Escolar Documentos
Profissional Documentos
Cultura Documentos
There is room at one end for a small cast- 2 2-in.-long 1/4-20 bolts, nuts, washers for attaching front jaw of vise
iron woodworking vise, which is an essential 2 11/2-in.-long, 1/4-20 flathead screws for attaching rear jaw
tool in any woodworking shop. The vise is 1 Box of 11/4-in.-long drywall screws for laminating benchtop
fitted with non-marring wooden jaws, and the 4 ⁄ -in.-dia., 21/2-in.-long lag screws and washers, for attaching vise
38
jaws and benchtop receive dog holes, sized 16 S-clip-type tabletop fasteners
16 ⁄ -in.-dia. dowels, roughly 3 in. long
38
to fit a variety of handy bench accessories.
11/2 in.
24 in. 62 in.
4 in.
27⁄8 in. 35⁄16 in.
13⁄16 in.
10 in. 13⁄4 in.
Side Long stretchers
stretchers
335⁄8 in.
13⁄4 in.
17 in. 41 in.
48 in.
31/2 in.
VIDEOS Visit us online at FineWoodworking.com/Start to watch a two-part video detailing how to build this workbench from start to finish.
Top is made from two
layers of MDF, glued
and screwed together.
Cast-iron woodworking
vise, lag-bolted to 11/4 in. drywall
benchtop. screws driven
from the
bottom up
Shelf is cut from same
4x8 sheet of MDF.
All stretchers
are made from
2x4 lumber.
1 in.
S-clip tabletop
fasteners go into
top slots. Holes for
threaded
rod
⁄ -in.-dia.
38
Legs are made
dowels from 4x4 lumber.
⁄ -in. washers
38
⁄ -in.-dia.
38 and nuts
Dog holes,
threaded rod
3/4 in. dia.
2 in.
27⁄8 in.
38⁄ in. 3/4 in.
1 in. to
⁄ in.
38
11/2 in.
⁄ in.
9 16
⁄ in.
7 16
⁄ in.
38
27⁄8 in.
78⁄ in.
11/2 in. 11/2 in. 71/2 in.