MIDI Patch changes: KNOBS: Timeline presets are arranged in a grid of 100 numbered Type encoder 19 0-11 Time 3 0-127 Banks (00-99) with 2 presets (A and B) within each Bank for Repeats 9 0-127 a total of 200 presets. Mix 14 0-127 Filter 15 0-127 Because MIDI Program Change messages have a maximum Grit 16 0-127 number of 128 (0-127), the presets are grouped into 2 MIDI Speed 17 0-127 Patch Banks: Depth 18 0-127 MIDI BANK 0 = PRESETS 00A-63B PARAMETERS: MIDI BANK 1 = PRESETS 64A-99B Tap Division 21 0-4 Boost 23 0-60 The presets are numbered sequentially within each bank: Persist Off/On 22 0-1 Smear 38 0-18 PRESET 00A = MIDI program # 0 High Pass 47 0-20 PRESET 00B = MIDI program # 1 Expression Off/On 60 0-1 PRESET 01A = MIDI program # 2 MIDI Clock Off/On 63 0-1 dTAPE - Tape Speed 58 0-1 PRESET 01B = MIDI program # 3 dTAPE - Low End 59 0-20 PRESET 02A = MIDI program # 4 etc. up to #127... dBUCKET - Range 45 0-1 DIGITAL - Repeat Dynamics 56 0-1 TimeLine always powers up in MIDI Patch Bank 0, so if you DUAL - Time 2 32 0-26 plan to stay within the first 127 presets (00A-63B), simply DUAL - Repeats 2 34 0-18 send a standard MIDI Program Change message to load a DUAL - Mix 2 33 0-18 preset. DUAL - Config 36 0-1 PATTERN - Pattern 39 0-15 If you will be using MIDI Bank 1, it is advisable to send a SWELL - Rise Time 44 0-27 standard MIDI Bank Change message [MIDI CC# 0 with a TREM - Speed 61 0-34 value equal to the MIDI Bank #] before each MIDI Program TREM - Depth 57 0-18 Change. TREM - LFO 29 0-4 FILTER - Q 40 0-11 Other MIDI CC numbers: FILTER - LFO 28 0-10 CC# Value Range FILTER - Depth 41 0-18 A footswitch 80 down=0 up=127 FILTER - Speed 42 0-34 FILTER - Location 43 0-1 B footswitch 82 down=0 up=127 LO-Fi - Mix 51 0-20 TAP footswitch 81 off=0 on=127 LO-Fi - Vinyl 52 0-18 Remote TAP 93 any LO-Fi - Sample Rate 49 0-20 Expression Pedal 100 0-127 LO-Fi - Bit Depth 50 0-20 Bypass 102 byp=0 eng=127 LO-Fi - Filter 53 0-8 Phase Reset 125 any ICE - Interval 30 0-29 MIDI Patch Bank 0 0-1 ICE - Slice 46 0-2 -Send a 0 value to access presets 00A - 63B. ICE - Blend 25 0-20 -Send a 1 value to access presets 64A - 99A. DUCK - Sensitivity 37 0-17 DUCK - Release 55 0-20 DUCK - Feedback 54 0-1 (continued on next page) LOOPER: Record 87 any Play 86 any Stop 85 any Reverse (toggle) 94 any Full/Half Speeed (toggle) 95 any Pre/Post (toggle) 96 any Undo (to initial loop) 89 any Redo 90 any Looper Level 98 0-127 pg 25 TimeLine - User Manual ®
MIDI Specification (continued)
Looper MIDI control via MIDI note #’s:
The looper can also be controlled with MIDI note numbers.