Você está na página 1de 12

Calbiga National High School

Calbiga, Samar
Covered and Uncovered Skills in TLE 8 - Horticulture (Exploratory)
Fourth Quarter
S.Y. 2017-2018

OBJECTIVES COVERED NOT COVERED

Select and use farm tools

> Identify farm tools according to use √


> Check farm tools for faults √
> Use appropriate tools for the job requirement according
to manufacturer's specificationos and instructions √

Select farm equipment


> Identify farm equipment √
> Follow the guidelines in the instructional manual of farm
equipment √

> Conduct pre-operation check-up in line with the


manufacturer's manual √

> Identify faults in farm equipment and facilities √


> Use farm equipment according to their function √
Check conditions of tools and equipment
> Label defective tool √
> Report the list of defective tools √
Perform preventive maintenance
> Clean tools and equipment after use in line with farm
procedures √

> Perform routine check-up and maintenance √


> Follow procedures in sharpening and oiling farm tools
and equipment √

Perform estimation
> Identify job requirement from written and oral √
communications
> Estimate the quantity of materials and resources
required to complete a work/ task √

> Estimate a time needed to complete a work/activity √


> Follow procedures in reporting to appropriate persons
the estimate of materials and resources √

Perform basic workplace calculation


> Identify calculations to be done according to job √
requirement
> Determine correct methods of calculation √
> Ascertain systems and units of measurements to be √
followed
> Perform calculations needed to complete a task using
the four fundamental operations √

> Employ different techniques in checking accuracy of √


result
Calbiga National High School
Calbiga, Samar
Covered and Uncovered Skills in TLE 8 - Horticulture (Exploratory)
Fourth Quarter
S.Y. 2017-2018
> Use appropriate operations to comply with the job
requirement √

Layout garden plots


> Design farm plans and layouts according to crop grown √
> Follow strictly planting system and practices according
to approved cultural practices √

> Interpret irrigation system plan according to established


procedures √

> Differentiate designs of irrigation system √


Apply safety measures while working in the farm
> Apply safety measures based on work equipment and
farm procedures √

> Utilize tools and materials in accordance with farm


requirements √

> Explain the importance of wearing work outfit in



accordance with farm requirements
> Check shelf life and/or expiration of materials and
supplies against manufacturer's specifications √

> Identify risks and hazards in the workplace and report


them in accordance with farm guidelines √

Safely keep/dispose tools, materials and outfit

> Observe procedures in cleaning used outfits in line with


farm procedure before storing √

> Follow the guidelines in labeling unused materials to be


stored according to manufacturer's recommendation and √
farm requirement
> Dispose waste materials according to manufacturer's

government and farm requirements
Prepared by:
Noted:
LOLITA B. FELICEN
TLE Department Head
Approved:

ANTONIO F. CAVEIRO, Ph. D.


Secondary School Principal IV
Calbiga National High School
Calbiga, Samar
red Skills in TLE 8 - Horticulture (Exploratory)
Fourth Quarter
S.Y. 2017-2018

INTERVENTIONS MADE FOR THE


SKILLS NOT COVERED
Calbiga National High School
Calbiga, Samar
red Skills in TLE 8 - Horticulture (Exploratory)
Fourth Quarter
S.Y. 2017-2018

ANA MIA C. CAVEIRO


Teacher

Approved:

ANTONIO F. CAVEIRO, Ph. D.


Secondary School Principal IV
Calbiga National High School
Calbiga, Samar

Covered and Uncovered Skills in TLE 7 - Computer Hardware Servicing (Explorator


Third Quarter
S.Y. 2018-2019

OBJECTIVES COVERED NOT COVERED

Prepare hand tools and equipment for computer


hardware servicing
> Check the list of tools and equipment to be
requested per job requirement √

> Inspect the requested tools and equipment √


> Assess the condition of all hand tools and
equipment for proper operation and safety √

Use and maintian hand tools, measuring


instrument and equipment
> Perform safety procedures in using hand tools and √
equipment
> Follow procedures in cleaning, tightening, and
simple repair of hand tools, equipment and √
paraphernalia
> Identify common malfunction (unplanned or
unusual events) when using tools, equipment and √
paraphernalia
> Follow procedures in preparing a report to property √
custodian
Perform basic mensuration
> Identify object/s to be measured √
> Use the correct specifications as specified in the √
operating system
Carry out mensuration and calculation
> Perform calculation needed to complete task using
the four mathematical fundamental operations √
(addition, subtraction, multiplication and division)
> Employ different techniques in checking accuracy
of the computation √

Prepare and Interpret Technical Drawing


> Identify basic symbols used in technical drawing √
> Select technical drawing in accordance with the √
job requirement
> Identify the basic symbols used in flowcharting √
> Interpret the symbols used in flowcharting √
> Create a flowchart that depicts a simple scenario √
Practice Occupationla Health and Safety
Procedures
> Explain hazards and risks in the workplace √
> Identify hazards and risks indications in the √
workplace
> Apply contingency measures in accordance with √
the OHS procedures
> Determine the effects of hazards and risks √
> Classify the types of hazards and risks in the √
workplace
> Follow OHS procedures for controlling hazards and √
risks
> Use personal protective equipment (PPE) √
> Follow and observe organizational protocol when
providing emergency assistance √

> Participate in related drills and training √


> Prepare OHS personal records in accordance with
workplace requirement √

Prepared by:
Noted:
LOLITA B. FELICEN
Secondary School Head Teacher VI
Approved:

ANTONIO F. CAVEIRO, Ph. D.


Secondary School Principal IV
Calbiga National High School
Calbiga, Samar

in TLE 7 - Computer Hardware Servicing (Exploratory)


Third Quarter
S.Y. 2018-2019

INTERVENTIONS MADE FOR THE


SKILLS NOT COVERED
ANA MIA C. CAVEIRO
Teacher

Approved:

ANTONIO F. CAVEIRO, Ph. D.


Secondary School Principal IV
Calbiga National High School
Calbiga, Samar

Covered and Uncovered Skills in TLE 8 - Computer Hardware Servicing (Explorator


Third Quarter
S.Y. 2018-2019

OBJECTIVES COVERED NOT COVERED

Prepare hand tools and equipment for computer


hardware servicing
> Check the list of tools and equipment to be
requested per job requirement √

> Inspect the requested tools and equipment √


> Assess the condition of all hand tools and
equipment for proper operation and safety √

Use and maintian hand tools, measuring


instrument and equipment
> Perform safety procedures in using hand tools and √
equipment
> Follow procedures in cleaning, tightening, and
simple repair of hand tools, equipment and √
paraphernalia
> Identify common malfunction (unplanned or
unusual events) when using tools, equipment and √
paraphernalia
> Follow procedures in preparing a report to property √
custodian
Perform basic mensuration
> Identify object/s to be measured √
> Use the correct specifications as specified in the √
operating system
Carry out mensuration and calculation
> Perform calculation needed to complete task using
the four mathematical fundamental operations √
(addition, subtraction, multiplication and division)
> Employ different techniques in checking accuracy
of the computation √

Prepare and Interpret Technical Drawing


> Identify basic symbols used in technical drawing √
> Select technical drawing in accordance with the √
job requirement
> Identify the basic symbols used in flowcharting √
> Interpret the symbols used in flowcharting √
> Create a flowchart that depicts a simple scenario √
Practice Occupationla Health and Safety
Procedures
> Explain hazards and risks in the workplace √
> Identify hazards and risks indications in the √
workplace
> Apply contingency measures in accordance with √
the OHS procedures
> Determine the effects of hazards and risks √
> Classify the types of hazards and risks in the √
workplace
> Follow OHS procedures for controlling hazards and √
risks
> Use personal protective equipment (PPE) √
> Follow and observe organizational protocol when
providing emergency assistance √

> Participate in related drills and training √


> Prepare OHS personal records in accordance with
workplace requirement √

Prepared by:
Noted:
LOLITA B. FELICEN
Secondary School Head Teacher VI
Approved:

ANTONIO F. CAVEIRO, Ph. D.


Secondary School Principal IV
Calbiga National High School
Calbiga, Samar

in TLE 8 - Computer Hardware Servicing (Exploratory)


Third Quarter
S.Y. 2018-2019

INTERVENTIONS MADE FOR THE


SKILLS NOT COVERED
ANA MIA C. CAVEIRO
Teacher

Approved:

ANTONIO F. CAVEIRO, Ph. D.


Secondary School Principal IV

Você também pode gostar