INSTRUCTION MANUAL
Weighing Indicator
WM: PD40001730 A&D Company, LimitedAX Thisis @ hazard alert mark,
This mark informs you about the operation of the product.
Note This manual is subject to change without notice at any time to improve the product, No part
of this manual may be photocopied, reproduced, or translated into another language
‘without the prior written consent of the A&D Company.
Product specifications are subject to change without any obligation on the part of the
manufacture.
Copyright@2000 A&D Company, Limited1 Compliance... ve
1.1.1. Compliance with FCC Rules ..
1.1.2, | Compliance with European Directive...
2. introduction.
3. Installation and Precautions
3.1.1, Installation and Precautions..
3.1.2. ‘The Load Cell Connection:
3.1.3. Adjustment of the Load Cell Output
3.14, Verifying Load Cell Output and tnput Sensi
3.1.5. Installing the Option Board...
4. Description of Panels and symbols ..
Front Panel Description
Rear Panel Descriptior
Other Displays and Symbols
Accessories and Option OP-02.
5. Calibration.
ttems of Calibration Mode
Calibration Procedure...
‘The Whole Procedure
Preparation.
Entering the Calibration Mode
Minimum Division (Weighing Interval)...
Maximum Capacity
Zero Calibration..
Span Calibration
Exiting the Calibration Mods
Weighing Range Function
Setting Division and Range..
Digital Linearization Function
Gravity Compensation Function
‘The Gravity Acceleration Tabi
5.6. Calibration Error Code List...
6. Funetions..
61. Changing the Function Settings
6.2. F-Functions ...
6.3. CF-Functions
seem ADA929Weighing Indicator, Instruction Manual, ASD Co.,ltd.