Escolar Documentos
Profissional Documentos
Cultura Documentos
DEPARTMENT OF
COMPUTER SCIENCE AND ENGINEERING
QUESTION BANK
II SEMESTER
Prepared by
QUESTION BANK
SUBJECT : CP5201 NETWORK DESIGN AND TECHNOLOGIES
SEM / YEAR: II/I
3. Analyze the firewall design considerations. What are the BTL4 Analyze
limitations of firewalls? Explain the packet filtering firewall.
4. Evaluate the advantages of shared communication medium. BTL4 Analyze
Highlight the features of different topologies.
UNIT II - WIRELESS NETWORKS
IEEE802.16 and WiMAX – Security – Advanced 802.16 Functionalities – Mobile WiMAX -
802.16e – Network Infrastructure – WLAN – Configuration – Management Operation – Security –
IEEE 802.11e and WMM – QoS – Comparison of WLAN and UMTS – Bluetooth – Protocol Stack
–Security-Profiles.
PART – A
1. Define Best effort service. BTL1 Remember
2. What are the steps required for a SS to connect to the network BTL1 Remember
3. Express the idea of service flow. BTL2 Understand
4. Why does the 802.16 support both FDD and TDD mode of BTL1 Remember
5. operation?
Interpret the theoretical and practical bandwidths offered by an Understand
802.16 systems when used for connecting end users to the Internet. BTL2
6. Differentiate between the coordination scheme used in WLAN Understand
(802.11) and the one used in 802.16 systems? BTL2
7. Prepare the reasons Why do 802.11g networks use the Create
RTS/CTS mechanism? BTL6
8. Show how can a mesh network extend the range of a base station BTL3 Apply
9. What is fast base station switching? BTL1 Remember
10. Illustrate the 2x2 MIMO transmission. BTL3 Apply
11. Differentiate ‘ad hoc’ and ‘BSS’ modes of a WLAN? BTL2 Understand
12. Analyze why are acknowledgment frames used in a WLAN?. BTL4 Analyze
13. Compare and contrast inquiry and paging. BTL4 Analyze
14. Develop a solution to transfer different applications BTL6 Create
simultaneously by the L2CAP protocol.
15. Assess the tasks of link manager. BTL5 Evaluate
16. Compare and contrast authentication and authorization. BTL4 Analyze
17. Analyze Why Bluetooth requires a high number of different BTL5 Evaluate
profiles?
18. List the advantages of integrating both wireless LAN and Remember
bluetooth in a single device? BTL1
19. Demonstrate the WMM priority classes with example. BTL3 Apply
20. What is master slave configuration? BTL1 Remember
PART-B
1. Examine the following frame structures. BTL1 Remember
(i) FDD uplink frame structure. (7)
(ii) TDD frame structure. (6)
2. Examine the following QOS parameters: BTL5 Evaluate
(i) UGS(4)
(ii) Best Effort Service (BS)(4)
(iii) The Real-Time Polling Service (5)
3. Describe the following terms in detail: BTL1 Remember
(i) Connecting to the Network (7)
(ii) Dynamic Frequency Selection.(6)
4. Explain the architecture of WiMax with a neat diagram.(13) BTL1 Remember
5. Demonstrate the principle of MAC management of user data. (13) BTL3 Apply
6. Summarize following the key mechanisms in 802.16e BTL2 Understand
(i) Handover (7)
(ii) Idle state. (6)
7. With a neat diagram explain mobile WiMAX Network BTL4 Analyze
Infrastructure. (13)
8. (i) Examine the Functionalities of a multipurpose WiMAX BTL3 Apply
router device?(7)
(ii) Examine how does WLAN offers QOS.(6)
9. (i)Explain the MAC layer of WLAN.(13) BTL4 Analyze
10. Summarize BTL2 Understand
i) WPA and WPA Personal Mode Authentication.(7)
ii) WPA and WPA2 Enterprise Mode Authentication.(6)
11. Integrate the different modulation schemes in WLAN (13) BTL6 Create
12. Describe the following Bluetooth security mechanisms BTL1 Remember
(i) Pairing up to Bluetooth 2.0 (5)
(ii) Athentication (4)
(iii)Encryption (4)
13. (i) Compare Wireless LAN and UMTS.(7) BTL2 Understand
(ii) Discuss about the Service Discovery Protocol in detail.(6)
14. Analyze Bluetooth protocol stack(13) BTL4 Analyze
PART-C
1. Evaluate why fragmentation and packing is used for transmitting BTL5 Evaluate
IP packets over the 802.16 air interface? Explain the air interface
in detail.
2. (i) What is the basic architectural difference between a WiMAX BTL6 Create
radio network and other radio networks? Rewrite the features of
WiMax.
3. Evaluate how DCF method is used for telephony and video BTL5 Evaluate
streaming applications? What are the challenges and
disadvantages?
4. Analyze the security holes exist in the wired equivalent privacy BTL4 Analyze
(WEP) procedures and how are they solved by WPA and WPA2?
UNIT III - CELLULAR NETWORKS
GSM – Mobility Management and call control – GPRS – Network Elements – Radio Resource
Management – Mobility Management and Session Management – Small Screen Web Browsing over
GPRS and EDGE – MMS over GPRS – UMTS – Channel Structure on the Air Interface – UTRAN –
Core and Radio Network Mobility Management – UMTS Security.
PART – A
1. Define GSM. BTL1 Remember
2. Name the most important components of the GSM Network BTL1 Remember
3. Subsystem
Show how(NSS) and theirauthenticated
is a subscriber tasks in the GSM network? Why BTL3 Apply
is an authentication necessary?
4. Evaluate in what ways is GPRS better than GSM? BTL5 Evaluate
5. What is CAMEL and for which services can it be used? BTL1 Remember
6. Classify the functions of HLR and VLR. BTL3 Apply
7. Differentiate between circuit-switched and packet-switched data BTL2 Understand
8. transmission?
Give the responsibilities of new network elements that have been BTL2 Understand
Define temporary
9. introduced block flow.
with GPRS.s? BTL1 Remember
network.
10. Discuss about the different parts of MMS message. BTL2 Understand
11. Give the advantages of UMTS radio network. BTL2 Understand
12. Analyze the purpose compressed code. BTL4 Analyze
13. Which steps are necessary to digitize a speech signal in a mobile BTL1 Remember
device before it can be sent?
14. Point out the actions performed during an inter-SGSN routing area BTL4 Analyze
update
over the (IRAU)?
GSM air interface?
15. Generalize the tasks performed by the RISC processor and which BTL6 Create
tasks are performed by the DSP in a mobile device?
16. Discriminate between GPRS ready state and the GPRS standby BTL5 Evaluate
state?
17. Show the the Cell-DCH and the Cell-FACH RRC states? BTL3 Apply
18. Point out the advantages of the Enhanced-DCH (E-DCH) concept? BTL4 Analyze
19. Generalize Which options does the Node-B have to schedule the BTL6 Create
.
uplink traffic of different E-DCH mobile devices in a cell?
20. What is SRNS relocation? BTL1 Remember
PART – B
1. (i) Explain The Classic SS-7 Protocol Stack(7) BTL5 Evaluate
(ii) Explain IP-Based SS-7 Protocol Stack (6)
2. Describe the GSM architecture in detail.(13) BTL1 Remember
3. Examine the Network Subsystem in detail. BTL3 Apply
4. (i)Demonstrate briefly about GSM air interface.(7) BTL3 Apply
(ii)Show the structure of GSM burst.(6)
5. Generalize the process of handover in GSM network(13) BTL6 Create
6. Describe in detail about BTL1 Remember
(i) Call Reselection and Location area Update (7)
(ii) The Mobile-Terminated Call(6)
7. Classify the GPRS network elements.(13) BTL4 Analyze
8. (i) Discuss about GPRS state model(7) BTL2 Understand
(ii) Interpret the functions of HLR and VLR in call routing
and roaming?(6)
9. Describe the GPRS interfaces.(13) BTL1 Remember
10. Summarize the Multimedia Messaging Service (MMS) over BTL2 Understand
GPRS.(13)
11. (i)Describe WAP 2.0 in detail. (7) BTL1 Remember
(ii)Examine Small Screen Web Browsing with Network Side
Compression.(6)
12. Summarize the Mobility Management Tasks and session BTL2 Understand
management tasks of GPRS.(13)
13. Discuss about how small screen web browsing is done over GPRS BTL4 Analyze
and Edge.(13)
14. Explain: BTL4 Analyze
(i) The OVSF Code Tree(7)
(ii) UMTS channel structure(6)
PART-C
1. (i)Summarize how a subscriber is authenticated in the GSM BTL5 Evaluate
network? Why is an authentication necessary?(15)
2. Develop a network with all the advanced features of UMTS, GPRS BTL6 Create
and GSM. What are the advantages of the UMTS Radio Network
Compared to GSM?
3. Analyze why is it not necessary to change any settings on the BTL4 Analyze
mobile device for GPRS when roaming abroad?
4. Analyze Which options does the Node-B have to schedule the BTL4 Analyze
uplink traffic of different E-DCH mobile devices in a cell?
UNIT IV - 4G NETWORKS
LTE – Network Architecture and Interfaces – FDD Air Interface and Radio Networks – Scheduling –
Mobility Management and Power Optimization – LTE Security Architecture – Interconnection with
UMTS and GSM – LTE Advanced (3GPPP Release 10) - 4G Networks and Composite Radio
Environment – Protocol Boosters – Hybrid 4G Wireless Networks Protocols – Green Wireless
Networks – Physical Layer and Multiple Access – Channel Modeling for 4G – Introduction to 5G
PART – A
1. What is a resource block (RB)? BTL1 Remember
2. Examine how does a mobile device get access to the physical BTL3 Apply
uplink shared channel?
3. Evaluate how mobility is controlled in RRC Idle state? BTL5 Evaluate
4. Discover the different options for the backhaul connection of the BTL3 Apply
eNode-B.
5. Define CS fallback. BTL1 Remember
6. Classify the Hybrid 4G Wireless Networks Protocols. BTL4 Analyze
7. Develop a solution for interconnecting LTE network with legacy BTL6 Create
core network.
8. Give the purpose of DRX in RRC Connected state. BTL5 Evaluate
9. Analyze Internet-based voice services and network operator-based BTL4 Analyze
voice services.
10. Distinguish between an S1 and an X2 handover BTL2 Understand
11. Distinguish Attach and Default Bearer Activation BTL2 Understand
12. List the activity states of mobility management: BTL1 Remember
13. Differentiate ARQ and HARQ? BTL4 Analyze
14. List the physical parameters for LTE subcarriers. BTL1 Remember
15. Design a schematic model of Mobile Adhoc Network. BTL6 Create
16. Give the importance of Composite radio. BTL2 Understand
17. Tabulate the channel modeling schemes for 4G. BTL1 Remember
18. Identify the issues that are addressed by green wireless networks. BTL1 Remember
19. Interpret protocol boosters BTL2 Understand
20. Show the differences between the tasks for the MME and the tasks BTL3 Apply
of the Serving Gateway.
. PART – B
1. Discuss about LTE Network Architecture and Interfaces(13) BTL2 Understand
2. (i)Illustrate LTE international roaming with home routing (7) BTL3 Apply
(ii) Demonstrate MIMO Transmission (6)
3. Demonstrate how OFDMA used for Downlink transmission .(13) BTL3 Apply
4. Integrate s1 and x2 handover scenarios. Why x2 handover is BTL6 Create
not suitable in all situations?(13)
5. Summarize: BTL5 Evaluate
(i) The protocol for one-hop direct transmission (7)
(ii) Protocols for two-hop direct-transmission mode(6)
6. Discuss about the scheduling schemes in LTE.(13) BTL2 Understand
7. (i) Describe about Composite Radio Environment .(8) BTL1 Remember
(ii) Examine Protocol Boosters in detail(5)
8. Describe the Mobility Management and Power Optimization.(13) BTL1 Remember
9. Compare and contrast the MIMO Channels in Micro- and PicoCell BTL4 Analyze
Environment(13)
10. Write short notes on: BTL1 Remember
(i) LTE Security Architecture.(7)
(ii) Mobility Management in Idle State.(6)
11. Explain Interconnection of LTE with UMTS and GSM. (13) BTL1 Remember
12. (i) Express the idea of Voice and SMS over LTE.(7) BTL2 Understand
(ii) Discuss about Backhaul Considerations(6)
13. Explain Green Wireless Networks in detail.(13) BTL4 Analyze
14. Point out the factors that are required for Modeling the channel for BTL4 Analyze
4G (13)
PART-C
1. Analyze how the problem of BS failure can be solved? How the BTL4 Analyze
communication is carried out after BS failure.
2. Assess the salient features of 4G and 5G. BTL5 Evaluate
3. Create the Hybrid 4G wireless network protocols that can be BTL6 Create
suitable for 4G and 5G.
4. Evaluate the various releases of LTE-Advanced. Which one is BTL5 Evaluate
better in terms of latency reduction?
UNIT V SOFTWARE DEFINED NETWORKS
Introduction – Centralized and Distributed Control and Data Planes – Open Flow – SDN Controllers –
General Concepts – VLANs – NVGRE – Open Flow – Network Overlays – Types – Virtualization –
Data Plane – I/O – Design of SDN Framework