Escolar Documentos
Profissional Documentos
Cultura Documentos
Categories: Metal; Nonferrous Metal; Aluminum Alloy; 5000 Series Aluminum Alloy
Material This alloy has good workability, very good corrosion resistance, high fatigue strength,
Notes: weldability, and moderate strength. This leads to its use in aircraft fuel/oil lines, fuel
tanks, other transportation areas, sheet metal work, appliances and lighting, wire, and
rivets.
Data points with the AA note have been provided by the Aluminum Association, Inc.
and are NOT FOR DESIGN.
Composition Notes:
Composition information provided by the Aluminum Association and is not for design.
Key Words: UNS A95052; ISO AlMg2.5; Aluminium 5052-H36; AA5052-H36
Vendors: Click here to view all available suppliers for this material.
Please click here if you are a supplier and would like information on how to add your
listing to this material.
Printer friendly version Download as PDF Download to Excel
Add to Folder:
(requires Excel and Windows)
Export data to your CAD/FEA program
Aluminum, Al
Categories: Metal; Nonferrous Metal; Aluminum Alloy; Pure Element
Material Aluminum is a silver-colored, low density (2.7 g/cc) metal that finds use in a huge
Notes: variety of commercial applications. Unalloyed aluminum is ductile, exhibits moderate
strength, and is very resistant to corrosion under most circumstances. Aluminum can
be dramatically strengthened by the addition of appropriate alloying elements (Cu, Mg,
Mn, Si, etc.) and subsequent heat/work treatments. Aluminum is commonly used in
both wrought and cast forms.
The low density of aluminum results in its extensive use in the aerospace industry, and
in other transportation fields. Its resistance to corrosion leads to its use in food and
chemical handling (cookware, pressure vessels, etc.) and to architectural uses.
Over 1175 Al alloys are listed in MatWeb. Aluminum 1199 is the highest purity
(99.99% Al min.) commercially available in structural form.
Vendors: No vendors are listed for this material. Please click here if you are a supplier and
would like information on how to add your listing to this material.
Printer friendly version Download as PDF Download to Excel
Add to Folder:
(requires Excel and Windows)
Export data to your CAD/FEA program
Descriptive Properties
CAS Number 7429-90-5
Aluminum 1050-H14
Categories: Metal; Nonferrous Metal; Aluminum Alloy; 1000 Series Aluminum
Material Data points with the AA note have been provided by the Aluminum Association, Inc.
Notes: and are NOT FOR DESIGN.
Composition Notes:
The aluminum content for unalloyed aluminum not made by a refining process is the
difference between 100.00 percent and the sum of all other analyzed metallic elements
present in amounts of 0.010 percent of more each, expressed to the second decimal
before determining the sum. For alloys and unalloyed aluminum not made by a refining
process, when the specified maximum limit is 0.XX, an observed value or a calculated
value greater than 0.005 but less than 0.010% is rounded off and shown as " less than
0.01%".
Composition information provided by the Aluminum Association and is not for design.
Key Words: Aluminium 1050-H14; UNS A91050; NF A5 (France); DIN Al99.5; AA1050-H14, ASTM
B491; BS 1B (UK); CSA 9950 (Canada); ASTM B491
Vendors: Click here to view all available suppliers for this material.
Please click here if you are a supplier and would like information on how to add your
listing to this material.
Printer friendly version Download as PDF Download to Excel
Add to Folder:
(requires Excel and Windows)
Export data to your CAD/FEA program