Escolar Documentos
Profissional Documentos
Cultura Documentos
Classification
AWS A5.18 AWS A5.18M
ER70S-2 ER48S-2
Characteristics and typical fields of application
Böhler N ER 70 S-2 NACE is a copper coated GTAW rod containing Al, Ti and Zr as strong
deoxidents in addition to Mn and Si and is often referred to as triple deoxidized copper coated wire
with very low impurity levels.
This has advantages when rimming or semi-killed mild steels are welded or where
joint preparations are rusty or contaminated.
Böhler N ER 70 S-2 NACE is primarily used for single pass welding. It is also recommedned for
multipass welding for low temperature toughness requirements down to –30 °C.
Corrosion Test: Passes corrosion test (HIC & SSCC) as per NACE standards.
Base Materials
S235J2G3, E360, P235T1, P235G1TH, L210, P255G1TH, P235GH, P265GH, P295GH, P310GH,
P255NH, S235JRS1 – S235J4S, S255N, P255NH, GE200-GE260
ASTM A27 a. A36 Gr. All; A 210 Gr.1; A 214; A 34 Gr.1; A 36, A 113; A 139
Typical analysis of the TIG rods (wt.-%)
C Si Mn Ti Zr Al
Wt.-% 0.05 0.5 1.2 + + +
Mechanical Properties of all-weld metal
All information provided is based upon careful investigation and intensive research. 09/01/2018
However, we do not assume any liability for correctness and information is subject to change without notice. www.voestalpine.com/welding