Escolar Documentos
Profissional Documentos
Cultura Documentos
l Employs state
state--of
of--the
the--art ultra wideband technology providing excellent RF performance in all bands
Electrical Specifications
Frequency Band, MHz 1695–1880 1850–1990 1920–2180 2300–2500 2500–2690
Gain, dBi 17.2 17.4 17.9 18.1 18.0
Beamwidth, Horizontal, degrees 63 65 65 61 58
Beamwidth, Vertical, degrees 7.3 6.8 6.4 5.7 5.5
Beam Tilt, degrees 0– 10 0– 10 0– 10 0– 10 0– 10
USLS (First Lobe), dB 16 16 20 21 20
Front
Front--to
to--Back Ratio at 180°, dB 27 29 31 35 35
Isolation, dB 28 28 28 28 28
Isolation, Intersystem, dB 28 28 28 28 28
VSWR | Return Loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150
Input Power per Port at 50°C,
300 300 300 250 250
maximum, watts
Polarization ±45° ±45° ±45° ±45° ±45°
Impedance 50 ohm 50 ohm 50 ohm 50 ohm 50 ohm
* CommScope
CommScope® ® supports NGMN recommendations on Base Station Antenna Standards (BASTA). To learn more about the benefits of BASTA, download the
whitepaper Time to Raise the Bar on BSAs.
General Specifications
Operating Frequency Band 1695 – 2690 MHz
page 1 of 3
November 20, 2018
©2018 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: May 14, 2018
V3-65A-R3
Mechanical Specifications
RF Connector Quantity, total 6
RF Connector Quantity, high band 6
RF Connector Interface 4.3-10 Female
Color Light gray
Grounding Type RF connector inner conductor and body grounded to reflector and mounting
bracket
Radiator Material Low loss circuit board
Radome Material Fiberglass, UV resistant
RF Connector Location Bottom
Wind Loading, frontal 855.0 N @ 150 km/h
192.2 lbf @ 150 km/h
Wind Loading, lateral 141.0 N @ 150 km/h
31.7 lbf @ 150 km/h
Wind Speed, maximum 241 km/h | 150 mph
Dimensions
Length 1322.0 mm | 52.0 in
Width 504.0 mm | 19.8 in
Depth 118.0 mm | 4.6 in
Net Weight, without mounting kit 20.0 kg | 44.1 lb
Packed Dimensions
Length 1450.0 mm | 57.1 in
Width 613.0 mm | 24.1 in
page 2 of 3
November 20, 2018
©2018 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: May 14, 2018
V3-65A-R3
Regulatory Compliance/Certifications
Agency Classification
RoHS 2011/65/EU Compliant by Exemption
China RoHS SJ/T 11364-2006 Above Maximum Concentration Value (MCV)
ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system
Included Products
BSAMNT--1 — Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top
BSAMNT
bracket set and one bottom bracket set.
* Footnotes
Performance Note Severe environmental conditions may degrade optimum performance
page 3 of 3
November 20, 2018
©2018 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: May 14, 2018