Você está na página 1de 53

SUSTAINABLE DESIGN

Sustainable Design • BSA LIFESTRUCTURES

6.25M
SQUARE FEET OF SPACE DESIGNED
Designing for High Performance Facilities
The benefits of sustainable design are abundant. Hospitals can significantly reduce their
UNDER A SET OF RECOGNIZED operational costs and create better healing environments, universities can further enhance
SUSTAINABLE CONSTRUCTION STANDARDS their reputations as environmental stewards and laboratories can become more energy
efficient. In addition to reducing carbon footprints through sustainable design, owners must
also continue to fulfill the needs of their staff and remain competitive in the marketplace. In
short, sustainable design needs to be a natural outcome of the built environment.

BSA LifeStructures works with clients to connect the financial, environmental and social
aspects of sustainable design. The firm leverages their multidisciplinary design staff to
conduct eco-charettes where attainable and agreed upon project sustainability goals are
determined.

BSA LifeStructures’ portfolio includes LEED, Green Guide for Healthcare and Energy
Star certified designs. Regardless of what level of sustainable design clients pursue, BSA
LifeStructures’ design responds to meet the global climate for high performance facilities.

LEED CERTIFIED
Notable Sustainable Design Projects

GREEN GLOBES
ENERGY STAR
LEED SILVER
LEED GOLD

CLIENT / PROJECT PROJECT MILESTONE

BSA LifeStructures / Chicago Office Firm’s 1st LEED Gold project

Community Hospital / South Campus Expansion Firm’s 1st hospital designed for Energy Star

Indiana University / Innovation Center High-density lab incubator environment

Indianapolis Airport Authority / Midfield Terminal 1st U.S. LEED Certified airport terminal

Purdue University / Lyles-Porter Hall Firm’s 1st Green Globes project

Swedish Covenant Hospital / Foster Medical Pavilion Firm’s 1st high-rise LEED project

University of Notre Dame / Stinson-Remick Hall 1st LEED building on ND campus


Sustainable Design • BSA LIFESTRUCTURES

The following is a list of all projects either designed or completed where a


recognized set of sustainable design standards were applied. The list includes

GREEN GUIDE FOR HC


both certified projects and projects with pending certification.
1
Registered for Certification

LEED CERTIFIED

GREEN GLOBES
FACILITY TYPE 2
2
H=Healing, L=Learning, D=Discovery, O=Other

LEED RATING 3

ENERGY STAR
LEED SILVER
3
CI=Commercial Interiors, CS=Core & Shell, NC=New Construction, HC=Healthcare

LEED GOLD
CLIENT / PROJECT
BP / Cantera III Office Building Renovation D CI 
BSA LifeStructures / Chicago Office Renovation O CI 
BSA LifeStructures / St. Louis Office Renovation 1 O CI 
Butler University / College of Pharmacy & Health Sciences Expansion L NC 
Community Health Network / Community Hospital South Campus Expansion 1 H  
Confidential Client / Research and Development Laboratory Building 314 D NC 
Eskenazi Health Foundation / Sidney & Lois Eskenazi Hospital Campus 1
H NC 
General Services Administration / Minton-Capehart Federal Building Modernization O CI 
Indiana University / Hodge Hall Undergraduate Center 1 L NC 
Indiana University / Innovation Center D NC 
Indiana University / Neuroscience Research Building D NC 
Indiana University / Science and Engineering Laboratory Building L NC 
Indiana University Health / Riley Hospital for Children Simon Family Tower H CI 
Indianapolis Airport Authority / New Midfield Terminal O NC 
Joliet Junior College / Health Professions Center L NC 
Lakeland HealthCare / Marie Yeager Cancer Center 1
H NC 
Marian University / Michael A. Evans Center for Health Sciences L NC 
Marquette General Hospital / Medical Office Building H CS 
Monsanto / Vegetable Seeds B-12 Building D NC 
Posey Township Clay County / Fire Station 1 O NC 
Purdue University / France Córdova Recreational Sports Center Domestic Water Study L NC 
Purdue University / Drug Discovery Building D 
Purdue University / Lyles-Porter Hall D 
Saint Luke’s Health System, Inc. / New Corporate Offices Phases 1-3 H CI 
SSM Health / 34th Street Road Extension 1 H 
SSM Health / Good Samaritan Hospital 1
H  
St. Thomas Medical Center / Medical Office Building Core and Shell H CS 
St.Vincent Health System / St.Vincent Fishers Hospital H HC 
Swedish Covenant Hospital / Foster Medical Pavilion H CS 
University of Illinois at Urbana-Champaign / Everitt Laboratory Renovation 1
D NC 
University of Notre Dame / McCourtney Hall 1
L NC 
University of Notre Dame / Stinson-Remick Hall L NC 
Woodlawn Hospital / Hospital Addition and Medical Office Building H NC 
BSA LifeStructures
Chicago Office Renovation
BSA LifeStructures’ Chicago office is located on the eighth floor of the landmark 1920s era Jeweler’s
Building. The floor was originally designed as an indoor parking garage and was built with a floor-to-
floor height of less than 11 feet. This resulted in a very tight ceiling condition near the building core
due to the low structure and large mechanical ducts supplying the space.

The design team responded by layering Key Features Project Details


the ceiling planes toward the exterior
walls, bringing natural light and dramatic • 30% water use reduction through use of Chicago, Illinois
views of the Chicago River into the office. water efficient fixtures
Size 11,800 sf (renovated)
Transparent enclosures for the board room • 90% of eligible equipment is ENERGY
STAR rated Cost N/A
and conference rooms allow the space
visually to expand toward the outside. Date 2009
• Daylight harvesting lighting control
system and occupancy sensors reduced Services
The project is an example of how offices
lighting power density to 28% below the Interior Design
can incorporate sustainable interior design.
ASHRAE 90.1 standard
Sustainable design features include custom
high-efficiency daylight-responsive lighting • HVAC equipment efficiency and zoning
fixtures, sustainably harvested European controls
Acacia flooring and significantly reduced • 75% of construction waste recycled and
energy use for electrical and HVAC needs. diverted from landfill
• All materials were 10% recycled content
(post consumer + ½ pre consumer)
• 20% of all material was manufactured
within 500 miles of Chicago
LEED Facts
for LEED ID+C: Commercial Interiors
(v2.0)

Certification awarded Jan 2010

Gold 35

Sustainable sites 4/7


Water efficiency 2/2
Energy & atmosphere 7/12
Material & resources 6/14
Indoor environmental quality 11/17
Innovation 5/5
Swedish Covenant Hospital
Foster Medical Pavilion
This medical pavilion provides much needed physician office space with a new eight-story medical
office building. The outpatient building can house up to 30 new doctors’ offices, a surgery center, a
pharmacy, a restaurant and a 260-space parking structure that the medical office building sits atop.

The original goal of the project was to Key Features Project Details
create a LEED Silver facility with minimal
operations and maintenance complications. • Variable speed heat recovery chiller Chicago, Illinois
Special attention was paid to the • Condensing hot water boilers
Size 237,938 sf (new)
installation of meters to measure building • 20% energy savings over ASHRAE 90.1- Cost $40.2 M
energy and water consumption, both total 2007 Date September 2012
and by system. Integrating a combination • Automatic occupancy-based lighting
of sustainability measures resulted in LEED control systems Services
Gold certification. Architectural Design
• Variable flow chilled water system
Mechanical, Electrical and Plumbing
• 57% reduction in water usage
Engineering
• Atypical chilled beam cooling system that
helped reduce energy consumption by
31% over baseline
• Enclosure features aluminum composite
metal panels, high performance
curtainwall, perforated metal panels and
a green roof
• Low VOC materials
• Enhanced commissioning
LEED Facts
for LEED for Core & Shell Development
(v2009)

Certification awarded May 2013

Gold 63

Sustainable sites 21/28


Water efficiency 7/10
Energy & atmosphere 17/37
Material & resources 7/13
Indoor environmental quality 7/12
Innovation 1/6
Regional Priority 3/4
Butler University
College of Pharmacy & Health Sciences
Butler University’s College of Pharmacy & Health Sciences Building provides student-centered,
active learning environments and faculty research labs. By designing team-oriented learning spaces
that deemphasize the role of the instructor, students are encouraged to take a more active role in an
immersive learning environment.

Students practice patient assessment Key Features Project Details


skills in a clinical environment within
this building addition. The clinical lab • Constructed from more than 30% Indianapolis, Indiana
includes eight individual patient exam recycled content
Size 32,000 sf (new)
stations and open space for classroom • 40% of building materials extracted and
manufactured within 500 miles of campus Cost $7.8 M
instruction and demonstrations. Student
interaction is stressed through flexible Date October 2009
• Adhesives, sealants, paints, coatings
room configurations and multiple projection and carpet systems contain low levels of Services
screens. Breakout rooms are used for Volatile Organic Compounds (VOCs) Laboratory Planning
team-based work, smaller group exercises • Energy-efficient equipment makes the
and evaluations. building 30% more energy efficient than
Faculty research labs are spacious and a comparable building
flexible with specialized spaces for mass • Dual flush toilets and low-flow urinals,
spectrometry, tissue culture, fluorescent sinks and showers to conserve almost
microscopy, an environmental room and a 300,000 gallons of water each year
radioisotope lab. • 90% of regularly occupied rooms have
access to windows
• 90% of occupants have individual lighting
controls
• 50% of offices have thermostats
LEED Facts
for LEED BD+C New Construction
(v2.2)

Certification awarded Apr 2010

Gold 40

Sustainable sites 7/14


Water efficiency 4/5
Energy & atmosphere 10/17
Material & resources 5/13
Indoor environmental quality 9/15
Innovation 5/5
Indiana University
Neuroscience Research Building
The Neuroscience Research Building provides research space for psychiatry, neurology,
neurosurgery and basic neuroscience research. Bringing these neurology disciplines together, the
facility represents a national model for collaborative, transdisciplinary patient care, research and
education.

Activities in this facility are focused on Key Features Project Details


translating discoveries in the neurosciences
into readily available medicinal solutions. A • Achieved 24 site related LEED credits Indianapolis, Indiana
decentralized vertical vivarium offers space • Water efficient landscaping design
• Low flow plumbing fixtures Size 140,700 sf (new)
for discoveries in the behavioral sciences.
Cost $37.3 M
Combining research and clinics together • Community connectivity to People Mover
expedites the transition and positions and public transportation Date February 2014
IU School of Medicine as a leader in the • Reflective pavement materials used to Services
creation and development of treatments. reduce heat island effect Planning
• Stormwater Quality Treatment Units Programming
• Complex phasing of utilities on a Architectural Design
compact urban site
Civil, Mechanical, Electrical, Plumbing and
• Bicycle storage and changing rooms Structural Engineering
LEED Facts
for LEED BD+C New Construction
(v2009)

Certification awarded Aug 2014

Gold 62

Sustainable sites 18/26


Water efficiency 7/10
Energy & atmosphere 15/35
Material & resources 5/14
Indoor environmental quality 8/15
Innovation 5/6
Regional Priority 4/4
University of Notre Dame
Stinson-Remick Hall
Stinson-Remick Hall lives and breathes learning. From the highly adaptable learning center, to
viewing areas of the nanotechnology clean room, to the solar energy roof lab, the building is a
testament to the university’s dedication to the field of engineering.

This high-tech facility supports innovative Key Features Project Details


approaches to teaching and allows
undergraduate engineering majors to • 237K BTU / yr / sf, 18% below ASHRAE Notre Dame, Indiana
be involved in research activities. A key 90.1 requirement
Size 160,000 sf (new)
feature of the design is transparency. See- • 455,000 CFM total in laboratories and
clean rooms Cost $70 M
through glass walls highlight clean room
activities including micro-device fabrication Date December 2009
• Water side heat recovery economizer
and processing. Throughout the building, • Runaround heat recovery system Services
engineering is on display to enhance the Architectural Design
• Photovoltaic array
connectivity between researchers and
• Gas fired mini turbine produces heat and Laboratory Planning and Design
students.
electricity Mechanical, Electrical and Plumbing
• Occupancy sensor control of lighting and Engineering
HVAC
• Integrated electrical metering points
• EMI mitigation throughout
LEED Facts
for LEED BD+C New Construction
(v2.2)

Certification awarded Aug 2010

Gold 39

Sustainable sites 11/14


Water efficiency 3/5
Energy & atmosphere 5/17
Material & resources 6/13
Indoor environmental quality 9/15
Innovation 5/5
Joliet Junior College
Health Professions Center
The Department of Nursing, Allied Health and Emergency Services at Joliet Junior College prepares
students to practice in an evolving healthcare system. Joliet Junior College has created and
expanded health-related programs in response to community needs and trends showing workforce
shortages in most healthcare areas.

The new center helps the college expand Key Features Project Details
and add programs in high demand fields
– such as nursing, radiologic technology, • 37% more efficient than a standard Joliet, Illinois
physical therapy and dental hygiene - facility of the same size
Size 124,000 sf (new)
by providing much needed space and • Solar shading systems prevent glare
and excessive heat while allowing strong Cost $32.3 M
consolidating programs previously spread
throughout campus. views Date October 2013
• Chilled air beam system reduces duct Services
Flexible learning environments allow
sizes, maximizes fresh air and cools Planning and Design of health professions
collaboration among the labs, faculty
rooms efficiently spaces including classrooms and
and students. Integrated technology and
improved spaces enhance the educational • A geothermal system beneath the laboratories
and work environments, aiding in parking lot reduces heating / cooling load
recruitment and retention of top faculty and • LED light fixtures
students. Simulation labs create realistic • Highly efficient exterior envelope that
spaces that advance the education of reduces operations expenses
students and provide hands-on experience
in a risk-free environment. Simulation labs
include an Emergency Services apparatus
room with space for a fire truck and
ambulance.
LEED Facts
for LEED BD+C New Construction
(v2009)

Certification awarded Jul 2013

Gold 65

Sustainable sites 11/26


Water efficiency 6/10
Energy & atmosphere 20/35
Material & resources 7/14
Indoor environmental quality 11/15
Innovation 6/6
Regional Priority 4/4
Marian University
Michael A. Evans Center for Health Sciences
The Michael A. Evans Center for Health Sciences accommodates 600 nursing and osteopathic
medicine students. Skill labs and simulation rooms provide hands-on training while seminar and study
rooms encourage team-based problem-solving. Adjacent nursing classrooms and medical seminar
rooms provide side-by-side training.

BSA LifeStructures and Browning Key Features Project Details


Investments worked in conjunction with
local healthcare organizations to design a • Constructed from more than 30% Indianapolis, Indiana
new facility that enables interprofessional recycled content
Size 140,000 sf
training and maximizes experiential • Water-cooled VRF (variable refrigerant
flow) mechanical system is 26% more Cost $29.2 M
learning. Hospitals provided input on their
expectations for new graduates and how efficient than ASHRAE 90.1 – 2007 Date July 2013
to best prepare students for the healthcare threshold
Services
environments where they will be working. • Additional sustainable features include Planning
ways to minimize energy and water Architectural Design
usage, encourage alternate forms of
Civil, Mechanical, Electrical and Plumbing
transportation and reduce water runoff
Engineering
LEED Facts
for LEED BD+C New Construction
(v2009)

Certification awarded March 2014

Gold 62

Sustainable sites 21/26


Water efficiency 7/10
Energy & atmosphere 12/35
Material & resources 5/14
Indoor environmental quality 9/15
Innovation 5/6
Regional Priority 3/4
Purdue University, France A.
Córdova Recreational Sports Center
BSA LifeStructures provided mechanical, electrical and plumbing engineering services for this new
and expanded four-story wellness center.

The center features an aquatic center, Key Features Project Details


indoor turf center, 50’ climbing wall,
student/faculty fitness areas and • Heat recovery systems West Lafayette, Indiana
multipurpose rooms and 11 gymnasiums. • Sophisticated controls for optimal energy
Size 322,000 sf (new and renovation)
efficiency
Visitors are welcomed with an inviting Cost $52.9 M
• Water-efficient fixtures
glass entry that envelopes the exterior. The Date October 2012
atrium serves as a gathering space and • Used regional and recyclable materials
connects to amenities such as the meeting • Open floor plan and glare-reducing Services
and conference spaces as well as saunas window glazing allow natural daylight into Mechanical, Electrical and Plumbing
and massage therapy rooms. the facility Engineering
• Native vegetation eliminate the need for
The heating, ventilation and air conditioning irrigation
systems included campus chilled water
cooling, heating hot water reheat, custom
recirculated air handling units with a total
recovery heat wheel and custom pool air
handling dehumidification units to serve the
pool areas.
LEED Facts
for LEED BD+C: New Construction
(v2.2)

Certification awarded Oct 2014

Gold 39

Sustainable sites 9/14


Water efficiency 4/5
Energy & atmosphere 6/17
Material & resources 6/13
Indoor environmental quality 9/15
Innovation 5/5
Minton-Capehart Federal Building
HVAC & Life Safety Modernization
BSA LifeStructures performed Third-Party Commissioning of the mechanical, electrical and plumbing
systems replacements for this federal office building originally built in 1974. Design reviews were
performed by registered engineers at two stages prior to construction documents.

Key Systems Commissioned Project Details


• Four air handling units utilizing fan wall • Domestic hot water system Indianapolis, Indiana
technology, high-efficiency filtration and • Lighting control system
UV lights for contaminant reduction Size 636,046 sf
• Mural lighting control system
totaling 308,000 CFM Cost $46.5 M ($193,000 fee)
• Lobby security system Date June 2012
• Variable volume air distribution system
• Stair pressurization system
with demand controlled ventilation Services
• Exhaust systems including kitchen Third-Party Commissioning
exhaust system
• 1,000-ton chilled water plant featuring
variable speed magnetic bearing
centrifugal chillers central heating water
system
• Glycol preheat water system
• Building management system
• 650 kW emergency power system
• Main switchgear
LEED Facts
for LEED ID+C: Commercial Interiors
(v2.0)

Certification awarded Feb 2013

Gold 32

Sustainable sites 3/7


Water efficiency 2/2
Energy & atmosphere 3/12
Material & resources 10/14
Indoor environmental quality 9/17
Innovation 5/5
Indiana University
Innovation Center
This laboratory incubator is dedicated to developing new technology based companies and further
augments research activity in Bloomington. It supports the university’s research and life science
missions and fosters business activity that will benefit the local community and the state of Indiana.
1,500 or more square feet or more of flexible office, dry lab or wet lab space can be built out quickly
for these new companies.

The second floor wet labs are grouped Key Features Project Details
together to provide the flexibility to lease
individually or as larger lab spaces, as • East / west orientation and large areas Bloomington, Indiana
they can easily be subdivided to lease of glazing on all sides maximizes
daylighting and view potentials Size 40,000 sf (new)
in increments of 300 square feet. The
• Dual flush toilets, low flow sinks, showers Cost $10.5 M
structure is designed for heavy research
work and vibration sensitive equipment. and urinals and ultra low flow lavatories Date July 2009
use more than 40% potable water
The simple building form conveys a Services
• 35% of building materials were Planning
straightforward organizational layout with a
manufactured from recycled materials Architectural Design
central circulation spine / core element that
anchors the north and south wings (each • Almost 40% of building materials were Laboratory Planning
of which are subtle variations on a theme). extracted, harvested or recovered Engineering
The main entrance, located at the northeast or manufactured within 500 miles of
corner of the building, creates a dramatic Bloomington
and transparent entry / lobby element to • Automated lighting controls are energy
both invite and engage staff and visitors efficient
to the facility while still accommodating • Domestic water heater specified to be
a future 30,000-square-foot eastern a 94% efficient, condensing-style water
expansion. heater
LEED Facts
for LEED BD+C: New Construction
(v2.2)

Certification awarded Dec 2009

Silver 37

Sustainable sites 4/5


Water efficiency 5/17
Energy & atmosphere 20/35
Material & resources 5/13
Indoor environmental quality 12/15
Innovation 4/5
Indiana University
Science and Engineering Laboratory Building
The new building provides critical multidisciplinary teaching and research laboratory space. In support
of the life and health science missions of IUPUI, this facility is designed to foster collaboration and
provide flexibility to meet the significant planned growth of the research programs.

A two-story commons connects to the Key Features Project Details


quad acting as a student and faculty
hub, while also serving as the primary • 249K BTU / yr / sf, 22% below ASHRAE Indianapolis, Indiana
building entrance and gathering space. 90.1 requirement
Size 71,400 sf (new)
Public spaces complement the first floor • Chilled beam air delivery
Cost $26.2 M
biology and forensics instructional labs • Runaround heat recovery of lab exhaust
by encouraging student-to-student and Date September 2013
• Heat wheel heat recovery of general
student-to-faculty interaction. The second exhaust Services
level, with a mixture of faculty offices Planning
• Steam condensate heat recovery
and research labs, is organized around
• Innovative stormwater management Programming
a block of biomedical engineering labs. A
• Rain gardens Architectural Design
new science animal resource center area
provides support for research programs. Laboratory Planning
• Bicycle storage and changing rooms
Engineering
The building houses the Richard G. • Community connectivity to Cultural Trail
Cost Estimation
Lugar Center for Renewable Energy, an • Native and adaptive plantings
organization that addresses the needs • Reflective pavement materials reduce
for clean, affordable, renewable energy heat island effect
sources while improving the nation’s
energy security and helping to mitigate the
negative impacts of climate change.
LEED Facts
for LEED BD+C: New Construction
(v2009)

Certification awarded May 2014

Silver 58

Sustainable sites 19/26


Water efficiency 7/10
Energy & atmosphere 12/35
Material & resources 4/14
Indoor environmental quality 9/15
Innovation 3/6
Regional priority 4/4
Indiana University Health
Riley Hospital Simon Family Tower
The Simon Family Tower is a new 10-story, 675,000 sf addition to Riley Hospital for Children
at Indiana University Health designed to add capacity and enhance patient satisfaction. BSA
LifeStructures designed the engineering systems for phase two of the project with a focus on
minimizing waste and maximizing efficiency.

Phase two of the Simon Family Tower Key Features Project Details
project was the first project in Indiana
to use an Integrated Project Delivery • Mechanical and electrical design uses Indianapolis, Indiana
approach. The IPD team measured their energy conservation practices
Size 675,000 sf (new)
results against mutually-agreed upon • Exterior skin is sealed to ensure
substantial energy savings Cost $475.0 M
project goals relative to schedule, safety
and long term hospital operational goals Date 2013
• 90% of all demolished material from the
relative to cost, quality and satisfaction. The original building was recycled Services
project team used Lean design methods • All wood doors and 1,838 light bulbs Third-Party Commissioning for Mechanical
to create a mock-up patient room that the were removed for recycling prior to and Plumbing Systems as part of Phase
client could walk-through and comment on. demolition One
This process saved $325,000 in potential
• All concrete was recycled and crushed Engineering Systems Design for Phase
reconstruction.
into gravel for reuse Two
• More than 26,000 pounds of copper
pipes were recycled
LEED Facts
for LEED ID+C: Commercial Interiors
(v2009)

Certification awarded April 2013

Silver 51

Sustainable sites 14/21


Water efficiency 0/11
Energy & atmosphere 17/37
Material & resources 5/14
Indoor environmental quality 10/17
Innovation 3/6
Regional priority 3/4
Confidential Client
Laboratory Building 314
This agricultural biotechnology research building is a two-story expansion connected to the client’s
existing research building. The facility supports 160 new employees in a state-of-the-art biotech and
bioprocessing lab environment. The lab and lab support spaces occupy more than half of the building.
Additionally, the building features a new 14,000-square-foot greenhouse expansion.

The office and common spaces are • System polls the ISO 7 clean spaces to Project Details
designed to promote collaboration among lower air change rate while maintaining
employees and use wood veneer, stone, particle count below acceptable levels Indianapolis, Indiana
tile and decorative lighting to move away • Relay-based lighting control system Size 200,000 sf
from traditional institutional design. The utilizing occupancy sensors and daylight Cost $75 M
new addition is separated from the existing harvesting lowers electrical consumption
building by a landscaped courtyard. Date November 2012
for lighting and allows for temperature
setback control Services
Key Features
• T5 fluorescent fixtures throughout building Planning
• Runaround heat recovery system • Low flow and dual flush plumbing fixtures Architectural Design
precools and preheats the outdoor air and zero potable water irrigation limit Civil, Mechanical, Electrical and Plumbing
laboratory AHUs water consumption Engineering
• Free cooling loop serves winter cooling • Water cooled laboratory air and vacuum
demands for a limited amount of fan coil systems reduce energy consumption
units serving high sensible load type
• Bio-retention swales to improve
spaces
stormwater quality
• Lab air quality monitoring system allows
• Low emitting and fuel efficient vehicle
air change rate to be lowered while
parking
maintaining a high level of safety
LEED Facts
for LEED New Construction 2009

Certification awarded 2014

Certified 40

Sustainable sites 8/26


Water efficiency 4/10
Energy & atmosphere 6/35
Material & resources 7/14
Indoor environmental quality 7/15
Innovation 5/5
Regional Priority 3/5
Monsanto
Vegetable Seeds B-12 Building
This seed research facility features an abundance of cutting-edge laboratories, including a HTL /
Chippers lab, mycology lab, DNA lab, bacteriology lab and a diagnostics lab. The facility will improve
the seed’s ability to fight off diseases and provide consumers better vegetables and healthier oils.

The new facility consolidates research Key Features Project Details


efforts into a common structure that
promotes efficiency and improves worker • 14% energy performance above ASHRAE Woodland, California
morale by giving them a common home. 90.1
Size 90,000 (new)
The unified space also allows the client to • Building lighting control system
Cost $ 24 M
give tours of the groundbreaking research incorporates time of day control, daylight
harvesting and bilevel lighting control Date May 2013
occurring in their labs. By using a back-of-
house and front-of-house design approach, indoors and outdoors Services
operational procedures are kept out of • Empty conduits routed to parking lot for Architectural Design
public spaces, thus improving efficiency future solar arrays and vehicle coverage
and keeping corridors and visitor spaces • Low flow fixtures reduce water use by
clean. 35%
• Native plants and drip irrigation reduce
irrigation water by 50%
LEED Facts
for LEED BD+C: New Construction
(v2009)

Certification awarded May 2015

Certified 42

Sustainable sites 12/26


Water efficiency 4/10
Energy & atmosphere 6/35
Material & resources 5/14
Indoor environmental quality 9/15
Innovation 4/6
Regional Priority 2/4
Indianapolis Airport Authority
New Midfield Terminal
BSA LifeStructures and its aviation affiliate (Aviation Capital Management LLC) served as the
Owner’s Technical Representative. The project consists of a two-square-mile site that includes a
new terminal building with two connected concourses serving 40 aircraft gates, a replacement air
traffic control tower and 17,700 parking spaces served by a new airport parkway entering from a new
intersection. The project involved relocating a large section of a nearby highway.

The new 1,260,000-square-foot terminal Key Features Project Details


includes the fully integrated Airport
Management System with biometric • Natural light throughout 75% of the Indianapolis, Indiana
security, a large central concessions court building
Size 1.26 M sf (new)
that serves as both a display area and a • Construction recycled 7,000 tons of old
taxiway and roadway material as site fill Cost $1.1 B
central meeting-greeting hall and a fully
automated baggage handling system Date September 2008
• More than 90% of materials came from
(with capacity for 100 percent baggage within a 500 miles of Indianapolis Services
screening). A well-coordinated arts program • Custom roof evenly distributes natural Owner’s Technical Representative
is an important feature of the project. light, reflects heat, channels water and
A vast utility infrastructure system is harnesses airflows that draw clean air
required to provide drainage and the through the space
project includes a service tunnel under the • Roof channels rainwater for collection
north parallel runway, which connects to and use inside the terminal
an existing power plant. Stormwater quality • Natural convection heating and cooling
was an important goal for the entire project. system saves 21% in energy usage by
supplying cool air only to space occupied
The Midfield Terminal is the first LEED by passengers
certified terminal in the United States.
• LEED features save $2 million / year
LEED Facts
for LEED BD+C: New Construction
(v2.1)

Certification awarded Nov 2011

Certified 29
St.Vincent Health
St.Vincent Fishers Hospital
St.Vincent Fishers Hospital wanted to create a highly reliable and efficient ministry with quality
accommodations and a caring environment operating in a spirit of love, holistic healing and outreach
to others.

BSA LifeStructures worked on the planning Key Features Project Details


and design for a phased expansion to the
St.Vincent Fishers Campus. • 14% energy savings over ASHRAE 90.1- Fishers, Indiana
2007
Sustainable design measures were Size 131,777 sf (new)
• 151K BTU / yr / sf energy consumed
implemented in how the building was 33,572 sf (renovated)
• 100% outdoor air with 80% effective heat
sited and what landscaping was used, Cost $36.6 M
recovery wheels for patient rooms
and throughout the design impacting Date February 2013
the exterior skin, interior finishes and • Heat recovery chillers
mechanical systems of the building. • Condensing hot water boilers Services
Acoustically-designed glazing for the • VAV kitchen hoods Planning, Design, Energy Modeling
windows that face the interstate result in • Water-cooled kitchen equipment
significant noise reduction. White roofing
• 35% reduction in water use
materials with a high solar reflectivity
reduce heat absorption that negatively • Sub-meter of gas / water use
impacts local environments and increases • Top 20% performer within the
energy cost for cooling. Department of Energy’s Building
Performance database of inpatient
St.Vincent Fishers is the first hospital in hospitals
Indiana to receive the USGBC’s LEED for • Occupancy sensors for lighting and
healthcare designation. temperature
LEED Facts
for LEED BD+C: Healthcare v3
(v2009)

Certification awarded October 2015

Certified 40

Sustainable sites 7/18


Water efficiency 2/9
Energy & atmosphere 7/39
Material & resources 7/16
Indoor environmental quality 8/18
Innovation 6/6
Regional Priority 3/4
Marquette General Hospital
Medical Office Building
Marquette General Hospital’s outdated medical office building’s maintenance needs could not keep
up with the ever-evolving fields of medicine. A new medical office building was constructed to house
state-of-the-art state practices, improve the overall patient experience and provide better operational
efficiency.

The two-story medical office building is Key Features Project Details


located on a 5.5-acre site near two major
highways to provide needed visibility and • Materials include low or no VOC paints, Escanaba, Michigan
patient access. The BSA LifeStructures adhesives, carpet and vinyl floor
coverings Size 43,145 sf (new)
design team met with each tenant to
• More than 40% construction materials Cost $11 M
obtain information on each group’s specific
programming needs. manufactured within 500 miles of Date September 2012
Escanaba
Structural precast panels that require no Services
• More than 20% of the materials used Architectural Design
exterior braces were utilized to provide
incorporate recycled materials
design flexibility. The entry canopy protects Client
patients as they enter and exit the facility. • Toilets, urinals and handwashing sinks in
the public restrooms have low-flow flush Duke Realty Corporation
The medical office building includes an valves and faucets
expanded specialty clinic, a healing garden • 12% reduction of energy use over similar
and an open-format lobby. buildings
LEED Facts
for LEED BD+C: Core and Shell
(v2009)

Certification awarded Jan 2014

Certified 40

Sustainable sites 10/28


Water efficiency 2/10
Energy & atmosphere 8/37
Material & resources 4/13
Indoor environmental quality 9/12
Innovation 5/6
Regional Priority 2/4
Woodlawn Hospital
Hospital Addition and MOB
While honoring its past with a 100 Year Celebration, Woodlawn Hospital is clearly focused on
the future. To create a road map for future facility growth, Woodlawn Hospital engaged BSA
LifeStructures to create a strategic master facility plan. The primary goal was to assess the current
facilities, and based upon that appraisal, develop a plan for consolidation, elimination or addition of
new facilities and assets.

To gain an understanding of hospital Key Features Project Details


operations, the planning team worked
closely with stakeholders, conducting • Design preserved and integrated the Rochester, Indiana
staff interviews and utilizing facility natural wildlife surrounding the hospital
Size 46,000 sf (new)
tours. Program planning analysis, space • Combination of an energy-efficient
4,735 sf (renovated)
projections and concept options were envelope with high-performing glass
Cost $11.4 M
created and discussed with the owner maximizes natural daylight while
Date April 2010
before final recommendations were reducing energy costs
presented. • Focused on indoor air quality and Services
sustainable design concepts to create a Master Planning
Recommendations in the strategic master
healthy environment for patients and staff
facility plan included renovation, relocation
or new construction for vital areas such
as clinical, physician and administrative
services. The plan is to be implemented
in two phases. Phase one includes
construction and renovation for clinical and
mechanical spaces. Phase two calls for
the construction of a new medical office
building for housing administrative support.
LEED Facts
for LEED BD+C: New Construction
(v2.2)

Certification awarded May 2010

Certified 30

Sustainable sites 6/14


Water efficiency 4/5
Energy & atmosphere 5/17
Material & resources 4/13
Indoor environmental quality 7/15
Innovation 4/5
BP (British Petroleum)
Cantera III Building Renovation
BSA LifeStructures provided systems engineering and commissioning services for the Cantera III
project, a five-story building designed, constructed and commissioned in accordance with the LEED
Building Certification program.

The unique requirements of LEED Key Features Project Details


certification provided additional challenges
that required special consideration and • Selected as one of 50 pilot projects Warrenville, Illinois
planning. to develop the standards for LEED CI
(Commercial Interiors) Size 170,000 sf
The scope of the commissioning included • Infrastructure elements were creatively Cost $25 M
all mechanical and electrical systems with repurposed for use in other buildings Date March 2003
a focus on systems operational training.
• Chilled water system provides higher Services
The project had the additional complexity
efficiency and better occupant comfort Systems Engineering and Commissioning
of integrating new chilled water, steam and
(improved temperature and humidity
electrical distribution equipment with the
control)
existing systems. As part of the scope the
original systems were “recommissioned”
to verify proper system operation of the
systems at project completion.
LEED Facts
for LEED ID+C: Commercial Interiors
(v1.0 pilot)

Certification awarded Feb 2005

Certified 25

Sustainable sites 3
Water efficiency 0
Energy & atmosphere 9
Material & resources 5
Indoor environmental quality 7
Innovation 1
Purdue University
Lyles-Porter Hall
Lyles-Porter Hall blends academic, research and clinic space in an interdisciplinary facility that
promotes interprofessional collaboration. The neighborhood design concept seamlessly blends
six previously isolated programs providing unique identities while improving joint-synergies and
operational efficiencies.

This Health and Human Sciences Building Key Features Project Details
brings together the Speech, Language
and Hearing Sciences Department, School • 185K BTU / yr / sf, 15% below ASHRAE West Lafayette, Indiana
of Nursing and the Indiana University 90.1 requirement
Size 112,000 sf (new)
School of Medicine-Lafayette in one • Dedicated heat recovery chiller
Cost $31 M
interdisciplinary facility. The combination • Dedicated outdoor air system
of academic, research and clinic space Date April 2014
• Chilled beam technology
encourages interprofessional collaboration Services
• Total heat recovery wheel technology
and reflects current healthcare practice with Architectural Design
a team-based approach to wellness. • Occupied / unoccupied zoning
Engineering
• Humidity controlled hearing booths
• Lighting control including daylight
harvesting
• Arc flash isolation electrical room
• Occupancy sensors for lighting control
throughout
• LED Lighting in specific areas
LYLES-PORTER HALL
THREE-GLOBES CERTIFIED

2014
CERTIFIED BY
THE GREEN BUILDING INITIATIVE FOR
ENVIRONMENTAL & ENERGY EFFICIENCY
Purdue University
Drug Discovery Building
Purdue University’s scientists are making drug discovery breakthroughs at the atomic and molecular
levels. The new Drug Discovery Building provides the environmentally-controlled spaces needed to
successfully develop new drugs, in particular, control of temperature, humidity and growth of molds.
It is designed to encourage interdisciplinary collaboration and ground-breaking research in chemistry
and biochemistry.

A research laboratory core is surrounded Key Features Project Details


by offices and support spaces. This
separates the lab zone from the office zone • 131K BTU / yr / sf, 10% below ASHRAE West Lafayette, Indiana
while still maximizing convenience, comfort 90.1 requirement (estimated)
Size 65,400 sf (new)
and safety for the users. Windows into the • Runaround heat recovery system
Cost $21.0 M
labs maintain a visual connection among • Chilled beam technology
areas and enhance daylighting. All of the Date March 2014
• Dedicated heat recovery chiller
labs are designed to be either continuous Services
• Wind tunnel model exhaust analysis
and connected or separated into smaller
• Computational fluid dynamics laboratory Architectural Design
clusters, creating flexibility and adaptability.
air flow study Laboratory Planning
Spaces also include an imaging center
(NMR) with support space for animal • Optimized exhaust velocity system Mechanical, Electrical and Plumbing
housing, microscopy and tissue culture Engineering
• Arc flash isolation electrical room
research. • Occupancy sensors for lighting control
throughout
• LED lighting in specific areas
DRUG DISCOVERY FACILITY
THREE-GLOBES CERTIFIED

2014
CERTIFIED BY
THE GREEN BUILDING INITIATIVE FOR
ENVIRONMENTAL & ENERGY EFFICIENCY
Lakeland HealthCare
Marie Yeager Cancer Center
The Marie Yeager Cancer Center provides a soothing environment designed to promote healing. The
design incorporates elements previously shown to positively impact clinical outcomes at Lakeland,
including a healing garden, natural light, artwork and a rooftop garden that collectively creates a
soothing and stress free experience.

Oncology services at the Marie Yeager Key Features Project Details


Cancer Center include diagnostic imaging,
outpatient surgery, laboratory services, a • Healing garden St. Joseph, Michigan
resource library, infusion services, physical • Rooftop garden
Size 30,000 sf (new)
therapy, lymphedema services, hospice, • Soothing artwork
Cost $8.4 M
and an on-site boutique for current and • Abundance of natural light and
former cancer patients. In an effort to Date June 2011
connections to nature
enhance collaboration, shared space is
provided for community organizations such
as the American Cancer Society.

Certification Pending
for LEED BD+C: New Construction
(v2009)
Eskenazi Health
Fifth Third Faculty Office Building
The Eskenazi Health Faculty Office Building sits on the Eskenazi Health campus in downtown
Indianapolis. The office building houses hospital support functions, including office space for Purdue
University’s School of Pharmacy and the Indiana University School of Medicine.

BSA LifeStructures provided MEP Key Features Project Details


engineering for the faculty office building.
• 21% energy savings over ASHRAE 90.1- Indianapolis, Indiana
The office building, along with an 11-story 2004
hospital tower and ambulatory care Size 297,000 sf (new)
• Variable flow heating and cooling water
building, enable Eskenazi’s physicians Cost $62.8 M
systems
and staff to be consolidated in one modern Date November 2013
• Water side heat recovery loops in AHUs
campus instead of being scattered
throughout other buildings in downtown • CO2 monitored and controlled outdoor
Indianapolis. The building is a state-of- air delivery
the-art facility built for staff and physician
convenience with a focus on increased Certification Pending
efficiency. The building complements the
architectural character of the campus’ other for LEED BD+C: New Construction
(v2.2)
buildings and bolsters the Eskenazi Health
brand.

The campus is seeking LEED Silver


Eskenazi Health
Sidney & Lois Eskenazi Hospital
Eskenazi Health, formerly Wishard Health Services, is one of the nation’s top five safety net hospitals
serving residents of central Indiana. This teaching facility is a Level I trauma center and serves
as the state’s regional Burn Center. A complete hospital replacement of all campus facilities was
accomplished in December 2013. The entire campus facility is seeking LEED Silver.

BSA LifeStructures provided operational Key Features Project Details


and facility planning for the hospital. The
campus features approximately 1.3 million • One-of-a-kind rooftop skyfarm grows Indianapolis, Indiana
square feet of facilities, including a 315- 3,000 pounds of food for patients
Size 828,000 sf (new)
bed inpatient hospital, 19 operating rooms • 70% of construction waste was diverted
from the waste stream Cost $364.5 M
and four interventional labs, 12 labor and
delivery rooms, a 90-bed emergency Date September 2012
• 40% reduction in water usage through
department with a 20-bed clinical decision low-flow faucets and showers, dual flush
unit and an ambulatory clinic with more toilet handles and waterless urinals
than 200 exam rooms. • Rainwater collected from the roof is used
in toilets
The project also includes a faculty and
• Solar reflective white coating on roof
Certification Pending
research facility housing offices for
Eskenazi Health’s physicians, 99 percent reflects up to 90% of sunlight for LEED BD+C: New Construction
(v2.2)
of whom are on the IU School of Medicine • 250 bicycle storage units
Faculty, as well as administrative offices
and research areas. A campus Master
Plan was completed by BSA LS in 2002
which informed and preceded planning and
design by HOK architects.
University of Illinois at Urbana-
Champaign, Everitt Lab Renovation
BSA LifeStructures is providing architecture, laboratory planning and design, MEP engineering,
interior design and landscape design for this complex renovation project that transforms the historic
four-story Everitt Electrical and Computing Engineering Laboratory into the new home of the
Department of Bioengineering.

Everitt Laboratory will house seven Key Features Project Details


classrooms and six classroom labs for
undergraduate and graduate students. • Complex renovation reuses existing Champaign, Illinois
The facility will have space to support building systems
Size 226,527 sf
the research efforts of 14 investigative • Adhesives, sealants, paints, coatings
and carpet systems contain low levels of Cost $35.3 M
teams and six computational teams.
Volatile Organic Compounds (VOCs) Date June 2018
Office space is provided for departmental
administration, all departmental faculty and • Mechanical systems use energy recovery
teaching staff. Office space is also included where possible including Total Energy
for postdoctoral and graduate students recovery Wheels, Heat Pipes and an
associated with the 20 investigative Energy recovery Chiller
and computational teams located in • Enhanced commissioning
Certification Pending
the building, along with conference and for LEED BD+C: New Construction
• Regional materials used throughout
support spaces to facilitate interaction and (v2009)
collaboration. • Recycled materials used throughout
Indiana University
Hodge Hall Undergraduate Center
The Hodge Hall Undergraduate Center addition and renovation creates an experiential learning
environment for student collaboration. Maximizing space utilization and efficiency, floors were
extended to create multipurpose and spacious areas for students to focus, relax, study and interact.
Tiered classrooms promote team-based work.

The renovation allows the university to Key Features Project Details


accommodate an increasing student
enrollment, while sustaining a high level • 65K BTU / yr / sf, 24% below ASHRAE Bloomington, Indiana
of academic excellence. A distinctive new 90.1 requirement
Size 83,520 sf (new)
entry welcomes visitors and provides an • Dedicated outside air units with desiccant
wheel dehumidification technology and 12,950 sf (renovated)
identity for the undergraduate school.
Spacious multipurpose rooms provide heat wheel energy recovery Cost $25.2 M
lounge space and areas for study. The • Chilled beam technology Date June 2014
rooms can also be used for small lectures, • Water side heat recovery economizer
special events and receptions. High
• Classroom reheat optimization control
ceilings, wood paneling and beams are
reflective of the university’s traditional Certification Pending
architecture. for LEED BD+C: New Construction
(v2.2)
The project is pursuing LEED Silver.
University of Notre Dame
McCourtney Hall
This new Multidisciplinary Research Building brings together the College of Science and College
of Engineering in an open and collaborative lab environment with a focus on Drug Discovery. The
project is seeking LEED Silver.

In addition to anchoring the new quads Key Features Project Details


the building will begin the formation of
an internal courtyard shared by future • Runaround heat recovery system Notre Dame, Indiana
research buildings. • Heat recovery chillers
Size 200,000 sf (new)
• LED lighting with integrated lighting
Clustering offices and research centers Cost $60 M
control
in the knuckle fosters a collaborative Date Est. August 2016
neighborhood of interdisciplinary teams.
The research labs are modular and
adaptable to accommodate evolving
science and changing team sizes.

Labs zones accommodate hood intensive


Certification Pending
or less hood intensive research. The lab for LEED BD+C: New Construction
diagram consists of two bays of modular (v2009)
benches and hoods. An adjacent bay of
flex zone can accommodate lab, support,
or team space. Team space is adjacent to
the flex zone and is adaptable to varied
team sizes.
Community Hospital South
Campus Expansion
BSA LifeStructures provided energy modeling services to support the architecture and MEP design
teams. Model results were used to aid in selection of energy conservation measures (ECMs) that met
the owner’s economic criteria and helped the design achieve an Energy Star rating of 75 by reducing
the existing site energy consumption by more than 30%.

The main goals of the project were to Key Features Project Details
improve the sustainable performance of
the hospital in conjunction with the Green • Energy Star rating of 75 Indianapolis, Indiana
Guide for Healthcare and improve patient • High efficiency hot water boilers
Size 197,000 sf (new)
comfort with an environmentally friendly • Heat recovery chiller transfers byproduct 116,000 sf (renovated)
emphasis. heat from the cooling process Cost $89.6 M
In order to achieve a sustainable design • Enthalpy utilized to recover energy Date July 2010
and an Energy Star listing, an integrated from the building exhaust system to
design process focused on alignment precondition the building outside air
of systems to the hospital program, • Sustainable engineering systems
efficiency of production, recovery of by decrease energy consumption more than
product energy, and utilization of advanced 30%
technology. • LED lighting reduces electrical lighting
energy consumption by 20% over
fluorescent lighting
• Occupancy sensors in support areas

PENDING
SSM Health
Good Samaritan Hospital
BSA LifeStructures provided energy modeling services for a new replacement hospital facility with
central plant facilities. Results from model were used to help the design achieve an Energy Star rating
of 75.

Good Samaritan Regional Health Center Key Features Project Details


and the project team have evaluated the
success of the project based, in part, on • Winter air and water economizer that Mount Vernon, Illinois
how well the building would perform across recovers heat from data center and
internal heat producing areas Size 380,000 sf
economic and sustainable benchmarks.
Cost $145 M
The facility has met and exceeded the • Low flow variable flow chilled water
Date October 2012
performance benchmarks that the project system
team established. • High-efficiency chilled water coils * project on hold due to financial pressures
• Cooling coil condensate recovery system in 2009
The facility’s projected energy intensity
is 184,790 BTU / sf / yr. The design team • Variable speed high-efficiency chillers
is also analyzing utility bills to ensure • Variable speed cooling tower fans
the building stays within their projections • Low temperature and low variable flow
for energy use. The project team uses a heating water system
web-based building management system
• Heat recovery chillers used for summer
to monitor the building and fine tune the
heating requirements
systems for energy savings.
• Condensing hot water boilers
• Low velocity custom air handling units for
energy efficiency PENDING
• High efficiency instantaneous domestic
hot water heaters

Você também pode gostar