Escolar Documentos
Profissional Documentos
Cultura Documentos
LAKASA Stainless Steel Sand Interceptor is designed to separate and retain sand, gritty material or
other type of heavy solids to prevent blockage in the drain lines. 1
The interception process is achieved through the concept and the principle of gravity and flotation
separation. The Baffle at the front chamber will effectively reduce the velocity and turbulence of the
incoming water and directing the waterflow downwards. This helps and facilitates the setflement of the
heavy sand and solid particles to the bottom level. The honeycomb design Mesh Screen located at the
exit opening to the second chamber will further intercept and prevent the floating sand to be escaped
into the Water Collection chamber (Pump chamber) before effluent water being channelled into the
outside drain lines.
The retained sand and other solid particles will be settled and accumulated at the bottom level in the
first chamber. Periodic cleaning and clearing routine is to-be carried out either by manual scoop or with
a sucking pump. During initial period of operation, monitor more regularly to esiabtish the freq'uencv of
maintenance required for the particular application. lt can be weekly, monthly or once in 3 monitr
depending on the sand content.
Sizing criteria : The system must be of adequate size and design to allow for cool-down of waster
water so that the separation can be more readily achieved. Designed to achieve a minimum Water
Retention Time (WRT) of 1 minute (with average WRT thru-out the day normally more than 30
minutes. This will be achieved when the pattern of water flow is in intermitteht manneiy for satisfactory
removal Percentage and avoid overflow during peak flow of incoming waste water.
Cross-section view
A (length)X B (width)
Inlet
Sole Agent : LAKASA Marketing & Distribution Tel : 03-6120 6895 Fax : 03-61201gS2
ZJ