Escolar Documentos
Profissional Documentos
Cultura Documentos
Introduction
Through science, we are able to generated ideas that could change the way of life of us
people. Science is developed on research and developments from technological projects down to
scientific invention of life advances. Here, in the Philippines, the Department of Science and
Technology (DOST) has been the agency who manages and regulates the researches and
developments to science and technology. According to its information website, the agency’s
Mission
“DOST shall be the direction provider, leader and coordinator of the country's
scientific and technological efforts, ensuring that these are geared and utilized in
areas of maximum economic and social benefits for the people”. (Sec. 4, E.O. 128)
Vision
solutions that empower Filipinos to attain higher productivity and better quality of
life”.
Likewise, when it comes to disaster, the National Disaster Risk Reduction Management
Council has been serving the Filipinos on disaster preparedness programs, disaster operations
and rehabilitation efforts undertaken by the Philippines government and the private sector.
NDRRMC acts as the top coordinator of all disaster management and the highest allocator of
Page | 1
Objective
integrated, multi-sector and community based approach and strategies for the
With the presence of these two government agencies, the researchers seek to
revolutionize the responses when it comes to disaster with the help of advanced technology. In
line of DOST’s Projects, advances the use of cutting edge technologies and recommend
help prevent these, the researchers admires to develop a product that could help Filipinos be
ready on disaster preparedness. Also, along with the government agencies, the researchers are
open for other partnerships and stakeholders who would reach a hand in helping us to realize this
project.
II. Purpose
On November 8, 2013, the City of Tacloban was badly hit by typhoon Yolanda
(internationally named, Haiyan) which led to cut down electricity, cell sites, and power outage
for many months and even a year or so. As one of the victims of such typhoon, it was really a
challenge for living without electricity in which for our generations nowadays, we are technically
dependent of such use for power sources which guarantees light, battery life for cellular phones
and gadgets, and even internet. We all use these things for contact and information and at those
Page | 2
times we were helpless, nothing to do but wait for news from people outside as the sun goes by
day by day. When the night falls, the moon is the main light with the support of flashlights.
As we notice, power technology in energy aspects, has been developing sustainably and
one of them is the solar energy. During those times, when electricity was still a myth amidst the
destruction, aside from generators, solar panels became a rampant market on side walk stores,
and other forms of stores at those times because aside from it is affordable, it very light handed
and very easy to use. Solar is a very efficient source of energy especially at that time because
with the suns’ heat, you can already absorb it with the use of panels and later on be converted as
an energy source and where, the sun is always there giving heat to whatever and wherever it
directs to and it gives renewable energy source to give light for household consumptions and
other establishments.
Along the solar panels, the power bank also came to arise from the market, as well as
convenient, portable and easy to use. It was a hit especially to us teenagers. It will save us from
falling in long lines to charging stations and avoid wasting time of waiting. With the use of such
device, there were already extra times, such as tuning in on a radio to know the whereabouts and
actions being done by our government for the rehabilitation of the city, while doing household
chores, which was really important because a lot of debris were stump upon on the community
With these, the researchers put on a purpose that these could be necessity when
calamities occur, which can also be economical for those who loves travelling from rural areas
doing some hiking, cycling, and camping. Thus the researchers, a group of Industrial
Page | 3
Engineering students in partnership with Electrical Engineering student have come up an idea of
a product that has all its features. The product is a solar power bank with a built-in radio and
flashlight. We believe that this idea has the need and could be a development on technology
All our expensive and portable devices are only as good as their battery life. All our
modern consumer devices, such as mobile phones, tablets and others gadgets are useless without
power and it defeats the object of their use if you have to keep on plugging them into the mains.
If you wish to remain mobile with your mobile device, the only solution in the foreseeable
future is a backup battery. This is particularly important in the case of mobile phones able to do
more or less what a PC can. Nowadays, it’s very essential that you have emergency kit that
contains flashlight, radio, medicine, clothes and other important things that’s needed for
emergency situations and calamities. Because of this we decided innovate an all in one gadget
and we called it Multi-Purpose Solar Power Bank. Through the help of Multi-Purpose Solar
Power Bank will store power and let you charge your other devices on the go, when needed.
Multi-Purpose Solar Power Bank works the same way, just instead of electricity it uses the sun
(through the built-in solar panels) to charge itself. This product has flashlight and radio that are
The device is purely generated by solar energy and thus it can grasp power anywhere and
anytime as long as it is daylight. The product is from main compartments of a power bank, solar
Page | 4
panel, flashlight, and radio, ergonomically designed to be convenient, portable, and easy to use
type of product. Also, the product produces energy that could last for two-three weeks of stored
energy. We want to raise this product to give awareness to the people of Tacloban City or the
whole nation for safety and precautions to abide when calamities will arise. Our targets are those
underprivileged families living on rural areas commonly on coastal premises or near the bodies
of water.
A. Objectives
The researchers’ objectives to reach in order to fulfill the purpose of the study:
1. To help these people provide a product that is compact and can be used even
2. A product that could help families and communities to ready whenever fortuitous
3. And a device that could assist people to sustain light and power whenever there in
B. Methodology
Inputs
Tools:
Page | 5
● Wire
● Glue gun
Materials:
MATERIALS SPECIFICATION
- 4 volts
Flashlight - 1.5 x 5 inch
- 5 watts
Solar Panel - 4 x 6 inch
Switch - 2 pieces
Output
Top View
Page | 6
Front View
Page | 7
Perspective View
Page | 8
Figure 1
SCHEMATIC DIAGRAM
Page | 9
Table 1
PROJECT TIMELINE
September October
2n
1st 3rd 4th 1st 2nd
d
3rd
Activity W W W W W
W W
e e e e e
e ee
e e e e e
e k
k k k k k
k
Idea Generation
- Brainstorming of ideas good for new product
development
Idea Screening
- Generated ideas will be screen on the basis of viable
resources such as financing, knowledge, skills, and
the feasibility of the product and come up a final
product
Concept Development
- The new product is conceptualized. Basically,
knowing the basic features of the product
Product Analysis
- Identification of the specifications, bill of materials,
and the process flow chart of the product
Product Design
- Designing and engineering a prototype of the product
Test of Product
- Evaluation of the product whether if it met our
concept
Page | 10
Figure 2
MULTI-PURPOSE SOLAR POWER BANK PROCESS
1. Preparation
2. Parts Inspection
Page | 11
- The materials that collected is being tested if it is compatible with each other, it’s also
3. Assembly of Parts
4. Wiring
-One of the most important steps in the process. In this step wiring connections are attached
5. Partial Testing
6. Securing of Connections
-If the connected wires are successful, it is now being tap up with an electrical tape.
7. Final Testing
-All the connections are lastly being inspected and tested to approve as a conforming unit.
8. Packaging
-The product’s electrical system is attached on a protective casing and sealed properly.
C. Action Plan
disaster. As a pre-operation plan, the researchers stimulated an action plan to test the
1. Give free sample trial of the device to local community living near and along the
coastal barangays of Tacloban City with the help of the barangay officials and
Page | 12
hopefully by some organization also. The target quantity is around 500 devices for
500 households.
2. The researchers will educate the respondents on how to use the device properly. The
device is only a free trial; therefore it is only for a limited time, for research purposes.
3. A survey is conducted upon the satisfaction rate and the product adoption process of
the respondents.
4. Through positive response and comments of the said product are improved by an
5. We can introduce the product into the market for commercialization in partnership
D. Marketing Mix
1. Product
Multi-Propose Solar Power Bank the use of the product is to ensure the needs of
2. Price
The product is not after on a high profit but as long as we can overcome all the
expenses help and satisfied the needs and wants of the customer.
3. Promotion
The target markets of Multi-Purpose Solar Power Bank are the teenagers,
travellers, and even adults. To introduce this product to the market world; First, we
will give samples then display it on crowded place where people will be the able to
Page | 13
4. Place
Multi-Purpose Solar Power Bank will be introduce first to the local place located
here in Tacloban City especially those far-flung areas that are hit by frequently
calamity.
The product is very economical especially nowadays us people are very technology
dependent. Without technology, we find it already hard to adapt simplicity of living. From this,
we humbly ask for assistance for upon the realization of our concept. We believe this product
can go a long way. With these, funding assistance would be beneficial for the realization of this
project.
Table 2
BREAKDOWN EXPENSES FOR RAW MATERIALS
TOTAL
QUANTITY UNIT ARTICLES UNIT PRICE
AMOUNTT
1 PC POWER SOURCE ₱ 150.00 ₱ 100.00
1 PC FLASHLIGHT ₱ 215.00 ₱ 215.00
1 PC RADIO ₱ 220.00 ₱ 220.00
1 PC CASE ₱ 120.00 ₱ 120.00
Page | 14
2 PC SWITCH ₱ 100.00 ₱ 50.00
2 METERS CABLE TIE ₱ 30.00 ₱ 30.00
1 PACK UTP CABLE ₱ 30.00 ₱ 20.00
1 METER SOLDERING LED ₱ 145.00 ₱ 145.00
TOTAL ₱ 900.00
Table 3
COST-PLUS PRICING
Page | 15
Expenses
Page | 16
Divide 500 (Total Product Produce) ₱ 1, 500.00
Along with the aforementioned costs, a production space, utilities, machine and equipment
are also concerned with such project. A partnership with an electronics company that specializes
in line with this product could assist us in the mass production. With pursuance, once introduced
to the market, the product is sold at ₱ 1, 800 and the generated profit will be the stepping stone of
investments of the projects own land, building, machine and equipments, utilities, and even
labor.
V. Summary
Multi-Purpose Solar Power Bank is innovated to help the people especially to those who
don’t have enough supply of electricity. With its radio and flashlight will be useful and helpful
during emergencies situations. Less worries and cost because Multi-Purpose Solar Power Bank
gets it energy from the sun. Using this product will help our environment to minimize pollution
What would you say? If you wish to contact us and for more inquiries about the project,
you can call or text Mr. Francis Adrian P. Polido at 0917-327-8705 (Globe) or you can email us
to francisadrianpolido@yahoo.com anytime.
Page | 17
It would be an honor to help our fellow Taclobanons be ready for every risks they will
encounter. You have got to love the sunlight. It is one of our major sources of power. Thank You
and Godspeed.
Page | 18
Product Developer’s Profile
Page | 19
Page | 20