This document provides information on welding procedures and requirements for a welding process. It specifies details like the joint design, base metal specifications, filler metal used, preheat and interpass temperature ranges, welding positions, and electrical characteristics. The techniques, such as string or weave bead, gas cup size, and travel speed range are also outlined. The document is signed by two individuals to approve the welding process.
This document provides information on welding procedures and requirements for a welding process. It specifies details like the joint design, base metal specifications, filler metal used, preheat and interpass temperature ranges, welding positions, and electrical characteristics. The techniques, such as string or weave bead, gas cup size, and travel speed range are also outlined. The document is signed by two individuals to approve the welding process.
This document provides information on welding procedures and requirements for a welding process. It specifies details like the joint design, base metal specifications, filler metal used, preheat and interpass temperature ranges, welding positions, and electrical characteristics. The techniques, such as string or weave bead, gas cup size, and travel speed range are also outlined. The document is signed by two individuals to approve the welding process.
JOINT DESIGN : QW-402 POST WELD HEAT TREATMENT : QW-407
JOINT NO:
BACKING: YES NO TEMPRATURE RANGE ( C ) :
BACKING MAT: N/A HEATING RATE ABOVE 400 °C : METHOD OF FIT UP:BRIDGE OR BRACKET TIME RANGE ( HOURE ) : EDGE PREPARATION:GRINDING&MACHIN COOLING RATE : OTHER: N/A
BASE METAL : QW-403 GAS : QW-408
P-No. : GROUP No. : To P-No. : GROUP No. : SHIELD GAS :
SPEC TYPE & GRADE TO FLOW RATE (Lit/min ) : THICKNESS RANGE : BASE METAL ( mm ) : GAS BACKING ( Lit/min ) : DEPOSITED WELD METAL : PIPE DIA. RANGE (INCH) : PERCENT COMP. :
FILLER METAL : QW-404 ELECTRICAL CHARACTERISTICS : QW-409
ROOT OTHER CURRENT AC / DC AND POLARITY :
SPECIFICATION - SFA No. :
CLASSIFICATION AWS No. : HEAT INPUT MAX. : F - No. : A - No. : TUNGSTEN ELECTRODE SIZE : SIZE OF FILLER METALS ( mm ) : BRAND : TYPE : DRYING CONDATION TEMP: TIME:
POSITION : QW-405 TECHNIQUE : QW-410
STRING OR WEAVE BEAD :
POSITION ( S ) OF GROOVE : FILLET: BEAD ( STRING or WEAVING ) : WELDIGN PROGRESSION : UP HILL GAS CUP SIZE ( mm ) : INITIAL AND INTERPASS CLEANING :
PREHEAT : QW-406
PREHEAT TEMP. Min. ( C ) : MULTIPLE or SINGLE PASS ( PER SIDE ) :
INTERPASS TEMP. MAX. : MULTIPLE or SINGLE ELECTRODE ( PER SIDE ) : PREHEAT MAINTANCE : BACK GOUGING :
FILLER METAL CURRENT
WELD WELDING TRAVEL SPEED RANGE VOLT RANGE REMARK LAYERS PROCESS (Cm/min ) AWS Class DIA. ( mm ) TYPE Polar AMP Range