Escolar Documentos
Profissional Documentos
Cultura Documentos
Scope of each compressor package (single skid) shall include but not limited to the following:
In case due to transportation reasons, single skid is not feasible the skid shall be shipped in two numbers
suitable for bolting & dowelling at site.
- Electric Motor
- Inlet gas strainer with piping spool piece at inlet to each stage.
- Sole plates for skid mounted compressor package, Common base plate for compressor, driver &
associated auxiliaries i.e. lube oil system etc
- Closed circuit cooling system for cylinders and pressure packing (as required)
- Instrumentation and control system as specified on data sheets, P&ID’s, Instrumentation design
basis/specifications including local panel, console gauge boards etc.
- All the relays for repeat signals to local panel and main control room.
- Impulse and pneumatic piping / tubing, including all valves, fittings and mounting accessories to install
all vendor supplied instruments.
- Separate junction boxes for different type of signals like intrinsically safe signals, alarm, shutdown,
thermocouples, RTD’s etc. for interfacing to local panel and main control room. 3-way junction boxes for
connecting the local panel mounted analog indicator in series with the control room receiver.
- All cables between probes and local panel / MCR. - All electrical equipments and controls.
- All utility interconnections - All interconnecting piping, fittings, valves, wiring and tubing within
package/various consoles/ heat exchangers along with supports.
- All inspection and test, as specified, including field trial run test for 72 hours.
- Mandatory spares as specified. - Spares for commissioning / startup for compressor - Quotation for
recommended two years normal operation spares
- Foundation bolts
- Optional price for operation & maintenance service for a period of seven years from the date of
handover of package to owner.