Você está na página 1de 2

PERHITUNGAN CADANGAN NIKEL MENGGUNAKAN

METODE POLIGON PADA AREA EKSPLORASI BLOK 1


PT. TAMBANG BUMI SULAWESI DI KECAMATAN
KABAENA SELATAN KABUPATEN BOMBANA
PROVINSI SULAWESI TENGGARA

Esa unggul
Program Studi Teknik Pertambangan Fakultas Ilmu dan Teknologi Kebumian
Universitas Halu Oleo
Email : esa.mining012@gmail.com

ABSTRAK

PT. Tambang Bumi Sulawesi memiliki luasa (IUP) ± 1.533 Ha yang terdiri
dari 3 blok yaitu blok batuawu, blok pununu, dan blok pongkalaero. Dari ke
tiga blok tersebut blok pongkalaero yang sedang melakukan aktivitas
penambangan, blok pongkalaero terbagi 3 blok, dari ke tiga blok tersebut blok
2 dan blok 3 sedang melakukan aktivitas. Untuk menindaklanjuti hasil
eksplorasi yang telah dilkukan PT. Tambang Bumi Sulawesi guna
menemukan cadangan yang ada di blok 1 maka digunakan salah satu metode
perhitungan cadangan yaitu metode poligon. Pemilihan metode poligon ini
cocok untuk kondisi geologi dan berdasarkan sebaran endapan nikel laterit
yang berada pada daerah tersebut tidak merata yaitu hanya berada pada spot
per spot. Melihat arah sebaran bijih nikel yang ada di blok 1 yang tidak relatif
merata maka penaksiran cadangan dilakukan dengan metode poligon yang
kemudian dilakukan perhitungan untuk mengetahui berapa besar tonase dan
kadar yang terjadi pada spasi titik bor 50 meter. Hasil perhitungan cadangan
di zona limonit dan saprolit menggunakan metode poligon adalah untuk zona
limonit diperoleh volume bijih nikel sebesar 8.360.000 m³ dengan tonase
keseluruhan adalah 11.704.00 ton sendangkan untuk zona saprolit diperoleh
volume total pada lapisan saprolit sebesar 18.187.500 m³ dengan tonase
keseluruhan adalah 25.462.500 ton, sehingga untuk total cadangan
keseluruhan sebesar 37.166.500 ton dengan kadar rata-rata Ni dan Fe adalah
1.67% dan 26.31%

Kata kunci : Perhitungan cadangan, Nikel Laterit, Poligon


NICKEL RESERVATION CULCULATIONS USING
POLYGON METHOD IN BLOCK EXPLORATION AREA 1
PT. TAMBANG BUMI SULAWESI IN DISTRICT
SOUTH KABAENA BOMBANA DISTRICT
SOUTH SULAWESI PROVINCE

Esa Unggul

Mining Engineering Study Plogram Faculty of Eard Sciences and


Technolgy
Halu Oleo University
Email: esa.mining012@gmail.com

ABSTRACT

PT. Tambang Bumi Sulawesi has an area (IUP) ±1.533 Ha consiting of 3


blocks, namely batuawu block, pununu block, and pongkalaero block. From
the there blocks, pongkalaero block which is carrying out mining activities,
the pongkalaero block is divided into 3 blocks, from the there blocks block 2
and block 3 are carrying out activities. To follow up on the results of
exploration that have been carried out by PT. Tambang Bumi Sulawesi to find
reserves in block 1, then one of the backup caculation method is suitable for
geological conditions and based on the distribution of laterite nickel deposits
in the area is uneven, which is only on the spot or spot. Looking at the
direction of the distribution of nickel ore in block 1 which is not relatively
evenly distributed, the reserve estimation is carried out by polygon method,
which is then calculated to find out how much tonnage and content occurs at
the spacing of 50 meter drill hole. The calculation results of reserves in the
limonite and saprolite zones using the polygon method for the limonite zone,
the volume of nickel ore is 8,360,000m³ with an overall tonnage of
11,704,000 tons for the saprolite zone with total volume of saprolite layer of
18,187,500 m³ with overall tonnage is 25,462,500 tons, so that the total
reserves of 37,166,500 tons with the averange levels of Ni and Fe are 1.67 %
and 26.31%

Keywords: Reserve calculation, Nickel laterite, Polygon.

Você também pode gostar