Escolar Documentos
Profissional Documentos
Cultura Documentos
Follow these steps to install your AXIS 205 on your local network (LAN):
1. Familiarize yourself with the AXIS 205 Network Camera - (this page)
2. Connect the camera - Hardware Installation, on page 2
3. See live video - One-click Installation, on page 3
- alternatively -
See live video - Manual Installation using AXIS IP Utility, on page 4
For additional information please refer to the Axis Web site at www.axis.com
Package Contents:
Printed Material
AXIS 205 Network Camera Power adapter Stand + 3 mounting screws AXIS 205 Network Camera
Ready assembled with lock Country-specific. Please Stand and extension section Quick Installation Guide
washer, swivel joint and lock ensure that the correct ready assembled. Axis Warranty Document
ring adapter is used
AXIS 205 Quick Installation Guide Page 2 of 6
Hardware Installation
Mounting on a Horizontal Surface
1. Attach the camera to the stand Lock Ring
Important!
The AXIS 205 is designed for indoor use only, and must always be positioned where it is not exposed to
direct sunlight or strong halogen light. Exposure to direct sunlight or halogen light may cause perma-
nent damage to the image sensor in the AXIS 205.
Damage as a result of exposure to strong light is not covered by the Axis warranty.
One-click Installation
Requirements:
Computer AXIS 205
on a LAN Network Camera Broadband router providing
automatic IP addressing Internet
Broadband Modem
• AXIS Internet Dynamic DNS Service is free of charge and is designed to supply you with a static name (DNS name) for
your product instead of a dynamic IP address. More information about AXIS Internet Dynamic DNS Service is available at
www.axiscam.net
• Please note that this procedure will send the IP address, firmware version, product type and serial number of the AXIS
205 to the Axis Internet Dynamic DNS Service. No personal information is transferred.
• To remove the DNS name and un-register from the Axis Internet Dynamic DNS Service, open the Setup pages in the AXIS
205, click TCP/IP, Services and check the Remove currently registered DNS name checkbox under the AXIS Internet
Dynamic DNS.
6. Follow the on-screen instructions in the AXIS Internet Dynamic DNS Service.
7. Go to Accessing the AXIS 205, on page 5 for instructions on how to set the password
for the AXIS 205.
Note:
If this installation was not successful, try Manual Installation using AXIS IP Utility, on page 4
AXIS 205 Quick Installation Guide Page 4 of 6
Computer
on a LAN
Hub/Switch
AXIS IP Utility
AXIS IP Utility is a Windows software application that installs the AXIS 205 Network Camera to your local network
using a static IP address.
• Download the AXIS IP Utility software to your computer, free of charge from the Support pages at
http://www.axis.com/techsup/software
• Double-click the setup.exe file and follow the on-screen instructions to install the software on your computer.
AXIS 205 Network Camera Quick Installation Guide Rev. 1.0 Part no: 21121
October 2003 Copyright © Axis Communications AB, 2003