Escolar Documentos
Profissional Documentos
Cultura Documentos
!
N
O
TI
LU
O
ES
R
W
LO
The AMIANTIT Group Products
The Saudi Arabian AMIANTIT Company (SAAC) was GRP Pipeline Systems
established in Saudi Arabia in 1968 and since then it
has systematically expanded its activities, both FLOWTITE GRP pipes are produced using a continuous
geographically and in product terms. The AMIANTIT winding process. This process represents the state-of-
Group’s pipe systems have thus become the first the-art in GRP pipe manufacture. During manufacturing,
choice in the construction of pipe networks, with almost among others, continuous glass fibres are worked in by
30 manufacturing facilities as well as various being wound on a metal cylinder in a circumferential
technology centres around the world ensuring that direction. AMIANTIT Germany’s production is certified
AMIANTIT’s products are and remain among the market to ISO 9001 and the finished products meet the
leaders. In addition, an extensive network of sales requirements of EN 1796 and EN 14364.
offices takes care of the needs of an international Further certifications are available on request.
clientele. FLOWTITE GRP pipes are characterized above all by
their light weight, corrosion resistance and simple
assembly. The pipes can be joined using a choice of
systems:
!
• Plug coupling tensile by injection
N
• Tensile flange coupling
• Tensile laminated coupling
O
TI
LU
Since 1994, AMIANTIT Germany GmbH has been
producing FLOWTITE glass fibre reinforced plastic pipes
(GRP pipes) using the continuous winding process. They
O
support.
Product Range:
Do not hesitate to contact us. Your individual contact
LO
!
N
FLOWTITE GRP pipes and fittings from DN 100 to
DN 4000, PN 6 to PN 32, SN 2500 to SN 10000.
O
TI
LU
O
ES
R
FLOWTITE GRP pipes and fittings from DN 100 to Cooling and Processing Lines in Industrial
DN 3000, PN 1 to PN 10 and SN 2500 / SN 10000. and Power Station Applications
Certified and approved to EN 14346.
Pipes and fittings in GRP from DN 100 to DN 4000,
PN 1 to PN 32, for above and belowground pipeline
systems.
Main areas of application:
• Cooling Systems
• Fire Protection Systems
• Sea Water Inlet Systems
• Desulphurisation Systems.
!
N
O
Pipe Relining – Trenchless Renovation Systems
Special Applications:
• Well Pipes
• Bridge Pipes
• Shafts (valve shafts, pumping stations...)
• Fluid Storage tanks, Ballast Pipes
• etc.
Reservoirs and Retention Systems
AMIREN pipes are produced in a discontinuous AMIJACK jacking pipes are GRP pipes manufactu-
process. Resin-impregnated, continuous and cut glass red in a centrifugal casting process. The high
fibres are wound together with an inert filling of quartz compaction results in a composite with an extremely
sand on a individually formed rotating steel core. smooth inside and outside pipe surface. The pipe
AMIREN pipeline systems promise a cost-effective and system is delivered in outer diameters between 427 mm
long-lasting solution. The outstanding product and 2,453 mm with a standard ring stiffness SN (N/m2)
characteristics not only offer cost-effective solutions, between SN32000 and SN1000000 and in standard
but also many advantages during installation and in lengths of 1, 2, 3 and 6 m.
operation:
Some specific advantages and benefits of AMIJACK
• Corrosion resistance for jacking use are:
• High resistance to many chemicals
• Light weight • Low specific weight of GRP material is reducing the
• Unique hydraulic characteristics handling efforts
• Outstanding abrasion resistance • Usually low installation costs of jacking compared to
• High leak-tightness open trench technology
• Low maintenance and service costs • High axial compressive strength (min. 90 N/mm2)
!
• High maximum allowable jacking forces with small
N
AMIREN pipe systems transport different liquids with wall thickness
pH values between 1 and 10. The special profile forms • Low required wall thickness for reduced jacking
O
are used in both new installations, as well as for relining forces at maximum jacking lengths
older sewer systems. • Materials low water adhesion results in small friction
The pipes are available in different cross-sections, e.g. The pipes are primarily installed by jacking and
egg-shaped, elliptical, parabolic, or as mouth-shaped predominantly used in:
profiles. AMIREN pipe systems are available in many
standard sizes, or can be custom made to customer’s • Construction of new sewer pipelines
R
!
N
O
TI
LU
O
Distributed by:
ES
Am Fuchsloch 19
04720 Mochau
Germany
W
Tel.: + 49 3431 71 82 10
Fax: + 49 3431 70 23 24
LO
info-de@amiantit.eu
www.amiantit.eu