Escolar Documentos
Profissional Documentos
Cultura Documentos
Operating Instructions
Blu-ray DiscTM Home Theater Sound System
Model No. SC-BTT190
Unless otherwise indicated, illustrations in these operating instructions are of SC-BTT190 for Australia and New Zealand.
GN GS GA VQT4D57
until
2012/02/06
SC-BTT190GNGSGA-VQT4D57_mst.book 2 ページ 2012年1月12日 木曜日 午前9時59分
Safety precautions
Speaker
WARNING ≥ Use only supplied speakers
The main unit and supplied speakers are to be used only as
Unit indicated in these operating instructions. Failure to do so may
lead to damage to the amplifier and/or the speakers, and may
To reduce the risk of fire, electric shock or product damage,
≥ Do not expose this unit to rain, moisture, dripping or splashing. result in the risk of fire. Consult a qualified service person if
≥ Do not place objects filled with liquids, such as vases, on this damage has occurred or if you experience a sudden change in
unit. performance.
≥ Use only the recommended accessories. ≥ Be careful not to cross (short-circuit) or reverse the polarity of
≥ Do not remove covers. the speaker wires as doing so may damage the speakers.
≥ Do not repair this unit by yourself. Refer servicing to qualified ≥ Do not hold the speaker in one hand to avoid injury by dropping
service personnel. the speaker when carrying.
≥ Do not let metal objects fall inside this unit. ≥ You can damage your speakers and shorten their useful life if
≥ Do not place heavy items on this unit. you play sound at high levels over extended periods.
≥ Do not touch the front netted area of the speakers. Hold by the sides.
AC mains lead ≥ Place speakers on flat, secure surfaces.
To reduce the risk of fire, electric shock or product damage, ≥ To avoid injury by falling or dropping the speaker, place the
≥ Ensure that the power supply voltage corresponds to the speaker cables with care not to stumble or hook.
voltage printed on this unit.
≥ Insert the mains plug fully into the socket outlet.
Batteries
≥ Do not pull, bend, or place heavy items on the lead. Mishandling of batteries can cause electrolyte leakage and may
≥ Do not handle the plug with wet hands. cause a fire.
≥ Danger of explosion if battery is incorrectly replaced. Replace
≥ Hold onto the mains plug body when disconnecting the plug.
only with the type recommended by the manufacturer.
≥ Do not use a damaged mains plug or socket outlet.
≥ When disposing the batteries, please contact your local
Install this unit so that the AC mains lead can be unplugged from authorities or dealer and ask for the correct method of disposal.
the socket outlet immediately if any problem occurs. ≥ Do not mix old and new batteries or different types at the same
Small object time.
≥ Keep the Memory Card out of reach of children to prevent ≥ Do not heat or expose to flame.
swallowing. ≥ Do not leave the battery(ies) in a car exposed to direct sunlight
for a long period of time with doors and windows closed.
≥ Do not take apart or short circuit.
≥ Do not recharge alkaline or manganese batteries.
CAUTION ≥ Do not use batteries if the covering has been peeled off.
Remove batteries if you do not intend to use the remote control for
Unit a long period of time. Store in a cool, dark place.
≥ This unit utilizes a laser. Use of controls or adjustments or
performance of procedures other than those specified herein
may result in hazardous radiation exposure.
≥ Do not place sources of naked flames, such as lighted candles,
(For Soudi Arabia and Kuwait)
on this unit. How to replace the fuse
≥ This unit may receive radio interference caused by mobile The location of the fuse differ according to the type of AC mains
telephones during use. If such interference occurs, please plug (figures A and B). Confirm the AC mains plug fitted and follow
increase separation between this unit and the mobile the instructions below.
telephone. Illustrations may differ from actual AC mains plug.
≥ [For[Australia[and[New[Zealand] 1 Open the fuse cover with a screwdriver.
This unit is intended for use in moderate climates.
≥ [Except[Australia[and[New[Zealand] Figure A Figure B
This unit is intended for use in tropical climates.
Fuse cover
Placement
Place this unit on an even surface.
To reduce the risk of fire, electric shock or product damage,
≥ Do not install or place this unit in a bookcase, built-in cabinet or
in another confined space. Ensure this unit is well ventilated.
≥ Do not obstruct this unit’s ventilation openings with 2 Replace the fuse and close or attach the fuse cover.
newspapers, tablecloths, curtains, and similar items.
≥ Do not expose this unit to direct sunlight, high temperatures, Figure A Fuse Figure B Fuse
high humidity, and excessive vibration. (5 ampere) (5 ampere)
2 VQT4D57
SC-BTT190GNGSGA-VQT4D57_mst.book 3 ページ 2012年1月12日 木曜日 午前9時59分
Table of contents
Safety precautions......................................... 2
Getting started
Getting started TV & Radio
Playback
STEP 2: Preparing the speakers ................... 11 Advanced operations
STEP 3: Connections..................................... 11
STEP 4: Connecting the AC mains lead ........ 14
Enjoying Network Service...............................26
STEP 5: Settings............................................ 15
Home Network feature....................................27
•Easy Setting ......................................................... 15
•Easy Network Setting ........................................... 15 Option menu ...................................................28
•Firmware updates ................................................ 16 Setup menu ....................................................31
TV & Radio
Inserting or removing media .......................... 17 •Speaker settings .................................................. 37
Enjoying sound effects from all speakers .......38
Enjoying TV with unit’s speakers ................... 17
Speaker installation option..............................38
HOME menu .................................................. 18
Multi User Mode............................................. 19
Reference
Playback
Troubleshooting guide ....................................40
Messages .......................................................44
operations
Advanced
Playback ........................................................ 20
Specifications..................................................46
Using the iPod/iPhone ................................... 22
•iPod/iPhone Connection ....................................... 22
Supplemental information ...............................48
•iPod/iPhone Playback .......................................... 22
Reference
≥ Please note that the actual controls and components, menu items, etc. may look somewhat different from those shown in the
illustrations in these Operating Instructions.
VQT4D57
3
SC-BTT190GNGSGA-VQT4D57_mst.book 4 ページ 2012年1月12日 木曜日 午前9時59分
Check the package contents and supplied accessories before using this unit.
Package contents
Main unit
(Speaker cables)
4 VQT4D57
SC-BTT190GNGSGA-VQT4D57_mst.book 5 ページ 2012年1月12日 木曜日 午前9時59分
Accessories
Getting started
∏ 1 Remote control ∏ AC mains lead* ∏ 1 FM indoor antenna ∏ 1 Sheet of speaker
(N2QAYB000729) 1 for Australia and New cable sticker
Zealand
2 for the Middle East
and South East Asia
∏ 2 Batteries for
remote control
≥ Product numbers provided in these operating instructions correct as of January 2012. These may be subject to change.
≥ Do not use AC mains lead with other equipment.
VQT4D57
5
SC-BTT190GNGSGA-VQT4D57_mst.book 6 ページ 2012年1月12日 木曜日 午前9時59分
Playable media
Device Disc markings Device types Contents format
BD-Video Video
DVD-Video Video
DVD-R
Video, AVCHD, DivX®,
MKV, JPEG, MPO,
DVD FLAC, MP3, WAV
DVD-R DL
DVD-RW
Video, AVCHD
— +R/+RW/+R DL
≥ See pages 7 and 47 for more information on the types of content that can be played.
6 VQT4D57
SC-BTT190GNGSGA-VQT4D57_mst.book 7 ページ 2012年1月12日 木曜日 午前9時59分
Getting started
≥ Photo CD and DTS-HD Master Audio) adopted in BD-Video.
≥ DVD-Audio ∫ 3D
≥ Video CD and Super Video CD ≥ 3D videos and 3D still pictures can be played back
≥ WMA discs
when this unit is connected to a 3D compatible TV
≥ DivX Plus HD discs using a High Speed HDMI Cable.
≥ HD DVD ≥ 2D video can be enjoyed as 3D virtually. (> 31)
∫ Region management information ∫ Music CD
BD-Video Operation and sound quality of CDs that do not
[For]South]East]Asia] conform to CD-DA specifications (copy control
This unit can play BD-Video discs supporting the region code “A”. CDs, etc.) cannot be guaranteed.
Example:
∫ SD card
≥ miniSD Cards, microSD Cards, microSDHC
Cards and microSDXC Cards can be used,
but must be used with an adaptor card.
These are usually supplied with such cards,
[For[Australia[and[New[Zealand] [For]the]Middle]East]
or otherwise customer provided.
This unit can play BD-Video discs supporting the region code “B”.
Example: ≥ To protect the card’s contents, move
the record prevention tab (on the SD
card) to “LOCK”.
≥ This unit is compatible with SD Memory Cards that meet SD
Card Specifications FAT12 and FAT16 formats, as well as
SDHC Memory Cards in FAT32 format (Does not support
DVD-Video long file names.) and SDXC Memory Cards in exFAT.
[For]the]Middle]East] ≥ If the SD card is used with incompatible
This unit can play DVD-Video discs supporting computers or devices, recorded contents may
the region number “2” or “ALL”. be erased due to the card being formatted etc.
Example: ≥ Useable memory may be slightly less than the
card capacity.
2
2 ALL 3
4 ∫ USB device
[For]South]East]Asia] ≥ This unit does not guarantee connection with all
This unit can play DVD-Video discs supporting USB devices.
the region number “3” or “ALL”. ≥ This unit does not support USB device charging.
Example: ≥ FAT12, FAT16, FAT32 and NTFS file systems
are supported.
2 ≥ This unit supports USB2.0 High Speed.
3 ALL 3
4 ≥ This unit can support an HDD formatted to FAT32 and NTFS.
Some types of HDD may require the use of its external power
[For[Australia[and[New[Zealand]
supply unit.
This unit can play DVD-Video discs supporting
the region number “4” or “ALL”. ∫ BD-RE, BD-R
Example: Discs recorded in DR mode using Panasonic Blu-ray Disc
recorders may not play back the audio etc., correctly.
2
4 ALL 3
4
≥ It may not be possible to play the above media in some cases
∫ Finalize due to the type of media, the condition of the recording, the
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recording method and how the files were created.
≥ The producers of the disc can control how discs are played, so
recorded by a recorder, etc. needs to be finalized you may not always be able to control play as described in these
by the recorder to play on this unit. Please refer to operating instructions. Read the disc’s instructions carefully.
the recorder’s instructions.
VQT4D57
7
SC-BTT190GNGSGA-VQT4D57_mst.book 8 ページ 2012年1月12日 木曜日 午前9時59分
ノヶ
チヮユワ
7
ヱチヮ
ヶ
ユワヶ
8 VQT4D57
SC-BTT190GNGSGA-VQT4D57_mst.book 9 ページ 2012年1月12日 木曜日 午前9時59分
Getting started
1 2 3
OPEN/CLOSE VOL
iPod
SD CARD
4 5 6 7 8
1 Standby/on switch (Í/I) (> 15) 5 SD card slot (> 17)
Press to switch the unit from on to standby 6 USB port (> 17, 22)
mode or vice versa. In standby mode, the unit 7 Remote control signal sensor
is still consuming a small amount of power. Distance: within approx. 7 m.
2 Open or close the disc tray (> 17) Angle: Approx. 20e up and down, 30e left and
3 Adjust the volume of the main unit right
4 Disc tray 8 Display
1 2 3 4 5 6 7 8 9 10
VOLT ADJ
110 127V 220 240V
VQT4D57
9
SC-BTT190GNGSGA-VQT4D57_mst.book 10 ページ 2012年1月12日 木曜日 午前9時59分
STEP 1: Positioning
For optimum position
Place the front, centre and surround speakers at approximately the same distance from the seating position.
≥ Adjust the volume using the Delay time function if the distance between each speaker and the
seating position is not equal. (> 37)
60°
120°
≥ Keep your speakers at least 10 mm away from the system for proper ventilation.
≥ Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick
curtains.
≥ For optional wall mount, refer to page 38.
10 VQT4D57
SC-BTT190GNGSGA-VQT4D57_mst.book 11 ページ 2012年1月12日 木曜日 午前9時59分
Getting started
Connecting the speaker cables
Attach the speaker cable sticker (supplied) and connect the speaker cables to the speakers.
e.g., Surround speaker
r: White
SURROUND
Lch
s: Blue line
Connector
Speaker cable sticker (supplied)
Push
Speaker indication
STEP 3: Connections
Turn off all equipment before connection and read the appropriate operating instructions.
Do not connect the AC mains lead until all other connections are complete.
Speaker connection
Connect the speaker cables to the terminals of the same colour.
VQT4D57
11
SC-BTT190GNGSGA-VQT4D57_mst.book 12 ページ 2012年1月12日 木曜日 午前9時59分
Connection to a TV
∫ HDMI
≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use
HDMI cables 5.0 meters or less.
Recommended part number (High Speed HDMI Cable):
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m), RP-CDHS50 (5.0 m), etc.
≥ Audio will be output through the system’s speakers when “Off” is selected in “HDMI Audio Output”. (> 33)
∫ TV Audio
≥ To output TV audio from this unit's speakers, you need to switch the selector. (> 17)
∫ OPTICAL IN
≥ After making the digital audio connection, make settings to suit the type of audio from your digital
equipment. (> 33)
Audio cable*2
(not supplied)
*1
If the HDMI terminal on the TV is labelled “HDMI (ARC)”, the connection of the optical digital audio cable is not required.
*2
It is also possible to use an audio cable instead of the optical digital audio cable. In this case, connect the AUX terminal on
the main unit with the audio output terminal on the TV.
What is ARC?
ARC is an abbreviation of Audio Return Channel, also known as HDMI ARC. This feature allows a home
theatre system to receive and play audio from the TV through a signal HDMI cable without additional wiring.
FM antenna connection
≥ Use an FM outdoor antenna if radio reception is poor.
12 VQT4D57
SC-BTT190GNGSGA-VQT4D57_mst.book 13 ページ 2012年1月12日 木曜日 午前9時59分
Getting started
e.g., OPTICAL
OUT
For details about connection method, refer to the instructions supplied with the connected equipment.
≥ A wireless LAN connection can be used only in those countries where the wireless function is authorized
for use. Use of a wireless LAN connection is prohibited in the regions where DY-WL5 is not sold.
≥ For up-to-date compatibility information on your wireless router, refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
≥ The unit is not compatible with public wireless LAN services provided in airports, stations, cafes, etc.
≥ Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.
≥ Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.
VQT4D57
13
SC-BTT190GNGSGA-VQT4D57_mst.book 14 ページ 2012年1月12日 木曜日 午前9時59分
VOLT ADJ
110 127V 220 240V
AC mains lead
(supplied) [Except[Australia[and[New[Zealand]
Before connecting the AC mains lead;
To a household mains socket Set the voltage.
≥ Use a flat-head screwdriver to move the voltage selector to
the appropriate position for the area in which this system is
used.
[For]the]Middle]East] [For]South]East]Asia]
Use the AC mains lead that matches the socket AC mains lead with a label is for Thailand.
for the area you live in. AC mains lead without a label is for areas other
than Thailand.
≥ This unit consumes a small amount of AC power (> 46) even when turned off. In the interest of
power conservation, if you will not be using this unit for an extended period of time, it can be
disconnected.
14 VQT4D57
SC-BTT190GNGSGA-VQT4D57_mst.book 15 ページ 2012年1月12日 木曜日 午前9時59分
Getting started
Easy Setting settings.
After connecting your new home theatre for the Wireless Settings
first time and pressing [Í], a screen for the basic Select a connection method to wireless access point.
settings will appear. Please refer to the operating instructions of your wireless
access point about connection methods.
VQT4D57
15
SC-BTT190GNGSGA-VQT4D57_mst.book 16 ページ 2012年1月12日 木曜日 午前9時59分
OK
RETURN
≥ If downloading on this unit fails or this unit is not
connected to the Internet, then you can download the
latest firmware from the following website and burn it
to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (> 36,
“Firmware Version Information”)
≥ Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
≥ If you do not want to check for the latest firmware version,
set “Automatic Update Check” to “Off”. (> 36)
16 VQT4D57
SC-BTT190GNGSGA-VQT4D57_mst.book 17 ページ 2012年1月12日 木曜日 午前9時59分
Getting started
OPEN/CLOSE VOL 1 Connect the TV and the main unit. (> 12)
2 Press [EXT-IN] several times to select the
appropriate external input mode. (> 18)
SD CARD
iPod ≥ Reduce the volume on the TV to its
minimum, and then adjust the volume of the
* main unit.
VQT4D57
17
SC-BTT190GNGSGA-VQT4D57_mst.book 18 ページ 2012年1月12日 木曜日 午前9時59分
HOME menu
Major functions of this unit can be operated from Videos/Photos/Music
the HOME menu.
Disc Play back the contents.
Preparation (> 20)
Turn on the television and select the appropriate SD Card ≥ When multiple contents are
video input on the television. recorded, select the types
USB
1 Press [Í] to turn on the unit. of contents or the title.
HOME
To enjoy Music (> 22)
EXT IN FM Radio
Home Cinema Network
Others
Setup (> 31)
Photos Videos Music
SD Card
(> 21)
Sound Others
Management
iPod
FM Radio
18 VQT4D57
SC-BTT190GNGSGA-VQT4D57_mst.book 19 ページ 2012年1月12日 木曜日 午前9時59分
Getting started
Smartphone
switching of multiple settings easily. ≥ Multiple users cannot be
Up to 4 people can use the unit with their own registered for one smartphone.
settings.
4 Select “Confirm” and press [OK].
The following settings can be personalized. To change the personalized user information
≥ The user icon Select “Edit User Information” from Setup menu.
≥ The wallpaper of HOME menu (> 36)
≥ The audio and picture settings (> 28, 31)
Switching the user
HOME
A User 1
EXT IN Network FM Radio
∫ Using coloured buttons
Home Cinema
Playback
Playback
Skip
While playing or paused, press [:] or
1 Insert the media. [9].
Playback starts depending on the media. Skip to the title, chapter or track.
2 Select the item to play and press [OK].
Repeat this procedure if necessary. Frame-by-frame
While paused, press [2] (2;) or [1] (;1).
≥ Press and hold to change in succession forward
≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE
DISPLAYED. Press [∫STOP] when you have finished or backward.
playback to protect the unit’s motor, your television screen ≥ Press [1PLAY] to revert to normal playback
and so on. speed.
≥ DivX and MKV: Successive play is not possible.
≥ It is not possible to play back AVCHD and MPEG2 video ≥ BD-Video and AVCHD: [1] (;1) only.
which have been dragged and dropped, copied and pasted
to the media.
Changing audio
Slow-motion C D
While paused, press [SEARCH6] or A T: Title, C: Chapter, PL: Playlist
[SEARCH5]. B Elapsed time in the title
≥ BD-Video and AVCHD: [SEARCH5] only. C Current position
The speed increases up to 5 steps. D Total time
≥ Press [1PLAY] to revert to normal playback
speed.
20 VQT4D57
SC-BTT190GNGSGA-VQT4D57_mst.book 21 ページ 2012年1月12日 木曜日 午前9時59分
e.g., JPEG
Slideshow
1 / 26
Date 11.12.2007
Size 500 x 375 Play a slideshow of photos and make various
Manufacturer settings during the playback.
Equipment
Playback
terminal of this unit using a High Speed HDMI Start the slideshow.
Cable. (> 12) Start You can display still pictures in
≥ Perform the necessary preparations for the TV. Slideshow the selected folder one by one
≥ Play back following the instructions displayed at a constant interval.
on the screen. Interval Change the display interval.
≥ 3D Settings (> 31, 33)
Transition Select the effect when sliding
Effect pictures.
≥ Please refrain from viewing 3D images if you do not feel Set whether to repeat the
well or are experiencing visual fatigue. Repeat Play
slideshow.
In the event that you experience dizziness, nausea, or
other discomfort while viewing 3D images, discontinue use Set whether to play
and rest your eyes. background music.
≥ 3D video might not output the way it is set in “HDMI Video
Format” or “24p Output” (> 32). ≥ You can select the
≥ When playing back 3D photos from “Photos” screen, select soundtrack from USB
from the “3D” list. (Still pictures in “2D” are played back in Soundtrack device, Music CD and iPod/
2D.) If “2D” and “3D” indications are not displayed, press
the red button to switch the view of playback contents. iPhone.
≥ Some media cannot be
selected as the source
Enjoying BD-Live depending on the case.
With “BD-Live” discs, you can enjoy bonus Soundtrack Select the folder from which
contents that use Internet access. Folder the music files are played.
For this BD-Live function, insertion of an SD card Random Background music is played in
is necessary along with Internet connection. Soundtrack random order.
1 Perform network connection and settings.
(> 13, 15)
≥ Still pictures displayed as “ ” cannot be played back
2 Insert an SD card with 1 GB or more free with this unit.
space. ≥ When a music CD, a USB device with recorded music, and
an iPod/iPhone are inserted/connected to this unit, iPod/
≥ The SD card is used as the local storage. iPhone has priority to be played back as background
3 Insert the disc. music.
≥ The usable functions and the operating method may vary
with each disc, please refer to the instructions on the disc
and/or visit their website.
≥ “BD-Live Internet Access” may need to be changed for
certain discs (> 35).
VQT4D57
21
SC-BTT190GNGSGA-VQT4D57_mst.book 22 ページ 2012年1月12日 木曜日 午前9時59分
iPod classic
iPod/iPhone Connection
Preparation
≥ Turn the main unit off or reduce the volume of
the main unit to its minimum.
1 Connect the iPod/iPhone.
To purchase a Dock Connector to USB Cable,
consult your iPod/iPhone dealer.
iPod/iPhone (not supplied)
22 VQT4D57
SC-BTT190GNGSGA-VQT4D57_mst.book 23 ページ 2012年1月12日 木曜日 午前9時59分
VIERA Link
TV & Radio
Playback
the operating instructions for connected
equipment for operational details.
Easy control only with VIERA
Preparation remote control
1 Set “VIERA Link” to “On” (> 36).
(The default setting is “On”.) Only when TV supports “HDAVI Control 2” or
later
TV & Radio
2 Set the “HDAVI Control” operations on the
connected equipment (e.g., TV). By using the TV remote control, you can perform
3 Turn on all “HDAVI Control” compatible various playback operations and settings.
equipment and select this unit’s input channel See the operating instructions of the TV for more
on the connected TV so that the “HDAVI details.
Control” function works properly.
Also when the connection or settings are
≥ The buttons that you can use for this unit vary depending
changed, repeat this procedure. on the TV. For details, refer to the operating instructions of
the TV.
≥ The operation of this unit may be interrupted when you
press certain buttons on the TV remote control.
Automatic input switching ≥ This unit supports “HDAVI Control 5” function.
Power on link “HDAVI Control 5” is the newest standard (current as of
November, 2011) for Panasonic’s HDAVI Control
compatible equipment. This standard is compatible with
When the following operations are performed, the Panasonic’s conventional HDAVI equipment.
≥ VIERA Link “HDAVI Control”, based on the control
input channel of the television will be functions provided by HDMI which is an industry standard
automatically switched and the screen of this unit known as HDMI CEC (Consumer Electronics Control), is a
will be displayed. unique function that we have developed and added. As
such, its operation with other manufacturers’ equipment
When the television is off, the television will that supports HDMI CEC cannot be guaranteed.
automatically turn on. ≥ Please refer to individual manuals for other manufacturers’
– When play starts on the unit equipment supporting VIERA Link function.
– When an action that uses the display screen is
performed
(e.g., HOME menu)
≥ This function does not work when the iPod/
iPhone selector is chosen. (> 22)
VQT4D57
23
SC-BTT190GNGSGA-VQT4D57_mst.book 24 ページ 2012年1月12日 木曜日 午前9時59分
supplied)
Optical digital audio cable
(not supplied) Optical digital audio
cable (not supplied)
≥ For details, refer to the operating instructions of the TV.
24 VQT4D57
SC-BTT190GNGSGA-VQT4D57_mst.book 25 ページ 2012年1月12日 木曜日 午前9時59分
TV & Radio
* To change the frequency, refer to “Manual
tuning and presetting”.
3 Press and hold [OK].
Release the button when “AUTO” is
displayed.
The tuner starts to preset all the stations it
can receive into the channels in ascending
operations
Advanced
order.
Reference
To select a 1-digit number
e.g., 1: [1] B [OK].
To select a 2-digit number
e.g., 12: [1] B [2].
Alternatively, press [W, X] or [3, 4].
VQT4D57
25
SC-BTT190GNGSGA-VQT4D57_mst.book 26 ページ 2012年1月12日 木曜日 午前9時59分
Press [INTERNET].
≥ The video communication service can be
You can access information services from the
VIERA Connect Home screen via the Internet. accessed directly by pressing [ ] button.
Communication Camera
TY-CC20W or TY-CC10W
26 VQT4D57
SC-BTT190GNGSGA-VQT4D57_mst.book 27 ページ 2012年1月12日 木曜日 午前9時59分
Server *
Renderer i
Home theatre Controller
* DMC compatible software should be installed.
Server Preparation
Preparation Perform steps 1 and 2. (> left)
1 Perform network connection (> 13) and 3 Add the contents and folder to the libraries of the
network settings (> 15) of this unit. Windows Media® Player or the smartphone, etc.
2 Perform Home Network settings of the ≥ Playlist of Windows Media® Player can play back
connected equipment. only the contents that are stored in the libraries.
When connected to other than DIGA, 4 Perform the “Remote Device Settings”. (> 35)
operations
Advanced
3 Add the contents and folder to the libraries of the ≥ You can register up to 16 devices.
Windows Media® Player or the smartphone, etc.
1 Press [HOME].
≥ Playlist of Windows Media® Player can play
back only the contents that are stored in the 2 Select “Network”.
libraries. 3 Select “Home Network”.
When connected to DIGA,
3 Register this unit to your DIGA. 4 Select “Media Renderer”.
1 Press [HOME]. 5 Operate the DMC compatible devices.
2 Select “Network”. To exit from Media Renderer screen
3 Select “Home Network”. Press [HOME].
6 Select the item to play and press [OK]. ≥ Depending on the contents and the connected equipment,
playback may not be possible.
≥ You may be able to use convenient ≥ Items displayed in grey on the display cannot be played
functions depending on the content by back by this unit.
pressing [OPTION]. ≥ This unit can be played back via connected equipment only
when controlled using DMC.
≥ Control Panel (> 29) is displayed once the
playback starts. Press [OK] if the Control
Panel is not displayed, and press
[RETURN] to hide the Control Panel.
To exit from Home Network
Press [EXIT], [HOME] or [POP-UP MENU/TOP MENU].
VQT4D57
27
SC-BTT190GNGSGA-VQT4D57_mst.book 28 ページ 2012年1月12日 木曜日 午前9時59分
Repeat Play
1
Off
∫ Rotate LEFT
Status
Secondary Video
Rotate the still picture.
Playback Information Window
Control Panel
∫ Icon Registration
2 Select an item and change the settings.
Set the still picture as your user icon. (> 19)
To exit the screen
Press [OPTION]. ∫ Video
The recording method of original video appears.
Regarding Language: (> 48)
∫ Secondary Video
Operation Menu Select on/off of images. The
recording method of original
∫ Soundtrack video appears.
Show or change the soundtrack. Video
≥ During search/slow-motion or
frame-by-frame, only the
∫ Audio channel primary video is displayed.
Select the audio channel number.
Select on/off of audio and the
Soundtrack
∫ Subtitle language.
Change the subtitle settings.
∫ Angle
Select the number of the angle.
28 VQT4D57
SC-BTT190GNGSGA-VQT4D57_mst.book 29 ページ 2012年1月12日 木曜日 午前9時59分
∫ Chroma Process
Press [RETURN] to hide the Control Panel.
The high-resolution processing of HDMI chroma
signals produces a high-resolution picture with
∫ Top Menu
rich picture quality.
Display Top Menu.
operations
Advanced
Display Pop-up Menu. The picture is sharp and detailed.
∫ 24p
Movies and other material recorded on
DVD-Video at 24p are output at 24p.
≥ Only when you have selected “On” in “24p
Output” (> 32) and play discs recorded at a
rate of 60 fields per second.
≥ This may not work with the PAL contents.
∫ Screen Aspect
Switch the screen mode.
VQT4D57
29
SC-BTT190GNGSGA-VQT4D57_mst.book 30 ページ 2012年1月12日 木曜日 午前9時59分
30 VQT4D57
SC-BTT190GNGSGA-VQT4D57_mst.book 31 ページ 2012年1月12日 木曜日 午前9時59分
Normal Picture
Picture Mode Normal
3D effects. Sound
Picture Adjustment
Super Resolution
operations
Advanced
Network Still Mode Automatic
Manual
settings of “Manual Settings”. OK
RETURN
VQT4D57
31
SC-BTT190GNGSGA-VQT4D57_mst.book 32 ページ 2012年1月12日 木曜日 午前9時59分
32 VQT4D57
SC-BTT190GNGSGA-VQT4D57_mst.book 33 ページ 2012年1月12日 木曜日 午前9時59分
operations
screen when playing back the 3D compatible
Advanced
video software.
∫ Downmix
Select the downmix system of multi-channel to ∫ Manual Settings (> 31)
2-channel sound.
≥ Select “Surround encoded” to enjoy the
surround sound. ∫ Graphic Display Level (> 31)
≥ There is no downmix effect on the bitstream
audio signal.
≥ The audio will be output in “Stereo” in the
following cases:
– AVCHD playback
– Dolby TrueHD playback
– Playback of secondary audio (including the
button click sound).
VQT4D57
33
SC-BTT190GNGSGA-VQT4D57_mst.book 34 ページ 2012年1月12日 木曜日 午前9時59分
¾ Wireless Settings
Language This allows the wireless router and connection
settings to be set. Current connection settings
∫ Soundtrack Preference
and connection state can be checked.
Choose the language for audio.
≥ If “Original” is selected, the original language of Connection Setting
each disc will be selected. The wireless router connection wizard will be
≥ Enter a code (> 48) when you select “Other displayed.
¢¢¢¢”.
Double Speed Mode Setting (2.4GHz)
∫ Subtitle Preference When a 2.4 GHz wireless format is used, this
Choose the language for the subtitle. sets the connection speed.
≥ If “Automatic” is selected and the language ≥ If you connect using the “Double Speed
selected for “Soundtrack Preference” is not Mode (40MHz)”, 2 channels use the same
available, subtitles of that language will frequency band, and there is consequently
automatically appear if available on that disc. a greater risk of reception interference. This
≥ Enter a code (> 48) when you select “Other can cause the connection speed to drop or
¢¢¢¢”. become unstable.
Summer Time
Select “On” when using Daylight Saving time.
34 VQT4D57
SC-BTT190GNGSGA-VQT4D57_mst.book 35 ページ 2012年1月12日 木曜日 午前9時59分
[Except[South[East[Asia]
¾ Network Drive Connection Ratings
It is possible to access the shared folder of The following items use the same password.
equipment not compatible with DLNA, such as Don’t forget your password.
the Windows XP operating system, and play
back video, still pictures, and music on this unit. ∫ DVD-Video Ratings
For the setting and operation method of Set a ratings level to limit DVD-Video play.
connected equipment, refer to the following
Website. ∫ BD-Video Ratings
http://panasonic.jp/support/global/cs/ Set an age limit of BD-Video play.
(This site is in English only.)
∫ Network Service Lock
¾ Remote Device Settings (> 27) You can restrict the usage of VIERA Connect.
Press [OK] to show the following settings:
operations
Advanced
Automatic the equipment that is
The sides are cut
accessing this unit.
off so the picture
Set the permission of fills the screen.
the connection 4:3
When playing
Manual individually for the BD-Video, video is output as “4:3
equipment that is Letterbox”.
accessing this unit.
Black bands
Remote Device List 4:3 appear at the top
Registering/deregistering of the displayed Letterbox and bottom of the
equipment can be performed when “Manual” picture.
in “Registration Type” is selected.
When connected to a 16:9 widescreen
¾ BD-Live Internet Access (> 21) television and playing 4:3 ratio image:
You can restrict Internet access when BD-Live Video is displayed as a 4:3 ratio
functions are used. 16:9
image in the centre of the screen.
≥ If “Limit” is selected, Internet access is
permitted only for BD-Live contents which ¾ TV System
have content owner certificates. Perform the setup so it matches the TV System
of the connected TV.
VQT4D57
35
SC-BTT190GNGSGA-VQT4D57_mst.book 36 ページ 2012年1月12日 木曜日 午前9時59分
36 VQT4D57
SC-BTT190GNGSGA-VQT4D57_mst.book 37 ページ 2012年1月12日 木曜日 午前9時59分
∫ Delay time
Speaker settings
For optimum listening with 5.1-channel sound, all
the speakers, except for the subwoofer, should be
the same distance from the seating position.
If either distance 1 or 2 is less than 3, measure
L
ms
0.0 C
dB
0 R the distance and adjust the time to make up for
Complete dB
0
the difference (see the table below).
Test SW
dB ms dB C : A
0 0.0 0
L C R
LS RS
1 3 : B
SW
2
A Volume (Channel balance) LS RS
Press [3, 4] to adjust the volume of each 2 Press [3, 4] to select the setting and
speaker ( dB0 ). press [OK].
The volume can be adjusted between r6 dB
to s6 dB. Delay time for the Centre speaker
≥ Set each speaker level according to the Subtract the distance 1 from 3
operations
Advanced
volume of the Front (L) and Front (R)
speaker volume respectively. Distance (Approx.) Setting
3 Press [OK]. 34 cm 1.0 ms
The test signal stops. 68 cm 2.0 ms
102 cm 3.0 ms
136 cm 4.0 ms
170 cm 5.0 ms
Delay time for the Surround speakers
Subtract the distance 2 from 3
Distance (Approx.) Setting
170 cm 5.0 ms
340 cm 10.0 ms
510 cm 15.0 ms
VQT4D57
37
SC-BTT190GNGSGA-VQT4D57_mst.book 38 ページ 2012年1月12日 木曜日 午前9時59分
Sound Effects
≥ In this position, the ≥ Move the speaker so
1 Press [SOUND]. speaker will likely fall if that the screw is in this
2 Press [3, 4] to select “2CH SOURCE” or moved to the left or right. position.
“ALL SOURCE”, and then press [OK].
e.g., Use the measurements indicated below to identify
the screwing positions on the wall.
≥ Leave at least 20 mm of space above the
speaker and 10 mm on each side to allow
enough space for fitting the speaker.
3 While the selected mode is displayed
Press [3, 4] to select the desired setting and
press [OK].
Repeat this procedure if necessary. (> 30)
≥ The sound effects/modes may not be available or have no
effect with some sources.
≥ You may experience a reduction in sound quality when
these sound effects/modes are used with some sources. If
this occurs, turn the sound effects/modes off.
38 VQT4D57
SC-BTT190GNGSGA-VQT4D57_mst.book 39 ページ 2012年1月12日 木曜日 午前9時59分
Centre speaker
Preventing the speakers from
dropping
Front speaker, Surround speaker, Centre speaker
1 Thread a string to the speaker.
≥ Use a string of less than ‰ 2.0 mm, which is
capable of supporting over 10 kg.
e.g., Front speaker
A 18 mm
B 25 mm
C 230.5 mm
Front speaker, Surround speaker
A String (not supplied)
B Rear of the speaker
2 Thread a string from the wall to the
speaker and tie tightly.
When placed on the floor
D 40 mm
E 24 mm
operations
Advanced
When mounted on a wall
C Screw eye (not supplied)
D Wall
E Approx.150 mm
F Less than 100 mm
VQT4D57
39
SC-BTT190GNGSGA-VQT4D57_mst.book 40 ページ 2012年1月12日 木曜日 午前9時59分
TV is switched.
Before requesting service, please perform the ¾ This is a normal phenomenon when using
following checks. VIERA Link (HDAVI Control 4 or later). For
If the problem remains unresolved, consult details please read the operating instructions
your dealer for instructions.
for the TV.
Do you have the latest firmware installed?
Firmware updates may be released to correct The remote control doesn’t work properly.
operating irregularities that are discovered with ¾ Change the batteries in the remote control.
certain movies. (> 16) (> 8)
¾ The remote control and main unit are using
different codes. If “SET ” is displayed on the
The following do not indicate a problem with
unit’s display when a button is pressed on the
this unit: remote control, change the code on the
– Regular disc rotating sounds.
remote control. (> 36, 44)
– Image disturbance during search.
– Image disturbance when replacing 3D discs. The TV tuner mode is not displayed when the
∫ Unit doesn’t respond to remote TV is switched on.
control or front panel buttons. ¾ This phenomenon may occur, depending on the
Press and hold [Í/I] on the main unit for 3 seconds. TV setting, when “Quick Start” is set to “On”.
– If still unable to turn the unit off, disconnect the ¾ Depending on the TV, this phenomenon may
AC mains lead, wait 1 minute, then reconnect be prevented by reconnecting the HDMI cable
the AC mains lead. to a different HDMI input terminal or by
∫ Cannot eject disc. changing the HDMI auto connection setting.
The unit may have a problem.
1 While the unit is off, press and hold [OK], the You have forgotten your ratings password.
yellow button and the blue button on the remote You want to cancel the ratings level.
control at the same time for more than 5 seconds. ¾ The ratings level returns to the factory preset.
j“00 RET” is displayed on the unit’s display. 1 While the unit is on, press and hold [OK], the
2 Repeatedly press [1] (right) on the remote yellow button and the blue button on the remote
control or [Í/I] on the unit until “06 FTO” is control at the same time for more than 5 seconds.
displayed on the unit’s display. j“00 RET” is displayed on the unit’s display.
3 Press [OK] on the remote control or 2 Repeatedly press [1] (right) on the remote
[< OPEN/CLOSE] on the unit. control or [Í/I] on the unit until “03 VL” is
displayed on the unit’s display.
3 Press [OK] on the remote control or
General operation [< OPEN/CLOSE] on the unit.
To return to the factory preset. This unit does not recognize the USB
¾ Select “Yes” in “Default Settings” in the Setup connection correctly.
menu. (> 36) ¾ Disconnect and reconnect the USB cable. If it
still does not recognize the connection, turn
To return all settings to the factory preset. this unit off and on again.
¾ Reset the unit as follows: ¾ USB devices may not be recognized by this
1 While the unit is off, press and hold [OK], the unit when connected using the following :
yellow button and the blue button on the remote ja USB hub
control at the same time for more than 5 seconds. ja USB extension cable other than the
j“00 RET” is displayed on the unit’s display. supplied with the Wireless LAN Adaptor
2 Repeatedly press [1] (right) on the remote DY-WL5 (optional)
control or [Í/I] on the unit until “08 FIN” is ¾ If you connect USB HDD to this unit, use the
displayed on the unit’s display. USB cable that is supplied with the HDD.
3 Press and hold [OK] on the remote control or
[< OPEN/CLOSE] on the unit for at least
3 seconds.
40 VQT4D57
SC-BTT190GNGSGA-VQT4D57_mst.book 41 ページ 2012年1月12日 木曜日 午前9時59分
The unit switches to standby mode. The system switches from PAL to NTSC or
¾ This unit will automatically turn to standby vice versa.
mode after 30 minutes if it is inactive. (> 18) ¾ The system used on the disc doesn’t match
¾ When the time set for the sleep timer has your television.
passed, the main unit will be turned off. (> 8) jPAL discs cannot be correctly viewed on an
¾ One of the unit’s safety devices is activated. NTSC television.
Press [Í/I] on the main unit to turn the unit on. ¾ When “3D BD-Video Playback” in the Setup
menu is set to “Automatic”, images may not
The unit does not turn off. be output depending on the connection
1 Press and hold [Í/I] on the main unit for 5 method. After removing the disc from this unit,
seconds. (If still unable to turn the unit off, select “Set before play” in the Setup menu,
disconnect the AC mains lead, wait 1 minute, and select “2D Playback” in the setup screen
then reconnect the AC mains lead.) displayed when playing 3D discs. (> 33)
2 Reset the unit as follows: ¾ If irregular colouring occurs on your TV, turn
While the unit is off, press and hold [+ VOLUME], the TV off for about 30 minutes.
[< OPEN/CLOSE] and [Í/I] on the main unit at If it persists, move the speakers further away
the same time for more than 5 seconds. from the TV.
Reference
3D video is not output correctly as 2D.
[< OPEN/CLOSE] on the unit for at least ¾ Select “Set before play” in the Setup menu,
3 seconds. and select “2D Playback” in the setup screen
Set the item again. (> 32) displayed when playing 3D discs. (> 33, “3D
jWhen Dolby Digital Plus, Dolby TrueHD, BD-Video Playback”)
and DTS-HD audio are not output in ¾ Discs that have recorded titles with Side by
bitstream, select “Yes” in “Default Settings” side (2 screen structure) and that can be
and make proper settings. (> 36) enjoyed in 3D are played back in accordance
¾ The unit and television are using different with the settings of the TV.
video systems.
1 While the unit is on, press and hold [OK], the A black band is displayed around the edge of
yellow button and the blue button on the the screen.
remote control at the same time for more than The aspect ratio of the screen is abnormal.
5 seconds. ¾ Confirm the “TV Aspect” is set properly. (> 35)
–“00 RET” is displayed on the unit’s display. ¾ Adjust the aspect setting on the television.
2 Repeatedly press [1] (right) on the remote
control or [Í/I] on the unit until “05 P/N” is
displayed on the unit’s display.
3 Press and hold [OK] on the remote control or
[< OPEN/CLOSE] on the unit for at least
3 seconds.
VQT4D57
41
SC-BTT190GNGSGA-VQT4D57_mst.book 42 ページ 2012年1月12日 木曜日 午前9時59分
42 VQT4D57
SC-BTT190GNGSGA-VQT4D57_mst.book 43 ページ 2012年1月12日 木曜日 午前9時59分
Reference
VQT4D57
43
SC-BTT190GNGSGA-VQT4D57_mst.book 44 ページ 2012年1月12日 木曜日 午前9時59分
44 VQT4D57
SC-BTT190GNGSGA-VQT4D57_mst.book 45 ページ 2012年1月12日 木曜日 午前9時59分
H or F
(“ ” stands for a number.)
¾ Check and correct the speaker cable
connections.
¾ There is something unusual.
¾ Check the unit using the troubleshooting
guide. If the service number remains
displayed, do the following.
1 Disconnect the plug from the household
mains socket, wait a few seconds, then
reconnect it.
2 Press [Í/I] to turn the unit on.
If the service number remains displayed despite
doing the above, request service from the dealer.
Inform the dealer of the service number when
requesting service.
START
¾ The system is being restarted during the
firmware update. Please do not turn off the unit.
UPD/
(“ ” stands for a number.)
¾ The firmware is being updated. Please do not
turn off the unit.
FINISH
¾ The firmware update is complete.
Reference
NOT CONDITIONAL
¾ The requested operation cannot be
conducted.
SET OK
¾ The stations are set, and the radio tunes to
the last preset station.
ERROR
¾ Automatic presetting is unsuccessful. Preset
the stations manually.
TUNED/STEREO
¾ Stereo broadcasting or stereo sound is
selected.
TUNED
¾ Monaural broadcasting or monaural sound is
selected.
VQT4D57
45
SC-BTT190GNGSGA-VQT4D57_mst.book 46 ページ 2012年1月12日 木曜日 午前9時59分
Frequency range: 87.50 MHz to 108.00 MHz (50 kHz Specifications are subject to change without notice.
step)
Antenna terminals: 75 ≠ (unbalanced)
46 VQT4D57
SC-BTT190GNGSGA-VQT4D57_mst.book 47 ページ 2012年1月12日 木曜日 午前9時59分
Reference
VQT4D57
47
SC-BTT190GNGSGA-VQT4D57_mst.book 48 ページ 2012年1月12日 木曜日 午前9時59分
48 VQT4D57
SC-BTT190GNGSGA-VQT4D57_mst.book 49 ページ 2012年1月12日 木曜日 午前9時59分
“AVCHD”, “AVCHD 3D”, “AVCHD Progressive” and “AVCHD 3D/Progressive” are trademarks of Panasonic Corporation and Sony
Corporation.
Java is a registered trademark of Oracle and/or its affiliates.
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929;
7,212,872 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS-HD and the Symbol together are
registered trademarks & DTS-HD Master Audio | Essential is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All
Rights Reserved.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.
This product is licensed under the AVC patent portfolio license and VC-1 patent portfolio license for the personal and non-commercial
use of a consumer to (i) encode video in compliance with the AVC Standard and VC-1 Standard (“AVC/VC-1 Video”) and/or (ii)
decode AVC/VC-1 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained
from a video provider licensed to provide AVC/VC-1 Video. No license is granted or shall be implied for any other use. Additional
information may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
Reference
“Wi-Fi”, “Wi-Fi Protected Setup”, “WPA” and “WPA2” are marks or registered marks of the Wi-Fi Alliance.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.
VQT4D57
49
SC-BTT190GNGSGA-VQT4D57_mst.book 50 ページ 2012年1月12日 木曜日 午前9時59分
DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification marks of the Digital Living Network
Alliance.
Windows is a trademark or a registered trademark of Microsoft Corporation in the United States and other countries.
Skype, associated trade marks and logos and the “ ” logo are trade marks of Skype Limited.
“Made for iPod” , and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or
iPhone, respectively, and has been certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod, or iPhone may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
(1) MS/WMA
This product is protected by certain intellectual property rights of Microsoft Corporation and third parties. Use or distribution of such
technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary.
(2) Vorbis, FLAC, WPA Supplicant
The software licenses are displayed when “Software Licence” in the Setup menu is selected. (> 36)
Copyright 2004-2010 Verance Corporation. Cinavia™ is a Verance Corporation trademark. Protected by U.S. Patent 7,369,677 and
worldwide patents issued and pending under license from Verance Corporation. All rights reserved.
50 VQT4D57
SC-BTT190GNGSGA-VQT4D57_mst.book 51 ページ 2012年1月12日 木曜日 午前9時59分
Reference
VQT4D57
51
SC-BTT190GNGSGA-VQT4D57_mst.book 53 ページ 2012年1月12日 木曜日 午前9時59分
VQT4D57
Panasonic Corporation 2012 F0112SY0