SHIP'S COPY
Anchor Handling Procedures wio Shark Jaw
Material Required
36 mm dia x 60 meters work wire one end goldnose socket
2 lengths 36 mm x 6 meters wire rope sling both end soft eye for pelican hook
1 set SWL 15 tons and 25 tons pelican hook
4 nos shackles 35 tons and 2 nos shackles 25 tons
1 set 19 mm dia x 6 meters buoy catcher
2 pes boat hook
OaRON=
Anchor Handling
Ensure 3 way radio communication between barge, bridge and deck |
Prepare anchor handling equipment and tools
‘Asking barge master which anchor will deploy example no 1
Pick up pennant wire from the barge one end has already connected to anchor no 1
and the other end to connect to work wire using a shackle 25 tons
Pennant wire already connected to work wire inform the barge
Heave up work wire and pennant wire until anchor reach on the stern roller
Inform to the barge anchor on the stern roller and put work winch brake on
Vessel move slowly towards anchor no 1 drop position |
After arriving on location drop point ask barge master whether anchor can deploy |
‘Once anchor deployed inform the barge anchor on the bottom
The rest pennant wire on deck secure on pelican hook disconnect pennant wire from |
work wire and the end pennant wire connect to the buo}
Drop the buoy into the water by opening pelican hook pin |
Saco von BONS
33
8
Recovery of Anchor __ Cross Buoy Type
Asking the barge master which anchor will recover example anchor no 1
Maneuver the vessel to the anchor buoy no 1 stern facing wind/down current
Deck crews catch the buoy by using a buoy catcher
Buoy catcher connect to work wire using a shackle 25 tons
Heaving buoy up on deck anchor pennant wire secure ,1 the pelican hook
Buoy disconnect from pennant wire and the end of pennant wire connect to work wire
using a shackle 25 tons inform the barge
Heaving anchor up on the stern roller
Anchor ~ff bottom and anchor on the stem roller inform the barge
The barge heave up work anchor and vessel maneuver towards anchor no 1 posit
0 Vessel reach at barge payout pennant wire and secure on pelican hook disconnect
pennant wire from work wire and send to the barge
BOeW oaken