Escolar Documentos
Profissional Documentos
Cultura Documentos
Fire
Suppression
System
NAFFCO FZCO is among the world’s leading firefighting technology and fire safety solutions, NAFFCO
manufacturers and suppliers of top-tier firefighting has worked in both the private and government sectors,
equipment, fire protection systems, fire alarms, security as well as manufacturing plants, hospitals, stadiums,
and safety engineering systems worldwide. Since malls and other organizational projects, delivering
its humble beginnings, NAFFCO has grown from its comprehensive fire safety and engineering solutions.
headquarters in Dubai, UAE to expand to serving over
100 countries around the world. NAFFCO is associated with globally renowned
international companies in the fire protection industry
such as Esser, Secutron, Megalights, Evax, Fike, Central,
One Stop Shopping for All Your Fire Safety Shield, Mueller, Giacomini, RB Pumps, Bombas, Ideal
and Security Needs Pumps, Joslyn Pumps, Peerless Pumps.
2 www.naffco.com
FM-200® CLEAN AGENT
FIRE SUPPRESSION SYSTEM
CLEAN AGENT: HFC-227ea (FM-200®)
CHEMICAL NAME: Heptafluoropropane ASHRAE Designation HFC-227ea
TRADE NAME: FM-200® (DuPont™)
PHYSICAL PROPERTIES
Chemical Name Heptafluoropropane (CF3CHFCF3)
Molecular Weight 170.03
Boiling Point @ 760 mm Hg 3.9°F (-15.6°C)
Freezing Point -204°F (-131.1°C)
Critical Temperature 215°F (101.7°C)
Critical Pressure (psia) 422 psia (2912 kPa)
Critical Volume (ft3/lbm) (cc/mole) 0.0258 (274)
Critical Density (lbm/ft3) 38.8 (621 kg/m3)
Specific Heat, Liquid (BTU/lb-F°) @
0.283 (1.184 kj/kg/°C)
77°F (25°C)
Specific Heat, Vapor (BTU/lb-°F) @ constant
0.1932 (0.808 kj/kg/°C)
pressure of 1 ATM @ 77•F (25•C)
Heat of Vaporization (BTU/lb) at Boiling Point 57.0 (132.6 kj/kg)
Thermal Conductivity (BTU/h ft°F) of Liquid @
0.040 (0.069 w/m°C)
77°F (25°C)
Viscosity, Liquid (lb/ft/hr) @ 77°F (24°C) 0.443 (0.184 centipoise)
Vapor Pressure (psia) @ 77°F (25°C) 66.4 (457.7 kPa)
Ozone Depletion Potential 0
Estimated Athmospheric Lifetime (years) 31 - 41
LC50 (Rats; 4hrs - ppm) >788,000
FEATURES
• Colorless, odorless, liquified compressed gas, stored • Zero ozone depleting potential.
as a liquid. • Low global warming potential.
• Electrically-nonconductive. • Included on the U.S. EPA Significant New
• Discharge as gaseous vapor (due to its relatively low Alternative Policy (SNAP) rules.
boiling point).
USE and LIMITATIONS
FM200 system shall be used on the following FM200 systems shall “NOT” be used on fire involving
Class of Hazards: the following materials:
EXPOSURE LIMITATIONS
www.naffco.com 3
AGENT STORAGE CONTAINER: FM-200®
FEATURES
• Pressure Vessel to hold agent until activated.
• Container Super – Pressurization Level
360 psig at 70°F (24.8 bar at 21°C)
after filling with dry nitrogen
• Container Storage Temperature Limitation
32°F (0°C) Minimum
130°F (54.4°C) Maximum
• Container Rating
DOT 4BW500
TC 4BWM534
• Container Actuation Methods*
Electric / Pneumatic / Manual
• Container Color Options
White (Default)
Red
• Fill Increments
1.0 lbs (0.5 kg)
• Fill Range
40 to 70 lbs/ft3 (630 to 1121 kg/m3)
PRODUCT APPROVALS
4 www.naffco.com
IMPULSE VALVE
FEATURES
• The 1” & 3” Impulse Valves are a rupture disc (metal
diaphragm), pressure operated device that allows
the agent to be released from the container and
into the protected enclosure via the associated
piping network and discharge nozzle(s).
PRODUCT APPROVALS
MODEL NF-06-520
COMPONENT MATERIAL
www.naffco.com 5
IMPULSE VALVE OPERATOR (IVO) KIT
MODEL: NF-70-279
FEATURES
• Provides the means to electrically or manually
activate the Impulse Valve clean agent container
by providing the force required to extend a piston
that will open the rupture disc, allowing the agent
to be released from the container.
PRODUCT APPROVALS
2
4
Electrical Consumption DIN Connector w/ Cable & ½” NPT for conduit connection
6 www.naffco.com
IMPULSE VALVE PNEUMATIC OPERATOR (IVPO) KIT
MODEL: NF-70-280
FEATURES
• The Impulse Valve Pneumatic Operator (IVPO)
provides the means to pneumatically activate the
Impulse Valve clean agent container by providing
1 the force required to extend a piston that will open
the rupture disc, allowing the agent to be released
from the container.
4
PRODUCT APPROVALS
www.naffco.com 7
IMPULSE RELEASE MODULE
FEATURES
• The Impulse Releasing Module provides the
primary interface between the supervised releasing
circuit(s) of a NAFFCO fire suppression system and
the Impulse Valve Operator (IVO); which is used to
release the fire suppressant agent from an impulse
valve container.
MODEL NF-10-2748
+24V Supervisory:
CURRENT 20.0 ma (during capacitor charging), 3.0 ma (after capacitor is charged)
CONSUMPTION -24V Activated:
-37.0 ma (LED active)
COMPATIBLE ACTUATION
NF-02-12728, Impulse Valve Operator (IVO)
DEVICES
COMPATIBLE RELEASING
NAFFCO Single Hazard Panel*
PANELS
*Note: A maximum of six IRM’s, wired in parallel,can be connected to each panel’s releasing circuit.
8 www.naffco.com
LOW PRESSURE SWITCH
FEATURES
• Continuously monitors the container pressure for
a low-pressure condition. If the pressure inside
the container drops below 288 psig (1986 kPa),
the switch contacts will transfer and invoke a
“supervisory” indication on the control panel.
PRODUCT APPROVALS
MODEL 02-12533
www.naffco.com 9
DISCHARGE PRESSURE SWITCH
FEATURES
• Used to provide a positive pneumatic confirmation
to the control system that the NAFFCO Fire
Suppression system has been discharged.
PRODUCT APPROVALS
MODEL 02-12534
10 www.naffco.com
ENGINEERED DISCHARGE NOZZLES
FEATURES
• The discharge nozzle size refers to the size of
schedule 40 or 80 pipe that it can be connected to.
PRODUCT APPROVALS
NOZZLE SIZE AND AREA COVERAGE
"R" 40'-00"
www.naffco.com 11
LIQUID LEVEL INDICATOR (LLI)
FEATURES
• Provides a means of verifying the weight of agent
in a container without having to remove the
container and weigh it on a calibrated scale.
Float
CONTAINER SIZE
LLi PART NUMBER
lb. (L)
150 (61) NF-70-1353-14
215 (88) NF-70-1353-18
375 (153) NF-70-1353-27
650 (267) NF-70-1353-38
1000 (423) NF-70-1353-49
12 www.naffco.com
CHECK VALVE
FEATURES
• Used to prevent agent loss from the open end of
a manifold and/or piping system in the event that
one or more containers are removed for servicing /
maintenance.
PRODUCT APPROVALS
Length
02-4157 3” (80 mm) Check Valve 6” (152 mm) 8” (203 mm) 31 lbs. (14.1 kg) 4.5’ (1.37m)
NOTE: Check Valves have threaded female connections on both ends; therefore piping leading into and exiting
from must be threaded.
IMPORTANT NOTE: The Check Valves must be installed with the flow arrow pointing in the direction of discharge.
If revised, the system will not charge.
www.naffco.com 13
CAUTION / ADVISORY SIGNS – HFC-227ea
PRODUCT APPROVALS
HFC-227ea
HFC-227ea EXTINGUISHING
SYSTEM DISCHARGE ALARM
EXTINGUISHING
SYSTEM
IF ACTIVE
DO NOT ENTER AREA MAIN / RESERVE
HFC-227ea
HFC-227ea EXTINGUISHING EXTINGUISHING
SYSTEM ALARM
SYSTEM ABORT
IF ACTIVE
EXIT AREA IMMEDIATELY
PUSH AND HOLD
14 www.naffco.com
NAFFCO Single Hazard Panel ½
FEATURES
• The NAFFCO Single Hazard Panel is a compact,
cost-effective, conventional fire alarm and
suppression releasing panel.
PRODUCT APPROVALS
Control System
m: 1 = all modes
NF-10-063-m-c-p
c: R = red, G = gray
p: 2 = 240VAC
www.naffco.com 15
NAFFCO Single Hazard Panel 2⁄2
GENERAL FEATURES
• Microprocessor-controlled. • The controller is shipped from the factory pre-
• Power-limited on all circuits except power configured for Clean Agent suppression operation.
connections (P1).
• Four operational modes: • The main controller contains all electronics
1. Clean agent release. required for a complete detection and control
2. Clean agent release with sprinkler operation. system suitable for most applications. Optional
3. Sprinkler operation. modules, which plug into the main circuit board,
4. Industrial releasing. are available
• Ten system status LEDs to provide positive indication
of system status.
• Seven segment diagnostic LED for trouble and event PRODUCT APPROVALS
occurrences.
• System configuration via dip-switches.
• Local piezo with distinct event tones.
• Reset switch.
• Audible silence switch.
• Disable Mode for audible and release circuits, and
relays.
16 www.naffco.com
INPUT DEVICES
WORKING
15.0 - 33.0 VDC
VOLTAGE
MAXIMUM
42 VDC
VOLTAGE
SUPERVISORY
40mA @ 24 VDC
CURRENT
SURGE CURRENT 160mA max. @ 24 VDC
ALARM CONTENT 150mA max. @ 24 VDC
AMBIENT
32°F to 120°F (0°C to 49°C)
TEMPERATURE
CONTACT RATING N/O Contacts, 150mA max. @ 24V
CONVENTIONAL BASES
www.naffco.com 17
Serving Over 100
100
00 Countries
C
Co
Cou
ou
oun
unt
ntr
ntri
ntrie
trie
ries
ies
ess Worldwide
W
Wo
Wor
Worl
orld
rld
rldw
ldw
dw
dwi
dwid
wid
wide
de
e
CAT.NO.NF/FM200CAFSS/01/15
NAFFCO FZCO
World Headquarters
Dubai, United Arab Emirates
Email: info@naffco.com
www.naffco.com
In line with NAFFCO policy for continuous product development,
NAFFCO has the right to change specifications without prior notice.