Escolar Documentos
Profissional Documentos
Cultura Documentos
FOR RUBBLE
SSR Providing dry/ trap/ granite/ quartzite/
ITEM gneiss rubble stone soling 15 cm to 20
NO. cm thick including hand packing and
21.38 compacting etc. complete
Sp.No. Bd.A. 12 Page No. 264 14.877 Cu.m 945 Rs. 14058.765
05 DAMP PROOF COURSE
SSR Providing and laying damp proof
ITEM course 50 mm thick in M20 cement
NO. concrete layer and bitumen / using
31.01 cement with waterproofing compound
curing, formwork etc. complete.
Bd.J.2 Page No. 355 13.787 Sq.m 320 Rs. 4411.84
REINFORCED CEMENT
CONCRETE
06 FOR FOOTING
SSR Providing and laying Cast in situ/Ready
ITEM Mix cement concrete M-25 of trap /
NO. granite /quartzite/ gneiss metal for
25.13 R.C.C. work in foundations like raft,
strip foundations, grillage and footings
of R.C.C. columns and steel stanchions
etc. including bailing out water, Steel
centering, formwork ,cover blocks,
laying/pumping, compaction and curing
roughening the surface if special finish
is to be provided (Excluding
reinforcement and structural steel) etc.
complete, with fully automatic micro
processor based PLC with SCADA
enabled reversible Drum Type mixer/
concrete Batch mix plant (Pan mixer)
etc. complete. With fine
aggregate (Natural Sand / Crushed sand
VSI Grade finely washed etc) 3.7296 Cu.m 5553 Rs. 20710.46
Sp.No. Bd.F.3 Page No. 298 and B.7,
Page No.38
Institute of Engineering
Name of Work :- Detailed Estimate of R.C.C. Structure Page No:-
ABSTRACT SHEET
FOR COLUMN
SSR Providing and laying Cast in situ/Ready
ITEM Mix cement concrete M-20 of trap /
NO. granite /quartzite/ gneiss metal for
25.31 R.C.C. columns as per detailed designs
and drawing or as directed including
steel centering, formwork, cover
blocks, laying/pumping, compaction
finishing the formed surfaces with
cement mortar 1:3 of sufficient
minimum thickness to give a smooth
and even surface or roughening if
special finish is to be provided and
curing etc. complete,(Excluding
reinforcement and structural steel).with
fully automatic micro processor based
PLC with SCADA enabled reversible
Drum Typemixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With
fine aggregate (Natural Sand / Crushed
sand VSI Grade finely washed etc)
Sp.No.Bd.F.5 Page No. 300 and B.7,
Page.No. 38 9.655 Cu.m 10209 Rs. 98567.895
FOR BEAM
SSR Providing and laying Cast in situ/Ready
ITEM Mix cement concrete M-20 of trap /
NO. granite /quartzite/ gneiss metal for
25.50 R.C.C. beams and lintels as per detailed
designs and drawings or as directed
including steel centering, formwork,
cover blocks, laying/pumping,
compaction and roughening the surface
if special finish is to be provided and
curing etc. complete. (Excluding
reinforcement and structural steel).
With fully automatic micro processor
based PLC with SCADA enabled
reversible Drum Type mixer/ concrete
Batch mix plant (Pan mixer) etc.
complete. With fine aggregate (Natural
Institute of Engineering
Name of Work :- Detailed Estimate of R.C.C. Structure Page No:-
ABSTRACT SHEET
Sand / Crushed sand VSI Grade finely
washed etc)
Sp.No. Bd.F.6 Page No. 300 and B.7, 12.73 Cu.m 9010 Rs. 114697.3
Page No.38
FOR CHAJJA
SSR Providing and laying Cast in situ/Ready
ITEM Mix cement concrete M-20 of trap/
N0. granite/ quartzite/ gneiss metal for
26.05 R.C.C. chajja as per detailed design and
drawings including steel centering,
formwork, cover blocks compacting ,
curing , finishing and roughening the
surface if special finish is to be
provided and curing complete.
(Excluding reinforcement and structural
steel).with fully automatic micro
processor based PLC with SCADA
enabled reversible Drum Type mixer/
concrete Batch mix plant (Pan mixer)
etc. complete. With fine aggregate
(Natural Sand / Crushed sand VSI
Grade finely washed etc) 3.16 Cu.m 10113 Rs. 31957.08
Sp.No Bd.F.9 Page No. 303 and B.7,
Page No.38
SSR
ITEM FOR SLAB
NO. Providing and laying Cast in situ/Ready
25.70 Mix cement concrete M-20 of trap/
granite / quartzite/ gneiss metal for
R.C.C. slabs and landings as per
detailed designs and drawings including
steel centering, formwork, cover
blocks, laying/pumping, compaction
finishing the formed surfaces with
cement mortar 1:3 of sufficient
minimum thickness to give a smooth
and even surface or roughening if
special finish is to be provided and
curing etc. complete,(Excluding
reinforcement and structural steel).with
Institute of Engineering
Name of Work :- Detailed Estimate of R.C.C. Structure Page No:-
ABSTRACT SHEET
fully automatic micro processor based
PLC with SCADA enabled reversible
Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With
fine aggregate (Natural Sand /Crushed 28.877 Cu.m. 10086 Rs. 291253.422
sand VSI Grade finely washed etc)
Sp.No. Bd.F.8 Page No. 302 and B.7,
Page No.38
FOR WALL IN
SSR SUPERSTRUCTURE
ITEM Providing second class Burnt Brick
NO. masonry with conventional/ I.S. type
27.05 bricks in cement mortar 1:6 in
superstructure including striking joints,
raking out joints, watering and
scaffolding etc. Complete 42.89 Cu.m 5307 Rs. 227617.23
Sp.NO.Bd.G.5 Page No. 315
08 PLASTERING
INTERNAL PLASTER
SSR Providing internal cement plaster 6 mm
ITEM thick in a single coat in cement mortar
NO. 1:3 without neeru finish to concrete
32.02 surface in all positions including
scaffolding and curing etc. complete.
Sp.No.Bd.L.1 Page No. 367 723.051 Sq.m 155 Rs. 112072.90
EXTERNAL PLASTER
SSR Providing sand faced plaster externally
ITEM in cement mortar using approved
NO. screened sand, in all positions including
32.11 base coat of 15 mm thick in cement
mortar 1:4 using waterproofing
compound at 1 kg per cement bag
curing the same for not less than 2 days
and keeping the surface of the base coat
rough to receive the sand faced
treatment 6 to 8 mm thick in cement
mortar 1:4 finishing the surface by
taking out grains and curing for
fourteen days scaffolding etc. Complete 307.509 Sq.m 608 Rs. 186965.47
Sp.No.Bd.L.7 Page No. 369.
Institute of Engineering
Name of Work :- Detailed Estimate of R.C.C. Structure Page No:-
ABSTRACT SHEET
09 PAINTING
INTERNAL
COLOUR WASH
SSR Providing and applying colour-wash of
ITEM approved colour and shade in one coat
NO. to new surface including scaffolding,
36.04 brushing and brooming down
(excluding base coats of white wash)
etc. complete. 723.05 Sq.m 7.00 Rs. 5061.35
Sp.No.Bd. P.2 Page No. 412
SSR EXTERNAL
ITEM Providing and applying plastic
NO. emulsion paint of approved quality,
36.14 colour and shade to new surface in
three coats including scaffolding,
preparing the surface. (excluding
primer coat) etc. complete.
Sp.No.Bd.P.6 Page No. 414 and 307.509 Sq.m 87.00 Rs. 26753.283
Preapproval of Superintending
Engineer
10 PAVING FLOORING
SSR Providing and applying plastic
ITEM emulsion paint of approved quality,
NO. colour and shade to old and new
36.12 surfaces in two coats including
scaffolding, preparing the surface.
(excluding the primer coat)etc.
complete. Sp.No.Bd.P.6 Page No. 414 134.515 Sq.m 61.70 Rs. 8299.57
11 PAVING FLOORING, DADO AND
SKIRTING
SSR Providing and fixing in required
Institute of Engineering
Name of Work :- Detailed Estimate of R.C.C. Structure Page No:-
ABSTRACT SHEET
ITEM position skirting or dado of polished
NO. Kotah Stone slab 25 mm to 30 mm
33.81 thick fixed on base on plaster of cement
mortar 1:4 including cement float,
filling joints with cement slurry, curing
rubbing, polishing and cleaning
complete.
Sp.No.As directed by Engineer in
Charge 42.52 Sq.m 1007 Rs. 42817.64
12 PAVING FLOORING FOR STEP
SSR Providing and laying ceramic tiles of
ITEM having size 30 cm x 30 cm confirming
NO. to I.S.15622/2006 (group D II-A) and 7
33.24 to 8 mm thick for flooring in required
position laid on a bed of 1:4 cement
mortar including cement float, filling
joint with white/colour cement slurry
cleaning curing etc. complete.
Sp.No.Bd.M.12 Page No. 385. 20.32 Sq.m 972 Rs. 19751.04
13 SILL
SSR Providing sills of polished Kota stone
ITEM 25 mm to 30mm thick, on a bed of 1:4
NO. cement mortar including cement float,
33.19 filling joints with slurry, curing
polishing and cleaning etc. complete.
Sp.No.Bd.M.29 Page No. 391 5.175 Sq.m 971 Rs. 5024.925
14 WATER PROOFING TREATMENT
TO TERRACE AND BALCONY
SSR Providing cement based water proofing
ITEM treatment to terraces (Indian water
NO. proofing or alike) with brick bats laid in
31.04 required slope to drain the water for any
span after cleaning the base surface.
Applying a coat of cement slurry
admixed with approved water proofing
compound and laying the brick bats on
bottom layer in C.M.1:5 admixed with
approved water proofing compound
filling up to half depth of brick bats,
curing this layer for 3 days, applying
cement slurry over this layer joints of
Institute of Engineering
Name of Work :- Detailed Estimate of R.C.C. Structure Page No:-
ABSTRACT SHEET
brick bats with C.M.1:3 admixed with
approved water proofing compound and
finally top finishing with average 20
mm. thick layers of same mortar added
with jute fiber at 1 Kg per bag including
finishing the surface smooth with
cement slurry admixed with approved
water proofing compound. Marking
finished surface with false squares of
300mm x 300 mm. making the
junctions at the parapet rounded and
tapered top for required height, with
drip mould at the junction of plaster and
parapet and curing and covering 10
years Guarantee against leakproofness
on Court fee stamp paper of Rs. 500/-
including ponding test etc. complete.
Sp.No.As directed by Engineer in 73.35 Sq.m 839 Rs. 61540.65
charge
15 COPING
SSR Providing and laying Cast in situ/Ready
ITEM Mix cement concrete in M-20 of trap/
NO. granite/ quartzite/ gneiss metal for
26.23 R.C.C.coping to plinth or parapet and
sill of doors and windows moulded as
per detailed drawings or chamfered as
approved by the Engineer including
steel centering, formwork, cover
blocks, laying/pumping, compacting ,
curing , finishing and roughening them
if special finish is to be provided and
curing complete. (Excluding
reinforcement and structural steel).with
fully automatic micro processor based
PLC with SCADA enabled reversible
Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With
fine aggregate (Natural Sand / Crushed
sand VSI Grade finely washed etc)
Sp.No.Bd.F.12 Page No.304 and B-
7,Pg 38 0.423 Cu.m 5836 Rs. 2468.628
Institute of Engineering
Name of Work :- Detailed Estimate of R.C.C. Structure Page No:-
ABSTRACT SHEET
16 FOR DOOR D
SSR Providing and fixing Country cut teak
ITEM wood double or single leaf second class
NO. fully panelled door shutter with 35mm
39.04 thick style and rail with 25 mm thick
panels with openable fan light as per
detailed drawings. Excluding the door
frame 60mm x 100mm stainless steel
fixtures and fastening and finishing the
wood work with oil painting 3 coats.
(Excluding the door frame)
Sp.No.BD-T-7 and 8 Page No. 481-82 1.795 Sq.m 7184 Rs. 12895.28
17 FOR DOOR D1
SSR Providing and fixing Country cut teak
ITEM wood single leaf panelled door shutter
NO. without fanlight and 25mm thick as per
39.05 drawing consisting of T.W. top rail size
100mm x 25mm and bottom lock rail
200mm x 25mm insert pannel 12 mm
thick commercial ply faced T.W.
particle board with phenol
formaldehyde synthetic resin
(Generally confirming to ISI 3097)
excluding frame, including stainless
steel fixture and fastening and T.W.
beading to junctions of panelled inserts
and as instructed by the Engineer in
charge including 3 coats of oil painting
etc. complete.
Sp.No.As directed by Engineer in
charge. 12.73 Sq.m 4450 Rs. 56648.5
18 FOR DOOR D2
SSR Providing and fixing solid core flush
ITEM door shutter in single leaf 32 mm thick
NO. decorative type of exterior grade as per
39.09 detailed drawings approved face
veneers 3 mm thick on both faces or as
directed, all necessary beads, mouldings
and lipping, wrought iron hold fasts,
chromium plated fixtures and
fastenings, with brass mortise lock,
Institute of Engineering
Name of Work :- Detailed Estimate of R.C.C. Structure Page No:-
ABSTRACT SHEET
chromium plated handles on both sides,
and finishing with French Polish etc.
complete.
Sp.No.BD-T-34 Page No. 499 5.14 Sq.m 2311 Rs. 11878.54
19 FOR WINDOW W1 , W2 & W3
SSR Providing and fixing in position. (as per
ITEM I.S.1868 / 1982) Aluminium sliding
NO. window of two tracks with rectangular
39.37 pipe having overall dimension 63.50 x
38.10 x 1.02 mm at weight 0.547
kg/Rmt. And window frame bottom
track section 61.85 x 31.75 x 1.20 mm
at weight 0.695 kg/Rmt. Top and side
track section 61.85 x 31.75 x 1.30 mm
at weight 0.659 kg/Rmt. The shutter
should be of bearing bottom 40 x 18 x
1.25 mm at weight 0.417 kg/Rmt. Inter
locking section 40 x 18 x 1.10 mm at
weight 0.469 kg/Rmt. And handle
section 40 x 18 x 1.25 mm at weight
0.417 kg/Rmt. and top section 40 x 18 x
1.25 mm at weight 0.417 kg/Rmt. As
per detailed drawings and as directed by
Engineer in charge with all necessary
Aluminium sections fixtures and
fastenings such as roller bearing in
nylon casting and self locking catch
fitted in vertical section of shutter
including 5 mm thick plain glass with
all required screws and nuts etc,
complete. With colour Anodising with
box.
Sp.No.As directed by Engineer in
charge. 28.35 Sq.m 4831 Rs 136958.85
20 FOR VENTILATOR
SSR Providing and fixing in position powder
ITEM coated aluminium louvered windows /
NO. ventilator of various sizes with powder
39.68 coating as per detailed drawing and
specifications including aluminium
frames 80 x 38 mm x 1.22 mm box 1.920 Sq.m 2688 Rs. 5160.96
Institute of Engineering
Name of Work :- Detailed Estimate of R.C.C. Structure Page No:-
ABSTRACT SHEET
type, 5 mm thick sheet glass louvers, of
approved quality etc. complete.
Sp.No.As directed by Engineer in
charge.
21 HAND RAILING FOR STAIRCASE
SSR Providing and fixing mild steel grill
ITEM railing 15 kg/sq.m with Ghana teak
NO. wood hand rail of size 75mm x 60 mm
40.04 and sill of 75mm.x 25mm and newel
posts for staircases, including
fabricating, fixtures, erecting, painting
the grill work with one coat of
anticorrosive paint and two coats of oil
painting with approved colours and
polishing the sill, hand rail and the
newel post with french polish.
Sp.No.Bd.U.2 Page No. 537 9.0 Sq.m 2056 Rs. 18504
23 STEEL REINFORCEMENT
SSR Providing and fixing in position TMT -
ITEM FE - 500 bar reinforcement of various
NO. diameters for R.C.C. pile caps, footings,
26.33 foundations, slabs, beams columns,
canopies, staircase, newels, chajjas,
lintels pardis, copings, fins, arches etc.
as per detailed designs, drawings and
schedules. including cutting, bending,
hooking the bars, binding with wires or
tack welding and supporting as required
complete.
Sp.No.Bd.F.17, Page No.306 5298.54 Kg 63.994 Rs. 339074.768
1915713.901
TOTAL
Institute of Engineering
Name of Work :- Detailed Estimate of R.C.C. Structure Page No:-
ABSTRACT SHEET
Add 2 % for Work charge Establishment 38314.27
Total 2049813.866