Escolar Documentos
Profissional Documentos
Cultura Documentos
Page 1
Date of installation ................................. 1. Check for rot and, if necessary, smooth out
splinters and round off sharp edges of cracks.
Checks depend on the type of equipment.
Any equipment with moving parts must 2. Check that all bolts and screws are tight and
be checked at least twice a year, static retighten if necessary.
equipment at least once a year.
3. Recommendation: apply paraffin wax to the
Intervals for maintenance work and checks upper end grain areas once a year, please
generally depend on refer to Order No. 0.90100, 1 litre.
- location Bearing
- kind of use
- frequency of use 4. Check that bearing in the middle frame
- possible vandalism moves freely, apply grease if required.
Belt Path with bracing 6. Safety check: When the belt is loaded on
20.08.2014
for soft grounds both sides, the clearance to the ground must
Order No. 6.64800 be at least 23 cm.
Adjustment of middle frame: loosen the
3 bolts, push bearing and axle upwards, and
1 refasten.
En-EN
2 Structural stability
5 23 cm
7. In order to check for rot at wooden parts
6 or steel feet for corrosion, uncover the
7 foundations once a year.
0.92890 roller without bearing 99.00540 cross beam, cut into halves,
pre-drilled with liner and wood
screws incl. bolts
without illustration