-of-the-art technology in Europe for
multifunction RF Systems.
3D Inkjet Printed Radio Frequency Inductors and
Capacitors Square Wave Architectures for Radar-on-Chip
Mohammad Vaseem, Garret McKerricher, Atif Øystein Bjørndal 1 , Svein-Erik Hamran 1 , Tor Sverre
Shamim; KAUST, Saudi Arabia Lande 2 ; 1 FFI, Norway; 2 University of Oslo, Norway
EuMIC/EuMC07-5, Time: 15:40
EuRAD/EuMC01-3, Time: 09:40
Inkjet printing has emerged as an ideal method for the fabrication
Square waves enable radar implementation in modern digital
of low cost and efficient electronic systems. However, most of the
technology giving power-efficient, compact and flexible radar
printed designs at present utilize 2D inkjet printing of metallic
solutions. Using a simple square wave generator and a sweep
inks on conventional substrates. In order to have fully printed
threshold quantizer we can realize a PN-sequence radar as well as
57
EuMC 2016 4–6 October 2016 London, UK
a CW, SFCW, FMCW or a pulsed radar. The square wave receiver Design and Implementation of Spaceborne
can utilize a digital XOR gate as a mixer and we present post layout Terahertz Cloud Radar
simulations confirming our high level modelling.
Mingming Bian 1 , Xichao Dong 2 , Aiyan Guo 1 , Zheng
A CMOS UWB Radar Sensor for High Speed Moving Lu 1 , Kai Cui 2 , Shitao Wang 1 ; 1 China Academy of
Objects Space Technology, China; 2 Beijing Institute of
Technology, China
Seung Hwan Jung 1 , Sang Gyun Kim 2 , Woon Sung
EuRAD/EuMC02-2, Time: 09:20
Choi 2 , Ji Yeon Jeon 2 , Jeong Geun Kim 2 , Yun Seong
Spaceborne cloud radar is a kind of active remote sensing instru-
Eo 1 , Hyung Cheol Park 3 , Hyung Geol Kim 4 ; 1 Silicon ment. It can achieve all-day, all-weather continuous observations
R&D, Korea; 2 Kwangwoon University, Korea; of global cloud vertical structure and cloud liquid water, ice
3
SeoulTech, Korea; 4 LIGNEX1, Korea water content. Compared to the current millimeter-wave cloud
EuRAD/EuMC01-4, Time: 10:00 radar, terahertz cloud radar has a higher sensitivity and a shorter
wavelength which is closer to the cloud droplet size. The improved
A radar sensor for high speed moving objects is implemented sensitivity is of great significance to detect the liquid water, ice
using single chip CMOS UWB IC. To reduce the measuring and water content of clouds with much lower sensitivity of -40dBZ. In
processing time for the fast moving target, the reliable and low this paper, researches are carried out on the spaceborne terahertz
power consumed envelope detection architecture is used at the ex- cloud radar design of system parameters and hardware implemen-
pense of high resolution. The equivalent time sampling technique tation. The system demonstrations of the spaceborne cloud radar
is adopted for UWB transceiver, employing delay locked loop and are presented, giving a case of operating parameters satisfying
digitally synthesized impulse generator with 1 ns resolution to the detection requirements. The hardware implementations are
detect the fast moving target. The measured results with 4 × 1 proposed based on the radar operating parameters, along with
micro-strip patch array antennas show that the detection range is the composition and performance requirements of each hardware
from 1 m up to 4 m and the resolution is 15 cm. The scan time subsystem in detail.
over 15 m distance is expected to be less than 150 μs.
Millimeter Resolution SAR Imaging of Infrastructure
A Polarimetric 76–79GHz Radar-Frontend for Target
in the Lower THz Region Using MIRANDA-300
Classification in Automotive Use
Stephan Stanko, Stephan Palm, Rainer Sommer, Frank
Stefan Trummer 1 , Gerhard F. Hamberger 2 , Uwe
Klöppel, Michael Caris, Nils Pohl; Fraunhofer FHR,
Siart 2 , Thomas F. Eibert 2 ; 1 ASTYX Communication &
Germany
Sensors, Germany; 2 Technische Universität München, EuRAD/EuMC02-3, Time: 09:40
Germany
This paper describes the Set-up of the MIRANDA-300 street borne
EuRAD/EuMC01-5, Time: 10:20
SAR system as well as measurements and possible applications.
Autonomous driving requires precise detection of the environment The millimeter wave FMCW radar is operated at 300 GHz and
and correct classification of all targets. W-band radar technology provides a bandwidth of more than 40 GHz leading to a range
provides high accuracy object detection in all weather conditions, resolution of a few millimeters. Using new semiconductor tech-
both day and night. Target classification can be improved by nologies, the system is compact and lightweight. The transmitted
evaluating polarimetric scattering information, where it is in signal exhibits only low absorption due to smoke, fog and dust
particular promising to work with circularly polarized waves. Both and the system is independent from sunlight. Additionally, very
circular polarizations, left-handed circular (LHC) and right-handed small metallic objects as well as the roughness of streets can be
circular (RHC), are necessary with a high cross polarization dis- measured. This offers the opportunity for new applications like
crimination (XPD). A particularly high XPD can be achieved by mobile mapping, which is currently dominated by optical systems.
hollow waveguide technology. For that purpose, a radar-frontend
with corrugated horn antennas has been designed, manufactured Measurement Setup for Characterization of a Bistatic
and tested. LHC and RHC data is then entered into an algorithm
Radar Sensor for Monitoring Particulate Matter
which takes into account switched transmitter technology, fast-
ramp frequency-modulated continuous-wave (FMCW) and digital Alwin Reinhardt, Alexander Teplyuk, Michael Höft;
beamforming. Polarimetric radar images are generated, allowing Christian-Albrechts-Universität zu Kiel, Germany
for discrimination and classification of different targets.
EuRAD/EuMC02-4, Time: 10:00
Radar technology is capable of remotely sensing particulate matter
EuRAD/EuMC02 : Terahertz Radar, Sensing distributed in air. In this paper a coherent bistatic continuous wave
radar sensor operating at 94 GHz is used for the measurement
and Imaging of mass loading and flow rate of a PM10 -stream. Therefore a new
Room 8, 09:00–10:40, Thursday 6th October 2016 indoor experimental setup for generating the stream was designed
Chair: Marina Gashinova, University of Birmingham and built. We provide measurement results and discuss further
Co-Chair: Peter Gardner, University of Birmingham improvement factors.
Predicted Sensitivity of a 300GHz FMCW Radar to High Resolution Millimeter-Wave Inverse Synthetic
Pedestrians Aperture Radar Demonstrator for Security
Marina Gashinova, Edward G. Hoare, Andy Stove; Applications
University of Birmingham, UK Paweł Dzwonkowski, Piotr Samczyński, Krzysztof
EuRAD/EuMC02-1, Time: 09:00 Kulpa; Warsaw University of Technology, Poland
This paper addresses several issues which are novel in respect of EuRAD/EuMC02-5, Time: 10:20
the rapidly-evolving state of the art of low-terahertz radars: firstly, In this paper the authors present the design and implementation
the sensitivity available from currently-available radars, secondly of a high resolution millimeter-wave radar operating at 290 GHz
the likely effects of source noise and thirdly the effects of the with bandwidth up to 66.6 GHz. The high resolution capability
fact that even relatively small targets, like people, occupy more is presented. The applications of high resolution ISAR imaging
than one resolution cell, as a consequence of the high resolutions capabilities combined with properties of low terahertz radiation in
which can be used to obtain ‘quasi imaging’ performance at these security are discussed and presented.
wavelengths. The power budget for a state-of-the-art 300GHz
frequency-modulated continuous wave radar is presented, includ-
ing consideration of the effects of oscillator noise. It is shown that
the sensitivity of the system will not be significantly affected by
oscillator noise.
58
EuMC 2016 4–6 October 2016 London, UK
59
EuMC 2016 4–6 October 2016 London, UK
Michael Caris, Stephan Stanko, Winfried Johannes, 76–81GHz Fully Planar and Array Compatible LTCC
Stefan Sieger, Nils Pohl; Fraunhofer FHR, Germany Antenna Element for Automotive Radar Sensors
EuRAD/EuMC04-5, Time: 15:40
Frank Sickinger, Ernst Weissbrodt; Valeo Schalter und
The capability of identifying remote-controlled Micro Aerial Vehi-
Sensoren, Germany
cles (MAVs), which pose a growing threat on critical infrastructure
areas, is of great importance nowadays. The low cost, the easy EuRAD/EuMC05-3, Time: 15:00
handling, and a considerable payload make them an excellent Minimizing the dimension is one of the most challenging require-
tool for unwanted surveillance or attacks. Most platforms can ments for automotive radar sensor designs. Investigations for a
be equipped with all kind of sensors or, in the worst case, with very compact automotive radar antenna have been done based
explosive devices. A typical MAV is able to take off and land on TDK Low Loss LTCC. For the automotive radar band (76 – 81
vertically, to hover, and in many cases to fly forward with a high GHz), an antenna element and a via transition have been simulated,
speed. Thus, it can reach all kinds of sites in short time while the manufactured and measured.
concealed operator of the MAV is at a remote and riskless place.
In this paper we present two possible approaches for perimeter The Development of a Wideband ‘Rocket’ Phased
surveillance with radar techniques in the millimeter wave regime. Array Feed
The main task of such radars is to detect movements of targets
such as an aerial vehicle approaching a facility. The systems Alex Dunning, Mark A. Bowen, Douglas B. Hayman,
typically monitor a range of several hundred meters with up to Jeganathan Kanapathippillai, Henry Kanoniuk,
360◦ coverage and a repetition rate of a few Hertz. The low weight Robert D. Shaw, Sean Severs; CSIRO, Australia
and easy deployable sensors are ideal for various scenarios.
EuRAD/EuMC05-4, Time: 15:20
We describe a new phased array feed design. The array is com-
posed of elements based on a solid of revolution fed by twin wire
transmission lines. An infinite array model is used to simulate the
60
EuMC 2016 4–6 October 2016 London, UK
61
Author Index Arslan, Tughrul . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Artemenko, Alexey . . . . . . . . . . . . . . . . . . . . . . . .
EuMC35-3
EuMC01-1
29
4
EuRAD/EuMC05-2 60
A Asada, Tomoyuki . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC30-3 25
Abbasi, Morteza . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC36-2 30 Asadchy, Viktar . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC23-1 20
Abdelatty, Omar . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC48-1 38 Asci, Yavuz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-34 50
Abduljabbar, Ammar M. . . . . . . . . . . . . . . . . . . . EuMCPoster02-21 49 Ashida, Hiroshi . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC05-5 61
Abdullah, Badr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC04-5 7 Ashiq, Irfan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-8 47
Abe, Motomi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC11-5 12 Ašmontas, Steponas . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-33 45
Abi Hussein, Mazen . . . . . . . . . . . . . . . . . . . . . . . . EuMC10-4 11 Aubert, H. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC03-3 5
Abou Taam, Hussein . . . . . . . . . . . . . . . . . . . . . . EuMC45-4 37 EuMC48-3 39
Abrecht, Mike . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC33-1 27 EuMCPoster02-48 52
Abuelfadl, Tamer M. . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-13 48 Aufinger, Klaus . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC20-2 18
Abu Khater, Mohammad . . . . . . . . . . . . . . . . . . EuMC15-5 15 EuMC26-2 22
Acharya, N. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC05-3 7 EuMC36-1 30
Adabi, M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-1 14 Awakowicz, Peter . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC42-2 34
Afridi, Sharjeel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC13-2 13 Awny, Ahmet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-1 54
Aguilar-Lobo, L.M. . . . . . . . . . . . . . . . . . . . . . . . . . EuMC44-4 36 Ayela, Cédric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC20-2 18
Ahmad, M.M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-1 14 Ayissi Manga, Aurelien . . . . . . . . . . . . . . . . . . . . EuMCPoster02-24 49
Ahmad, Waqas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC05-1 7
EuMC23-4 21 B
Ahmed, Faisal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC36-1 30
A.J.K., Muhammad Firdaus . . . . . . . . . . . . . . . . EuMC04-4 6 Baccarelli, Paolo . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC16-5 16
EuMC27-5 23 Bader, Sebastian . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC42-5 35
Akahane, K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-4 54 Bae, Hyoung-Oh . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-43 51
Akbar, Prilando . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC03-5 59 Baer, Christoph . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC27-3 23
Baev, Andrey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC25-4 22
Alavi, Golzar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC38-1 31
EuRAD/EuMC03-2
Baharuddin, Mohd H. . . . . . . . . . . . . . . . . . . . . . . EuMC25-4 22
Albertoni, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
EuMC37-2 30
Alcón, Pablo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC01-3 4 EuMIC/EuMC01-5
Bahmanyar, Mohammad Reza . . . . . . . . . . . . . 53
EuMC34-5 29
Alderman, Byron . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC04-4 6 Bahr, Ryan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC13-5 13
Aldrigo, Martino . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-4 14 Bajon, Damienne . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC03-4 6
Al-Eryani, Jidan . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC26-2 22 EuMC25-4 22
EuMC29-2 24
Algani, Catherine . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC49-3 39
EuMC32-2 27
Alharbi, Khalid Hamed . . . . . . . . . . . . . . . . . . . . EuMC18-2 17
Bakker, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-18 48
EuMC22-3 20
Bakr, Mustafa S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC40-1 33
EuMCPoster02-25 49
Baldi, C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC04-1 59
Alhassoon, K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-9 41
Alizadeh, Peter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-37 51 Ballesteros, Jose A. . . . . . . . . . . . . . . . . . . . . . . . . EuMC33-5 28
Al-Khalidi, Abdullah . . . . . . . . . . . . . . . . . . . . . . . EuMC18-2 17 Barazzetta, Massimo . . . . . . . . . . . . . . . . . . . . . . . EuMC37-5 31
Alkhorshid, Yasamin . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-39 45 Baristiran Kaynak, C. . . . . . . . . . . . . . . . . . . . . . . EuMC14-3 14
Alothman Alterkawi, Ahmad Bader . . . . . . . EuMIC/EuMC05-4 56 Barradas, Filipe M. . . . . . . . . . . . . . . . . . . . . . . . . . EuMC10-5 11
EuMCPoster01-29 44
Al-Shamma’a, Ahmed . . . . . . . . . . . . . . . . . . . . . . EuMC04-5 7
Barth, Rainer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-1 54
Alt, Alexander . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC11-4 12
Altynnikov, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-7 41 Bartocci, Marco . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-10 41
EuRAD/EuMC03-2 59
Alvarez-Melcon, Alejandro . . . . . . . . . . . . . . . . EuMC46-5 38
Alves, F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC03-1 5 Barton, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC05-5 7
Alvseike, Ole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC04-5 7 Bashri, Mohd. Saiful Riza . . . . . . . . . . . . . . . . . . EuMC35-3 29
Amakawa, Shuhei . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC18-3 17 Baskakova, Alexandra . . . . . . . . . . . . . . . . . . . . . EuMC34-1 28
EuMCPoster01-17 42 Basmaci, Ayse Nihan . . . . . . . . . . . . . . . . . . . . . . EuMC34-2 28
Ambacher, Oliver . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC20-4 18 Bastianelli, Luca . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC37-5 31
EuMC21-5 19 Bastioli, Simone . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC13-3 13
EuMC30-1 25 Batagelj, Boštjan . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-3 54
EuMC42-1 34 Batnairamdal, Byambaakhuu . . . . . . . . . . . . . . EuMCPoster02-14 48
EuRAD/EuMC03-1 59 Battistutta, Simone . . . . . . . . . . . . . . . . . . . . . . . . EuMC09-3 10
Amendola, G. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-3 37 Baudoin, Geneviève . . . . . . . . . . . . . . . . . . . . . . . . EuMC10-4 11
Amendola, S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC47-4 38 Baum, Thomas C. . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC31-5 26
EuMCPoster02-47 52 Baumann, Benjamin . . . . . . . . . . . . . . . . . . . . . . . EuMC20-4 18
Amin, Shoaib . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC10-3 11 Bautista, Alfredo . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC04-3 55
Amor-Martin, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC25-2 21 Beach, Mark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-28 44
Anada, Tetsuo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC06-5 8 Becerra-González, J.A. . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-24 43
Andersson, K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC06-1 56 Bechir, Arafat Ousman . . . . . . . . . . . . . . . . . . . . EuMCPoster01-38 45
Ando, Makoto . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC03-5 59 Begaud, G. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-3 14
Andrews, Paul . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC42-4 35 Bekasiewicz, Adrian . . . . . . . . . . . . . . . . . . . . . . . EuMC09-5 10
Andy, Andre Sarker . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-36 50 Belenguer, Angel . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC33-5 28
Angarita, Edison Ferney . . . . . . . . . . . . . . . . . . . EuMC44-3 36 Bellion, Anthony . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-4 37
Angeletti, P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC12-2 12 Bellomi, M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC35-2 29
Anlage, Steven M. . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC37-3 31 Belov, Pavel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC39-4 32
Antar, Yahia M.M. . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC25-3 22 Beltrán Martínez, Francisco J. . . . . . . . . . . . . . EuMCPoster02-32 50
EuMC41-1 33 Benakaprasad, B. . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC22-1 19
Antonsen, Thomas M. . . . . . . . . . . . . . . . . . . . . . EuMC37-3 31 Benamara, M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC03-1 5
Anza, Sergio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC12-3 12 Bengtsson, Olof . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC21-3 19
Araki, K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC17-4 16 EuMC43-2 35
Ardenkjær-Larsen, Jan Henrik . . . . . . . . . . . . EuMCPoster02-20 48 Bensmida, Souheil . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-28 44
Ardouin, Bertrand . . . . . . . . . . . . . . . . . . . . . . . . . EuMC20-2 18 Bentini, Andrea . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-10 41
Aref, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-30 44 Berceli, Tibor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC49-3 39
Argilés, D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC12-2 12 Bernarding, J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-17 48
Ariaudo, Myriam . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC08-4 9 Besnier, P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC37-4 31
Armendariz, Unai . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-28 49 Bessaudou, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-3 14
Arnaud, E. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-5 37 Bessette, B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-3 14
Arnedo, I. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC13-4 13 Beyer, Ralf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC28-3 24
Arnieri, E. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-3 37 EuMC28-4 24
Arnold, Christian . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC28-5 24 EuMC34-4 28
Arnous, Mhd. Tareq . . . . . . . . . . . . . . . . . . . . . . . EuMC30-5 25 Bhattacharyya, Rahul . . . . . . . . . . . . . . . . . . . . . . EuMC32-4 27
Arregui, I. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC13-4 13 Bhattacharyya, Somak . . . . . . . . . . . . . . . . . . . . . EuMC31-1 26
EuMC46-2 37 Bhutani, Akanksha . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC07-4 57
Arriola, Carlos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-7 47 Bian, Mingming . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC02-2 58
Arriola, Werner . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-7 47 Biancheri-Astier, M. . . . . . . . . . . . . . . . . . . . . . . . . EuMC03-1 5
62
Bicakci, Sabri . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC39-3 32 Chandran, Anupam R. . . . . . . . . . . . . . . . . . . . . . EuMC05-2 7
Bigler, Walter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC33-1 27 EuMC38-4 31
Bila, Stéphane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC19-4 18 Chang, Da-Chiang . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-30 50
EuMC19-5 18 Chang, Wen-Chien . . . . . . . . . . . . . . . . . . . . . . . . . EuMC36-4 30
Billabert, Anne-Laure . . . . . . . . . . . . . . . . . . . . . . EuMC49-3 39 Chang, Yin-Cheng . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-30 50
Binder, Joachim R. . . . . . . . . . . . . . . . . . . . . . . . . . EuMC33-1 27 Chang, Yu-Hsin . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC15-4 15
EuMIC/EuMC05-2 55 Chani-Cahuana, Jessica . . . . . . . . . . . . . . . . . . . . EuMC10-1 11
Bjarnadottir, Stefania Gudrun . . . . . . . . . . . . . EuMC04-5 7 Charlot, S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC48-3 39
Bjørndal, Øystein . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC01-3 57 Chartier, S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC01-2 57
Blanco Granja, Angel . . . . . . . . . . . . . . . . . . . . . . EuMC15-1 14 Chattopadhyay, G. . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC04-1 59
Blau, K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-21 43 Che, Wenquan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-1 40
Blondy, Pierre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-3 14 Chen, Chun-Ping . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC06-5 8
EuMIC/EuMC02-4 53 Chen, Jixin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-5 54
Boccia, L. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-3 37 Chen, Kuan-Yu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC24-2 21
Bochtler, Ulrich . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-23 49 Chen, Wenhua . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC50-1 40
Böck, Josef . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC26-2 22 Chen, Xiaofan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC50-1 40
Boeck, Georg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC30-4 25 Chen, Yung-Wei . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC24-2 21
EuMC30-5 25 Chen, Zhi Ning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC31-2 26
EuMC43-1 35 Cheng, Kwok-Keung M. . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC06-3 56
EuMCPoster01-4 41 Cheng, Yu Jian . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC17-2 16
EuMCPoster01-27 44 Cheon, Changyul . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-35 45
EuMCPoster01-30 44 EuMCPoster02-14 48
Boegelsack, Frank . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC02-1 4 Chevalier, N. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-5 37
Boehm, Linus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC29-3 24 Chiang, Norman . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-15 42
EuMC42-5 35 Chiang, Yen-Chung . . . . . . . . . . . . . . . . . . . . . . . . EuMC15-4 15
Boer, Vincent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC35-4 29 Chieh, Jia-Chi Samuel . . . . . . . . . . . . . . . . . . . . . . EuMC07-4 9
Bogataj, Luka . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-3 54 Chinnasamy, C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-9 41
Boglione, Luciano . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC20-5 19 Chiou, Shiue-Chen . . . . . . . . . . . . . . . . . . . . . . . . . EuMC24-2 21
Bogner, Werner . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC07-3 57 Chiu, Tsenchieh . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-30 50
Bogoni, Antonella . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC03-2 59 Chizh, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC49-4 40
Boguth, Sabine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC26-2 22 Choi, Jun H. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC16-4 15
Bonache, Jordi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC06-2 8 Choi, Sun Kyu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC11-3 12
Bondu, François . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC49-1 39 Choi, Woon Sung . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC01-4 58
Bopape, Tebogo . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC24-3 21 Chou, Yu-Ting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC04-5 55
Borel, Pascal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-24 49 Choukroun, M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC04-1 59
Boria, Vicente E. . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC12-2 12 Chu, D.P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-19 43
EuMC12-3 12 Chudzik, M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC13-4 13
EuMC12-5 13 Chung, Young-seek . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-35 45
EuMC33-5 28 Cimoli, Bruno . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC15-1 14
EuMC46-2 37 Cismaru, Alina . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-4 14
Boric-Lubecke, Olga . . . . . . . . . . . . . . . . . . . . . . . . EuMC22-4 20 Cochrane, C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC04-1 59
Bösch, Wolfgang . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC05-4 56 Cojocari, Oleg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC18-1 17
Bouhier, Steve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC49-1 39 Collier, R.J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-49 52
Bousseaud, Pierre . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-14 42 Conessa, C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC03-1 5
Bouw, Diane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC06-5 56 Constable, D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC12-4 12
Bouysse, Philippe . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC15-2 15 Constantinou, Costas C. . . . . . . . . . . . . . . . . . . . EuRAD/EuMC04-2 60
Bowen, Mark A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC05-4 60 Cook, Benjamin S. . . . . . . . . . . . . . . . . . . . . . . . . . EuMC19-1 17
Bowen, Sean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-20 48 Cooper, K.B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC04-1 59
Bozzi, Maurizio . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC09-3 10 Cordeau, David . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC26-5 22
EuMC13-5 13 Costa, Filippo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC05-4 7
EuMC35-2 29 Costanzo, Alessandra . . . . . . . . . . . . . . . . . . . . . EuMC39-1 32
EuMC38-3 31 EuMCPoster01-43 46
EuMC40-4 33 Costen, Fumie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-21 49
Brazil, Thomas J. . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-5 41 Coustou, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
EuMCPoster02-48
Brebels, S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC02-4 5 Coves, Angela . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
EuMC40-4
Bressan, Marco . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC09-3 10
Craninckx, Jan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC05-3 55
Briese, G. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC04-4 60
Creagh, S.C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC37-2 30
Brochier, L. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC03-4 59
Crespo-Cadenas, C. . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-24 43
Brückner, P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC21-5 19 Crezee, J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
EuMC47-2
EuMC30-1 25 48
EuMCPoster02-18
Brunett, Joseph . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC16-4 15
Cripps, S.C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC21-4 19
Bruns, C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-17 48 EuMIC/EuMC01-3 53
Bryllert, T. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC04-3 60
Cross, A.W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-32 45
Budimir, Djuradj . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC05-1 7 Crowther-Alwyn, Laura . . . . . . . . . . . . . . . . . . . . 49
EuMCPoster02-24
EuMC23-4 21 Cruciani, Silvano . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
EuMC37-1
Bueno Diez, Miguel . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-44 52
Cseh, Tamás . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC49-3 39
Burghignoli, Paolo . . . . . . . . . . . . . . . . . . . . . . . . . EuMC16-5 16 EuRAD/EuMC02-2
Cui, Kai . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Burt, G. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC12-4 12
Cui, Tie Jun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC12-1 12
Byeon, Chul Woo . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC11-3 12
Cummins, Gerard . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-19 48
Cunha, Telmo R. . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC10-5 11
C EuMCPoster01-29 44
Curran, Brian . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC07-1 56
Calmon, P-F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC48-3 39 Curuk, Eren . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-34 50
Camiade, Marc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC06-5 56 Curutchet, Arnaud . . . . . . . . . . . . . . . . . . . . . . . . . EuMC20-2 18
Campi, Tommaso . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC37-1 30 Czylwik, Andreas . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-31 44
Capobianco, Antonio-Daniele . . . . . . . . . . . . . EuMC38-2 31
Caris, Michael . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC02-3 58 D
EuRAD/EuMC04-5 60
Carta, Corrado . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC26-3 22 Dai, Zih-Jyun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC24-2 21
Carty, Eric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC02-3 53 Dalisda, Uwe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC43-1 35
EuMCPoster01-27 44
Caspary, Reinhard . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-3 40
Dalmay, C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-3 14
Castro, Giuseppe . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC42-3 34
D’Amico, Michele . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-41 51
Celona, Luigi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC42-3 34
Dankov, Plamen I. . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC09-1 10
Čerškus, Aurimas . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-33 45 Daryoush, A.S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-9 41
Chabalko, Matthew J. . . . . . . . . . . . . . . . . . . . . . . EuMC39-2 32 Dat, P.T. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-4 54
Chae, Soo-Chang . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC39-5 32 De Angelis, Francesca . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-16 48
EuMCPoster01-44 46
63
Debaillie, Björn . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC08-1 9 Fekete, Gábor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC49-3 39
Deborgies, F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC15-3 15 Feliziani, Mauro . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC37-1 30
Delage, S.L. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC04-2 55 Feng, Wenjie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-1 40
Delattre, Anastasia . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-24 49 Fengler, Malte . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC38-5 32
Delhote, Nicolas . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC19-4 18 Feresidis, Alexandros . . . . . . . . . . . . . . . . . . . . . . EuMC16-2 15
EuMC19-5 18 Fernandez, Marcos D. . . . . . . . . . . . . . . . . . . . . . . EuMC33-5 28
De Matos, Magali . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC20-2 18 Ferrari, Philippe . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC04-3 55
Deng, Marina . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC20-2 18 EuMIC/EuMC07-2 57
Deng, Tianwei . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC31-2 26 Ferrero, F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC03-4 59
Dengler, R. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC04-1 59 Ferretti, Jérôme . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC21-3 19
De Santis, Giovanni . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-10 41 Feuray, William . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC19-5 18
Deslandes, D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC01-5 4 Fezai, F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-5 37
Desmulliez, Marc P.Y. . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-19 48 Fhager, Andreas . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC35-5 29
Desset, Claude . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC08-1 9 Figueiredo, José . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC18-2 17
Dey, Shuvashis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC32-4 27 Fijalkow, Inbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC08-4 9
EuMCPoster02-45 52 Fink, Thomas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC33-1 27
Dey, Sukomal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC50-3 40 Fırat, Gülfem Balasu . . . . . . . . . . . . . . . . . . . . . . . EuMC24-4 21
Diamanti, Riccardo . . . . . . . . . . . . . . . . . . . . . . . . EuMC37-5 31 Fischer, Andreas . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC38-5 32
Dicandia, Francesco Alessio . . . . . . . . . . . . . . . EuMC23-3 20 Fischer, M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-6 41
Di Donato, Andrea . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-16 48 Fitzgerald, Padraig . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC02-3 53
Dieckman, Brian . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC19-1 17 Follmann, R. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC15-3 15
Diet, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC03-1 5 Fourmann, J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-48 52
Disserand, Anthony . . . . . . . . . . . . . . . . . . . . . . . EuMC15-2 15 Frank, Tobias . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC03-5 6
Djerafi, Tarek . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC03-2 5 Franke, Sebastian . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-3 40
EuMC44-5 36 Franklin, Rhonda . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-10 47
Domingue, F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC01-5 4 Frégonèse, Sébastien . . . . . . . . . . . . . . . . . . . . . . EuMC20-2 18
Donaldson, C.R. . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-32 45 Freundorfer, Alois P. . . . . . . . . . . . . . . . . . . . . . . . EuMC25-3 22
Dong, Ruibing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC18-3 17 EuMC41-1 33
Dong, Xichao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC02-2 58 Friedrich, Aline . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC38-5 32
Dong, Yunfeng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC01-2 4 Friesicke, C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC21-5 19
Donnan, Robert . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-36 50 Fritsche, David . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC26-3 22
Doumanis, Efstratios . . . . . . . . . . . . . . . . . . . . . . EuMC12-5 13 Fujii, Kazunobu . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC30-3 25
EuMC40-2 33 Fujio, Shunsuke . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC05-5 61
Dragoman, Mircea . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-4 14 Fujishima, Minoru . . . . . . . . . . . . . . . . . . . . . . . . . EuMC18-3 17
Drobotun, Nikolay . . . . . . . . . . . . . . . . . . . . . . . . . EuMC11-1 11 Fukumoto, Hiroshi . . . . . . . . . . . . . . . . . . . . . . . . . EuMC30-2 25
Drysdale, Timothy D. . . . . . . . . . . . . . . . . . . . . . . EuMC41-3 34 Furqan, Muhammad . . . . . . . . . . . . . . . . . . . . . . . EuMC36-1 30
EuMCPoster02-27 49 Fuscaldo, Walter . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC16-5 16
D.S., Chandu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC22-2 19
Du, Niantong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-40 51 G
Dubrovka, Rostyslav . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-36 50
Dudley, Richard . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC42-4 35 Gagarin, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-7 41
Duff, Christopher I. . . . . . . . . . . . . . . . . . . . . . . . . EuMC04-4 6 Gajaweera, Ruwan . . . . . . . . . . . . . . . . . . . . . . . . . EuMC13-1 13
EuMC27-5 23 Galdeano, Jaione . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC12-5 13
Dumanli, Sema . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC01-2 52 Galli, Alessandro . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC16-5 16
Dunning, Alex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC05-4 60 Gammino, Santo . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC42-3 34
Durden, S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC04-1 59 Gandini, E. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC04-1 59
Dzwonkowski, Paweł . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC02-5 58 Gao, Chu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-2 36
Gao, Steven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC17-1 16
García, José A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC10-2 11
E García-Álvaro, Sonia . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC04-1 54
Ebert, Alexander . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC04-2 6 García-Carrenõ, Pablo . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC04-1 54
Eblabla, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC22-1 19 Garcia-Castillo, L.E. . . . . . . . . . . . . . . . . . . . . . . . . EuMC25-2 21
Eden, J. Gary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC33-2 27 Garcia-Doñoro, D. . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC25-2 21
Efendowicz, Avner . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-12 42 Garcia Lopez, Iria . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-1 54
Ehrich, S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC15-3 15 Gardner, Peter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC16-2 15
Eibert, Thomas F. . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-23 49 Garner, J.R. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-32 45
EuRAD/EuMC01-5 58 Gashinova, Marina . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC02-1 58
Eissa, M.H. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-5 14 EuRAD/EuMC04-2 60
Elabyad, Ibrahim A. . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-17 48 Gautier, W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC01-2 57
El Bouayadi, T.O. . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC04-1 59 Gaydecki, P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC05-5 7
Elgaid, K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC22-1 19 Gebhardt, Patrik . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC20-3 18
Ellinger, Frank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC26-3 22 Gebremicael, Kibrom N. . . . . . . . . . . . . . . . . . . . EuMCPoster01-28 44
Enokihara, Akira . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC11-2 11 Geck, Bernd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC38-5 32
Enomoto, Jun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-26 44 Geijsen, E.D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC47-2 38
Eo, Yun Seong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC01-4 58 Gellersen, Frauke K.H. . . . . . . . . . . . . . . . . . . . . . EuMC19-2 17
Eriksson, Thomas . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC10-1 11 Genovesi, Simone . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC05-4 7
Erni, Daniel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-17 48 EuMC23-3 20
Ernst, Christoph . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC28-3 24 Gentili, Fabrizio . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC05-4 56
EuMC28-4 24 Geschke, Riana . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC07-5 9
EuMC34-4 28 Ghafarian, Naimeh . . . . . . . . . . . . . . . . . . . . . . . . . EuMC49-5 40
Esparza, Nuria . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC01-3 4 Ghelfi, P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC03-2 59
EuMC34-5 29 Ghorbani, Kamran . . . . . . . . . . . . . . . . . . . . . . . . . EuMC31-5 26
Espin-Lopez, P.F. . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC35-2 29 Ghosh, Debapratim . . . . . . . . . . . . . . . . . . . . . . . . EuMC20-1 18
Esteban, Héctor . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC33-5 28 Ghosh, Saptarshi . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC31-1 26
Everard, Jeremy . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC13-1 13 Gibson, Andrew . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-22 49
Gibson, Hugh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC18-1 17
F Gil, Jordi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC12-3 12
Gilabert, Pere L. . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC10-2 11
Faci, Salim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC49-3 39
Gimeno, B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC12-2 12
Faerber, Julia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-19 48
Gjurovski, Peco . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-2 40
Fager, Christian . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC10-1 11
Glynn, David . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC01-1 52
Farina, Marco . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-16 48
Goettel, Benjamin . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC07-4 57
Farrell, Ronan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC04-1 6
EuMC06-3 8 EuRAD/EuMC05-1 60
EuMC06-4 8 Goggin, Raymond . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC02-3 53
EuMC43-3 35 Gold, G. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC33-4 28
Feger, Reinhard . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC36-1 30 Golenkov, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-34 45
Fei, Peng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-31 50 Gomes, L.G. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC07-2 57
64
Gómez-García, Roberto . . . . . . . . . . . . . . . . . . . . EuMC40-3 33 Henneberger, R. . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC27-2 23
EuMC46-4 37 EuMC30-1 25
Gómez-Tornero, José Luis . . . . . . . . . . . . . . . . . EuMC41-4 34 Henry, D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC03-3 5
Gomez-Torrent, A. . . . . . . . . . . . . . . . . . . . . . . . . . EuMC13-4 13 Herrán, Luis Fernando . . . . . . . . . . . . . . . . . . . . . EuMC01-3 4
EuMC46-2 37 EuMC34-5 29
Gonzalez, D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC04-1 59 Herrmann, T. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-17 48
Goodman, Joel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC20-5 19 Herschel, R. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC04-4 60
Göritz, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC02-5 53 Hershberg, Benjamin . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC05-3 55
Gorur, Ali Kursad . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC34-2 28 Hesselbarth, Jan . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC38-1 31
Goussetis, George . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC12-5 13 Heuer, C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-38 51
EuMC40-2 33 Heuermann, Holger . . . . . . . . . . . . . . . . . . . . . . . . EuMC47-1 38
EuMC41-4 34 Hieda, Morishige . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-41 46
Gradauskas, Jonas . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-33 45 Himeno, Ryutaro . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-21 49
Gradoni, Gabriele . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC32-2 27 Hirabe, Masashi . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC08-5 10
EuMC37-2 30 Hirokawa, Jiro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC03-5 59
EuMC37-3 31 Hirose, Masanobu . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC29-5 25
Gramond, René-Philippe . . . . . . . . . . . . . . . . . . . EuMC19-5 18 Hitzler, Martin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC29-3 24
Grasso, Leandro . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC48-5 39 EuMC42-5 35
Greedy, S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC37-2 30 Hjeij, F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-3 14
Gregory, Andrew . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC42-4 35 Hoare, Edward G. . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC02-1 58
Gropp, S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-6 41 EuRAD/EuMC04-2 60
Gros, Jean Baptiste . . . . . . . . . . . . . . . . . . . . . . . . EuMC03-4 6 Hoffmann, M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-6 41
Gruener, W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC01-2 57 Hoffmann, Thomas . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-2 54
Gruner, Daniel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC11-4 12 Höft, Michael . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC02-4 58
Gružinskis, Viktoras . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-33 45 Holzer, Kyle D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC27-4 23
Grys, David-Benjamin . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-13 42 EuRAD/EuMC05-5
Honda, Atsushi . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Grzeskowiak, M. . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC03-1 5
Hong, Jiasheng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC07-1 8
Gu, Sijia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC29-1 24
EuMC46-3 37
Guan, J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-30 44
Hong, Wei . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-5 54
Guan, Ning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC01-4 4
Guerra, Ranieri . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC48-5 39 Honjo, Kazuhiko . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC36-3 30
Guglielmi, Marco . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC12-5 13 EuMCPoster01-26 44
Horibe, Masahiro . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-42 46
Guha, S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-5 14
Horiguchi, Kenichi . . . . . . . . . . . . . . . . . . . . . . . . . EuMC30-3 25
Guiney, I. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC22-1 19
Hosono, Ryouhei . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC01-4 4
Gulan, Heiko . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC03-1 59
Hossain, Maruf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC26-1 22
EuRAD/EuMC05-1 60
EuMC26-4 22
Gundel, H. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-9 41 Hou, Debing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-5 54
Guo, Aiyan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC02-2 58 Hou, Li-Wei . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC18-5 17
Guo, Weihua . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-31 50 Hsieh, ChaoPing . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-30 50
Gustafsson, D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC06-1 56 Huang, Guo-Wei . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC48-2 39
Guyette, Andrew C. . . . . . . . . . . . . . . . . . . . . . . . . EuMC46-1 37 Huang, Tao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-35 50
Guzmán-Quirós, Raúl . . . . . . . . . . . . . . . . . . . . . . EuMC41-4 34 Huang, Yang-Chih . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-5 47
Gwak, Donghyuk . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-43 51 Huang, Yong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-33 50
Huggard, Peter G. . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC04-4 6
H Hühn, Florian . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC43-5 35
Hageneder, Daniel . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC07-3 57 Hulshof, M.C.C.M. . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC47-2 38
Haider, Michael . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC25-4 22 EuMCPoster02-18 48
Haigh, Arthur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-22 49 Hülsmann, Axel . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC20-4 18
Hall, B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC12-4 12 EuMC42-1 34
Hallal, Ayman . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC49-1 39 Humphreys, C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC22-1 19
Hamberger, Gerhard F. . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC01-5 58 Hunter, Ian C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC13-2 13
Hamid, M.R. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC50-2 40 EuMC28-1 23
Hamran, Svein-Erik . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC01-3 57 EuMC40-1 33
Han, Seog-Tae . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-32 50 EuMC46-5 38
Han, Xu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Huurinainen, J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC40-2 33
EuMC01-4
Hanberg, Peter Jesper . . . . . . . . . . . . . . . . . . . . . 4 Hwang, James C.M. . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-16 48
EuMC01-2
Hancock, Christopher P. . . . . . . . . . . . . . . . . . . . 38 Hyvert, Jérémy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC26-5 22
EuMC47-3
Händel, Peter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC10-3 11
Hanham, S.M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-1 14
I
Hannachi, C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-16 42 Ianconescu, Reuven . . . . . . . . . . . . . . . . . . . . . . . . EuMC25-1 21
Hansen, Nils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC36-5 30 Ibrahim, Mohamed I. . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-13 48
Hao, Zhang-Cheng . . . . . . . . . . . . . . . . . . . . . . . . . EuMC02-2 4 Ibrahim, Sarah Adel . . . . . . . . . . . . . . . . . . . . . . . EuMC04-1 6
Hara, Shinsuke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC18-3 17 EuMC06-3 8
Harati, P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC27-2 23 EuMC43-3 35
Haridas, Nakul . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC35-3 29 Ichijo, Jun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC29-5 25
Häring, Lars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-31 44 Ichinose, Kento . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-2 46
Hashimoto, O. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC17-4 16 Iglesias, Petronilo Martin . . . . . . . . . . . . . . . . . . EuMC28-3 24
Hattenhorst, Birk . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC27-3 23 EuMC28-4 24
Hayman, Douglas B. . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC05-4 60 EuMC34-4 28
He, Tianhao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC01-1 52 EuMC46-3 37
He, W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-32 45 Ilgaz, Mehmet Alp . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-3 54
He, Yingyi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-1 36 Imai, Shohei . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC30-2 25
He, Yudong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-40 51 EuMIC/EuMC06-2 56
He, Yue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC18-5 17 Inoue, Akira . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC30-2 25
Hein, Matthias A. . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC04-2 6 EuMC30-3 25
EuMCPoster01-6 41 EuMIC/EuMC06-2 56
EuMCPoster01-21 43 Ippich, Alexander . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC07-1 56
Heinemann, Bernd . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-1 54 Isaksson, Magnus . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC10-3 11
Heinrich, Wolfgang . . . . . . . . . . . . . . . . . . . . . . . . EuMC21-3 19 Ishikawa, Ryo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC36-3 30
EuMC26-1 22 EuMCPoster01-26 44
EuMC26-4 22 Ishikawa, Shohei . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC05-5 61
EuMC43-2 35 Iskandar, Zyad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC04-3 55
EuMC43-5 35 Islam, Md. Mazidul . . . . . . . . . . . . . . . . . . . . . . . . EuMC32-3 27
EuMC46-5 38 Ismail, S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC05-5 7
EuMIC/EuMC03-2 54 Ito, Yuji . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-17 42
Heirons, J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC05-3 7 Itoh, Tatsuo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC16-1 15
Helmreich, K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC33-4 28
65
Itoh, Yasushi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-11 42 Kienemund, Daniel . . . . . . . . . . . . . . . . . . . . . . . . EuMC33-1 27
Kim, Choul-Young . . . . . . . . . . . . . . . . . . . . . . . . . EuMC11-3 12
J Kim, Dae-Hyun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC39-5 32
Kim, Hyung Geol . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC01-4 58
Jacob, Arne F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC19-2 17
EuMC36-5 30 Kim, Ihn Seok . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-7 47
EuMC40-5 33 Kim, Jangheon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC06-4 56
Jakob, Johannes . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC07-3 57 Kim, Jeong Geun . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC01-4 58
Jakoby, Rolf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC03-5 6 Kim, Sang Gyun . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC01-4 58
EuMC21-3 19 Kim, Sanghoon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC41-5 34
EuMC33-1 27 Kissinger, Dietmar . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-5 14
EuMIC/EuMC05-2 55 Kitahara, D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC17-4 16
Jamal, F.I. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-5 14 Kitsunezuka, Masaki . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC05-1 55
Jang, Jihyeon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-35 45 Klasmann, Paul . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC19-3 18
Jardel, Olivier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC15-2 15 Klehr, Andreas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-2 54
Jaschke, Thomas . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC40-5 33 Klein, N. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-1 14
Jauberteau, M.O. . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-3 14 Klenner, Mathias . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC42-1 34
Jecko, Bernard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-4 37 Klöppel, Frank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC02-3 58
Jenabi, S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC16-3 15 Knapp, Herbert . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC26-2 22
Jensen, Jesper Bevensee . . . . . . . . . . . . . . . . . . . EuMC15-1 14 Kneller, James William Ewart . . . . . . . . . . . . . . EuMCPoster02-36 50
Jeon, Ji Yeon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC01-4 58 Knoll, Dieter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-1 54
Jia, Chenwei . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-5 54 Knowles, James F. . . . . . . . . . . . . . . . . . . . . . . . . . EuMC27-5 23
Jian, Li-Yi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC24-2 21 Kocer, Hasan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC31-3 26
Jiang, J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC02-1 53 Kohler, Christian . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC33-1 27
Jiang, Xun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-33 50 EuMIC/EuMC05-2 55
Jin, Xin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-16 48 Koizumi, Souta . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-23 43
Jo, Gweondo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-43 51 Kojima, Chikara . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC05-5 61
Johannes, Winfried . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC04-5 60 Kok, H.P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC47-2 38
Johannesson, Kristjan Sundgaard . . . . . . . . . EuMC35-4 29 EuMCPoster02-18 48
Johansen, Tom K. . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC01-2 4 Kolff, M.W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC47-2 38
EuMC15-1 14 EuMCPoster02-18 48
Jokanovic, Branka . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC22-4 20 Kolpatzeck, Kevin . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-31 44
Jolly, Nicolas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC19-4 18 Komatsuzaki, Yuji . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC06-2 56
Joram, Niko . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC26-3 22 Komkov, Sergey . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-46 52
Juang, Ying-Zong . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC48-2 39 Konpang, Jessada . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC28-1 23
Jun, S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC05-3 7 Konrath, Willibald . . . . . . . . . . . . . . . . . . . . . . . . . EuMC04-2 6
Jung, Seung Hwan . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC01-4 58 Konstantinidis, Konstantinos . . . . . . . . . . . . . EuMC16-2 15
Korostynska, Olga . . . . . . . . . . . . . . . . . . . . . . . . . EuMC04-5 7
K Kosaka, Naoki . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC30-3 25
Kabalan, Ali . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC49-3 39 Kosmopoulos, Savvas . . . . . . . . . . . . . . . . . . . . . . EuMC12-5 13
Kahil, Si Abed Karim . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-37 45 Kotelnikov, I. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-7 41
Kalinikos, B.A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-18 43 Koul, Shiban K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC50-3 40
Kallfass, I. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC27-2 23 Koziel, Slawomir . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC09-5 10
EuMC30-1 25 Kozlov, Dmitry S. . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC33-3 27
Kanapathippillai, Jeganathan . . . . . . . . . . . . . EuRAD/EuMC05-4 60 Kozyrev, Andrey . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-7 41
Kanno, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC49-2 39 Kracek, Jan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC32-5 27
EuMIC/EuMC03-4 54 Krauß, Peter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC28-3 24
EuMC28-4 24
Kanoniuk, Henry . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC05-4 60
EuMC34-4 28
Kapitanova, Polina . . . . . . . . . . . . . . . . . . . . . . . . . EuMC39-4 32 Kreouzis, Theo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-36 50
Karimian, Noushin . . . . . . . . . . . . . . . . . . . . . . . . . EuMC05-5 7 Krishnamoorthy, K. . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-29 50
EuMCPoster02-22 49 Kroener, Helmut . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC07-1 56
Karimian, S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC05-5 7
Kroh, Marcel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-1 54
EuMC16-3 15
Karmakar, Nemai Chandra . . . . . . . . . . . . . . . . EuMC32-4 27 Kronberger, Rainer . . . . . . . . . . . . . . . . . . . . . . . . EuMC31-4 26
EuMCPoster02-45 52 Krozer, Viktor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC26-1 22
Karpuz, Ceyhun . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC24-4 21 EuMC26-4 22
EuMC34-2 28 Kühn, Jutta . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC20-4 18
Karthikeyan, S.S. . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC22-2 19 EuMC42-1 34
Kulpa, Krzysztof . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC02-5 58
Kasamatsu, Akifumi . . . . . . . . . . . . . . . . . . . . . . . EuMC18-3 17
Kashima, K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-4 54 Kumar, Girish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC20-1 18
Kassa, Wosen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC49-3 39 Kumar, Nagendra . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-22 43
Kässer, Tobias . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Kunihiro, Kazuaki . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC05-1 55
EuMC04-2
Katayama, Hideaki . . . . . . . . . . . . . . . . . . . . . . . . . EuMC30-2 25 Kunii, Tetsuo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC30-2 25
EuMC30-3 25 Kuri, M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC03-1 59
EuMIC/EuMC06-2 56 Kuriyama, Akira . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC03-3 59
Katayama, Kosuke . . . . . . . . . . . . . . . . . . . . . . . . . EuMC18-3 17 Kuroda, Hiroshi . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC03-3 59
Kato, Katsuya . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC30-3 25 Kurokawa, Satoru . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC29-5 25
Kato, Yuto . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-42 46 Kurt, Hamza . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC31-3 26
Katzer, Jens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-1 54 Kuwahara, Yoshihiko . . . . . . . . . . . . . . . . . . . . . . EuMC35-1 29
Kawai, Tadashi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC11-2 11 Kuznetsov, Yury . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC03-4 6
Kawanishi, T. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC49-2 39 EuMC25-4 22
EuMIC/EuMC03-4 54 EuMC32-2 27
Kawasaki, Shigeo . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC48-4 39 Kwak, Changsoo . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC34-3 28
Kaynak, Mehmet . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-3 14 Kyriacou, Michalis . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-28 44
EuMIC/EuMC02-5 53
EuMIC/EuMC03-1 54
L
Keimel, Chris . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC02-2 53 Labate, Giuseppe . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC41-2 33
Kersten, O. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC15-3 15 Lachner, Rudolf . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC26-2 22
Kgwadi, Monageng . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-25 49 Lager, Ioan E. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC17-3 16
Khalid, Ata . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC22-3 20 Laghezza, Francesco . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC03-2 59
Khan, Muhammad Abdullah . . . . . . . . . . . . . . EuMCPoster01-14 42 Lähderanta, E. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-11 47
Khan, Zain Ahmed . . . . . . . . . . . . . . . . . . . . . . . . . EuMC10-3 11 Lai, Qinghua . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-2 36
Khang, Seung-Tae . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC39-5 32 Lal, Deeksha . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC36-2 30
EuMCPoster01-44 46 Lalloué, F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-3 14
Khanna, A.P.S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-8 47 Lan, Yu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC28-2 24
Kholodnyak, Dmitry . . . . . . . . . . . . . . . . . . . . . . . EuMC34-1 28 Lancaster, Michael J. . . . . . . . . . . . . . . . . . . . . . . . EuMC19-3 18
Khoroshilov, Evgeny . . . . . . . . . . . . . . . . . . . . . . . EuMC11-1 11 EuMIC/EuMC01-1 52
66
Lande, Tor Sverre . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC01-3 57 Lu, Zheng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC02-2 58
Landin, Per N. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC10-1 11 Lubecke, Victor M. . . . . . . . . . . . . . . . . . . . . . . . . . EuMC22-4 20
Landsberg, Naftali . . . . . . . . . . . . . . . . . . . . . . . . . EuMC22-5 20 Luc, J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-48 52
Lang, Klaus-Dieter . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC07-1 56 Lučun, Andžej . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-33 45
Lang, S.A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC04-4 60 Lugo-Alvarez, Jose . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC04-3 55
Lanteri, J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC03-4 59 Luhaib, Saad W.O. . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC40-1 33
Lapierre, Luc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC15-2 15 Lunde, Kathrine . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC04-5 7
Las-Heras, Fernando . . . . . . . . . . . . . . . . . . . . . . . EuMC01-3 4 Lv, Fang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC02-3 5
EuMC34-5 29 Lysiuk, I. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-34 45
Laso, M.A.G. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC13-4 13
EuMC46-2 37 M
Lasri, Tuami . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC29-1 24 Ma, Junmei . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-2 36
Laurent, Sylvain . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-37 45 Ma, Zhewang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC06-5 8
Lavayssiére, M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-48 52 Maassen, Daniel . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC43-1 35
Lavrador, Pedro M. . . . . . . . . . . . . . . . . . . . . . . . . . EuMC10-5 11 EuMCPoster01-27 44
Leal-Sevillano, Carlos A. . . . . . . . . . . . . . . . . . . . EuMC09-2 10 EuMCPoster01-30 44
Le Bihan, Y. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC03-1 5 Macchiarella, Giuseppe . . . . . . . . . . . . . . . . . . . . EuMC24-1 21
Lee, Boyoung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC34-3 28 Macfarlane, D.G. . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC04-3 60
Lee, Chanjoon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-10 47 Machac, Jan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC32-5 27
Lee, Eun-Gyu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC11-3 12 Macheret, Sergey O. . . . . . . . . . . . . . . . . . . . . . . . . EuMC33-2 27
Lee, Jae-Eun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC11-3 12 Madero-Ayora, M.J. . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-24 43
Lee, Jeong Ho . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC11-3 12 Maehara, Hiroaki . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC30-2 25
Lee, Jiyeon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC41-5 34 Maestrojuan, I. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC02-5 5
Lee, Jong Wook . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-7 47 Mahé, Françoise . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC24-5 21
Lee, Jooseok . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC11-3 12 Mahmoud, Samir F. . . . . . . . . . . . . . . . . . . . . . . . . EuMC25-3 22
Lee, Jung-Nam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-43 51 EuMC41-1 33
Lee, Juseop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC34-3 28 Mai, Andreas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC02-5 53
Lee, Seungku . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-8 41 EuMIC/EuMC03-1 54
Lee, Tae-Hak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC34-3 28 Mai, Christian . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-1 54
Lee, Young-Ho . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-43 51
Maier, T. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC21-5 19
Le Foulgoc, Jean-Marc . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-26 49
Majedi, Amir Hamed . . . . . . . . . . . . . . . . . . . . . . . EuMC49-5 40
Lefrançois, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-48 52
Majid, H.A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC50-2 40
Leidenhed, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC06-1 56 Majied, Soran . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC26-2 22
Le Méhauté, Simon . . . . . . . . . . . . . . . . . . . . . . . . . EuMC49-1 39 Majumder, Basudev . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-29 50
Lemoine, C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC37-4 31 Makimoto, Mitsuo . . . . . . . . . . . . . . . . . . . . . . . . . EuMC32-1 26
Leonardi, Ornella . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC42-3 34 Malallah, Y. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-9 41
Lesénéchal, Dominique . . . . . . . . . . . . . . . . . . . . EuMC29-2 24 Malavolta, Marco . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-16 48
EuMC32-2 27 Malekabadi, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC16-3 15
Leuther, Arnulf . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC03-1 59 Malherbe, J.A.G. . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC24-3 21
Lewark, U.J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC15-3 15 Mallach, Malte . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC20-3 18
Li, Changzhi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC47-5 38 EuMCPoster01-13 42
Li, Hao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC26-2 22 Malmstrom, M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC06-1 56
Li, J.F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-19 43 Malyshev, S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC49-4 40
Li, Jian-Yu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC36-4 30 Mandel, Christian . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC03-5 6
Li, Jiming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC03-2 5 Mansour, Raafat R. . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-20 43
Li, Songhui . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC26-3 22 EuMIC/EuMC02-1 53
Li, X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC22-1 19 Manstretta, D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC38-3 31
Li, Xiaoqiang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC16-1 15 Mansutti, Giulia . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC38-2 31
Li, Zhen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-22 49 Manzari, S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-47 52
Li, Zhengyi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC05-5 61 Manzoni, Andrea . . . . . . . . . . . . . . . . . . . . . . . . . . 51
EuMCPoster02-41
Lia, E. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC15-3 15 Mao, Chunxu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC17-1 16
Liero, Armin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-2 54 Mao, Junfa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC07-3 9
Lim, Jeong-Taek . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC11-3 12 EuMC09-4 10
Lin, Chin-Yi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-5 47 Mariani Primiani, Valter . . . . . . . . . . . . . . . . . . . EuMC37-5 31
Lin, Kuei-Cheng . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC48-2 39 Marinescu, M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-9 41
Lin, Ta-Yeh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-30 50 Marrocco, G. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC47-4 38
Lin, Tianjun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC29-1 24 EuMCPoster02-47 52
Lin, Yu-Hsuan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC04-5 55 Martellosio, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC35-2 29
Lindenmeier, Stefan . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-38 51 Martens, J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC29-4 25
EuMCPoster02-44 52 Martin, Audrey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC15-2 15
Ling, Feng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC09-4 10 Martín, Ferran . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC06-2 8
Lischke, Stefan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-1 54 Martínez, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC02-5 5
Lissorgues, G. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC03-1 5 Martinez, J.D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC46-2 37
EuMC47-4 38 Martinez Mendoza, Monica . . . . . . . . . . . . . . . . EuMC46-5 38
Litvinenko, Artem . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-46 52 Martynov, M.I. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-18 43
Liu, Hairui . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC04-4 6 Maru, Tsuguo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC08-5 10
Liu, Jingping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC02-3 5 Mascali, David . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC42-3 34
Liu, Ruizhi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC04-3 6 Maslennikov, Roman . . . . . . . . . . . . . . . . . . . . . . EuMC01-1 4
Liu, Weitian . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-5 54 EuRAD/EuMC05-2 60
Liu, Youjiang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-40 51 Mason, Alex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC04-5 7
Liu, Zhenhua . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-2 36 Masood, Rizwan . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC23-2 20
Llombart, Nuria . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC17-3 16 Masotti, Diego . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC39-1 32
EuRAD/EuMC04-1 59 Massoni, Enrico . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC40-4 33
Lo Hine Tong, Dominique . . . . . . . . . . . . . . . . . EuMCPoster02-24 49 Mastri, Franco . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-43 46
EuMCPoster02-26 49 Matekovits, Ladislau . . . . . . . . . . . . . . . . . . . . . . . EuMC41-2 33
Long, Jiang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC41-5 34 Matsumoto, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-4 54
Loo-Yau, J.R. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC44-4 36 Matters-Kammerer, Marion K. . . . . . . . . . . . . . EuMC18-4 17
Lopetegi, T. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC13-4 13 Maune, Holger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC33-1 27
López Cuenca, Daniel . . . . . . . . . . . . . . . . . . . . . . EuMC38-1 31 Maurer, Linus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC26-2 22
López-Espí, Pablo-Luis . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-32 50 Mavridou, Marina . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC16-2 15
EuMIC/EuMC04-1 54 Mayer, Winfried . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC42-5 35
López-Fernández, José A. . . . . . . . . . . . . . . . . . EuMCPoster02-32 50 EuRAD/EuMC01-1 57
EuMIC/EuMC04-1 54 Mazanek, Milos . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC32-5 27
López-Pérez, José A. . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC04-1 54 Mazzanti, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC35-2 29
López Ruiz, Samuel . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-32 50 McDaid, Padraig . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC02-3 53
Loracher, S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-21 43 McElhinney, P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-32 45
Lu, Bin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC18-5 17 McKerricher, Garret . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC07-5 57
67
McLeod, Christopher N. . . . . . . . . . . . . . . . . . . . EuMIC/EuMC01-5 53 Nassar, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-38 51
Medina, Francisco . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC06-1 8 Nasser, H. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC37-2 30
Mei, Tengda . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC28-2 24 Ndip, Ivan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC07-1 56
Melazzi, Davide . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC38-2 31 Ndoye, M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC01-5 4
Meliani, C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-5 14 Negra, Renato . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-2 40
Mellonie, Andrew . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC42-4 35 EuMCPoster01-14 42
Memarian, Mohammad . . . . . . . . . . . . . . . . . . . . EuMC16-1 15 EuMCPoster01-30 44
Mencarelli, Davide . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-16 48 Neilson, David . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-15 42
Meniconi, E. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-3 37 Nepaya, Leokadia . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC07-5 9
Menudier, C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-5 37 Neto, Andrea . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC17-3 16
Merdanov, M.K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-9 47 New, Tony . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC19-1 17
Mesa, Francisco . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC06-1 8 Ng, Herman Jalli . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-5 14
Meshanov, V.P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-9 47 Nghe, Chi Thanh . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC30-4 25
Miao, Li . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC18-5 17 EuMCPoster01-30 44
Micheli, Davide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC37-5 31 Nguyen, Duy P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC43-4 35
Migliaccio, C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC03-4 59 Nguyen, Thuy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC43-4 35
Mikhailov, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-7 41 Ni, Jia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC07-1 8
Mikitchuk, K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC49-4 40 Nicholson, Kelvin J. . . . . . . . . . . . . . . . . . . . . . . . . EuMC31-5 26
Miller, Todd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC02-2 53 Nikitin, A.A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-11 47
Milosevic, Vojislav . . . . . . . . . . . . . . . . . . . . . . . . . EuMC22-4 20 Nikitin, A.A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-18 43
Mimis, Konstantinos . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-25 44 EuMCPoster02-11 47
Min, Seungkee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC06-4 56 Nikitov, Sergey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-46 52
Minard, Philippe . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-24 49 Nikolaevtsev, Viktor . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-46 52
EuMCPoster02-26 49 Nikunen, Joona . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC32-3 27
Miracoli, Rosalba . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC42-3 34 Nishikawa, Kenichi . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC05-5 61
Mitani, Eizo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC21-2 19 Nishikawa, Kenjiro . . . . . . . . . . . . . . . . . . . . . . . . . EuMC48-4 39
Miwa, Shinichi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC30-3 25 Nishizawa, Haruka . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-26 44
Miyashita, Miyo . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC30-2 25 Nitta, Atsushi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC21-2 19
Mizutani, Hiroshi . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC36-3 30 Noujeim, K.M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-36 45
Moglie, Franco . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC37-5 31 Nsele, S.D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC04-2 55
Mohamed, Imran . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC42-4 35 Nuanes, Tyler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC19-1 17
Mohncke, Jan-Philip . . . . . . . . . . . . . . . . . . . . . . . EuMC40-5 33 Nukaga, Osamu . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC01-4 4
Moldovan, E. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-16 42 Nwajana, Augustine O. . . . . . . . . . . . . . . . . . . . . EuMCPoster02-4 47
Molero, Carlos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC06-1 8
Monediere, T. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-5 37 O
Monerris Belda, O. . . . . . . . . . . . . . . . . . . . . . . . . . EuMC12-2 12
Mongiardo, Mauro . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-43 46 Oberberg, Moritz . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC42-2 34
Monje, R. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC04-1 59 Occhiuzzi, C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-47 52
Monka, Carsten . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-3 40 Ocket, I. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC02-4 5
Monorchio, Agostino . . . . . . . . . . . . . . . . . . . . . . EuMC05-4 7 Ofiare, Afesomeh . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC18-2 17
EuMC23-3 20 EuMC22-3 20
Montanari, D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC38-3 31 Ogbodo, Eugene A. . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-1 46
Monteith, Albert . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC35-5 29 EuMCPoster02-3 46
Montejo-Garai, José R. . . . . . . . . . . . . . . . . . . . . . EuMC09-2 10 Oh, Hyun-Myung . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC11-3 12
Monti, Giuseppina . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-43 46 Oh, Jung-Hoon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-43 51
Montoro, Gabriel . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC10-2 11 Ohashi, Yoji . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC05-5 61
Moran, Tamir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC02-2 53 Ohlsson, Lars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC17-5 16
Moreno, Jorge Julián . . . . . . . . . . . . . . . . . . . . . . . EuMC44-3 36 Ohnimus, Florian . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-27 44
Moreno, P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC44-4 36 Ohshima, Takenori . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC05-5 61
Morimoto, Takuo . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC30-2 25 Ohta, Akira . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC30-2 25
Morini, Antonio . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-16 48 Okada, Yosuke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC11-2 11
Morris, Kevin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-28 44 Okamura, Y. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC49-2 39
Morris, Senan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC05-2 7 Okazaki, Hiroyuki . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC06-2 56
Morrison, Jim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC05-2 7 Okba, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC48-3 39
EuMC38-4 31 Oldenborg, S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC47-2 38
Mortazawi, Amir . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC48-1 38 Olsen, Christian Bang . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-28 49
EuMCPoster01-8 41 Onori, D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC03-2 59
Mosalanejad, M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC02-4 5 Oprea, Ion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC18-1 17
Moschetta, Jean-Marc . . . . . . . . . . . . . . . . . . . . . . EuMC03-4 6 Ortega-Cisneros, S. . . . . . . . . . . . . . . . . . . . . . . . . EuMC44-4 36
Mostafa, Mahmoud M. . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-13 48 Osawa, Ken . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC21-2 19
Motoi, Keiichi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC05-1 55 Oshima, Naoki . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC05-1 55
Mouthaan, Ralf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC42-4 35 Osmont, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-48 52
Mozharovskiy, Andrey . . . . . . . . . . . . . . . . . . . . . EuMC01-1 4 Ott, Ed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC37-3 31
EuRAD/EuMC05-2 60 Oueslati, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-5 37
Mu, Ning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC02-3 5 Owada, Tetsu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC11-5 12
Muehlbacher, Peter . . . . . . . . . . . . . . . . . . . . . . . . EuMC43-1 35 Ozaki, Kazuyuki . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC05-5 61
Muessener, Martin . . . . . . . . . . . . . . . . . . . . . . . . . EuMC43-1 35 Ozdemir, Caner . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-34 50
Mukherjee, J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-29 50 Ozden, Kadir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC31-3 26
Müller, Jens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC04-2 6 Ozer, Ahmet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC31-3 26
EuMCPoster01-6 41 Öztürk Özdemir, Pınar . . . . . . . . . . . . . . . . . . . . EuMC24-4 21
Muñoz-Ferreras, José-María . . . . . . . . . . . . . . . EuMC40-3 33
Murad, N.A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC50-2 40 P
Muradov, Magomed . . . . . . . . . . . . . . . . . . . . . . . . EuMC04-5 7
Muraguchi, Masahiro . . . . . . . . . . . . . . . . . . . . . . EuMC08-3 9 Paillot, Jean-Marie . . . . . . . . . . . . . . . . . . . . . . . . . EuMC26-5 22
Murata, H. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC49-2 39 Palego, C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-3 14
Murphy, Olive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC01-5 53 Palm, Stephan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC02-3 58
Murphy, Roberto S. . . . . . . . . . . . . . . . . . . . . . . . . EuMC44-1 36 Palmisano, Giuseppe . . . . . . . . . . . . . . . . . . . . . . EuMC48-5 39
Musch, Thomas . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC20-3 18 Palombi, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC47-4 38
EuMC27-3 23 Pan, Ning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-45 46
EuMCPoster01-13 42 Papanastasiou, Andreas . . . . . . . . . . . . . . . . . . . EuMC28-3 24
Parini, Clive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-37 51
N Park, Byeongdeok . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-14 48
Park, Hyung Cheol . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC01-4 58
Nadaud, Kevin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC02-4 53 Park, Rae-Seoung . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-14 48
Nagaishi, Hideyuki . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC03-3 59 Park, Sung-Jin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC33-2 27
Naglich, Eric J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC46-1 37 Parlebas, Jean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC28-5 24
Nakamura, Kei . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC01-4 4 Parow-Souchon, Kai . . . . . . . . . . . . . . . . . . . . . . . . EuMC04-4 6
Nam, Seunggoo . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC34-3 28
68
Pärssinen, Aarno . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC08-2 9 R
EuMC27-1 23
Raabe, Sebastian . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-3 40
Pascher, Wilfrid . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-44 52
Raboso, David . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC12-2 12
Pasian, Marco . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC09-3 10
EuMC12-3 12
EuMC35-2 29
Radoi, Antonio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-4 14
Patino-Esteban, María . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC04-1 54
Radovanovic, Milos . . . . . . . . . . . . . . . . . . . . . . . . EuMC22-4 20
Payne, Komlan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC16-4 15 Rafael-Valdivia, Guillermo . . . . . . . . . . . . . . . . . EuMC44-2 36
Pedro, José C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC10-5 11 Rahim, M.K.A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC50-2 40
EuMCPoster01-29 44 Rajab, Khalid Z. . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-37 51
Pejoine, Jean-Baptiste . . . . . . . . . . . . . . . . . . . . . . EuMC19-5 18
Rajabi, Mohammad . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-45 46
Pelegrini, M.V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC07-2 57 Rammal, Mohamed . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-4 37
Peng, Tianjie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-2 36 Ran, Lixin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC47-5 38
Percaz, J.M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC13-4 13 Rasolomboahanginjatovo, A.H. . . . . . . . . . . . EuMC01-5 4
Peréz-Wences, C. . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC44-4 36 Rautschke, Felix . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC30-5 25
Périgaud, Aurélien . . . . . . . . . . . . . . . . . . . . . . . . . EuMC19-4 18 EuMCPoster01-27 44
EuMC19-5 18 Rave, Christian . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC36-5 30
Peroulis, Dimitrios . . . . . . . . . . . . . . . . . . . . . . . . . EuMC15-5 15 Ray, K.P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-29 50
EuMC33-2 27 Raya, Christian . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC20-2 18
EuMC40-3 33 Razumov, S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-7 41
EuMC46-4 37 Rebollar, Jesús M. . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC09-2 10
Perregrini, Luca . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC09-3 10 Reglero, Marta . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC12-5 13
EuMC13-5 13 EuMIC/EuMC07-2
Rehder, G.P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
EuMC35-2 29
33 Reina-Tosina, J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-24 43
EuMC40-4
Reinhardt, Alwin . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC02-4 58
Person, Christian . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC23-2 20
Persson, Mikael . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC35-5 29 Remba, Ronald . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-15 42
Peters, Edwin F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC16-4 15 Ren, Fengchao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC03-2 5
Petersen, Esben Thade . . . . . . . . . . . . . . . . . . . . . EuMC35-4 29 Renne, G. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC35-2 29
Petousi, Despoina . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-1 54 Renteria-Cedano, J. . . . . . . . . . . . . . . . . . . . . . . . . EuMC44-4 36
Pham, Anh-Vu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC43-4 35 Reynaud, S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-5 37
Phelps, A.D.R. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-32 45 Reynoso-Hernández, J.A. . . . . . . . . . . . . . . . . . . EuMC44-4 36
Philippe, Pascal . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC26-5 22 Rhodin, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC06-1 56
Piacenza, Francesco . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-16 48 Ricketts, David S. . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC36-2 30
Pilovets, Aleksey . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-46 52 Rieger, R. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC01-2 57
Pinheiro, J.M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC07-2 57 Rito, Pedro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-1 54
Piotrowicz, S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC04-2 55 Roberts, Michael James . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC01-4 53
Pistono, Emmanuel . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC04-3 55 Roberts, T. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-36 45
Platonov, R. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-7 41 Robertson, D.A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC04-3 60
Poddar, Ajay K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC50-3 40 Robertson, Ian D. . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-2 14
Podevin, Florence . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC04-3 55 EuMCPoster01-39 45
EuMIC/EuMC07-2 57 Rodriguez, Sebastian . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-28 49
Podilchak, Symon K. . . . . . . . . . . . . . . . . . . . . . . . 22 Rodríguez-Berral, Raul . . . . . . . . . . . . . . . . . . . . EuMC06-1 8
EuMC25-3
33 Roeber, J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-38 51
EuMC41-1
EuMC41-4 34 Rohde, Ulrich L. . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC50-3 40
Podoskin, D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-6 41 Rohrdantz, Benjamin . . . . . . . . . . . . . . . . . . . . . . EuMC36-5 30
Pohl, Nils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC02-3 58 EuMC40-5 33
Röhrl, Franz Xaver . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC07-3 57
EuRAD/EuMC04-4 60
Rolfes, Ilona . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC20-3 18
EuRAD/EuMC04-5 60
EuMC27-3 23
Polleux, Jean-Luc . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC49-3 39 EuMC42-2 34
Pollin, Sofie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-45 46 Rommel, Simon . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-28 49
Ponomarev, D.V. . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-9 47 Ronald, K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-32 45
Pons, P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC03-3 5 Rönnow, Daniel . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC10-3 11
EuMCPoster02-48 52 Roos, Fabian . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC29-3 24
Popova, N.F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-9 47 Rösch, M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC03-1 59
Pöpperl, Maximilian . . . . . . . . . . . . . . . . . . . . . . . EuMC03-5 6
Rosenberg, Uwe . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC28-3 24
Potelon, Benjamin . . . . . . . . . . . . . . . . . . . . . . . . . EuMC24-5 21
EuMC28-4 24
Potéreau, Manuel . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC20-2 18 EuMC34-4 28
Pothier, Arnaud . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-3 14 Roubeau, Fabien . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC02-4 53
EuMIC/EuMC02-4 53
Rousseau, L. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC47-4 38
Powell, Jeff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC04-4 6 Rowland, Jason . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC07-4 9
EuMIC/EuMC01-1 52 EuMIC/EuMC03-1
Rücker, Holger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Pozzebon, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC03-1 5 Ruiz, M. Nieves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC10-2 11
Pradhan, Soumyakanta . . . . . . . . . . . . . . . . . . . . EuMC22-2 19 Ruiz-Cruz, Jorge A. . . . . . . . . . . . . . . . . . . . . . . . . EuMC09-2 10
Prantner, Michael . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC47-1 38 Russer, Johannes A. . . . . . . . . . . . . . . . . . . . . . . . EuMC03-4 6
Preis, Sebastian . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC21-3 19 EuMC25-4 22
Presse, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC37-4 31 EuMC29-2 24
Preston, Shaun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC47-3 38 EuMC32-2 27
Provinciali, Mauro . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-16 48 Russer, Peter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC03-4 6
Prziwarka, Thomas . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-2 54 EuMC25-4 22
Psychogiou, Dimitra . . . . . . . . . . . . . . . . . . . . . . . EuMC40-3 33 EuMC29-2 24
EuMC46-4 37 EuMC32-2 27
Pueyo-Tolosa, Marcos . . . . . . . . . . . . . . . . . . . . . EuMC28-3 24 Rybalko, Oleksandr . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-20 48
Puyal, Vincent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC04-3 55
Pyne, Budhaditya . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC03-5 59 S
Q Safavi-Naeini, Safieddin . . . . . . . . . . . . . . . . . . . . EuMC49-5 40
Safwat, Amr M.E. . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-13 48
Qiu, Liang-Feng . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC07-3 9 Sainati, Robert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-10 47
Quaglia, Roberto . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC21-4 19 Saito, Hirobumi . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC03-5 59
Quay, Rüdiger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC21-5 19 Saito, Kengo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-23 43
EuMC30-1 25 Sakai, Fuminori . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC32-1 26
Quendo, Cédric . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC24-5 21 Sakaki, Hiroto . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC48-4 39
Quéré, Raymond . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC15-2 15 Salazar-Palma, M. . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC25-2 21
EuMCPoster01-37 45 Salza, Giuseppe . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC12-5 13
Sama, N.Y. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC01-5 4
Samczyński, Piotr . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC02-5 58
Sample, Alanson P. . . . . . . . . . . . . . . . . . . . . . . . . EuMC39-2 32
Samsuri, N.A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC50-2 40
69
Sanchez de Rojas, J.V.M. . . . . . . . . . . . . . . . . . . . EuMC46-2 37 Sizov, F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-34 45
Sánchez-Montero, Rocío . . . . . . . . . . . . . . . . . . . EuMCPoster02-32 50 Sjöberg, Daniel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC17-5 16
EuMIC/EuMC04-1 54 Skalare, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC04-1 59
Sandhu, A.I. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-3 37 Skripal, A.V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-9 47
Sandhu, Muhammad . . . . . . . . . . . . . . . . . . . . . . . EuMC13-2 13 Sloan, Robin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC04-4 6
EuMC28-1 23 EuMC27-5 23
EuMC46-5 38 EuMCPoster02-22 49
Sanz-Izquierdo, B. . . . . . . . . . . . . . . . . . . . . . . . . . EuMC05-3 7 Smartt, Christopher . . . . . . . . . . . . . . . . . . . . . . . EuMC25-4 22
Sarkar, Debdeep . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-42 51 EuMC37-2 30
Sarma, Sanjay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC32-4 27 Smith, R.M.H. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC01-3 53
Sasaki, Eisaku . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC08-5 10 Snyder, Richard V. . . . . . . . . . . . . . . . . . . . . . . . . . EuMC13-3 13
Sasaki, Yoshinobu . . . . . . . . . . . . . . . . . . . . . . . . . EuMC30-3 25 Soboll, Patrick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC31-4 26
EuMIC/EuMC06-2 56 Socheatra, Soeung . . . . . . . . . . . . . . . . . . . . . . . . . EuMC07-2 9
Satoh, Tomio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC21-2 19 Socher, Eran . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC22-5 20
Sattler, Sebastian W. . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC05-4 56 Soens, C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC02-4 5
Saucourt, Jérémy . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC19-4 18 Sol, J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC37-4 31
Sauleau, Ronan . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC23-2 20 Solazzi, Gian Leonardo . . . . . . . . . . . . . . . . . . . . EuMCPoster02-41 51
Saulig, Stefan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC42-5 35 Sombrin, Jacques . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-37 45
Saunders, Brian . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC47-3 38 Somjit, Nutapong . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC13-2 13
Saurav, Kushmanda . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-42 51 EuMC14-2 14
Schaefer, Jochen . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC05-1 60 EuMC28-1 23
Schartel, Markus . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC01-1 57 Sommer, Rainer . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC02-3 58
Schenk, Lothar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC43-1 35 Son, Ju Ho . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC11-3 12
EuMCPoster01-27 44 Song, Jinsong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC32-3 27
Scherr, Steffen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC07-4 57 Song, Mingzhao . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC39-4 32
Schlechtweg, Michael . . . . . . . . . . . . . . . . . . . . . . EuMC20-4 18 Song, Zhe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC02-2 4
EuMC42-1 34 Sorbello, Gino . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC42-3 34
Schmitt, Christoph . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-23 49 Soutis, Constantinos . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-22 49
Schneider, Martin . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC28-5 24 Sovuthy, Cheab . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC07-2 9
Schoebel, Joerg . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-3 40 Sowers, James J. . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-15 42
Schreurs, Dominique . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-45 46 Soykin, Oleg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC01-1 4
Schubert, Markus Andreas . . . . . . . . . . . . . . . . EuMIC/EuMC03-1 54 EuRAD/EuMC05-2 60
Schuchinsky, Alexander G. . . . . . . . . . . . . . . . . EuMC33-3 27 Srivastava, Kumar Vaibhav . . . . . . . . . . . . . . . . EuMC31-1 26
Schulz, Christian . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC27-3 23 EuMCPoster02-42 51
EuMC42-2 34 Ssorin, Vladimir . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC01-1 4
Schüßler, Martin . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC05-2 55 Stanko, Stephan . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC02-3 58
Schuster, Christian . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC05-2 55 EuRAD/EuMC04-5 60
Schwantuschke, D. . . . . . . . . . . . . . . . . . . . . . . . . . EuMC27-2 23 Stefanini, Romain . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC02-4 53
EuMC30-1 25 Stegner, J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-6 41
Schwerg, Nikolai . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC11-4 12 Stehr, U. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-6 41
Scotti, Filippo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC03-2 59 EuMCPoster01-21 43
Ségalen, Rémi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC24-5 21 Stelzer, Andreas . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC36-1 30
Sekine, Norihiko . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC18-3 17 Stenson, Bernard . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC02-3 53
Selga, Jordi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC06-2 8 Stephan, Achim . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC47-1 38
Semenov, A.A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-11 47 Stephan, Ralf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC04-2 6
Semnani, Abbas . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC33-2 27 EuMCPoster01-21 43
Sence, Johann . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC19-5 18 Stöpel, Dirk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC04-2 6
Senega, S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-38 51 Storch, Robert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-13 42
Serna, José M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC04-1 54 Stove, Andy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC02-1 58
Serrano, A.L.C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC07-2 57 EuRAD/EuMC04-2 60
Severs, Sean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC05-4 60 Streitz, Thomas . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC07-4 57
Shahmohammadi, Mohsen . . . . . . . . . . . . . . . . EuMC39-2 32 Su, Han . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC04-1 6
Shamim, Atif . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC07-5 57 EuMC06-3 8
Shang, Xiaobang . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC19-3 18 EuMC43-3 35
EuMIC/EuMC01-1 52 Su, Yan-Kuin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC24-2 21
Shatrova, Iuliia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-46 52 Su, Zhiguo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC44-2 36
Shaw, Robert D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC05-4 60 Suchkov, Dmitry . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-46 52
Suchkov, Sergey . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-46 52
She, Chuanfei . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-1 36
Shimamura, Hitoshi . . . . . . . . . . . . . . . . . . . . . . . EuMC48-4 39 Suga, R. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC17-4 16
Shimizu, Masahiko . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC05-5 61 Summers, P.E. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC35-2 29
Sun, Shoujia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-6 47
Shimura, Toshihiro . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC05-5 61
Sužiedėlis, Algirdas . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-33 45
Shin, Sanghoon . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC46-1 37
Svanda, Milan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC32-5 27
Shinjo, Shintaro . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC06-2 56 Svelto, F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC35-2 29
Shiozawa, Takahiro . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-40 45 Szymanowski, Margaret . . . . . . . . . . . . . . . . . . . EuMIC/EuMC06-4 56
Shirato, Yushi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC08-3 9
Shitvov, Alexey P. . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC33-3 27 T
Shramkova, O.V. . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-12 47
Siart, Uwe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC01-5 58 Tafur Monroy, Idelfonso . . . . . . . . . . . . . . . . . . EuMC15-1 14
Siblini, Ali . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-4 37 EuMCPoster02-28 49
Sickinger, Frank . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC05-3 60 Tafuto, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC03-2 59
Sidiropoulos, Nikolas . . . . . . . . . . . . . . . . . . . . . . EuMC12-5 13 Tahara, Yukihiro . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC11-5 12
Sieger, Stefan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC04-5 60 Taher, H. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC06-4 8
Sievenpiper, Daniel . . . . . . . . . . . . . . . . . . . . . . . . EuMC41-5 34 Tajima, Ken’ichi . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-41 46
Sieverding, Thomas . . . . . . . . . . . . . . . . . . . . . . . . EuMC28-3 24 Takacs, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC48-3 39
EuMC28-4 24 Takagi, Hiroaki . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-11 42
EuMC34-4 28 Takano, Kazuaki . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC03-3 59
Sijbrands, J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC47-2 38 Takano, Kyoya . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC18-3 17
Silavwe, Evans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-2 14 Takayama, Yoichiro . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-26 44
Siligaris, Alexandre . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC04-3 55 Takeda, Hideji . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC11-5 12
Silva Valdecasa, Guillermo . . . . . . . . . . . . . . . . EuMC15-1 14 Takeda, Shigeki . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC06-5 8
Silvestri, Lorenzo . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC38-3 31 Tamura, Masaya . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-2 46
EuMC40-4 33 Tanaka, Ryuya . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC48-4 39
Sin, Philippe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC06-5 56 Tanaka, Shinichi . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-23 43
Sinanis, Michael . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC33-2 27 Tanaka, Tsuneyuki . . . . . . . . . . . . . . . . . . . . . . . . . EuMC21-2 19
Singh, Yatendra Kumar . . . . . . . . . . . . . . . . . . . . EuMCPoster01-22 43 Tanelli, S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC04-1 59
Sis, Seyit Ahmet . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC39-3 32 Tang, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC04-1 59
Tang, Yao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC47-5 38
70
Tanner, Gregor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC32-2 27 Venkatesh, D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-9 41
EuMC37-2 30 Verdeyme, Serge . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC19-4 18
Tantot, Olivier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC19-4 18 EuMC19-5 18
EuMC19-5 18 Viana, Carlos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC49-3 39
Taroncher, Máriam . . . . . . . . . . . . . . . . . . . . . . . . EuMC12-5 13 Viaud, Jean Pierre . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC06-5 56
Tarot, A.-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC37-4 31 Vicente, Carlos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC12-3 12
Tarricone, Luciano . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-43 46 EuMC12-5 13
Tartarin, J.G. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC04-2 55 Vidmar, Matjaž . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-3 54
Tatu, S.O. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-16 42 Viegas, Colin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC04-4 6
Tcvetkova, Svetlana . . . . . . . . . . . . . . . . . . . . . . . . EuMC23-1 20 Viikari, Ville . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC32-3 27
Teberio, F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC13-4 13 Vincent, Didier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-38 45
EuMC46-2 37 Vossiek, Martin . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC03-5 6
Teniente, J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC02-5 5 Vourch, Clement J. . . . . . . . . . . . . . . . . . . . . . . . . . EuMC41-3 34
Tentzeris, Manos . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC13-5 13 EuMCPoster02-27 49
Teplyuk, Alexander . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC02-4 58 Vulfin, Vladimir . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC25-1 21
Teranishi, Eri . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC30-3 25
Tercero Martínez, Félix . . . . . . . . . . . . . . . . . . . . EuMCPoster02-32 50 W
Tervo, Nuutti . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC08-2 9
Wada, Koji . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC32-1 26
EuMC27-1 23
Tessmann, Axel . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC27-2 23 Wagner, S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC30-1 25
EuRAD/EuMC03-1 59
EuMC30-1 25
EuRAD/EuMC03-1 59 Walber, Achim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC18-1 17
Thépaut, Loïc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC24-5 21 Waldschmidt, Christian . . . . . . . . . . . . . . . . . . . EuMC02-1 4
Thevenot, M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-5 37 EuMC29-3 24
Thomas, D.W.P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC03-4 6 EuMC42-5 35
EuRAD/EuMC01-1 57
EuMC25-4 22
EuMC29-2 24 Wales, Stephen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-28 44
EuMC32-2 27 Walling, Jeffrey S. . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC27-4 23
EuMC37-2 30 Wallis, D.J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC22-1 19
Tian, Yingtao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC01-1 52 Wambacq, Piet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC05-3 55
Tian, Zhengrong . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC42-4 35 Wane, Sidina . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC03-4 6
Tillack, B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC02-5 53 EuMC25-4 22
Timmons, Nick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC05-2 7 EuMC29-2 24
EuMC38-4 31 EuMC32-2 27
Ting, S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC25-2 21 Wang, Cheng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC18-5 17
Tkadlec, Roman . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC24-1 21 Wang, Gang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-39 51
Toba, Yoshikazu . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC29-5 25 Wang, Hao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-33 50
Tolunay Wipf, S. . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC02-5 53 Wang, Huei . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC04-5 55
Tomassoni, Cristiano . . . . . . . . . . . . . . . . . . . . . . EuMC13-5 13 Wang, Jue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC18-2 17
EuMC40-4 33 EuMC22-3 20
Torii, Takuma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC30-2 25 EuMCPoster02-25 49
Torres-Torres, Reydezel . . . . . . . . . . . . . . . . . . . EuMC44-1 36 Wang, Lu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-39 51
Torrisi, Giuseppe . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC42-3 34 Wang, Qian . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC02-3 5
Toumazou, Christofer . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC01-5 53 Wang, Qiang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-1 36
Traverso, Sylvain . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC08-4 9 Wang, Shitao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC02-2 58
Tretyakov, Sergei . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC23-1 20 Wang, Siqi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC10-4 11
Tripodi, Lorenzo . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC18-4 17 Wang, Teng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC10-2 11
Trummer, Stefan . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC01-5 58 Wang, Xiaotao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-2 36
Tsai, Hann-Huei . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC48-2 39 Wang, Xiaoyu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC48-1 38
Tschoban, Christian . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC07-1 56 Wang, Yi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC17-1 16
Tsiamoulos, Zacharias . . . . . . . . . . . . . . . . . . . . . EuMC47-3 38 EuMCPoster02-1 46
Tsironis, G.P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-12 47 EuMCPoster02-3 46
Tsuchiya, Masahiro . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-40 45 Wang, Ying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC02-3 5
EuMIC/EuMC06-4
Wang, Yudie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-5 41
Tucker, Geoff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Wang, Ziming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC04-1 6
Tumarkin, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-7 41
EuMC06-3 8
Tuovinen, Tommi . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC08-2 9
EuMC43-3 35
EuMC27-1 23
Wang, Zonghao . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC50-1 40
Turgaliev, Viacheslav . . . . . . . . . . . . . . . . . . . . . . EuMC34-1 28
Wangler, Christian . . . . . . . . . . . . . . . . . . . . . . . . . EuMC11-4 12
U Wasige, Edward . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC18-2 17
EuMC22-3 20
Udvary, Eszter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC49-3 39 EuMCPoster02-25 49
Uemichi, Yusuke . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC01-4 4 Watanabe, Issei . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC18-3 17
Ulusoy, Ahmet Cagri . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-1 54 Watanabe, Shinsuke . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC06-2 56
Umezawa, T. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC49-2 39 Watkins, Gavin T. . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-25 44
EuMIC/EuMC03-4 54 Watts, C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-1 14
Usanov, D.A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-9 47 Wedding, Carol A. . . . . . . . . . . . . . . . . . . . . . . . . . EuMC16-4 15
Ustinov, A.B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-18 43 Wedding, Daniel K. . . . . . . . . . . . . . . . . . . . . . . . . EuMC16-4 15
EuMCPoster02-11 47 Wegeland, T. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC06-1 56
Wei, Muh-Dey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-2 40
V Weigel, Robert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-38 51
Valcazar, D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC02-5 5 Weimann, Nils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC26-1 22
Valette, Agathe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC08-4 9 EuMC26-4 22
Vandenbosch, G.A.E. . . . . . . . . . . . . . . . . . . . . . . . EuMC02-4 5 Weissbrodt, Ernst . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC05-3 60
van Goor, Dave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC18-4 17 Wen, Xin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-31 50
van Liempd, Barend . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC05-3 55 Wentzel, Andreas . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC43-5 35
van Stam, G. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC47-2 38 EuMC46-5 38
EuMCPoster02-18 48 Wernersson, Lars-Erik . . . . . . . . . . . . . . . . . . . . . EuMC17-5 16
van Tienhoven, G. . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC47-2 38 Wessel, J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC14-5 14
EuMCPoster02-18 48 Wheeler, Edward . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC19-1 17
Vaquero-Jiménez, Beatriz . . . . . . . . . . . . . . . . . EuMIC/EuMC04-1 54 White, Malcolm . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC47-3 38
Vasanelli, Claudia . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC02-1 4 Wielgat, Marcin . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC27-5 23
Vaseem, Mohammad . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC07-5 57 Wiens, Alex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC21-3 19
EuMC33-1 27
Vegas Olmos, Juan José . . . . . . . . . . . . . . . . . . . EuMC15-1 14
EuMIC/EuMC05-2 55
EuMCPoster02-28 49
Vélez, Paris . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC06-2 8 Wietstruck, M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC02-5 53
Venanzoni, Giuseppe . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-16 48 Wijayanto, Y.N. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC49-2 39
Venard, Olivier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC10-4 11
71
Willetts, B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC04-2 60 Zhang, Tianyu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-1 40
Winkler, Wolfgang . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC07-4 57 Zhang, Wentao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-1 36
EuRAD/EuMC05-1 60 Zhang, Zihui . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC30-5 25
Wipf, C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC02-5 53 EuMCPoster01-4 41
Wölfel, Maximilian . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-23 49 Zhao, Huichang . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC02-3 5
Wolff, Nikolai . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC21-3 19 Zhao, Qi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-39 51
EuMC43-2 35 Zhao, Yangping . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC04-3 6
Wong, Ka Wai . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-20 43 Zhao, Yu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC09-4 10
Wong, Peng Wen . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC07-2 9 Zhong, Yi Cheng . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC17-2 16
Wu, Handong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-2 36 Zhou, Haiping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC18-2 17
Wu, Hung-Wei . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC24-2 21 Zhou, Wei . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC35-3 29
Wu, Ke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC03-2 5 Zhou, Zhou . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC07-1 8
EuMC04-3 6 EuMC46-3 37
EuMC44-5 36 Zhu, Anding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-5 41
Wu, Lin-Sheng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC07-3 9 Zhuang, Kui . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-1 36
Wu, Po-Chang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC48-2 39 Zhurbenko, Vitaliy . . . . . . . . . . . . . . . . . . . . . . . . . EuMC01-2 4
Wu, Tzong-Lin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-5 47 EuMC35-4 29
Wu, Yahui . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC13-1 13 EuMCPoster02-20 48
Wu, Yu-Chen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC15-5 15 Ziegler, Volker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-3 37
Wu, Yun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-1 46 Zimmer, Gernot . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC30-4 25
EuMCPoster02-3 46 Zimmer, Thomas . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC20-2 18
Wu, Yunqiu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC28-2 24 Zimmermann, Lars . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-1 54
Wursthorn, Jonas . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC26-2 22 Zimmermanns, Marc . . . . . . . . . . . . . . . . . . . . . . . EuMC20-3 18
Zirath, Herbert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC35-5 29
X Zlebic, Cedo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC05-1 7
Zolfagharloo Koohi, Milad . . . . . . . . . . . . . . . . . EuMCPoster01-8 41
Xiao, Gaobiao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC09-4 10 Zorn, Stefan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC07-3 57
Xie, Nan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-40 51
Zouggari, B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-16 42
Xu, H. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-19 43
Zwick, Thomas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC28-5 24
Xu, Ruimin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC28-2 24
EuMIC/EuMC07-4 57
Xu, Yuehang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC28-2 24
EuRAD/EuMC05-1 60
Y
Yacoub, Magdi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC01-5 53
Yahav, Nir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-12 42
Yamabe, Shigeo . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC30-3 25
Yamaguchi, Keiichi . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-25 44
Yamamoto, N. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC49-2 39
EuMIC/EuMC03-4 54
Yaman, Fatih . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC31-3 26
Yamanaka, Koji . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC30-2 25
EuMIC/EuMC06-2 56
Yamaoka, Atsushi . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-25 44
Yan, Pinpin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-5 54
Yanchuk, Dmitry . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC11-1 11
Yang, Chao-Shun . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC48-2 39
Yang, Hee Jun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC33-2 27
Yang, Jun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-6 47
Yang, Liang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-33 50
Yankin, Sergey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-46 52
Yavuz, Mehmet E. . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-21 49
Yegin, Korkut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-34 50
Yeo, Kenneth S.K. . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-4 47
Yeo, Tae-Dong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC39-5 32
EuMCPoster01-44 46
Yin, H. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-32 45
Yin, Wen-Yan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC07-3 9
Yin, Xinshe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-6 47
Yokota, Hideo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-21 49
Yoneda, Naofumi . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC11-5 12
Yoshida, Satoshi . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC48-4 39
Yoshida, Takeshi . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC18-3 17
Yoshiizumi, H. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC17-4 16
Yoshikoshi, Hiroyuki . . . . . . . . . . . . . . . . . . . . . . EuMC21-2 19
You, Jian Wei . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC12-1 12
Yu, Chao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC03-5 54
Yu, Jong-Won . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC39-5 32
EuMCPoster01-44 46
Yuan, Quan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC02-2 4
Yucedag, Okan Mert . . . . . . . . . . . . . . . . . . . . . . . EuMC31-3 26
Yunoue, Norihiro . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC30-2 25
Yurduseven, Ozan . . . . . . . . . . . . . . . . . . . . . . . . . EuMC17-3 16
Yusoff, M.F.M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC50-2 40
Z
Zaccaron, A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC03-2 59
Zech, Christian . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC20-4 18
EuMC42-1 34
Zein, Nader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC08-5 10
Zeng, Xuezhi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC35-5 29
Zerioul, Lounis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC08-4 9
Zhai, Chenxi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC06-3 56
Zhan, Ying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMC45-1 36
Zhang, L. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster01-32 45
Zhang, Lin-Yang . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMIC/EuMC02-4 53
Zhang, Miao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuRAD/EuMC03-5 59
Zhang, Peng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EuMCPoster02-31 50
72