Escolar Documentos
Profissional Documentos
Cultura Documentos
Relatório da aula 3
Considerando 25 quadros por segundo e 525 linhas por quadro na tela, temos 13125
linhas de varredura por segundo, isto é, cada linha precisa ser percorrida em 76 us.
Considerando 700 colunas por quadro, temos ainda que cada ponto da tela deve ser
percorrido em 108 ns.
RS Encoder: Reed solomon codes are basically used for providing FEC(Forward
Error Correction) to the received erroneous blocks. RS encoder is used at the
transmit end by which redundancy bytes are added to the input data to be
transmitted. RS decoder is used at the receiver to correct the errors occured on the
way by use of redundant information. RS codes are systematic linear block code. It is
a block code because the code is put together by splitting the original message into
fixed length blocks.
Fonte:
http://www.rfwireless-world.com/source-code/MATLAB/Reed-solomon-Encoder-matla
b-code.html
The Initial conditions parameter indicates the values that fill each shift register at the
beginning of the simulation (except for the first shift register, which has zero delay). If
Initial conditions is a scalar, then its value fills all shift registers except the first; if
Initial conditions is a column vector whose length is the Rows of shift registers
parameter, then each entry fills the corresponding shift register. The value of the first
element of the Initial conditions parameter is unimportant, since the first shift register
has zero delay.
This block accepts a scalar or column vector input signal, which can be real or
complex. The output signal has the same sample time as the input signal.
The block can accept the data types int8, uint8, int16, uint16, int32, uint32, boolean,
single, double, and fixed-point. The data type of this output will be the same as that
of the input signal.
Fonte:
https://en.wikipedia.org/wiki/Convolutional_code#Punctured_convolutional_codes
Fonte: http://www.teleco.com.br/tutoriais/tutorialtvdigital/pagina_2.asp
Integer to bit converter: The Integer to Bit Converter block maps each integer in the
input vector to a group of bits in the output vector.
Errror Rate Calculation: The Error Rate Calculation block compares input data from a
transmitter with input data from a receiver. It calculates the error rate as a running
statistic, by dividing the total number of unequal pairs of data elements by the total
number of input data elements from one source. Use this block to compute either
symbol or bit error rate, because it does not consider the magnitude of the difference
between input data elements. If the inputs are bits, then the block computes the bit
error rate. If the inputs are symbols, then it computes the symbol error rate.
AWGN Channel: An AWGN channel adds white Gaussian noise to the signal that
passes through it.
Fonte: Maurice Gagnaire. Broadband Local Loops for High-speed Internet Access.
Fonte: https://slideplayer.com/slide/6340781/
O codificador de fonte converte uma sequência de símbolos de informação em
uma sequência de símbolos codificados. Uma transmissão eficiente consiste na
representação de uma sequência de símbolos da fonte em uma sequência
binária usando o menor número de bits possível, que possa atender a
exploração de todas probabilidades necessárias. Ainda no codificador de fonte,
há a possibilidade de manipulação criptográfica que permite a transmissão de
informação de forma sigilosa e torna a informação incompreensível àqueles
destinatários não autorizados a recebê-la (PIMENTEL, 2007).
Fonte: http://www.teleco.com.br/tutoriais/tutorialcrc1/pagina_3.asp
No codificador de canal a informação codificada anteriormente no codificador de
fonte é fracionada de acordo com o com o comprimento limitante do pacote de
bits, que varia de sistema para sistema, em seguida, através de códigos
detectores ou corretores de erros, é introduzida uma redundância de maneira
controlada nesta sequência de símbolos à sua saída, de tal forma que o
decodificador de canal usará esta redundância para controlar erros oriundos dos
efeitos de ruídos e distorções causados durante a passagem do sinal transmitido
pelo canal de comunicações. O objetivo principal do codificador do canal é
garantir a integridade da mensagem e aumentar confiabilidade da transmissão
(JEZENSKY, 2004).
Fonte: http://www.teleco.com.br/tutoriais/tutorialcrc1/pagina_3.asp