aise DFFBa3 Design Examples -Loads 27
il] Els
: | General area i] iS
ak
I General oreo ') SIs
L ty} =|§
HL
5.2m x 5.2m zone 2.6m x 2.6m zone
Local pressure factor Local pressure factor
15 2.0
Approximately 72.5 overall length
Figure 2.5 Peak Local Pressure Roof Plan
LC2: LL of 2.25kN/m + 4.5 kN at ridge
(Note that both the dead and live loads are usually input as negative loads in
Microstran because they usually act in the negative direction of the local or global
member axes.)
LC3: Cross Wind Maximum Uplift (CWI — see Figure 2.6): g. = 1.00 kPa
‘Wind direction reduction factor for major framing elements
such as portal frames = 0.95? ASII70.2 13.2.3
‘Area reduction factor for roof only = 0.8 AS1170.2 C1344
‘UDL (windward column) 1.95x0.7%1,00%9.0 = 5.69 KN/m
‘UDL (leeward column) ).952«0.5x1.00%9.0 = 4.06 kN/m
UDL (foof, 0 to 8 m, C,, = 0.95%«0.8x0,9x1.00%9.0= 5.85 kNim
UDL (toof, 8 m to 16m, Cpe 957 0.8%0.5%1.00x9.0 = 3.25 kN/m
.95%0,80,3%1.00%9.0 = 1.95 kNim
12), adopt 1.95 kN/im
UDL (roof, 16 m to 24 m, C,.=
‘UDL (roof, 24 m to 25 m, Che
2000
Tss Le 3500
é 3.28 525]
1.95
5.69
4.08
Figure 2.6 Cross Wind Frame Loads - Maximum Uplift (kN/m)