Escolar Documentos
Profissional Documentos
Cultura Documentos
BENEFITS
HOW TO USE
MAIN APPLICATIONS
• Before to connect, clean the mating surface of the couplings to avoid dirt
inclusion in the circuit.
• To connect pull back the sleeve of the female coupling, align the female with
the male coupling and push one into the other until both halves are fully
connected and release the sleeve. Agriculture Oil&Gas Industry High Pressure Cooling
• To disconnect push back the sleeve of the female coupling, pull out the
mating half.
Refrigeration Earth Moving Vehicles Hydraulic Equipment Chemical & Food Industry
info@hidrafluid.es
976 24 32 10
BIRSERIES
PERFORMANCES
Size Series/Size Max. flow suggested Connect force Disconnect force Spillage*
Inch mm (ISO)
l/min GPM N lbf N lbf ml
1/4 6,3 BIR14 12 3,18 60 13,50 25 5,63 0,70
3/8 10,0 BIR38 46 12,19 90 20,25 30 6,75 1,20
1/2 12,5 BIR12 90 23,85 70 15,75 55 12,38 2,10
3/4 20,0 BIR34 148 39,22 140 31,50 55 12,38 5,20
1 25,0 BIR100 200 53,00 190 42,75 55 12,38 9,00
1-1/4 31,5 BIR114 378 100,17 230 51,75 55 12,38 27,00
1-1/2 40 BIR112 750 198,75 250 56,25 70 13,75 49,00
2 50 BIR200 1000 265,00 270 60.75 60 13,50 75,00
*Spillage is an indicative value of the fluid loss during disconnection Temperature range:
(according to ISO norm test method) Seals in NBR (Nitrile) : from -20 °C to +100 °C ( from -4 °F to +212 °F)
Upon request seals in VITON® : from -15°C to +180°C ( from +5 °F to +356 °F).
Different possible configurations: Please read carefully “instruction and warning” for proper selection of the products.
PC version, special valve to connect under residual pressure possible
either on male or on female side.
PL version, free flow (without valve) on both sides.
TIC version, shielded poppet to avoid flow-checking when used with
other connect-under-pressure type couplers.
info@hidrafluid.es
976 24 32 10
BIRSERIES
OVERALL DIMENSIONS
FEMALE MALE
info@hidrafluid.es
976 24 32 10
BIRSERIES
FEMALE MALE
FEMALE MALE
Port description: FEMALE THREAD BSPP (ISO 1179-1) PL version full flow (without valve)
BODY Descriptive Code Item Code ISO PORT (A) Overall Length Length Hex Diameter Diameter Weight
SIZE DN
mm inch mm inch mm inch mm inch mm inch Kg Lbs
F BIR14PL BSP Female 800500018 F 47,1 1,85 C 19,0 0,75 I 22,0 0,87 E 26,0 1,02 0,10 0,21
1/4” 6,3 1/4” G 64,8 2,55
M BIR14PL BSP Male 800500019 D 32,0 1,26 B 19,0 0,75 H 20,8 0,82 J 11,8 0,46 0,03 0,07
F BIR38PL BSP Female 800500022 F 56,1 2,21 C 22,0 0,87 I 24,0 0,94 E 31,0 1,22 0,14 0,32
3/8” 10 3/8” G 76,8 3,02
M BIR38PL BSP Male 800500023 D 38,0 1,50 B 22,0 0,87 H 24,0 0,94 J 17,3 0,68 0,05 0,11
F BIR12PL BSP Female 800500020 F 63,3 2,49 C 27,0 1,06 I 30,0 1,18 E 38,0 1,50 0,25 0,54
1/2” 12,5 1/2” G 86,3 3,40
M BIR12PL BSP Male 800500021 D 44,5 1,75 B 27,0 1,06 H 29,0 1,14 J 20,5 0,81 0,08 0,19
F BIR34PL BSP Female 800500016 F 82,2 3,24 C 38,0 1,50 I 44,0 1,73 E 48,0 1,89 0,49 1,09
3/4” 20 3/4” G 111,1 4,37
M BIR34 PL BSP Male 800500017 D 55,0 2,17 B 36,0 1,42 H 38,5 1,52 J 29,1 1,15 0,21 0,45
F BIR100PL BSP Female 800500024 F 97,1 3,82 C 45,0 1,77 I 52,0 2,05 E 54,0 2,13 0,76 1,68
1” 25 1” G 127,3 5,01
M BIR100PL BSP Male 800500025 D 63,1 2,48 B 41,0 1,61 H 44,8 1,76 J 34,3 1,35 0,28 0,61
info@hidrafluid.es
976 24 32 10
BIRSERIES
FEMALE MALE
TIC version Shielded poppet to eliminate flow-checking when used with connect-under-pressure competitor couplers
BODY Descriptive Code Item Code ISO PORT (A) Overall Length Length Hex Diameter Diameter Weight
SIZE DN
mm inch mm inch mm inch mm inch mm inch Kg Lbs
1/2” M BIR12TIC NPT Male 800501017 12,5 1/2” G 86,3 3,40 D 47,0 1,85 B 27,0 1,06 H 30,0 1,18 J 20,5 0,81 0,08 0,19
info@hidrafluid.es
976 24 32 10
BIRSERIES
SPARE KIT SEAL FOR FEMALE
Protective Cap
Body Size/Description Part Number Material/Color
Plug for Female Cap for Male
1/4” BIR14 815000012 815000013 PVC/Red
3/8” BIR38 815000014 815000015 PVC/Red
1/2” BIR12 815000004 815000005 PVC/Red
3/4” BIR34 815000016 815000017 PVC/Red
1” BIR100 815000018 815000019 PVC/Red
info@hidrafluid.es
976 24 32 10