Escolar Documentos
Profissional Documentos
Cultura Documentos
login| register
1. Select the "Add a New Trunk" link from the upper right hand corner of the "Find and List Trunks" page.
1. Select "SIP Trunk" as the "Trunk type" and "SIP" as the "Device Protocol". Click on the "Next" button.
1. Enter a name in the "Device Name". Valid characters are letters, numbers, dashes, dots (periods), and
underscores. The device name is only used internally in Call Manager so it can be anything you want.
2. Enter a description in the "Description" field.
3. Select a device pool.
4. Enter the IP address of your Asterisk server in the "Destination Address" field.
5. Select "UDP" as the "Outgoing Transport Type".
1 of 8 11/3/2010 9:45 AM
Asterisk Cisco CallManager Integration - voip-info.org http://www.voip-info.org/wiki/view/Asterisk+Cisco+CallManager+Integr...
[callman01]
type=friend
context=incoming
host=10.0.0.1
disallow=all
allow=ulaw
allow=alaw
nat=no
canreinvite=yes
qualify=yes
[callman02]
type=friend
context=incoming
host=10.0.0.2
disallow=all
allow=ulaw
allow=alaw
nat=no
canreinvite=yes
qualify=yes
It is important to use "qualify" in sip.conf since Call Manager does not support registration for SIP trunks.
[macro-dialout-callmanager]
[outgoing]
Configure a dial-peer pointing to your asterisk server on the CCME 3.3 router:
2 of 8 11/3/2010 9:45 AM
Asterisk Cisco CallManager Integration - voip-info.org http://www.voip-info.org/wiki/view/Asterisk+Cisco+CallManager+Integr...
destination-pattern 22..
SIP Protocol
session protocol sipv2
Asterisk Server IP
session target ipv4:10.0.0.1
DTMF tones in RFC2833 for Voicemail integration
dtmf-relay rtp-nte
Allowed codecs
codec g711alaw
And configure asterisk exactly the same as above for Call Manager 3.2, except for voicemail to work add:
dtmfmode=rfc2833
It' very simitar to 4.1, but you must change the UDP protocol of sip in this menu:
Here is the step by step guide for h323 trunk to cisco call manager.
(valid for both for asterisk and trixbox)
3 of 8 11/3/2010 9:45 AM
Asterisk Cisco CallManager Integration - voip-info.org http://www.voip-info.org/wiki/view/Asterisk+Cisco+CallManager+Integr...
cp /etc/asterisk-1.2.8-samples/ooh323.conf /etc/asterisk
amportal stop
amportal start
general
;Define the asetrisk server h323 endpoint
;Whether asterisk should use fast-start and tunneling for H323 connections.
;Default - yes
;faststart=no
;h245tunneling=no
4 of 8 11/3/2010 9:45 AM
Asterisk Cisco CallManager Integration - voip-info.org http://www.voip-info.org/wiki/view/Asterisk+Cisco+CallManager+Integr...
;Type of Service
;Default - none (lowdelay, thoughput, reliability, mincost, none)
;tos=lowdelay
;amaflags = default
;The codecs to be used for all clients.Only ulaw and gsm supported as of now.
;Default - ulaw
; ONLY ulaw, gsm, g729 and g7231 supported as of now
disallow=all ;Note order of disallow/allow is important.
allow=gsm
allow=ulaw
allow=g729
allow=g723
; dtmf mode to be used by default for all clients. Supports rfc2833, q931keypad
; h245alphanumeric, h245signal.
;Default - rfc 2833
dtmfmode=rfc2833
User/peer/friend definitions
; User config options Peer config options
; ------------------ -------------------
; context
; disallow disallow
5 of 8 11/3/2010 9:45 AM
Asterisk Cisco CallManager Integration - voip-info.org http://www.voip-info.org/wiki/view/Asterisk+Cisco+CallManager+Integr...
; allow allow
; accountcode accountcode
; amaflags amaflags
; dtmfmode dtmfmode
; rtptimeout ip
; port
; h323id
; email
; url
; e164
; rtptimeout
mypeer1
type=peer
context=context2
ip=a.b.c.d ; UPDATE with appropriate ip address
port=1720 ; UPDATE with appropriate port
e164=101
myfriend1
type=friend
context=default
ip=10.0.0.82 ; UPDATE with appropriate ip address
port=1820 ; UPDATE with appropriate port
disallow=all
allow=ulaw
e164=12345
rtptimeout=60
dtmfmode=rfc2833
Dial rules:8XXXX
custom dial string:OOH323/$OUTNUM$@10.8.23.5:1720
Route name:h323trunk
Dial rules:8XXXX
OOH323/$OUTNUM$@10.8.23.5:1720
6 of 8 11/3/2010 9:45 AM
Asterisk Cisco CallManager Integration - voip-info.org http://www.voip-info.org/wiki/view/Asterisk+Cisco+CallManager+Integr...
Brothers,
The addons used in trixbox 2.0 and trixbox 1.2.3 are causing the asterisk crash...
saying core dumped...
rpm -e asterisk-addons-1.2.4_1.2.12.1-1.294
rpm -i asterisk-addons-1.2.3-1.219.i386.rpm
amportal stop
amportal start
Please update this page with new information, just login and click on the "Edit" or "Discussion" tab. Get a free login here: Register Thanks! -
support@voip-info.org
Sponsored by:
7 of 8 11/3/2010 9:45 AM
Asterisk Cisco CallManager Integration - voip-info.org http://www.voip-info.org/wiki/view/Asterisk+Cisco+CallManager+Integr...
Search: Search
8 of 8 11/3/2010 9:45 AM