Você está na página 1de 2

Radio transmitter

Oscillator: Creates alternating current at the frequency on which the transmitter


will transmit. The oscillator usually generates a sine wave, which is referred to
as a carrier wave.
Oscillators are important in many different types of electronic equipment. For example, a quartz
watch uses a quartz oscillator to keep track of what time it is. An AM radio transmitter uses an
oscillator to create the carrier wave for the station, and an AM radio receiver uses a special form of
oscillator called a resonator to tune in a station. There are oscillators in computers, metal
detectors and even stun guns

-Nagke create ng ac (alternating current) sa frequency para mag transmit yung transmitter
Modulator: Adds useful information to the carrier wave. There are two main ways to add this
information. The first, called amplitude modulation or AM, makes slight increases or decreases
to the intensity of the carrier wave. The second, called frequency modulation or FM, makes
slight increases or decreases the frequency of the carrier wave.
A modulator is a device that performs modulation. ... The aim of analog modulation is to transfer
an analog baseband (or lowpass) signal, for example an audio signal or TV signal, over an analog
bandpass channel at a different frequency, for example over a limited radio frequency band or a
cable TV network channel.
RF Amplifier: Amplifies the modulated carrier wave to increase its power. The more powerful the amplifier,
the more powerful the broadcast.
A radio frequency power amplifier (RF power amplifier) is a type of electronic amplifier that converts a low-
power radio-frequency signal into a higher power signal. Typically, RF power amplifiers drive the antenna of a
transmitter.

-sya yung nagco convert ng low-power radio-frequency to higher power radio frequency

Antenna: Converts the amplified signal to radio waves


Nagko convert ng amplified signal into radio waves
Radio receiver
Antenna: Captures the radio waves.
-Sya yung sumasagap ng radio waves
RF amplifier: A sensitive amplifier that amplifies the very weak radio frequency
(RF) signal from the antenna so that the signal can be processed by the tuner.
-Sya yung nagpapalakas ng mga very weak radio frequency signal galing sa antenna
para yung signal is ma process sa tuner.

Tuner: A circuit that can extract signals of a particular frequency from a mix of
signals of different frequencies.
Your radio receiver needs a tuner. The antenna will receive thousands of
sine waves. The job of a tuner is to separate one sine wave from the
thousands of radio signals that the antenna receives. Tuners work using a
principle called resonance. That is, tuners resonate at, and amplify, one particular frequency and
ignore all the other frequencies in the air. It is easy to create a resonator with a capacitor and
an inductor (check out How Oscillators Work to see how inductors and capacitors work together to create
a tuner). The tuner causes the radio to receive just one sine wave frequency. Then the radio has to extract
the voice out of that sine wave. This is done with a part of the radio called a detector or demodulator.

-eto naman yung device na pwedeng ikaw yung mag adjust or pumili ng frequency.
Halimbawa yung sa radio na may pindutin ka lang magpapalit na frequency.
Detector: Responsible for separating the audio information from the carrier wave.
-Eto naman yung nag separate ng audio information from carrier wave.
Audio amplifier: This component’s job is to amplify the weak signal that comes
from the detector so that it can be heard. This can be done using a simple
transistor amplifier circuit.
An audio power amplifier (or power amp) is an electronic amplifier that amplifies low-power
electronic audio signals such as the signal from radio receiver or electric guitar pickup to a level that
is high enough for driving loudspeakers or headphones. Audio power amplifiers are found in all
manner of sound systems including sound reinforcement, public address and home audio systems
and musical instrument amplifiers like guitar amplifiers. It is the final electronic stage in a typical audio
playback chain before the signal is sent to the loudspeakers.

- Yung trabaho naman ng device na to is palakasin yung low power audio signals
para mas maging clear pakinggan yung sounds.

Você também pode gostar