Escolar Documentos
Profissional Documentos
Cultura Documentos
NOTES
100
to current editions.
5. All temporary works for formwork, excavations etc., to
be the design responsibility of the contractor.
30
Soakaway
DRAINAGE NOTES
MH6 MH7 1. All drainage works shall be carried out in accordance
Outfall with the contract specification
2. The contractor shall allow for keeping sewer trenches
and excavations as dry as practicable by pumping from
temporary sumps, dewatering and well pointing as
appropriate. The point and method of discharge to be
agreed with the drainage authority.
3. Manholes and inspection covers and frames shall
comply with the relevant provisions of BS EN124.
Manhole covers and frames to be a non-rocking design
Datum
with cushion inserts and kitemarked.
46.000mAOD
4. Manhole covers potentially subject to vehicular loads to
48.315 49.440
46.740 47.940
46.689 47.900
46.549 47.807
54.260
51.590 53.540
51.115 53.040
Cover have cover grade D400 all other covers to be B124
Level grade.
5. Contractor to take measures to protect operatives with
respect to the presence of gas in the sewer trenches
47.440
46.740
46.689
46.549
51.590
51.115
52.835
Invert
and manholes through the use of gas monitoring
Level
equipment and breathing apparatus as required.
6. Formation level for manhole bases and pipe trenches
12.31m PE Pipe
78.93m PE Pipe ref: 1.000 30.34m PE Pipe ref: 1.001 69.00m PE Pipe ref: 1.002 41.73m PE Pipe ref:1.003 ref: 1.004
36.36m PE Pipe ref: 1.005 to be free from soft spots, blinding concrete and/or
Pipe 225mm @ 1/63.4 225mm @ 1/63.9 225mm @ 1/24.6 300mm @ 1/59.6 300mm @
300mm @ 1/259.7
stone may be used as determines on site
Bedding Class S
Details Bedding Class S Bedding Class S Bedding Class S Bedding Class S 1/244.0
Combined Filter/ Carrier drain 7. Where significant excavation is required below the
Bedding Class S
manhole base/drainage trench formation level, due to
poor ground conditions, suitable excavated material,
47.881
51.171
47.826 49.892
47.827 49.358
47.819 48.887
47.814 48.483
47.814 48.173
47.834 48.106
48.696 52.578
48.040 51.703
47.862 51.130
47.826 50.505
Proposed
54.261
54.122 54.177
53.941 54.029
53.727 53.940
53.444 53.833
53.303 53.734
52.924 53.647
52.505 53.585
52.074 53.515
50.137 53.220
49.918 52.995
Ground gravel rejects or graded hardcore may be used as
Level backfill to formation level. Fill material is to be
compacted in layers with a vibratory roller complying
48.116
240.00 47.836
Existing
54.240
200.00
210.00
230.00
110.00
120.00
130.00
140.00
150.00
160.00
170.00
180.00
190.00
100.00
20.00
40.00
30.00
50.00
60.00
70.00
80.00
90.00
10.00
0.00
MH9
MH3 MH4
Inlet 1
Datum48.000mAOD Datum45.000mAOD
47.571
48.020
48.600
47.560
52.960
53.040
50.180
54.260
Cover Cover
Level Level www.staffordshire.gov.uk www.amey.co.uk
48.680
46.520
46.135
46.108
46.108
45.929
45.929
45.913
51.395
51.115
51.115
50.115
48.755
54.261
49.441
49.451
47.741 48.942
48.877 52.872
47.672 49.635
47.703 49.279
47.764 48.618
47.768 48.327
49.003 52.847
49.732 53.036
47.581 51.542
47.556 51.208
47.532 50.895
47.575 50.598
47.689 50.326
47.695 50.016
190.00 47.590
Ground Ground
Level Level
100.00
20.00
20.00
40.00
30.00
30.00
50.00
60.00
70.00
80.00
90.00
10.00
10.00
0.00
0.00
Chainage Chainage
Grid reference :
Original Drawing Size : A1 Dimensions : -
02
Long Section MH3 - MH4 Long Section MH8 - Pond Inlet 1 Scale : As Shown Copyright c Amey
. CDX8620-R05-02 P0
NOTES
100
to current editions.
5. All temporary works for formwork, excavations etc., to
be the design responsibility of the contractor.
30
DRAINAGE NOTES
1. All drainage works shall be carried out in accordance
with the contract specification
2. The contractor shall allow for keeping sewer trenches
and excavations as dry as practicable by pumping from
temporary sumps, dewatering and well pointing as
appropriate. The point and method of discharge to be
agreed with the drainage authority.
MH18 MH18 3. Manholes and inspection covers and frames shall
MH17 comply with the relevant provisions of BS EN124.
Manhole covers and frames to be a non-rocking design
with cushion inserts and kitemarked.
4. Manhole covers potentially subject to vehicular loads to
have cover grade D400 all other covers to be B124
MH15 MH16 grade.
5. Contractor to take measures to protect operatives with
MH11 respect to the presence of gas in the sewer trenches
Pond and manholes through the use of gas monitoring
MH14 equipment and breathing apparatus as required.
Inlet 2
MH10 6. Formation level for manhole bases and pipe trenches
to be free from soft spots, blinding concrete and/or
stone may be used as determines on site
7. Where significant excavation is required below the
Inlet from manhole base/drainage trench formation level, due to
filter drain poor ground conditions, suitable excavated material,
gravel rejects or graded hardcore may be used as
backfill to formation level. Fill material is to be
compacted in layers with a vibratory roller complying
with method 2 of table 6 / 4, specification for highway
Trim to this line for A1
48.020
47.680
48.540
49.760
47.570
48.460
49.480
49.760
Cover Cover Cover bedding where trenches are formed in running
Level Level Level sand/silty materials where there is a risk of fines
ingress - geotextile also to extend under manhole base.
46.505
46.285
46.135
46.555
46.372
46.372
46.018
46.018
45.930
46.827
46.827
46.773
46.018
47.035
Invert Invert Invert
Level Level Level
49.761
47.774 48.476
47.860 48.763
47.761 49.124
47.666 49.475
47.417 47.552
47.514 47.782
47.445 47.480
47.407 47.624
47.623 48.020
47.657 47.680
47.664 47.866
47.683 48.147
47.676 48.513
47.671 48.896
47.707 49.265
47.745 49.607
47.662 49.787
47.552 46.197
47.749 50.033
47.755 50.142
Ground Ground Ground
Level Level Level
Original Version Preliminary
Existing Existing Existing
47.656
Ground Ground Ground For target cost
Level Level Level Drawn: RJP For tender
Design: RJP For construction
47.08
40.00
20.00
30.00
20.00
20.00
40.00
30.00
50.00
60.00
70.00
80.00
90.00
30.00
10.00
10.00
10.00
0.00
0.00
0.00
Chainage Chainage Chainage As constructed
P:\COSTCDX8605 - Branston Locks\07 Design Disciplines\AutoCAD\Work Area\500 Series\CDX8620-R05-02-03 Long Sections.dwg
Long Section MH10 - MH11 Long Section MH14 - Pond Inlet 2 Long Section MH16 - MH18 Checked by:-
Scale 1:500(H) 1:50(V) Scale 1:500(H) 1:50(V) Scale 1:500(H) 1:50(V) S R Morgan
www.staffordshire.gov.uk www.amey.co.uk
Project Name
Branston Locks
Drawing Title
Drainage
Long Sections (2 of 2)
Grid reference :
Original Drawing Size : A1 Dimensions : -
03
Drawing No Rev
. CDX8620-R05-03 P0