Escolar Documentos
Profissional Documentos
Cultura Documentos
ME1110
AutoCAD Sheets
Prepared by:
2013
Using the line command, draw the following exercises:
GRADE
Line CW NAME 1
Chosen by Eng. Murad Mahmoud, The German Jordanian University
Using the line command, draw the following exercises:
GRADE
Line CW NAME 2
Chosen by Eng. Murad Mahmoud, The German Jordanian University
Using the line command, draw the following exercises:
GRADE
Line HW NAME 3
Chosen by Eng. Murad Mahmoud, The German Jordanian University
Draw the following polygons using line command
Hexagon that is 50 across two edges Hexagon that is 50 across two corners
(Circumscribed) (Inscribed)
GRADE
Polygon CW NAME 4
Chosen by Eng. Murad Mahmoud, The German Jordanian University
Draw the following shape using the circle commands
1- Draw circle 1 with diameter 80.
2- Draw a horizontal line from the center of circle one with length 70.
3- Draw circle 2 with diameter 100.
4- Draw circle 3 tangent to circles 1 and 2 with diameter 30 (Use command TTR, tan tan
radius).
5- Draw circle 4 tangent to the line and circle 1 with radius 15.
6- Draw circle 5 tangent to circles 1 and 2 with radius 20.
7- draw circle 6 tangent to circles 2 and 5 with radius 15.
8- Draw circle 7 tangent to circles 2, 4 and 6.
GRADE
Circle CW NAME 5
Chosen by Eng. Murad Mahmoud, The German Jordanian University
Draw the following shape using the circle and line commands
GRADE
Circle CW NAME 6
Chosen by Eng. Murad Mahmoud, The German Jordanian University
Draw the following shape using the polyline command
Starting width =0
Ending width =5
Angle =270
Width 5 Starting width =10 Radius = 35
Ending width =0
Width 5
GRADE
Polyline CW NAME 7
Chosen by Eng. Murad Mahmoud, The German Jordanian University
1-Start by drawing a 125x125 square
2-In the OSNAP menu select all except nearest
3-Draw a circle in the midpoint of the top side with radius 25
5- Draw a circle at the endpoint of the right side with radius 20
6- Draw a circle at the midpoint of the left side with radius 25
Track the points on the object using OSNAP
1- Enpoint 8- Center
2- Midpoint 9- Parallel to 4-5 with length 75
3- Tangent 10- Tangent
4- Endpoint 11- Snap from lower right corner @-50,75
5- Tangent 12- Intersection
6- Qaudrant 13- Apparent intersection of lines 6-7 and 8-9
7- Perpendicular 14- Nearest
GRADE
OSNAP CW NAME 8
Chosen by Eng. Murad Mahmoud, The German Jordanian University
1-Draw a square of 150x150- Draw a circle in the upper right corner with radius 25
3- Copy the circle to the other corners
4- Copy the circle to the middle of the square, take the first circle and copy @-75,-75
5- Draw a circle in the midpoint of each side with radius, 5, 10, 15, 20
6- Copy the circles to the middle of the square
7- Draw circles tangent to three other circles in each part of the square
8- Scale the drawing down by scale 0.1 (Keep the original)
9- Rotate the drawing with an angle of 45
GRADE
Move, Copy and Scale CW NAME 9
Chosen by Eng. Murad Mahmoud, The German Jordanian University
Using the line command, draw the following exercise:
copy with
scale factor = 0.4
GRADE
Draw HW NAME 10
Chosen by Eng. Murad Mahmoud, The German Jordanian University
Rectangular Array Polar Array
25 Lines
GRADE
Arrays CW NAME 11
Chosen by Eng. Murad Mahmoud, The German Jordanian University
4 3
2 1 2 3
5
1
6 4 5 6
7 7 8 9
8 * 0 #
9 0
Times New Roman
Text Height 5.5
Items Not Rotated
0
CM
1
1
CM 2
2
3
3
4
5
4
6
7
5
8
9
6
10
11
7
12 The short dashes are
13
2.5 long and the 8
14
15
longer dashes are 5
9
Text Height 2
10
11
80 100 1
10 1
70
60 10 100
90 80 70 20 1 12
1 60 30
50 120 50
3 0
14
1
01 0
13
4
0
40
40
150 20 10 0
180170 16 30
30
0 15
160
0
0 10 2
14
170 180
15
GRADE
Array CW NAME 12
Chosen by Eng. Murad Mahmoud, The German Jordanian University
Hatch type: Angle
Scale: 3.5 Hatch type: Angle
Scale: 5
STOP
Hatch Type Solid Text Size:15
Color: Red Hatch Type Solid
Color: Red
GRADE
Array HW NAME 13
Chosen by Eng. Murad Mahmoud, The German Jordanian University
O NS AD
T A C TO
LO Y M AU
F
E
A EL G
R IN
SU RN
N
A
FU
LE
AutoCAD 2008
GRADE
Draw and Modify HW NAME 14
Chosen by Eng. Murad Mahmoud, The German Jordanian University
Offset distance = 4
All fillets R =6
Use Mirror
Offset distance = 4
draw a circle: diameter =25
turn it into a cloud: arc lenghts
5,10
GRADE
Offset and Mirror CW NAME 15
Chosen by Eng. Murad Mahmoud, The German Jordanian University
Using the deaw and modify commands, draw the following exercises:
Step 3: Offset and add the frame and then use mirror to create the other half
GRADE
Modify CW NAME 16
Chosen by Eng. Murad Mahmoud, The German Jordanian University
Using the deaw and modify commands, draw the following exercises:
GRADE
Modify HW NAME 17
Chosen by Eng. Murad Mahmoud, The German Jordanian University
Draw the following excersices and add dimensions to them on a separate layer.
Add the hatch to the first object and calculate its area
GRADE
Dimensioning CW NAME 18
Chosen by Eng. Murad Mahmoud, The German Jordanian University
Prepare the block below then use it to create the following drawing
GRADE
Block CW NAME 19
Chosen by Eng. Murad Mahmoud, The German Jordanian University
For the following two excersices, draw the object, add the dimensions and the
hatch and calculate its area (if applicable)
GRADE
Dimensioning HW NAME 20
Chosen by Eng. Murad Mahmoud, The German Jordanian University
Using the commands explained so far, draw this (or any) keyboard. Assume
the dimensions.
GRADE
Bonus Homework HW NAME 21
Chosen by Eng. Murad Mahmoud, The German Jordanian University
For the following excersices, draw the object, add the dimensions and the
hatch and calculate its area, then create a block of the entire drawing and
GRADE
2D Drawing CW NAME 22
Chosen by Eng. Murad Mahmoud, The German Jordanian University
Using Revolve tool, draw the following objects:
Using Sweep command, draw the following objects:
Using Sweep command, draw the following objects:
Using Revolve command, draw the following objects:
Using 3D modeling commands, draw the following object, then generate
the three major projections with hidden lines
Using 3D modeling commands, draw the following object, then generate
the three major projections with hidden lines