Escolar Documentos
Profissional Documentos
Cultura Documentos
In this Document
What is being announced?
What do you need to do?
Follow Operating System Requirements for OEL 5.x or RHEL 5.x
Follow Installation Requirements for OEL 5.x or RHEL 5.x
Known Issues
References
Applies to:
Oracle Forms - Version: 10.1.2.0.2 and later [Release: Oracle10g and later ]
Oracle Reports Developer - Version: 10.1.2.0.2 and later [Release: Oracle10g and later]
Oracle Discoverer - Version: 10.1.2.0.2 and later [Release: 10.1.2 and later]
Oracle Fusion Middleware - Version: 10.1.2.0.0 to 10.1.2.3.0 [Release: AS10gR2 to AS10gR2]
Linux x86
Linux x86-64
Oracle Application Server 10g Enterprise Edition - Version: 10.1.2.0.0 to 10.1.2.3.0
This document provides supplemental instructions and requirements for installing Oracle Application Server
10g Release 2 (10.1.2.0.2) on the Oracle Enterprise Linux (OEL) 5.x or Red Hat Enterprise Linux (RHEL)
5.x operating systems. It is necessary to then apply Oracle Application Server 10g Release 2, Patch Set 3
(10.1.2.3), to comply with certification provided from the following location:
Oracle has tested this combination and provides this document to list additional requirements,
complementing the Linux Installation Guide and Release Notes:
Oracle Application Server 10g Release 2 (10.1.2.0.2) Release Notes and Installation Guides
[http://download.oracle.com/docs/cd/B14099_19/getstart.htm]
Important:
1 of 9 10/28/2010 04:02 PM
https://support.oracle.com/CSP/main/article?cmd=...
As per the footnotes within Table 1 of the OTN Certification Guide, the following
installation types for the Oracle Application Server 10g Infrastructure are not
supported on OEL 5.x or RHEL 5.x:
This is because the Oracle Database Server 10g release 1 (10.1) is not certified on
these platforms. If requiring these Infrastructure installation types with an Oracle
Database, the recommendation is to install Oracle Database Server 10g Release 2
(10.2). After this the Metadata Repository Creation Assistant (MRCA) version
10.1.2.0.3 can be run, followed by an Identity Management installation type.
(Alternatively, the MRCA 10.1.4.0.1 and Identity Management 10.1.4.0.1 may be
installed for the non-colocated Infrastructure with Oracle Database 10.2).
Therefore, when using Oracle Application Server 10g Release 2 (10.1.2) media,
only the middle-tier and Identity Management installation types are
certified/supported.
Oracle Application Server 10g version 10.1.2 may come in various distributions,
including standalone Oracle HTTP Server, Forms & Reports, and Oracle Web
Cache. These are not certified with this document unless the main Certification
Guide (above link) is stating this.
Oracle Application Server 10g Release 2 10.1.2.0.0 or 10.1.2.0.1 versions are not
supported with Oracle Enterprise Linux (OEL) 5.0 or Red Hat Enterprise Linux
(RHEL) 5.0. It is recommended that version 10.1.2.0.2 be obtained and installed.
1. The following packages (or later versions) must be installed on your Linux x86 or Linux x86-64 system:
binutils-2.16.91.0.5-23.4
gcc-4.1.0-28.4
gcc-c++-4.1.0-28.4
glibc-devel-2.4-31.2
libgcc-4.1.0-28.4
2 of 9 10/28/2010 04:02 PM
https://support.oracle.com/CSP/main/article?cmd=...
libstdc++-devel-4.1.0-28.4
libstdc++-4.1.0-28.4
make-3.80-202.2
compat-db 4.1.25-9
Important:
This document was written for RHEL/OEL 5.0. On future 5.x versions, these
packages may be cumulative to newer packages. Consult operating system vendor
documentation for details. On RHEL/OEL 5.3+, it has been found that a default
installation will have all required packages, newer ones which supersede the above
list. See the installation section of this document in order to pass the pre-requisite
check.
On Linux x86-64, ensure 32-bit packages are in place and always use 32-bit shell
emulation with the "linux32 bash" command before running the installer and any
other Oracle Application Server commands or scripts.
2. Ensure that libXp has been installed. The package libXp was not installed in RHEL 5/OEL 5 with default
RPM packages, so it will need to be installed manually. In RHEL 4 this file was provided by the package
xorg-x11-deprecated-libs which is installed with default package installation but this is not the case for
RHEL5/OEL5 and is now provided with a different rpm, the libXp rpm. Install the package libXp by the
command:
Note: libXp.so.6 can be found by installing the package /Server/libXp-1.0.0-8.1.el5.i386.rpm under Disk3
of the OEL5 media.
[ Reference Note:443617.1 ]
3. The following are two requirements and their locations to obtain them from Oracle:
openmotif21-2.1.30-11.EL5.i386.rpm
3 of 9 10/28/2010 04:02 PM
https://support.oracle.com/CSP/main/article?cmd=...
[http://oss.oracle.com/projects/compat-oracle/dist/files/Enterprise_Linux
/openmotif21-2.1.30-11.EL5.i386.rpm]
xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386.rpm
[http://oss.oracle.com/projects/compat-oracle/dist/files/Enterprise_Linux/xorg-x11-libs-compat-
6.8.2-1.EL.33.0.1.i386.rpm]
4. When installing Oracle Application Server 10g Release 2 (10.1.2.0.2) within the OEL 5.x or RHEL 5.x
operating systems, you will need to supply a new libdb.so.2 or create a symbolic link as root prior to doing
any installations
# ln -s /usr/lib/libgdbm.so.2.0.0 /usr/lib/libdb.so.2
or
Notes:
On some OEL installs, libgdbm.so.2.0.0 may not exist. You can check the following way:
# cat /etc/enterprise-release
Enterprise Linux Enterprise Linux Server release 5.2 (Carthage)
# ls /usr/lib/libgdbm.so.2.0.0
If you are missing the 32-bit version, it can be installed using gdbm.i386 0:1.8.0-26.2.1.
If an error occurs stating that libdb.so.2 already exists, it may have been put into place from a
previous installation. Patch 6078836 was supplied to complete a 10.1.3 certification. In this
case, either move the file for backup and create the symbolic link.
Without this patch or symbolic link in place, httpd will give the following error when starting:
5. The installation of Oracle Application Server 10g Release 2 (10.1.2.0.2) requires the
correct openmotif package to be installed on your OEL 5.x or RHEL 5.x box. Without the
correct package, you will run into installation errors for those components that require
openmotif (such as reports and forms). You may download the RPM package from the
following location:
[http://oss.oracle.com/projects/compat-oracle/dist/files/Enterprise_Linux
/openmotif21-2.1.30-11.EL5.i386.rpm]
As root, you can install this RPM package by issuing the following command:
4 of 9 10/28/2010 04:02 PM
https://support.oracle.com/CSP/main/article?cmd=...
# rpm -i openmotif21-2.1.30-11.EL5.i386.rpm
Important Update:
This document was originally written for RHEL/OEL 5.0. On RHEL/OEL 5.3+, it has
been found that the original pre-requisite checks are no longer required. The above
patch may also fail due to other changes. It is now recommended to use the following
method to start the Installer:
./runInstaller -ignoreSysPreReqs
2. Follow all other instructions from the Installation Guide and Release Notes. This
Metalink Note is only for specific OEL 5.x and RHEL 5.x requirements.
Important:
The Known Issues below are for issues that have been found to occur
during the installation, and require steps to resolve. Depending on your
installation options, review the Known Issues to prevent the errors from
occurring.
3. Apply Patch:5983622, which is the Oracle Application Server 10g Release 2, Patch
Set 3 (10.1.2.3). This is required in order to be fully certified on OEL 5.x or RHEL 5.x.
Reference:
Note:329361.1 Oracle Application Server 10g Release 2 (10.1.2) Support Status and
Alerts
or
Note 415222.1 Steps to Maintain Oracle Application Server 10g Release 2 (10.1.2)
(Doc ID )
5 of 9 10/28/2010 04:02 PM
https://support.oracle.com/CSP/main/article?cmd=...
Known Issues
1. When performing any Oracle Application Server 10g Release 2 (10.1.2) installation, a
pop-up error message box may appear indicating "opmn not started". The error
message box appears just before the root.sh phase of the install. From the command
line, issue the command "opmnctl status" and it should show that opmn is up and
running. Hence, you can ignore this pop-up error message and continue with the
installation.
2. Apply Patch:6690831 if you are performing an Oracle Application Server 10g Release
2 (10.1.2) installation which includes Discoverer. Without this fix, the installation will fail
during the OPMN Configuration Assistant phase because it cannot start up the
Discoverer processes.
oraInstall<date_time>.err
Download Patch:6690831
Unzip it to a working directory
Run the shell script provided in the patch
After shell script runs successfully, go back to OUI install
and press Retry on the OPMN Configuration Assistant
3. Apply the Patch:6706051 if you are performing an Oracle Application Server 10g
Release 2 (10.1.2) installation which includes Oracle Certification Authority (OCA).
Without this fix, the installation will fail during the Oracle Certification Authority
Configuration Assistant phase. The issue can be fixed following the below steps:
Download Patch:6706051
Unzip it to a working directory
6 of 9 10/28/2010 04:02 PM
https://support.oracle.com/CSP/main/article?cmd=...
4. Any installation of Oracle Application Server 10g Release 2 (10.1.2.0.2) on OEL 5.x or
RHEL 5.x in which Reports is getting installed will fail with reports relinking errors
In order to prevent this, download and apply the required RPM listed below:
[http://oss.oracle.com/projects/compat-oracle/dist/files/Enterprise_Linux/xorg-x11-libs-
compat-6.8.2-1.EL.33.0.1.i386.rpm]
As root, you can install this RPM package by issuing the following command
# rpm -i xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386.rpm
After the RPM, is installed, you will also need to override the /usr/lib/libXtst.so.6 with
the one from /usr/X11R6/lib/libXtst.so.6. As root, issue the commands:
# mv /usr/lib/libXtst.so.6 /usr/lib/libXtst.so.6.ORG
# ln -s /usr/X11R6/lib/libXtst.so.6 /usr/lib/libXtst.so.6
Note:
On future OEL 5.x and RHEL 5.x versions, these packages may be
cumulative to newer packages. Consult operating system vendor
documentation for details.
7 of 9 10/28/2010 04:02 PM
https://support.oracle.com/CSP/main/article?cmd=...
5. Simplified Chinese and Traditional Chinese fonts are missing in OEL 5 with update
levels less than 3 (OEL5.3). On this level, the product in Simplified Chinese and
Traditional
Chinese language can not be accomplished without a specific package installed.
Solution:
If you have an OEL5 version with update level 2 or lower, install the following package:
fonts-chinese-3.02-12.el5.noarch.rpm
Error while loading shared libraries: libstdc++-libc6.2-2.so.3: cannot open shared object
file: No such file or directory.
Solution:
Install compat-libstdc++-296-2.96-132.7.2
Added Keywords:
Red-Hat Redhat RHEL "Red Hat ES" certified "Oracle Enterprise Linux" OEL compatible
compatibility OAS IAS AS10g AS10GR2 ORACLEAS OAS1012 IAS1012
References
NOTE:329361.1 - Oracle Application Server 10g Release 2 (10.1.2) Support Status and Alerts
NOTE:431578.1 - How to Find Certification Details for Oracle Application Server 10g and Oracle Fusion
Middleware 11g
NOTE:433061.1 - How to Obtain Application Server 10g Media, Patchsets, and Patches
NOTE:947193.1 - Oracle Application Server 10g Release 2 (10.1.2) Install Certifications on Linux
Platforms
Related
8 of 9 10/28/2010 04:02 PM
https://support.oracle.com/CSP/main/article?cmd=...
Products
Middleware > Developer Tools > Database & PLSQL > Oracle Forms
Middleware > Developer Tools > Database & PLSQL > Oracle Reports Developer
Middleware > Business Intelligence > Discoverer > Oracle Discoverer
Middleware > Application Servers > Oracle Application Server > Oracle Fusion Middleware
Keywords
XP-1; ERROR 1
Back to top
9 of 9 10/28/2010 04:02 PM