Escolar Documentos
Profissional Documentos
Cultura Documentos
Summary
The manufacturer has specified an optimum level of the power steering fluid and it is assumed
that when the fluid is hot, it will be at this level. If the fluid is cold, it may be at a lower level.
The objective of this procedure is to show you how to check and adjust power steering fluid level
as necessary.
Objective
Personal safety
Whenever you perform a task in the workshop you must use personal protective clothing and
equipment that is appropriate for the task and which conforms to your local safety regulations
and policies. Among other items, this may include:
If you are not certain what is appropriate or required, ask your supervisor.
Safety check
Avoid rotating engine components when you are checking the fluid level.
Make sure that you understand and observe all legislative and personal safety procedures
when carrying out the following tasks. If you are unsure of what these are, ask your
supervisor.
Points to note
The power steering fluid should be at operating temperature to ensure an accurate reading
of the fluid level.
Always refer to the shop manual for the recommended type of power steering fluid.
Oils and fluids tend to expand in volume when they are heated.
The manufacturer has specified an optimum level of the power steering fluid and it is
assumed that when the fluid is hot, it will be at this level. If the fluid is cold, it may be at
a lower level.
The term 'bushing', used in this topic as a component name, may be more familiar to you
as 'bush' or bushes'.