Escolar Documentos
Profissional Documentos
Cultura Documentos
Contact us
Our Company
Environmental Policy
Delivery Terms & Conditions
Page i
QUALITY MANAGEMENT SYSTEM
NDT Equipment Supplies Ltd and all our employees are committed to the development,
implementation and success of our Quality Management System established to the Quality
Standard BS EN ISO 9001: 2008.
Through monitoring and measurement we will seek to continually improve the Quality
Management System
We will maintain close communication with our customers to establish their changing needs
and expectations and it is our policy to meet these contracted commitments.
The Quality Management System will be supported through continual staff training and
awareness to ensure that our policies and objectives are maintained and relevant to our
requirements. The prime objective of all members of staff is to ensure customer satisfaction
by:
Quality objectives will be set in line with the current plan and the requirements of the
business. These objectives will be reviewed and new targets set within the management of
the business.
www.ndtes.co.uk Page ii
saleshire@ndt-es.co.uk
NDT Equipment Supplies Limited is a company specialising in providing a broad spectrum of
inspection and test equipment for inspection companies, process plant, manufacturing and
service industries for a worldwide market.
The company operates in conjunction with a worldwide network of representatives and supplies
equipment and services to a worldwide customer base in over 50 countries.
We are pleased to provide this copy of our Product and Price guide, which contains details of
our extensive range of products, equipment and servicing. In general the prices of items are
included. For the more complex equipment with different options of supply, please contact our
office below where a specific price can be quoted for your requirements.
The company’s personnel have many years’ experience and depth of knowledge in most areas
of NDT and Inspection. We are pleased to offer advice on equipment requirements and
problem solving.
Should you not see the product you require or need further information on any of the
products listed in this catalogue, please do not hesitate to contact our sales office direct.
Prices shown in this catalogue are for guidance only and were correct at time of
printing. For latest pricing please see our web site www.ndtes.co.uk All prices are
in GB (£) Pounds Sterling and are ex-Works, unless otherwise stated.
www.ndtes.co.uk
Page iii
Delivery Terms & Conditions
All items sold are EX - WORKS un-insured in GB Pounds, other currencies on request.
We do not insure goods whilst in transit unless specifically requested to do so by you the
customer.
Goods that are ordered and dispatched without insurance immediately
become the customer’s responsibility; “the seller” is not in any way liable for uninsured
goods. Please ask for an insurance quote when you place your
order.
Claims:
a) Any consignment not delivered within 14 days of the date on “the seller’s” invoice must
notify “the seller” in writing.
b) We recommend that when you sign the carrier’s delivery note you mark the items as,
“NOT INSPECTED”.
d) “The seller” will not accept returned goods unless a prior written agreement has been
made between “the seller” and the customer. Any goods being returned
despite being correctly supplied to the customer’s specification will be subject to a
20% re-stocking charge.
www.ndtes.co.uk Page iv
saleshire@ndt-es.co.uk
PLEASE NOTE
Not all the products sold by NDT Equipment Supplies are listed. If you do not see what you are
looking for, please call our offices, our sales staff will be pleased to assist you. Please note,
some items are territory restricted.
Tel: INT + 44 (0) 1933 274833 Fax: INT + 44 (0) 01933 274113
Email: saleshire@ndt-es.co.uk
Payment
Where no credit facility has been set up with your company, pre-payment is required.
Wire transfer payments, we reserve the right to add the bank process fee.
Page v
CONTENTS
ACFM Crack Depth Gauge 74 Developing Tanks and Lids 21 Guided Wave Equipment 82-84
Adhesive Tape 8 Dew meter 68 Handling Tongs 8
Adhesion Testing 72 Dual UV / White light lamp 80 Handscan Floor Scanner 86,87
Agfa Chemicals 19 Digital Exposure Meter 24 Hanger Bars & Clips 20
Agfa Films 18 Digital Radiography 4 Hardness Tester 48
Agitator, Chemical Mixing 22 Digital Thermometer 22 Hire Contract 92
Analogue Survey Meter 7 Dosimeter 7 Hire Equipment 91
Audit ST-1 MPI Shot Timer 79 Double Envelope Cassettes 11-12 Holiday Detectors 69
Barrier Tape 8 DPI 33,41 Identification Markers 13
Bath Sprayers 32 Dry Powder Blowers 37 Image Quality Indicator 15-16
Beacons, Radiation Warning 7 Dryer, X-ray Film 22 Immersion Heater 22
Berthold Penetrameter 38 Drying Clips 20 Illuminated Magnifier x5 70
Bleeper, Radiation Warning 7 Dye Penetrant Testing 33,41 Ink Marker Pen 8
Black light (Ultraviolet) 29-38 Eddy Current Blocks 45 Inspection Mirrors 25
Blocks, Ultrasonic Test 42-45 Eddy Current Equipment 65 Intensifying Screens 13
Bridge Type Magnets 8 Elastic Straps 8 Isotopes 6
Bulbs. Spare, For Viewers 22 Electronic Thermometer 22 Kodak Chemicals 19
Cables and Connectors 61 Electronic Hardness Tester 48 Kodak Films 18
Cassette, Flexible & Rigid 11-12 Endoscopes 87 Lamp UV 29,35
Calculator. Gamma 8 Equipment Calibration 88,91 Lamp. Safelight 22
Calibration Blocks 42-45 Equipment-Guided Wave 82 Lamps Warning 7
Calibration Block USA Spec 45 Exposure Calculators 8 Lead Arrows 13
Calibration – Equipment 90 Equotip, Hardness Tester 48 Lead Intensifying Screen 13
Ceiling Safelight 22 Field Strength Indicator 38 Lead Letters and Numbers 13
Centrifuge Tube & Stand 37 Film Clamping Magnets 8 Lead Marker Box 13
Channel Hangers 20 Film Markers 8,22 Lead Marker Tapes 14
Chemicals, Film Processing 19 Film Drying Clips 20 Lead Screen Roll 13
Chemicals, Magnetic Particle 26,39 Film Dryers 22 Lead Vinyl Sheet 8
Chemicals, Penetrant 33-41 Film Quality Control 18 Lead Aprons 8
Chinagraph Pencil 8 Film AGFA / KODAK 18 Lens Magnifying 25
Clamping Magnets 8 Film Chemicals 19 Light Operated Film Marker 22
Cleaner. Penetrant 33-41 Film Folders 11,12 Light Meter – White 24
Climatic Condition Monitors 71 Film Processing Spirals 20 Light Meter – White / UV 36
Clip, Film Drying 20 Film Processor Manual 21 Magnet Test Weight 36
Paint Test Equipment 68 Film Processing Tanks /lids 21 Magnetic Accessories 35-37
Coat & Wrap Inspection 69 Film Storage Box 22 Magnetic Flux Indicator 37
Contact Clamps MPI 31 Fluorescent Penetrants 33-41 Magnetic Marker Tapes 14
Coating Thickness Gauges 67 Flux Indicators Magnaflux 32 Magnetic Particle Inspection 26-38
Collimators 5 Film Viewers 24 Magnetometer/Field indicator 38
Contrast Paint, MPI 27-38 Film Squeegee / Wiper 22 Metal analysis 73
Countdown Timer 22 Flashing Lamps 7 Magnets, Cassette Clamping 8
Couplant, Ultrasonic 61 Fluorescent Magnetic Inks 32-38 Magnets, Crack Detection 28
Crack Depth Gauges 75 Fluorescent Penetrants 33-41 Magnifiers 25
Crawler, Pipeline 86 Flux Indicators 38 Magnifier, Headband 25
Crayon, Specimen Marking 8 Gauges - Pit 66 Magnifier with Graticules 25
Crayon, High Temperature 8 Gauges - Profile 66 Manual Processing Unit 21
Cygnus Thickness Gauges 47 Gauges - Roughness 70 Marker, Film. Light Operated 22
Darkroom Apparatus 22-24 Gauges - Welding 66 Marker Paint 8
Darkroom Safelight & Filters 22 Gamma Accessories 5 Marker Storage Box 13
Darkroom Timer 22 Gamma Calculator 8 Marker Tapes 14
De-magnetisers call Gamma Collimators 5 Marking Crayons 8
Densitometers 23 Gamma Portable Projectors 5 Marking Pen 8
Density Step wedge 23 Gamma Windout Units 5 Masking Tape 8
Density Strip 23 Gamma Exposure Calculator 8 Measuring Eye Piece 25
Developer, Penetrant Testing 33-41 Gloss Meter 68 Meter – Light / UV 36
Developer X-ray 19 Guide Tubes 5 Mirrors, Inspection 25
www.ndtes.co.uk Page vi
saleshire@ndt-es.co.uk
CONTENTS
Contact us :
General Enquires
Terry Bowkett
Sales Manager
Jeanette Fleming
Office Manager
Web problems
Cheryl Holman
Accounts
Page viii
PORTABLE X-RAY EQUIPMENT
X RAY GENERATORS-
D 1603 - 160kV, 1-3mA, FOCAL SPOT 0.8mm X 0.8mm DIRECTIONAL ANGLE BEAM 60° X 40°
D 2008 - 200kV, 1-8mA, FOCAL SPOT 0.8mm X 0.8mm DIRECTIONAL ANGLE BEAM 60° X 40°
D 2258 - 225kV, 1-8mA FOCAL SPOT 2.5mm X 2.5mm DIRECTIONAL ANGLE BEAM 60° X 40°
D 2504 - 250Kv, 1-4mA FOCAL SPOT 2.5mm X 2.5mm DIRECTIONAL ANGLE BEAM 60° X 40°
D 2508 - 250kV, 1-8mA FOCAL SPOT 2.5mm X 2.5mm DIRECTIONAL ANGLE BEAM 60° X 40°
D 3006 - 300kV, 1-6mA FOCAL SPOT 2.5mm X 2.5mm DIRECTIONAL ANGLE BEAM 60° X 40°
D 3206 - 320kV, 1-6mA FOCAL SPOT 2.5mm X 2.5mm DIRECTIONAL ANGLE BEAM 60° X 40°
ALL UNITS FEATURE
- 100% DUTY CYCLE AT 40°C AMBIENT TEMPERATURE
- A MICROCONTROLLER BOARD WITH TRUE kV AND mA MEASUREMENTS
- WORKING AMBIENT TEMPERATURE: 25°C to 70°C
- A 700mm FFD TELESCOPIC CENTERING DEVICE
- TWO (2) GUARD- RINGS (TOTAL 3.6kgs )
- A BUILT IN CAROUSEL WITH ONE DIAPHRAGM 10 X 48cms ( 2 OPTIONAL )+ LEAD CAP (NOT D1603 & D2008)
WEIGHTS
- D1603 - 8kgs
- D2008, D2258, D2508, - 27kgs
- D3006 - 29kgs
- D3206 - 34kgs
- PAIR OF GUARD - RINGS - 3.6kgs EXTRA
DIMENSIONS ( WITH GUARD RINGS )
- D1603 - 120mm DIA. X 530mm HIGH
- D2008, D2258, D2508 - 346mm DIA. X 771mm HIGH
- D3006, D3206 - 346mm DIA. X 831mm HIGH
160
www.ndtes.co.uk Page 1
saleshire@ndt-es.co.uk
Back to contents page
X-RAY EQUIPMENT
X RAY GENERATORS
C2007 - 200kV, 1-7mA, FOCAL SPOT 5mm DIA. X 0.9mm ANGLE BEAM 360° x (2 x 20°)
C2257 - 225kV, 1-7mA, FOCAL SPOT 5mm DIA. X 0.9mm ANGLE BEAM 360° x (2 x 20°)
C2505 250Kv 1-5mA FOCAL SPOT 5mm DIA. X 0.8mm ANGLE BEAM 360° x (2 x 20°)
C2505 - 250kV, 1-5mA, FOCAL SPOT 5mm DIA. X 0.9mm ANGLE BEAM 360° x (2 x 20°)
C3005 - 300kV, 1-5mA, FOCAL SPOT 5mm DIA. X 0.9mm ANGLE BEAM 360° x (2 x 20°)
C3205 - 320kV, 1-5mA, FOCAL SPOT 5mm DIA. X 0.9mm ANGLE BEAM 360° x (2 x 20°)
FULL TECHNICAL DATA SHEETS AND PRICES FOR ALL X-RAY UNITS ARE AVAILABLE ON REQUEST
SCU286
NORMALLY OPERATING WITH CRAWLER CONTROL UNITS CCU 186 AND CCU 086 SERIES
X RAY GENERATORS:
C1603 - 160kV, 1-3mA FOCAL SPOT 4mm DIA. X 0.5mm ANGLE BEAM 360° (2X20°)
C2004 - 200kV, 1-4mA FOCAL SPOT 5mm DIA. X 0.5mm ANGLE BEAM 360° (2X20°)
C2254 - 225kV, 1-4mA FOCAL SPOT 5mm DIA. X 0.5mm ANGLE BEAM 360° (2X20°)
C2504 - 250kV, 1-4mA FOCAL SPOT 5mm DIA. X 0.5mm ANGLE BEAM 360° (2X20°)
C3003 - 300kV, 1-3mA FOCAL SPOT 5mm DIA. X 0.8mm ANGLE BEAM 360° (2X20°)
C3203 - 320kV, 1-3mA FOCAL SPOT 5mm DIA. X 0.8mm ANGLE BEAM 360° (2X20°)
WEIGHTS:
- C1603 - 8kgs WITH CCU 086 CONTROL UNIT
- C2004, C2254, C2504 - 26kgs
- C3003 - 28kgs
- C3203 - 34kgs
DIMENSIONS:
- C1603 - 124mm DIA. X 510mm HIGH (INCLUDING CCU 086)
- C2004, C2254,C 2504 - 248mm DIA. X 697mm HIGH
- C2003, C3203 - 248mm DIA. X 757mm HIGH
CCU186
CRAWLER CONTROL UNIT CCU 086 CRAWLER CONTROL UNIT CCU 186
FOR C1603 ONLY
- INPUT LINE FROM 40TO 60VDC TO 48VDC NOMINAL -INPUT LINE FROM 85 TO 140VDC-120VDC NOMINAL
-1 kV STEP TUBE VOLTAGE KEYBOARD SELECTION -1 kV STEP TUBE VOLTAGE KEYBOARD SELECTION
-0.1mA STEP CURRENT TUBE KEYBOARD SELECTION -0.1mA STEP CURRENT TUBE KEYBOARD SELECTION
(MIN 1mA) (MIN 1mA)
-DC INPUT VOLTAGE REGULATION BETTER THAN 0.2% - DC INPUT VOLTAGE REGULATION BETTER THAN 0.2%
-SEMI-AUTOMATED WARM UP PROCEDURE -SEMI-AUTOMATED WARM UP PROCEDURE
-WORKING AMBIENT TEMPERATURE - 25°C to 85°C -FULLY COMPATIBLE WITH ALL SITE-X TUBEHEADS
-1kg FULLY MOUNTED ON THE BACK OF THE -WORKING AMBIENT TEMPERATURE - 25°C to 85°C
C1603 TUBEHEAD -4kgs FULLY MOUNTED INCLUDING AN ALUMINIUM
-OVERALL SIZE: SEE C1603 FULL SIZE ABOVE COOLER
-OVERALL SIZE: 170(H) X 280(D) X 162 (W) mm
CONVERSION KIT - FROM " CRAWLER " TO " STANDARD " ( NOT C1603 )
COMPRISING:
- THE SITE - X SCU 286 STANDARD CONTROL UNIT
- ONE GUARD -RING FOR COOLING SIDE (1.8kgs)
- ONE GUARD - RING FOR CONNECTOR SIDE (1.8kgs)
- 3 X 700mm FFD TELESCOPIC CENTERING DEVICES
- A 6.0kgs – 20m TUBE HEAD / SCU286 INTERCONNECTION CABLE
- A 1.7kgs – 10m POWER SUPPLY CABLE
- A BAG FOR CABLES AND ACCESSORIES
- A SET OF SCU286 USER MANUALS IN ENGLISH
www.ndtes.co.uk Page 3
saleshire@ndt-es.co.uk
Back to contents page
X-RAY EQUIPMENT
Page 4
Back to contents page
GAMMA RAY EQUIPMENT
Page 5
Back to contents page
RADIOACTIVE ISOTOPES
Prices below are meant as a guide only, please ask for a latest price before
committing to a purchase order. Other activity amounts are available.
All buyers may be asked for an “End User Statement” to satisfy UK, EU & USA
laws, and may be subject to a export licence outside the UK,
IRIDIUM 192
Activity Active Dimensions Price (£’s)
100 Ci 3mm x 2.5mm POA
80 Ci 3mm x 2.0mm POA
70 Ci 3mm x 2.0mm POA
60 Ci 2mm x 2.5mm POA
50 Ci 2mm x 2mm POA
40 Ci 2mm x 1.5mm POA
30 Ci 2mm x 1mm POA
20 Ci 2mm x 1mm POA
SELENIUM 75
Activity Active Dimensions Price (£’s)
20Ci 2.00mm F Spherical POA
30Ci 2.50mm F Spherical POA
40Ci 2.50mm F Spherical POA
50Ci 2.85mm F Spherical POA
60Ci 2.85mm F Spherical POA
70Ci 3 x 3mm Quasi - Spherical POA
80Ci 3 x 3mm Quasi - Spherical POA
RM2000
www.ndtes.co.uk Page 6
saleshire@ndt-es.co.uk
Back to contents page
RADIATION SAFETY
Tempil Stick
Handling Tongs
www.ndtes.co.uk Page 8
saleshire@ndt-es.co.uk
Back to contents page
RADIATION SIGNS
Radiation Signs
Rectangular signs in white PVC printed in red, yellow and black.
Trefoil warning signs are in yellow and black.
Prohibition signs are in red and black.
Each has a space for the name and telephone number of the Radiation Protection Supervisor. All of the
signs are to the same basic design, conforming to the current ionizing radiations regulations. They dif-
fer in the wording beneath the trefoil and in the prohibition. Signs are illustrated on the following page.
Wherever a Controlled or Supervised Area is designated the signs must indicate all of the
following :- The designation of the area; The nature of the radiation source & The risks arising.
www.ndtes.co.uk Page 9
saleshire@ndt-es.co.uk
Back to contents page
RADIATION SIGNS
www.ndtes.co.uk Page
Page10
10
saleshire@ndt-es.co.uk
Back to contents page
PLASTIC CASSETTE INFORMATION
Plastic Cassettes
All types of Single-Envelope Plastic Cassettes are of the same design. They consist of a
single envelope, open at one end, through which film and screens are loaded and unloaded.
The open ends of the envelopes fold over, producing an effective light seal. They are then held
closed by means of VELCRO’ nylon fastener.
There is an extra finger-tab at the bottom to assist in holding the cassette to the bench for
easier and quicker unloading. Closure is normally made on the shorter side of a rectangular
cassette. Special versions, with the opening on the long side, can be made to order.
STANDARD SINGLE ENVELOPE CASSETTES These are made from 400 micron black PVC
and have become, over the years, the standard cassette for industry. We do not recommend
their use in very cold weather and advise great care in loading and unloading them in sub-zero
temperatures.
REINFORCED SINGLE ENVELOPE CASSETTES These are made from thin, yet strong PVC/
Nylon/PVC laminated material. The nylon reinforcement is in the form of a mesh and reduces
the tendency of the PVC to split at the seams after much use. The PVC laminate retains its
flexibility in cold
climates. Reinforced cassettes are therefore more suitable for use at low
temperatures than the Standard type.
ONE SEAM SINGLE ENVELOPE CASSETTES These represent the first major advance in cas-
sette design since the introduction of ‘VELCRO’ fastening. Constructed in rugged nylon-
reinforced PVC, they are made to outlast any other type of flexible cassette. They are
constructed without side-seams, there is just one joint on the back of the cassette. This design
overcomes the weakness of other single envelopes that are welded along the sides; there is no
tendency to split.
The Cassettes are made from specially - formulated, heavy-duty, nylon-reinforced PVC. They
are black on the inside for light-tightness and yellow on the outside for easy recognition.
HEAVY DUTY SINGLE ENVELOPE CASSETTES These are made from double-thickness ma-
terial consisting of one layer of standard PVC and one layer of the nylon-reinforced
material. This combination produces a cassette capable of withstanding very tough treatment at
normal temperatures.
DOUBLE ENVELOPE CASSETTES These consist of two plain black envelopes without any
means of closure. Film and screens are loaded into the inner envelope, the smaller of the two.
This is then
inserted, open end first, into the larger outer envelope. Light – tightness is
assured due to the open end of the inner is up against the closed end of the outer. They are
made from the standard 400 micron material and are clearly marked ‘INTEX BACK’ on both the
inner and the outer envelope for easy identification in the darkroom and out on site.
The main advantage of Double-Envelope Cassettes is that they lie perfectly flat, having no
fold-over ends or ‘VELCRO’ fastening.
www.ndtes.co.uk Page 11
saleshire@ndt-es.co.uk
Back to contents page
RADIOGRAPHIC ACCESSORIES - CASSETTES
NYLON (£)
SIZE STANDARD (£) ONE SEAM (£) DOUBLE (£) HEAVY DUTY (£)
Reinforced
Standard Cassettes
www.ndtes.co.uk Page 12
saleshire@ndt-es.co.uk
Back to contents page
RADIOGRAPHIC ACCESSORIES – SCREENS - MARKERS
Lead Tapes
www.ndtes.co.uk Page 14
saleshire@ndt-es.co.uk
Back to contents page
RADIOGRAPHIC ACCESSORIES – IQI’s
1 FE EN 6 FE EN 10 FE EN 13 FE EN
N Wire Diameter Wire Diameter Wire Diameter Wire Diameter
No. No. No.
o. (mm) (mm) (mm) (mm)
1 3.20 6 1.00 10 0.40 13 0.20
2 2.50 7 0.80 11 0.32 14 0.16
3 2.00 8 0.63 12 0.25 15 0.125
4 1.60 9 0.50 13 0.20 16 0.100
5 1.25 10 0.40 14 0.16 17 0.080
6 1.00 11 0.32 15 0.125 18 0.063
7 0.80 12 0.25 16 0.100 19 0.050
Use for material Use for material Use for material Use for material
40 – 160mm thick 12.5 – 50mm thick 5 – 20mm thick 2.5 – 10mm thick
www.ndtes.co.uk Page 15
saleshire@ndt-es.co.uk
Back to contents page
RADIOGRAPHIC ACCESSORIES – IQI’s
Each indicator consists of a series of six parallel wires of different thickness and 25 or 50mm long
mounted between two thin sheets of transparent, flexible PVC.
Lead characters identify the wire thickness and the material. The letters ASTM are also included.
Prices on application
www.ndtes.co.uk Page 16
saleshire@ndt-es.co.uk
Back to contents page
See page 7
for prices
Page 17
Back to contents page
RADIOGRAPHIC FILM; QUALITY CONTROL
Please note: due to the fluctuation in price of Silver the above Film prices should be confirmed
prior committing to a purchase order. Prices are correct at date of printing
Quality Control
A simple method to determine Archival Quality of a processed X-ray film. Also indicates badly
fixed and/or Washed films which may require additional treatment.
Structurix Thio-Test Kit (Colour Comparator Set) requires:
Cat Number Description Price (£)
3M2HM Thiotest Reagent 35cc POA
FT5AL Thiotest Colour Comparator POA
3UEPB Structurix Certified Denstep (Certified Traceable to NBS) POA
Exposed, unprocessed PMC Strips in individual daylight packing used to Monitor the performance
of Processed Chemical solutions for high quality processing
3Q210 Processor Monitoring Control (PMC) Strip (Box 50) POA
www.ndtes.co.uk Page 18
saleshire@ndt-es.co.uk
Back to contents page
RADIOGRAPHIC ACCESSORIES - CHEMICALS
www.ndtes.co.uk Page 19
saleshire@ndt-es.co.uk
Back to contents page
RADIOGRAPHIC ACCESSORIES – FILM PROCESSING
Processing Tanks
Capacity Grey PVC Stainless Steel
13.5 litres 3 Gallons 53.00 150.00
22.5 litres 5 Gallons 60.00 175.00
45.0 litres 10 Gallons 70.00 190.00
Processing Tank Lids
Capacity Grey PVC Stainless Steel
13.5 litres 3 Gallons 22.10 60.00
22.5 litres 5 Gallons 22.60 60.00
45.0 litres 10 Gallons 25.10 70.00
www.ndtes.co.uk Page 20
saleshire@ndt-es.co.uk
Back to contents page
RADIOGRAPHIC EQUIPMENT – FILM PROCESSING
Rigid PVC material with thermostatically controlled heater and digital temperature display. Prices
include PVC tanks listed below. Requires suitable cold water and power supply.
Film Processors
X-ray film processor especially optimised for the development of indus-
OPTIMAX
trial films, supplied with a complete set of accessories, such as e.g. light POA
2010 NDT
protection cover, replenishment containers and connecting hoses
NDT mobile for mobile use, such as installations in trucks or mini vans POA
COMPACT 2 X-ray film processor, extremely high capacity POA
Full specifications available on the above processors, other manufacturers products also available
Packing and Shipping Extra
www.ndtes.co.uk Page 21
saleshire@ndt-es.co.uk
Back to contents page
RADIOGRAPHIC EQUIPMENT – LAMPS, DRYERS, SUNDRIES
Safe lamps Price £
2’ Fluorescent Safe Light complete with fixings 85.75
Spare UV Tube for Above 58.00
‘A’ Dome Red Safelight 40.00
Safelamp Bulb, 25watt BC fitting POA
Glow Bright Safelight 260.00
Sundry
Price £
Items
Tank Syphon, Plastic 35.00
Immersion Heater, 500 watt, 240 volt, figure ‘8’ type 247.50
Mixing Paddle, Plastic 25.00
Film ‘Squeegee’, Approx 13cm ( 4.5” ) Rubber Blade 25.00
Film ‘Squeegee’, Approx 23cm ( 9” ) Rubber Blade 40.00
Floating Thermometer 35.00
Dark Room Wall Clock (Luminous Figures & Hands) 38.50
Triple Digital Timer 19.00
Digital Stopwatch, Plastic Case 9.98
Film Storage Box for 70mm Roll Films with 25 compartments POA
Light Operated Film Marker 350.00
Paper Folders (boxes of 500) P.O.A
Film Dryers Price £
Structurix DR Roller Film Dryer, 63cm x 60cm x 35cm
EWTHW 220/240v 50/60Hz or 120v 60Hz, Full specification available on P.O.A
request
Darkroom Safelight
Structrix Dryer
Page 22
www.ndtes.co.uk saleshire@ndt-es.co.uk
Back to contents page
DENSITOMETERS
X-Rite 301
Densitometer DDS3
X-Rite 341
X-Rite 361T
X-Rite 331
www.ndtes.co.uk Page 23
saleshire@ndt-es.co.uk
Back to contents page
RADIOGRAPHIC EQUIPMENT – VIEWERS, DENSITOMETERS, METERS
Luminance -The screen luminance required depends on the density of the radiographs. The
following luminance levels are recommended for the perception of information at various levels.
The luminance (or brightness) of the illuminated radiograph shall be not less than:
30 cd/m2 for film densities < 2.5
10 cd/m2 for film densities > 2.5
and wherever possible, approximately 100 cd/m2 or higher. These minimum values require the
following screen luminance’s.
L-308S Flashmate Digital exposure meter for ambient and flash light 245.00
Model 3
Model A2
L-308S
Flashmate
Model A8L
www.ndtes.co.uk Page 24
saleshire@ndt-es.co.uk
Back to contents page
INSPECTION MIRRORS – MAGNIFIERS – VELCRO TAPES
Page 25
www.ndtes.co.uk saleshire@ndt-es.co.uk
Back to contents page
NDT EQUIPMENT SUPPLIES LTD ARE AN OFFICIAL DISTRIBUTOR OF
MAGNAFLUX PRODUCTS
Page 26
www.ndtes.co.uk saleshire@ndt-es.co.uk
Back to contents page
MAGNETIC PARTICLES
Page 27
www.ndtes.co.uk saleshire@ndt-es.co.uk
Back to contents page
WET HORIZONTAL MAGNETIC PARTICLE INSPECTION UNITS
Page 28
www.ndtes.co.uk saleshire@ndt-es.co.uk
Back to contents page
U.V.(A) [BLACK] LIGHTS AND METERS
Page 29
www.ndtes.co.uk saleshire@ndt-es.co.uk
Back to contents page
WET HORIZONTAL MAGNETIC PARTICLE INSPECTION UNITS
Page 30
www.ndtes.co.uk saleshire@ndt-es.co.uk
Back to contents page
MAGNETIC PARTICLE ACCESSORIES
www.ndtes.co.uk Page 31
saleshire@ndt-es.co.uk
Back to contents page
MAGNETIC PARTICLE ACCESSORIES
Cables Connectors
Part No Model Description Price
1238 108mm2 Eitherend Connector
1574 Eitherend Lug Adapter 108mm2
1576 Eitherend Lug Adapter, 90 degree, 108mm2
15027A3 Eitherend Lug with Stud
Control Cable
Part No Model Description
001C057 Remote Control Lead with Hand Button
Other Operating Accessories
Part No Model Description
Split Coil, 300mm Diameter. 108mm2 Cable with
008C039
Eitherend
Split Coil, 630mm Diameter. 108mm2 Cable with
008C042
Eitherend
Wet Particle Bath Sprayers
Part No Model Description
004G004 Magnaglo Hand Sprayer (Polyspray)
Dry Powder Blowers
Part No Model Description
008D003 Powder Spray Bulb (Dispenser)
Test Pieces With Artificial Defects
Part No Model Description
519630 KSC 230 Std QQI Model, Flaw Depth 30% of Shim Thickness
Std QQI Model, Flaw Depth 30% of Shim Thickness
519631 KSC4-230
4 Circles Per Sheet
Variable Depth QQI Model, Flaws 20%, 30%, 40% of
519632 KSCT-234
Shim Thickness
008M004 TYPE G Magnetic Indicator Strips (G) General (5 Pack)
008M005 TYPE A Magnetic Indicator Strips (A) Aerospace (5 Pack)
026T001 TEST PIECE Current Flow 0-1000Amp (BS 6072 & RPS 700)
026T003 TEST PIECE Current Flow 1000-3000Amp (RPS 700)
026T004 TEST PIECE Current Flow 3000-5000Amp (RPS 700)
026T002 TEST PIECE Magnetic Flow / Coil (RPS 700)
026T041 TEST PIECE Magnetic Flow / Coil (BS 6072)
026T006 TAM 150537 Continuous Method Test Block (75130)
026T005 TEST PIECE Ketos Steel Test Ring (159999)
189838 TEST PIECE Magnetic Particle Test Bar (MIL STD)
Centrifuge Tubes & MPI Publications
Part No Model Description
020B001 Book – ‘Principles of MPI Testing’
www.ndtes.co.uk Page 32
saleshire@ndt-es.co.uk
Back to contents page
PENETRANT SYSTEMS
www.ndtes.co.uk Page 33
saleshire@ndt-es.co.uk
Back to contents page
PENETRANT SYSTEMS
Spraying Equipment
Price
Part Number Model Description
POA
017S002 VECTOR R90 Electrostatic Penetrant Spray
018P030 PPL1201 Electrostatic Drum Pump Unit (25Ltr)
81-2300 Electrostatic Drum Pump Unit (200Ltr)
OPTIFLEX B Electrostatic Dry Developer Spray
20L Hydrophilic Remover Foam Applicator (20Ltr)
50L Hydrophilic Remover Foam Applicator (50Ltr)
FILTRATION SYSTEMS
Consumables
Part Number Model Description
079C002 Activated Carbon Granules (25Kg Bag)
015F004 Replacement Coalescer Cartridge
015F029 S200 Replacement 200 litre Carbon Drum
www.ndtes.co.uk Page 34
saleshire@ndt-es.co.uk
Back to contents page
SPOTCHECK
www.ndtes.co.uk Page 35
saleshire@ndt-es.co.uk
Back to contents page
MPI – MAGNETS, YOKES, WEIGHTS
Magnetic Particle Inspection
Permanent Magnets Price (£)
Medium Size Horse Shoe Magnet (Without Wheels) RPNSA 190.00
Large Size Horse Shoe Magnet (Without Wheels) RPNSL 222.00
ELYMAG 1 Magnet with Hinged Legs and Adjustable Pole Pieces 310.00
Fleximag, Magnet with Flexible Handles to allow 360 degree Inspection 232.00
Polymag, Encapsulated Horse Shoe Magnet 357.00
Electro Magnetic Yokes Price (£)
Adjustable Yoke 110 volt AC (NDT Supply) 457.00
Adjustable Yoke 240 volt AC (NDT Supply) 457.00
Spare Switch Assembly (NDT Supply) 49.00
Induction Light for above Electromagnets 85.00
POLYMAG ELYMAG 1
LUMACHECK
www.ndtes.co.uk Page 36
saleshire@ndt-es.co.uk
Back to contents page
MAGNETIC PARTICLE - ACCESSORIES
www.ndtes.co.uk Page 37
saleshire@ndt-es.co.uk
Back to contents page
MAGNETIC PARTICLE INSPECTION
Ultra Violet Lamps Price (£)
Lumazon LED UV & White battery portable Inspection Lamp P.O.A
B-100AP UV Lamp, 240 volt P.O.A
UV-LED Torch, UV intensity approx. 6000µW/cm² on a distance of 750mm P.O.A
H44GS Spot Lamp 100w ES Fitting 85.75
CFL 100F Dual Voltage Ultra Violet Lamp 685.00
CFL 100F Dual Voltage Ultra Violet Lamp c/w Adjustable Arm 750.00
Accessories and Spares Price (£)
Spare Bulb for EFL 400F Lamp 90.00
Spare Bulb for B-100AP (Part Number: 34-0054-01) 55.00
Pear Shaped Lamp HPW 125w ES Fitting or 3 Pin Bayonet Fitting 52.00
Spare Glass Filter for CFL100F Lamp B006 52.65
Spare Filter/Bezel for B-100AP P.O.A
Spare Finger Guard for B-100AP P.O.A
Spare Lamp Visor for B-100AP P.O.A
Flux Indicators Price (£)
Surecheck Indicators Type 1 (Brass) General 68.10
Surecheck Indicators Type 2 (Silver) Aerospace 70.00
Flux Indicator Type 4 P.O.A
Berthold Penetrameter 340.00
A.S.M.E. Indicator 232.00
Magnetometers/Field Indicators Price (£)
Model 25 – Magnetometer (calibrated) (20+0-20) 215.00
Magnetometer (calibrated) (20+0-20) Pocket version 80.00
UV Torch
Pocket
CFL 100F Ultraviolet Version Calibrated Field
Lumazon LED Lamp Lamp with Adjustable Indicator
Arm Attachment
CFL 100F
Ultraviolet Lamp Field Indicators
ASME Field Berthold Penetrameter
Indicator
www.ndtes.co.uk Page 38
saleshire@ndt-es.co.uk
Back to contents page
MAGNETIC PARTICLE INSPECTION - CHEMICALS
www.ndtes.co.uk Page 39
saleshire@ndt-es.co.uk
Back to contents page
DYE PENETRANT - CHEMICALS
www.ndtes.co.uk Page 40
saleshire@ndt-es.co.uk
Back to contents page
DYE PENETRANT – CHEMICALS / TEST EQUIPMENT
Apply
Penetrant &
Allow Contact
Time
Dry
Dry
Apply Apply Apply
Developer Developer
Developer
Apply
Developer
Record
Results
Allow Contact
Time & Inspect
www.ndtes.co.uk Page 41
saleshire@ndt-es.co.uk
Back to contents page
Calibration Blocks
ORDER SHAPE TYPE DESCRIPTION/ STANDARD MATERIAL/
CODE (Not to Scale) APPLICATION MADE TO SIZE
Page 42
Back to contents page
Calibration Blocks
Standard Test Block Profiled notches in curved samples Notches in Tubes and Bars
0.2mm,0.5mm, 1.0mm Deep Longitudinal and transverse
Page 43
Back to contents page
CALIBRATION BLOCKS
Notes
.Prices include *Carrying cases where indicated. Note depending on block, these may be either a hard plastic,
rugged fabric or leather .
The above blocks are the most popular and in many cases can be Ex-Stock.
We are pleased to quote for manufacture in free issue material.
www.ndtes.co.uk Page 44
saleshire@ndt-es.co.uk
Back to contents page
CALIBRATION BLOCKS
Ultrasonic – USA Specifications
- Carbon Steel/Stainless Steel/Aluminium (all Prices On Application)
11W Block type 1 Similar to Number 1 Block, Contains 25mm Arc
11W Block type 2 Similar to Number 1 Block with 50 & 100mm Radius
ASTM Distance / Amplitude Set 19 Blocks
ASTM Distance / Area Set 10 Blocks
ASTM Area / Amplitude Set 8 Blocks
ASTM Sensitivity / Resolution Set 10 Blocks
ASTM E317 2 Hole & 6 Hole—Resolution & Linearity
NAVSHIPS Block Distance - Amplitude / Sensitivity Levels
AWS DSC Shear wave calibration - Distance & Sensitivity
AWS DS Longitudinal wav calibration - Distance & Sensitivity
AWS DC Shear wave calibration - Distance
AWS RC Shear wave calibration - Resolution
AWS SC Shear wave calibration - Sensitivity
AWS LSW 4 Steps - Thickness & Linearity
AWS LSW 5 Steps - Thickness & Linearity
MAB ROMPAS Block Miniature Angle Beam Block
ASME V Block Range 19mm to 225mm - 6 Blocks
API RP 2X Level A & Level C Calibration Blocks
3 Notch Carbon Steel 0.2mm, 0.5mm, 1.0mm Deep Notches EN1A 119.00
3 Notch Stainless Steel 0.2mm, 0.5mm, 1.0mm Deep Notches 304 or 316 234.00
3 Notch Aluminium 0.2mm, 0.5mm, 1.0mm Deep Notches 7075 152.00
3 Notch Titanium 0.2mm, 0.5mm, 1.0mm Deep Notches specify grade 339.00
3 Notch Magnesium 0.2mm, 0.5mm, 1.0mm Deep Notches AZ310B or pure 180.00
Weldscan (0.5, 1.0 & 2.0mm slots with lift off spacers to EN1711 )
3 Notch Carbon Steel 0.5 – 1-2mm Notches 4 x 0.5 Lift off Spacers EN1A 204.00
3 Notch Stainless Steel 0.5 – 1-2mm Notches 4 x 0.5 Lift off Spacers 304 or 316 258.00
3 Notch Aluminium 0.5 – 1-2mm Notches 4 x 0.5 Lift off Spacers 7075 227.00
3 Notch Titanium 0.5 – 1-2mm Notches 4 x 0.5 Lift off Spacers 396.00
Price £
SONATEST:- D 10 SERIES (Various options and accessories available) P.O.A
D 20 SERIES (Various options and accessories available) P.O.A
SITESCAN 123 (Various options and accessories available) P.O.A
RAILSCAN 125 (Various options and accessories available) P.O.A
SITESCAN 150 (Various options and accessories available) P.O.A
SITESCAN 250 (Various options and accessories available) P.O.A
MASTERSCAN 350 (Various options and accessories available) P.O.A
MASTERSCAN 380 (Various options and accessories available) P.O.A
POWERSCAN 450P (Various options and accessories available) P.O.A
Veo 16:64 Phased array standard kit (options and accessories additional) P.O.A
A full range of Sonatest products available, please ask for details
GE Inspection Tech:- USM35X ; optional versions available, DAC, TCG AWS etc P.O.A
All GE products USM36X (Various options and accessories available) P.O.A
Subject to AWS : DGS : SWP : BWA : 3G : Data Logger : Phantom PRF P.O.A
availability DAC/JISDAC/CNDAC P.O.A
USM GO P.O.A
USM GO + P.O.A
P.O.A
USN60 (Various options and accessories available) P.O.A
PHASOR XS Portable Phased Array Equipment, --probes extra-- P.O.A
DANATRONICS:- Hand-Held Digital Ultrasonic Flaw detector / thickness gage, A;& B
scan P.O.A
(Various options and accessories available)
Other models available, prices and specification on request. P.O.A
KARL DEUTSCH:- ECHOGRAPH 1090 P.O.A
ECHOGRAPH 1094— Portable 8 Channel Multiplex UT System P.O.A
ECHOMETER 1075 Basic P.O.A
Training can be offered , please refer to relevant pages in this catalogue P.O.A
www.ndtes.co.uk Page 46
saleshire@ndt-es.co.uk
Back to contents page
ULTRASONIC THICKNESS GAUGES – HARDNESS TESTERS
Price (£)
Cygnus 1 - Heavy Duty Model Complete Kit With 2.25mhz 13mm Heavy Duty Remote Probe 2,130.00
Cygnus 1 - Intrinsically Safe Model Complete Kit With 2.25mhz 13mm Heavy Duty Probe 2,495.00
Cygnus 1 - Underwater Model Complete Kit With 2.25mhz 13mm Uw Remote Probe And Top
P.O.A
side read out, VARIATIONS AVAILABLE
Cygnus 1 - Underwater Model Complete Kit With 2.25mhz 13mm Uw Remote Probe 3,345.00
Cygnus 2 - Basic Model Complete Kit With 2.25mhz 13mm Remote Probe 1,595.00
Cygnus 4 - LCD - Basic Model Complete Kit With 2.25mhz 13mm Remote Probe 1,595.00
Cygnus 6+ - PRO. Mk5 kit, probes and cables available separately die to choice and options 1,910.00
Cygnus R O V units available, P.O.A
ALL GE products subject to availability
GE - DM5E Serries of wall thickness gauge P.O.A
GE - DMS Go series portable thickness gauge P.O.A
GE - CL 5 Precision thickness gauge P.O.A
GE - Pocket Mike Complete With Carry case, Manual, Integral Probe, Battery & Couplant. P.O.A
Demeq - QH5 D Complete with Type “D” Impact Device, Data Logger , Cable, Coupling Paste,
P.O.A
Software, Manual, Carry Case
Demeq - QH5 G Complete with Type “G” Impact Device, Data Logger , Cable, Coupling Paste,
P.O.A
Software, Manual, Carry Case
Demeq - QH5 M Complete with Type “M” Multi-Impact Devices, Data Logger , Cable, Coupling
P.O.A
Paste, Software, Manual, Carry Case
Page 47
Back to contents page
ULTRASONIC THICKNESS GAUGES – HARDNESS TESTERS
Price (£)
DANATRONICS:- EHC - 09 Hand-Held Digital Ultrasonic thickness gauge, with various options:
- Data logger; B-Scan, Monochrome or colour display; coating rejection; live waveform Complete
With Battery, Probe, Cable, Carry Case, Couplant, Manual, Certification. PRICES START FROM 990.00
A full range of probes of different size and frequencies available, Data sheet / spec on request
PosiTector UTG - Complete With Transducer, Couplant, Carry Case, Manual & IR Port 670.00
Sonatest – B Gage Complete With Transducer, Couplant, Carry Case, Manual 594.00
Sonatest - Sonogage IV 699.00
Sonatest - T Gage V series from 810.00
Sonatest - Microgage series from 1085.00
Dakota Mx-1 Complete With Battery, Probe, Cable, Carry Case, Couplant, Manual, Certification. 650.00
Dakota Mx-2 Complete With Battery, Probe, Cable, Carry Case, Couplant, Manual, Certification. 750.00
Dakota Mx-3 Complete With Battery, Probe, Cable, Carry Case, Couplant, Manual, Certification. 995.00
Dakota Mx-5 Complete With Battery, Probe, Cable, Carry Case, Couplant, Manual, Certification. 1,496.00
Dakota Mxv A & B scan ,C/w, Cable, Carry Case, Cert, Manual And Software P.O.A
Demeq also available, please contact us for details P.O.A
Full Range Of data sheets and Probes Available on the above manufacturers on Request.
Hardness Testers
Equotip 550 Kit C/W Impact device Leeb D, cables & software ( other impact devices available ) 5,000.00
Equotip Piccolo 2 Kit C/W Impact device, cables, software & test block 3,050.00
Equotip Bambino including test block 2,350.00
Dynapocket Basic complete Kit prices from (other versions available) From P.O.A
Dynamic – MIC10, Subject to availability P.O.A
Buchholz Indentation Tester P.O.A
Demeq also available, please contact us for details P.O.A
A Full Data Sheet And Specification For Each Of The Above Items Is Available On Request.
www.ndtes.co.uk Page 49
saleshire@ndt-es.co.uk
Back to contents page
ULTRASONIC PROBES – NDT EQUIPMENT SUPPLIES
www.ndtes.co.uk Page 50
saleshire@ndt-es.co.uk
Back to contents page
ULTRASONIC PROBES – GE (Krautkramer)
Page 51
www.ndtes.co.uk Back to contents page saleshire@ndt-es.co.uk
ULTRASONIC PROBES – GE (Krautkramer)
Page 52
www.ndtes.co.uk saleshire@ndt-es.co.uk
Back to contents page
ULTRASONIC PROBES – SONATEST
Miniature Angle Probes SA series Large Angle Probes medium damped,
Price £ Price £
10mm – 5MHz Economy version 1;2 & 4MHz
SA5-38 add T top entry add R rear P.O.A LSA 1-45 add T top entry add R rear P.O.A
SA5-45 as standard all Probes are LSA 1-60
SA5-60 with Subvis connectors LSA 1-70
SA5-70 LSA 2-45
SA5-80 LSA 2-60
SA5-90 LSA 2-70
SA-Series 10mm – 2 MHz Price £ LSA 4-45
SA2-38 add T top entry add R rear P.O.A LSA 4-60
SA2-45 LSA 4-70
SA2-60 HOT work probes 400°C int. 2/4MHz Price £
SA2-70 HSA2-45 add T top entry add R rear P.O.A
SA2-80 HSA2-60
SAO Series - 10mm - 4 MHz Price £ HSA2-70
SAO4-45 add T top entry add R rear P.O.A HSA4-45
SAO4-60 HSA4-60
SAO4-70 HSA4-70
SA0 Series – 10mm – 2 MHz Price £ Other angles available
SAO2-45 add T top entry add R rear P.O.A Twin Angle Probes CDA series
Price £
SAO2-60 10mm economy version, 2 & 4 MHz
SAO2-70 CDA 2-45 add T top entry add R rear P.O.A
Other angles available CDA 2-60
ORION series High specification CDA 2-70
Price £
4 MHz 10mm CDA 4-45
Orion 4-38 add T top entry add R rear P.O.A CDA 4-60
Orion 4-45 CDA 4-70
Orion 4-60 Suggested Cables for use with all
Price £
Orion 4-70 Twin Angle Probes
Orion 4-90 Twin probe cable Lemo 1 type TPC-LS P.O.A
Other angles available For Microdot add “D”
ORION series High specification For mini Lemo 00 “ add “Z”
Price £
2 MHz 10mm BNC instrument end available
Orion 2-38 add T top entry add R rear P.O.A Boiler Tube Inspection probes Price £
Orion 2-45 5MHZ,60° Twin Angle P.O.A
Orion 2-60 5MHZ,70° Twin Angle
Orion 2-70 Other angles available
Other angles and frequencies are Subvis connectors are standard on all
available price on request probes unless stated otherwise
Suggested Cables for use with all Underwater cables available please
P.O.A
Single Angle Probes, specify length and connector types
Single probe cable Lemo 1 type PC-LS P.O.A For mini Lemo ” add “Z”
For mini Lemo 00 “ add “Z” For Microdot ” add “D”
For Microdot ” add “D” Cable length are 2 metres
Re-shoes (kit of 10) for angle probe Additional lengths single cable per metre
Adhesive for above 5grm bottle Additional lengths twin cable per metre
www.ndtes.co.uk Page 53
saleshire@ndt-es.co.uk
Back to contents page
ULTRASONIC PROBES - SONATEST
Single Longitudinal probes High
Single Longitudinal probes protective
damped, ceramic faced, Subvis Price £ Price £
membrane Subvis connector
connector
SLH1-25, 1MHz, 25mm Lemo P.O.A SLF1-25 * P.O.A
SLH2-10, 2MHz, 10mm SLF2-10
SLH2-20, Lemo SLF2-20 *
SLH4-10, 4MHz, SLF4-10
SLH4-15, SLF4-20 *
SLH5-10, 5 MHz, SLF5-10
SLH5-15, SLF5-15
SLH10-5, 10 MHz, 5mm SLF5-20 L
SLH10-10 SLF5-25 L
Other sizes and frequencies available * For Lemo1 connector add “L”
Single Longitudinal probes High
Twin Compression probes, medium
damped, low profile, Subvis
damped, Subvis connector
connector
SLP1-20, 1MHz P.O.A CD1-15 P.O.A
SLP2-10, 2MHz CD1-20
SLP5-5, 5 MHz CD2-10
SLP5-10, CD2-15
SLP10-5, 10 MHz CD2-20
SLP10-10, CD4-10
Other sizes and frequencies available CD5-10
Single Longitudinal probes High CD5-15
damped economy, Subvis connector CD5-20
SLG2-10 P.O.A Twin Compression probes, High tem-
SLG4-10 perature, Subvis connector 400° int.
SLG5-10 CD2-10HT P.O.A
SLG10-10 CD2-15HT
SLG4-20 CD2-20HT
Single Longitudinal probes Low CD4-10HT
damped economy, Subvis connector CD5-10HT
SLC1-20 P.O.A CD5-15HT
SLC2-10 Twin Compression probes, , Subvis
SLC2-15 connector, Plastic flared skirt
SLC2-20 GEM2-10 P.O.A
SLC2-25 GEM4-10
SLC4-10 GEM5-10
SLC4-20 GEM5-10(F) short-focussed
SLC5-10 GEM2-10High Temp version
LARGE LOW FREQUENCY – SINGLE GEM5-10High Temp version
LONGITUDINAL, Lemo 1 connectors For mini Lemo add “Z”
LLFO.5-34; 0.5MHZ, 34mm P.O.A For Microdot add “D”
LLF1-34, 1MHZ, 34mm Twin Compression probes protective
LLF2-30, 2MHZ, 30mm membrane Subvis connector
Other sizes and frequencies available CDF1-25 P.O.A
Single Longitudinal probes medium CDF2-10
damped , Subvis connector CDF2-20
SLM1-25 Lemo P.O.A CDF2-25
SLM2-10 CDF4-10
SLM2-20 Lemo CDF4-20
SLM4.10 CDF5-10
SLM5-10 CDF5-25
SLM5-15 D5-5 Low profile with integral cable
SLM10-10 D5-10 Low profile with integral cable
Page 54
www.ndtes.co.uk saleshire@ndt-es.co.uk
Back to contents page
TRANSDUCERS - PHOENIX
High Temperature & Harsh Environment Shear Wave Gold Series Transducers – Stainless
Transducers Steel Case
Subvis Lemo 00
Part Number Part Number Lemo 00 Price (£)
Price Price (£)
HTC 2.5/10 GSW 2/38, 45, 60, 70
HTC 4/10 GSW 4/38, 45, 60, 70
HTC 5/10 GSW 4/70 Forward Emission 7mm
HTC 5/5 Lemo No. 1
GTW 2/38, 45, 60, 70
integral 2m lead Only
HTC 5/5
BNC Only GTW 2/38, 45, 60, 70
Integral 2m lead
HSSW 2/38,45,60,70 Shear Wave Transducers – Twin Crystal
HSSW 4/38,45,60,70 Part Number Connector Price (£)
HGSW 4/38,45,60,70 TSW 2/ 38, 45, 60, 70 Subvis
Manual High Temperature Range TSW 4/ 38, 45, 60, 70 Subvis
Part Number Connector Price (£) TBP 5/ 38, 45, 60, 70 Lemo No. 1
SSHSC 4/10 Lemo 00 TBP 5/ 38, 45, 60, 70 BNC
Automated Testing Single Crystal Shear Wave
SSHTC 1/20 Lemo 00
Transducers for use with Scanners
Lemo 00
SSHTC 2/20L Lemo 00 Part Number
Price (£)
SSHTC 2.5/10 Lemo 00 ASSW 2/ 38, 45, 60, 70
SSHTC 4/6 Subvis ASSW 2.5/ 38, 45, 60, 70
SSHTC 4/10 Lemo 00 ASSW 4/ 38, 45, 60, 70
Automated Testing Twin Crystal Shear Wave
SSHTC 4/20 Lemo 00
Transducers for use with Scanners
Lemo 00
SSHTC 5/10 Lemo 00 Part Number
Price (£)
SSHTC 5/20 Lemo 00 ATSW 2/ 38, 45, 60, 70
HHSSW
Lemo 00 ATSW 4/ 38, 45, 60, 70
2/10,38,45,60,70
HHSSW Automated Testing Shear Wave Gold Series
Lemo 00
4/10,38,45,60,70 Transducers
HHTC 4/10 Lemo 00 Lemo 00 POA
Shear Wave Transducers – Single Clear AGSW 2/ 38, 45, 60, 70
Subvis Lemo 00
Part Number AGSW 4/ 38, 45, 60, 70
Price Price (£)
Sub Miniature Single Crystal Shear Wave
SSW 2/38,45,60,70
Transducers
Side Entry Top Entry
SSW 2.5/ 38,45,60,70 Part Number
Subvis (£) Subvis (£)
SSW 4/ 38,45,60,70 SMS 2.25/ 38,40,45,60,70
RMSW
SMS 5/ 38,40,45,60,70
2.5/38,40,45,60,70
LSW 1/38,45,60,70 SMS 7.5/ 38,40,45,60,70
LSW 2/38,45,60,70
LSW 4/38,45,60,70
Page 55
www.ndtes.co.uk saleshire@ndt-es.co.uk
Back to contents page
TRANSDUCERS - PHOENIX
www.ndtes.co.uk Page 56
saleshire@ndt-es.co.uk
Back to contents page
TRANSDUCERS - PHOENIX
Page 57
www.ndtes.co.uk saleshire@ndt-es.co.uk
Back to contents page
TRANSDUCERS - PHOENIX
Single Crystal Compression Wave
T
Automated Testing Twin Crystal Compression Wave
Transducers Transducers for use with Scanners
Crystal Subvis Lemo 00 Crystal Lemo 00
Part No. Part Number Housing Size
Diameter Price (£) Price (£) Diameter Price (£)
SC 5/5 5 ATC 2.5/10-L 10 30x30X28
SC 2.5/10 10 ATC 4/10-L 10 30x30X28
SC 4/10 10 ATC 5/10-L 10 30x30X28
SC 5/10 10 ATC 5/10 SF-L 10 30x30X28
SC 1/20 20 ATC 1/20-L 20 40x40X34.5
SC 2/20 20 ATC 2/20-L 20 40x40X34.5
SC 4/20 20 ATC 4/20-L 20 40x40X34.5
Twin Crystal Compression Wave Transducers
SC 5/20 20
Corrosion Mapping
Single Crystal Compression Wave Part
Twin Crystal Connector Price (£)
Transducers Corrosion Mapping Number
Single Connec-
Part No. Price (£) SSTC 2/20 2MHz 20mm Lemo 00
Crystal tor
SSTC
SSSC 1/20 1 MHz 20mm Lemo 00 2.5 MHz 10mm Lemo 00
2.5/10
SSSC 2/20 2 MHz 20mm Lemo 00 SSTC 4/6 4 MHz 6mm Subvis
SSSC 2.5 MHz
Lemo 00 SSTC 4/10 4 MHz 10mm Lemo 00
2.5/10 10mm
SSSC 4/6 4 MHz 6mm Subvis SSTC 4/20 4 MHz 20mm Lemo 00
SSSC 4/10 4 MHz 10mm Lemo 00 SSTC 5/10 5 MHz 10mm Lemo 00
SSSC 4/20 4 MHz 20mm Lemo 00 SSTC 5/20 5 MHz 20mm Lemo 00
High Temperature Twin Crystal Compression Wave
SSSC 5/20 5 MHz 20mm Lemo 00
Transducers – Corrosion Mapping
Twin Crystal Compression Wave Connec-
Part Number Twin Crystal Price
Transducers tor
Crystal Subvis Lemo 00
Part No. SSHTC 1/20 1 MHz 20mm Lemo 00
Diameter Price (£) Price (£)
TC 2.5/10 10 SSHTC2.5/10 2.5 MHz 10mm Lemo 00
TC 4/10 10 SSHTC 4/6 4 MHz 6mm Subvis
TC 5/10 10 SSHTC 4/10 4 MHz 10mm Lemo 00
TC 5/10 SF 10 SSHTC 4/20 4 MHz 20mm Lemo 00
TC 1/20 20 SSHTC 5/10 5 MHz 10mm Lemo 00
TC 2/20 20 SSHTC 5/20 5 MHz 20mm Lemo 00
TC 4/20 20 Creeping Wave Transducers
Part Lemo 00
TC 5/20 20 Crystal Size Housing Size
Number Price (£)
CW
Pit Probe 2 (4x4) 2 (6x13) 25 x 25X25
2/13
Twin Crystal Compression Wave CW
2 (10x20) 30 x 30X28
Transducers 2/20
Crystal Connec- Price
CW
Part No. Dia. tor (£) 2 (8x25) 40 x 40
2/25
Type
TC 5/5 (integral 2m 5 Lemo CW
2 (6x13) 30 x 30X28
lead) No.1 4/13
TC 5/5 (integral 2m CW
5 BNC 2 (10x20) 30 x 30X28
lead) 4/20
CW
TC 5/5 (Side Entry) 5 Subvis 2 (8x25) 40 x 40
4/25
TC 10/6 (Side
6 Subvis
Entry)
Page 58
www.ndtes.co.uk saleshire@ndt-es.co.uk
Back to contents page
TRANSDUCERS - PHOENIX
WTOFSSI HT 20/45 M20 Part Number Twin Crystal Connector Price (£)
Page 59
www.ndtes.co.uk Back to contents page saleshire@ndt-es.co.uk
TRANSDUCERS BAUGH & WEEDON
Twin Compression 0°
Frequency Crystal Diameter Top Entry Side Entry
2.5MHz 10 mm Subvis Microdot Mini Lemo 00
5 MHz 10 mm Subvis Microdot Mini Lemo 00
Price £ 80.00 86.00 86.00
Single Angle
Frequency Crystal Diameter Angle in Steel Connector Types available
Page 60
www.ndtes.co.uk saleshire@ndt-es.co.uk
Back to contents page
ULTRASONIC – CABLES - ACCESSORIES
Cables Price (£)
Single No 1 Lemo to 00 Lemo x 2 metres cable 34.60
Twin No 1 Lemo to 00 Lemo x 2 metres cable 69.20
Single No 1 Lemo to No 1 Lemo x 2 metres cable 45.62
Twin No 1 Lemo to No 1 Lemo x 2 metres cable 91.24
Single BNC to 00 Lemo x 2 metres cable 25.85
Twin BNC to 00 Lemo x 2 metres cable 51.70
Single BNC to No 1 Lemo x 2 metres cable 31.80
Twin BNC to No 1 Lemo x 2 metres cable 63.60
Single No 1 Lemo to Subvis x 2 metres cable 30.00
Twin No 1 Lemo to Subvis x 2 metres cable 60.00
Single 00 Lemo to Subvis x 2 metres cable 27.80
Twin 00 Lemo to Subvis x 2 metres cable 55.60
Single 00 Lemo to 00 Lemo x 2 metre cable 27.80
Twin 00 Lemo to 00 Lemo x 2 metre cable 55.60
Single BNC to Subvis x 2 metres cable 23.65
Twin BNC to Subvis x 2 metres cable 47.30
Single BNC to Microdot x 2 metres cable 50.00
Twin BNC to Microdot x 2 metres cable 100.00
Single No 1 Lemo to Microdot x 2 metres cable 60.00
Twin No 1 Lemo to Microdot x 2 metres cable 120.00
Single 00 Lemo to Microdot x 2 metres cable 58.00
Twin 00 Lemo to Microdot x 2 metres cable 116.00
Above cables are RG174U 50Ω, thicker or other cables may be used
The above are our standard “Off the shelf” ranges of leads. Any type of lead with your choice of
connector and length can be supplied. Details are available on request.
ULTRASONIC COUPLANTS
www.ndtes.co.uk Page 61
saleshire@ndt-es.co.uk
Back to contents page
ULTRASONIC PLATE & RAIL TESTING TROLLEYS
PLATESCAN – Multi Probe Manual Plate Tester BR40/058698 Bi Directional rail trolley
www.ndtes.co.uk Page 62
saleshire@ndt-es.co.uk
Back to contents page
ULTRASONIC MULTIPLEXERS AND SEQUENCERS
General Facilities:
Prices:
Price Range - £1,900.00 - £3,450.00 MUX 1 4 channel - £2,975.00
Please specify test requirements MUX 2 8 channel - £4,950.00
www.ndtes.co.uk Page 63
saleshire@ndt-es.co.uk
Back to contents page
FLAWED SPECIMEN
NDE Educational Kits
Material UT Kit VT Kit MT Kit PT Kit RT Kit Demo Kit
Item Part No £ Part No £ Part No £ Part No £ Part No £ Part No £
KTCS8
Fe KTCS86 928 KTCS87 928 928 KTCS89 928 KTCS90 928 KTCS91 928
8
S/S KTSS86 1205 N/A N/A N/A N/A KTSS89 1205 KTSS90 1205 N/A N/A
Al KTAL86 1205 N/A N/A N/A N/A KTAL89 1205 KTAL90 1205 N/A N/A
Al FSAL01 1,623.00 N/A N/A N/A N/A FSAL04 1360.00 FSAL05 1623.00
Page 60 Visual
Item Part No £ Item Part No £ Item Part No £
SV Plate V-C-73 174.00 SV Pipe V-C-77 276.00 SV Nozzle V-C-81 525.00
SV Pipe V-C-74 179.00 SV Tee V-C-78 179.00 SV Node V-C-82 581.00
SV Pipe V-C-75 224.00 SV Y V-C-79 179.00 SV Node V-C-83 581.00
SV Pipe V-C-76 232.00 SV Nozzle V-C-80 525.00 Set 9 V-C-84 1,503.00
www.ndtes.co.uk Page 64
saleshire@ndt-es.co.uk
Back to contents page
EDDY CURRENT EQUIPMENT
Price £
ETHER NDE Eddy Current Equipment
SIGMACHECK :- Fully Featured Eddy Current Conductivity Meter, Complete Kit POA
WELDCHECK : - Single Frequency Flaw Detector Kit, with Flip function Left or Right hand POA
AEROCHECK : - Single Frequency Flaw Detector Kit with Rotary Drive POA
ETi - 2000 : - Advanced Multi Frequency & Multi Channel Flaw Detector POA
VEESCAN : - Wheel Inspection System, Up To 600mm or 900mm Diameter wheels POA
Complete range of probes cables and accessories available for the above equipment with
Various options. Data sheets and Specifications are available for the above on request
AEROCHECK
WELDCHECK
SIGMACHECK
www.ndtes.co.uk Page 65
saleshire@ndt-es.co.uk
Back to contents page
WELDING GAUGES
Gauges
Model Price (£)
“HI-LO” Weld Gauge (GAL) 169.00
Adjustable Fillet Weld Gauge (GAL) 117.00
“HI-LO” Single Purpose Weld-Deerman Gauge 49.00
V-WAC Gauge 49.00
WTPS Weld Gauge With Calibration Block 99.00
Fillet Weld Gauge Set 59.80
Cambridge Type Weld Gauge Welding Institute 69.00
AWS Weld Gauge 49.00
Pipe Pit Gauge (GAL) 112.50
Weld Profile Needle Gauge 5” Metal 12.00
Skew-T/Calculator Fillet Gauge 215.00
V-WAC Gauge
www.ndtes.co.uk Page 66
saleshire@ndt-es.co.uk
Back to contents page
COATING TEST EQUIPMENT
All models are supplied in an industrial foam-filled Carrying Case with flexible lead Measuring Probe
(Ferrous and Non-Ferrous instruments have two Measuring Probes), set of 8 Calibration Foils and Zero
Disk (Ferrous and Non-Ferrous instruments have two Zero Disks and C5003 Model has 3 Foils).
USB PC Download Cable is available as an optional extra enables the stored batches to be
downloaded to computer directly into Microsoft Word and Excel.
45.00
Full range of optional spares and accessories available, please ask
MiniTest 70 FN Ferrous & Non-Ferrous ,Full specification on request, 2 variants P.O A
MiniTest 650 Ferrous & Non-Ferrous ,Full specification on request, 2 variants 1164
Full range of probes and accessories available, details and prices on request
Wet Film Thickness Measurement
Cat Number Price (£)
W2001 Stainless Steel Comb – 25—1500 1—59 mils, 45 teeth 45.00
W1003 Stainless Steel Comb - 50—5000µm 2—100 mils, 45 teeth 50.00
W2008 Plastic Comb—50–900µm 2 –36 mils, 18 teeth 25.00
www.ndtes.co.uk Page 67
saleshire@ndt-es.co.uk
Back to contents page
PAINT INSPECTION
Gloss Meter
www.ndtes.co.uk Page 68
saleshire@ndt-es.co.uk
Back to contents page
COATING TEST EQUIPMENT – POROSITY / PIN HOLES
Accessories
Page 69
www.ndtes.co.uk Back to contents page saleshire@ndt-es.co.uk
SURFACE PROFILE
Surface Preparation
Cat Number Price (£)
R1001 Testex Tape Coarse, 20–64µm / 0.8–2.5mils (50 test per tape) 36.00
R1002 Testex Tape (Extra Coarse, 38–115µm / 1.5–4.5mils (50 test per tape) 36.00
R1004 Testex Gauge (metric) Includes roll of Coarse and X Coarse 297.50
R10054 Testex Gauge (imperial) Includes roll of Coarse and X Coarse 297.50
Testex Gauge
Page 70
www.ndtes.co.uk saleshire@ndt-es.co.uk
Back to contents page
SURFACE CLEANLINESS
NPC01 / NPC04 Bresle Calibration Solution & Patches Conformance Certificate 10.00
All spares and consumable available for the above products
www.ndtes.co.uk Page 71
saleshire@ndt-es.co.uk
Back to contents page
ADHESION
Adhesion Tester
Dolly’s
www.ndtes.co.uk Page 72
saleshire@ndt-es.co.uk
Back to contents page
METAL ANALYSIS
GOLDD technology stands for Geometrically Optimized Large Drift Detector, and it is the
cornerstone of the most significant improvement to XRF analysis since the introduction of the
Niton XL3t in 2007, yielding up to a 10x performance gain over this award-winning XL3t
analyser. What is the GOLDD advantage? GOLDD technology delivers vast improvements in
sensitivity and measurement times – as much as 10 times faster than conventional
Si-PIN detectors, and up to 3 times more precise than conventional SDD detectors (SDD).
Niton XL3t Series analysers with GOLDD technology provide you with many distinct
advantages:
www.ndtes.co.uk Page 73
saleshire@ndt-es.co.uk
Back to contents page
ACFM CRACK DEPTH MEASUREMENT
www.ndtes.co.uk Page 74
saleshire@ndt-es.co.uk
Back to contents page
CRACK DEPTH METER—RMG 4015
Crack depth gauge RMG 4015 measures crack depths on work pieces of iron, ferrous and
austenitic steels and can also be used for cracks in copper, brass, aluminium and other
non-ferrous metals. It operates due to the potential probe principle: A probe with four
spring-loaded and gilded contact pins is positioned across the crack to be measured on the
work piece. A constant alternating current is passed via two of the pins into the work piece;
the two other pins measure the voltage drop across the crack, where the crack depth is
derived from. The A/C. of the instrument utilizes the skin effect, which forces the current flow
to the surface of the conductor and therefore follows the contour of the crack. The operation
and measured value formation are monitored by the microprocessor of the gauge. In addition
to common cracks running in most cases perpendicularly to the surface, the real life often
shows oblique cracks, where usually it is not the expansion of the cracks which is of interest,
but the oblique orientation and the projection with reference to the surface. If you know these
measures it can be decided whether the post-treatment of a work piece with cracks is
technically possibly and economically reasonable.
Therefore the instrument was equipped with an additional measuring function for the
determination of oblique cracks, which permits to determine the inclination of the crack with
respect to the material surface.
Full technical specifications and data sheets are available on all of the above products
Page 75
Back to contents page
www.ndtes.co.uk Page 76
saleshire@ndt-es.co.uk
Back to contents page
MEAT & OTHER FOOD X-RAY TEST PIECES
POLYPROPYLENE TEST
PUCK
20mm diameter x 6mm thick for
test piece up to 3.5mm diameter
or 10mm thick for test piece
4.0mm - 6mm
diameter.
Prices on application
Page 77
Back to contents page
www.ndtes.co.uk Page 78
saleshire@ndt-es.co.uk
Back to contents page
www.ndtes.co.uk Page 79
saleshire@ndt-es.co.uk
Back to contents page
www.ndtes.co.uk Page 80
saleshire@ndt-es.co.uk
Back to contents page
www.ndtes.co.uk Page 81
saleshire@ndt-es.co.uk
Back to contents page
ULTRASONIC INSPECTION OF HEAT EXCHANGER TUBES
Our centering devices are intended to use as positioning assistance for gamma radiography in pipes of
diameter ranges as shown above. The spring pressure of the arms is adjustable.
The source terminal can simply be slide through the centering device and be locked by the centre
screw. The needed size is up to 15 mm in diameter, the length should extend about 60 mm more than
the centering device.
Page 83
www.ndtes.co.uk Back to contents page saleshire@ndt-es.co.uk
www.ndtes.co.uk Page 84
saleshire@ndt-es.co.uk
Back to contents page
www.ndtes.co.uk Page 85
saleshire@ndt-es.co.uk
Back to contents page
www.ndtes.co.uk Page 86
saleshire@ndt-es.co.uk
Back to contents page
Endoscopes & Visual Inspection Camera's
Page 87
Back to contents page
PIPE WALL / TANK WALL SCANNERS
www.ndtes.co.uk Page 88
saleshire@ndt-es.co.uk
Back to contents page
TANKFLOOR SCANNERS / MAPPING UNITS
The FloormapVS2i is latest version of the best selling The Handscan system is
MFL floor scanner and now comes with up-graded designed to compliment the full
magnets to improve defect detectability and sizing on sized scanners, MFL 2000 and
thicker materials, faster data capture with a custom Floormap 2000. Even in such a
designed micro controller and all new software. The VS2i small configuration the latest
contains significant improvements in terms of defect generation of permanent
positioning, electronic data processing and software magnets enable localised magnetic
manipulation saturation of the floor area under
test. Signals from corrosion, above
A new High Specification encoder system has been de- the operator controllable threshold,
veloped which is electronically calibrated to each individ- are displayed as both a visual and
ual scanner eliminating errors caused by component tol- audible alarm. It’s low profile and
erances. The new encoder now gives accuracy to within extendable handle allow scanning
3 mm on an 8 meter track length and providing it is cali- in otherwise inaccessible areas of
brated on an annual basis will not be effected by normal storage tanks such as the shell to
wear and tear. annular area and under pipe work
or heater coils.
The ruggedised on-board computer uses touch screen
technology for ease of use within the hostile storage tank • Latest generation permanent
environment. The custom designed data acquisition soft- magnet technology
ware not only captures all the MFL signals but analyses • Easy to use, cost effective
and displays the location and severity of the corrosion in inspection tool
real time. • Low profile with extendable
handle
• Automatic CAD drawing • Separate battery operated
• Patch plate design feature light weight electronic module
• Ruggedised touch screen computer
• Real time data acquisition and analysis
• Hard copy and electronic report functions
• Combined defect profiling and amplitude analysis
www.ndtes.co.uk Page 89
saleshire@ndt-es.co.uk
Back to contents page
EQUIPMENT AND SYSTEMS CALIBRATION
The calibration facilities fully compliment the equipment ranges offered for hire and for sale.
Radiation monitors,
Pressure/Temperature gauges,
Holiday Detectors.
www.ndtes.co.uk Page 90
saleshire@ndt-es.co.uk
Back to contents page
SERVICE / CALIBRATION CHARGES
If Your Equipment is Not Listed Please Contact Us For Latest Prices
Prices subject to pre inspection, replacement parts are not included in the above prices
www.ndtes.co.uk Page 91
saleshire@ndt-es.co.uk
Back to contents page
General Terms and Conditions of Hire No./
As of time and date of hire all plant becomes the responsibility of the hirer with regards to insurance, loss, theft, damage,
breakdown (ALL RISKS)
All equipment prior to leaving our base is thoroughly inspected to ensure its capability of performing to manufacturers
specifications. Any fault not reported within 24 hours will be defined to be the responsibility of the hirer.
No charge will be made for delivery of hand carried articles within a five mile radius of our nominated point of collection but
a nominal charge will be made for larger items. All mobilisation costs will be charged as extra.
Goods will remain on hire until the day of return to our base.
With the exception of wear and tear, all equipment will be thoroughly checked on return to the base and any defects,
repairs or damage will be rectified and charged. Advice will be by telephone or fax in the first instance, enabling your
personnel to verify equipment damage if necessary. We welcome inspection by clients’ engineer to view damage.
Ultrasonic probes, test blocks and leads are classified as consumable items and charged at cost.
Any goods returned in a damaged condition will remain on hire for a further period of 14 days after the return date to
enable us to carry out repairs. Any equipment damaged, non-functional, broken, lost, stolen or totally written off will
remain on hire until its insurance value or repair costs are paid in full, either by the client or his insurer. Note * see
insurance value below.
We reserve the right to change the technical specification of any or all of the products offered without prior notice in line
with the company’s policy of continuous improvement and increased efficiency.
It is our policy to keep sufficient stock to accommodate our client’s need, however, we only offer any article subject to
availability.
Invoices will be nett monthly and due for payment Strictly 30 Days from the date of invoice. Failure to adhere to our
payment terms will result in equipment being recovered from site and charged accordingly. A 6% interest rate per month
will be charged on invoices, which have exceeded the 30-day payment period.
All prices quoted are exclusive of VAT and MOB costs where applicable.
Please note failure to return this hire contract will result in the quoted hire charges being raised by 100%
Collection/Delivery:……………………………………………………………………………………………………
Equipment Details
Type:……………………………………………….. Make/Model:…………………………………………………
Sign:………………………………………………… Print::…………………………………………………………
Date:…………………………………………………
Fast Track Hire, photocopy / enlarge, then telephone us to obtain a contract number, complete this
page and fax it . Int+ 44 (0) 1933 274113, or scan & e-mail. Please note telephone calls may be recorded
www.ndtes.co.uk Page 92
saleshire@ndt-es.co.uk
Back to contents page
HIRE EQUIPMENT
Please ring our office to check availability
Other Equipment Is Also Available.
www.ndtes.co.uk Page 93
saleshire@ndt-es.co.uk
Back to contents page
REFURBISHED EQUIPMENT
FOR SALE
A large range of serviced and calibrated equipment is always available and is constantly changing.
Equipment in most disciplines is usually available.
General
Grade Sorters, Gas Detectors, Holiday Detectors, Tachometers
www.ndtes.co.uk Page 94
saleshire@ndt-es.co.uk
Back to contents page
ULTRASOUND VELOCITIES OF SOME
COMMON MATERIALS
www.ndtes.co.uk Page 95
saleshire@ndt-es.co.uk
Back to contents page
www.ndtes.co.uk Page 96
saleshire@ndt-es.co.uk
Back to contents page
TARIFF NUMBERS
Below are suggested Tariff numbers : you should check to ensure that those below are current.
We make no guarantees that these are correct but they have been used previously.
UV lamps 85394910
Weld gauges 85159000
X-Ray and Radiographic Accessories 90229090
X-Ray Equipment 90222900
Eddy Current units 90241000
Eddy Current probes and accessories 90249000
www.ndtes.co.uk Page 97
saleshire@ndt-es.co.uk
Back to contents page
OTHER SAFETY AND DETECTION DEVICES
Gas Detection
Portable gas detection for the
Air Movers & Ventilation
monitoring of single or multiple We offer a selection of air-moving
gases simultaneously. Models equipment suitable for all
can include up to 5 gases at environments; all with various
once, data logging and capabilities to ensure you have the
integrated pumps for remote right equipment with enough
sampling. capacity to suit your needs.
Lighting Tripods
Our range of ATEX approved Lightweight, easy to erect
safety torches, hand lamps and tripods with galvanised
cap lamps are suitable for use in tubular aluminium, and
all industries and are available telescopic legs, designed
as dry cell or re-chargeable for strong and stable
units. recovery.
www.ndtes.co.uk Page 98
saleshire@ndt-es.co.uk
Back to contents page
Notes
www.ndtes.co.uk Page 99
saleshire@ndt-es.co.uk
Back to contents page
Page 100