Escolar Documentos
Profissional Documentos
Cultura Documentos
Protect Information
• Digitally-signed and encrypted controller firmware
• Controller based change detection and logging
• Role-based access control to routines and Add-On Instructions
• License-based content protection
General Information
• Real time control executes in the Logix control engine. Windows applications may run in parallel to the Logix real time
control. This is a key differentiator between the CompactLogix 5480 and a PC-based controller.
• Real time control is programmed in Logix Designer v30 and above.
• The CompactLogix 5480 controller supports Integrated Motion on EtherNet/IP.
Future catalog numbers being considered are pre-installed FactoryTalk® View software and embedded PanelView 5000.
VGA
UPS
R
OK FAN 1
B
RUN SD
FORCE FAN 2 F
MP
1 GbE
LINK B1
DisplayPort
NET A1
LINK A1
SA
NET A1 NET X1
NET A2 LINK X1
2 CompactLogix 5480
™
1 GbE
Mod Mod Mod Mod Mod Mod Mod Mod Mod Mod Mod Mod
Net Net Net Net Net Net Net Net Net Net Net Net
5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700
ADAPTER ADAPTER
OK OK
NET NET
LINK 2 LINK 2
5069-AENTR 5069-AENTR
SA POWER SA POWER
Compact I/O™
2
Compact I/O™
Kinetix® 5700 PowerFlex® 527 Kinetix 5700 PowerFlex 527
5069 Compact I/O
KEY CONTACT
Jason Shaw, Product Manager
440-646-5114
jnshaw@ra.rockwell.com
Allen-Bradley, Compact I/O, CompactLogix, ControlLogix, FactoryTalk View, Kinetix, PanelView, PhaseManager, PowerFlex, Rockwell Software, SequenceManager, Stratix, Studio 5000 and VersaView are trademarks
of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies. EtherNet/IP is a trademark of ODVA, Inc.
Expires June 2018 Copyright © 2017 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.