Escolar Documentos
Profissional Documentos
Cultura Documentos
NOTE: Once a profile is created, you can use that many times, it will be saved permanently.
After 3C Daemon configuration, please open the node GUI and go to location shown in below
screenshot. Here make the recommended entries. Click Submit. Watch the messages on the screen.
If heavy traffic is there on Mux, the process will be slow.
If process fails repeat the entire process again. Also try creating new account in 3C Daemon.
The back up file is saved with name “config.tar.gz” inside the backupone directory on your PC.
For restoring the back up into the node, please ensure you place the “config.tar.gz” file in the user
directory you created for 3CDaemon profile, example backupone. There should not be any other file
in that folder.
Now please go to the following path on the GUI of the node and ensure selection of the option
highlighted in green circle. All other white boxes same entry is done as in case for back up.
If successful upload back to the equipment happens, then we get the following screen:
This is Last Step >> follow the instruction suggested in the below screenshot.
Typically the Mux should automatically go into “Warm Reboot” at this stage, if it does not, please go
ahead and manually give a “Warm Restart” to the mux through GUI.
If any technical difficulty arises please contact Tejas Networks Support Center.
*******