Escolar Documentos
Profissional Documentos
Cultura Documentos
Michael Steven Romero Barrera (Cód. 2161615); Holmes Daniel Suárez Romero (Cód. 2123032);
Javier Güiza Romero (Cód. 2143188).
Universidad Industrial de Santander, Bucaramanga Colombia
Escuela de Ingeniería Metalúrgica y Ciencia de los Materiales maicolromero100@gmail.com;
danyazul-93@hotmail.com; javier_wizza@hotmail.com
Laboratorio de Beneficio de Minerales, Grupo E2
Abstract:
With the realization of the laboratory practice, it was possible to observe how the angle of repose of
the mineral supplied in the laboratory varies taking into account the% moisture and the% of particulate
material (fines) that were added to the sample; The main one is to see the variation of the angle of
repose with respect to these varibel and to check what the theory establishes. When doing the due
process of data collection it was observed that the angle of repose of a mineral increases as fine
particles are added, in addition this angle increases, when adding water, according to the humidity
limit that the sample tolerates. The percentages used for fines were 1, 2, 4, 8, 16, for humidity, 0, 1,
2, 4, 8 were used, also as a percentage of the total sample sifted. For both cases it could be observed
that for the increase of the two parameters the angle of repose was increasing, from this we can affirm
that the angle of repose increases as the percentage of these also counts.
metalúrgica después de extraer los minerales para almacenar el mineral, es donde se hace
partícula por medio del proceso de molienda estos atendiendo a factores como humedad y
esto con el fin de tener un grado de liberación partículas finas dentro del mineral; Ángulo de
los tamaños de las partículas de un porcentaje de finos hasta un 16%. Para cada
agregado, tal como se determina por
procedimiento lo primero fue pesar 1000 (g)
análisis de tamices. Es la medición de
los granos de una formación de material para los finos se tamizo mineral
procedimiento.
Se encuentra en anexos debido a las
finos respectivamente.
seco.
De la gráfica 2 observamos un
rgica/files/paginas/capitulo12.pdf
De la experiencia de laboratorio de ángulo de
[2] Análisis granulométrico Lab Walter
reposo pudimos concluir que, para el
Pardavé
almacenamiento de minerales liberados en
finos.
Bibliografía
MINERALES, Departamento de
de Santiago de Chile.
Anexos
Masa Altura
(gr) % Finos Diámetro (cm) Diámetro prom. Radio (cm) (cm) Ángulo de reposo
1000 0 20,5 20,8 20,3 20,53333 10,26667 4,4 23,20
10 1 19,9 20,1 20 20,00000 10,00000 4,5 24,23
10 2 19,5 21 20,5 20,33333 10,16667 4,8 25,27
20 4 20,5 20,3 20,7 20,50000 10,25000 4,9 25,55
40 8 20 20 20 20,00000 10,00000 5,1 27,02
80 16 20,8 20,5 20,6 20,63333 10,31667 7,1 34,54
Masa % Altura
(gr) Humedad Diámetro (cm) Diámetro prom. Radio (cm) (cm) Ángulo de reposo
80 0 21,5 21 22,5 21,67 10,83333 4,4 22,10
11,6 1 19,7 21 20,5 20,40 10,20000 6,6 32,91
11,6 2 22,3 20,5 18,5 20,43 10,21667 7 34,42
23,2 4 19,6 17,5 19,6 18,90 9,45000 8,4 41,63
46,4 8 19,3 19 18,7 19,00 9,50000 9,1 43,77