Escolar Documentos
Profissional Documentos
Cultura Documentos
Static predimensioning
A B
Facade section: mullion as two-span beam
Loading case: rectangular load
L
load
influence
areas
LS
L
Construction
length L1 4.75 m
length L2 3.8 m
longest glass edge LS 2.2 m
span A 1.56 m
span B 1.56 m
Deflection limits
allowed deflection of mullion L/ or max. 26.4 mm
allowed deflection of glass edge L/ 175 or max. mm
Load
wind load p .66 kN/m²
Results
max. bending moment Mf 181.2 kNcm
req. section modulus W x (f) 20.6 cm³
support moment Ms -243.9 kNcm
req. section modulus W x (S) 27.7 cm³
req. moment of inertia Ix 178.2 cm4
deflection of construction 26.40 mm
deflection of glass edge 5.66 mm
______________________________________________________________________________
We carefully checked the specifications of the project as well as the program itself but
we do not assume liability for this calculation.
The calculation does not replace any valid structural calculation
______________________________________________________________________________