Hardwired outputs The following parameters define the input CAN signal and activation condition for the hardwired bodybuilder outputs.
Customer Parameter Signal ID Additional
parameter explanation information code
1-260 Output 1, 0-31 Refer to the CAN
pin D31 signal table below 1-261 Output 1, Value dependent on condition the selected signal 1-262 Output 2, 0-31 Refer to the CAN pin D32 signal table below 1-263 Output 2, Value dependent on condition the selected signal 1-264 Output 3, 0-31 Refer to the CAN pin D23 signal table below 1-265 Output 3, Value dependent on condition the selected signal 1-266 Output 4, 0-31 Refer to the CAN pin D34 signal table below 1-267 Output 4, Value dependent on condition the selected signal
CAN signal table
The following CAN signals can be selected as activation condition for the hardwired bodybuilder outputs.
Signal Applicability Activation Range Function Additional
ID Condition information
0 Not used Hardwired
output disabled 1 > 0 - 125 Vehicle Hysteresis km/h speed on switch off = 3 km/h 2 Park brake 3 Clutch open 4 < 0 - 100 % Fuel level Hysteresis on switch off =5% 5 Brake pedal 6 > 0 - 3000 Engine Hysteresis rpm speed on switch off = 25 rpm 7 Accelerator pedal idle status 8 > 0 - 100 % Accelerator Hysteresis pedal on switch off position =5% 9 < 0 - +125 Engine Hysteresis Celsius coolant on switch off temperature = 2 degree 10 Allison or Drive line AS-tronic disengaged 11 Allison Torque convertor lock-up 12 Manual Transmission Transmission gearbox neutral switched into position neutral 12 Allison or Transmission Transmission AS-tronic neutral switched into position neutral 13 Manual Reverse Transmission gearbox current gear switched into reverse gear 13 Allison Reverse Transmission current gear switched into reverse gear 13 AS-tronic Reverse Transmission current gear switched into reverse gear 14 Allison or dependant Forward Transmission AS-tronic on current gear switched into gearbox a forward gear 15 Allison or Selected Neutral AS-tronic gear neutral selected by the driver, may be different from the actual gear 16 Allison or Selected Reverse AS-tronic gear reverse selected by the driver, may be different from the actual gear 17 Allison or Selected Forward AS-tronic gear forward selected by the driver, may be different from the actual gear 18 Cabin unlocked 19 Air pressure circuit 1 red warning 20 Air pressure circuit 2 red warning 21 Engine oil pressure red warning 22 Engine oil temperature red warning 23 Allison or Transmission AS-tronic oil temperature red warning 24 Engine coolant temperature red warning 25 Engine coolant temperature yellow warning 26 Red warning active 27 Fuel level warning 28 Driver door open 29 Co-driver door open 30 < -30 ... +60 Ambient Hysteresis temperature on switch off = 1 degree