Escolar Documentos
Profissional Documentos
Cultura Documentos
SL NO QUESTIONS
The actual display of editable value must be same as the value set in the projects
1 units.
TRUE / FALSE
When you place curser for creating additional level, the dimension display on screen
2 is
A) Listening. B) Temporary C) Permanent D) None of the above
When you move the buble end out of line, the effect appears only in that view. No
3
other views are affected. TRUE / FALSE
The segments created from dragging the bubble have a solid line style which can
4
not be edited. TRUE / FALSE
To create new level element type, open one of the following revit family template file
5
A) Level head.rft B) Grid head.rft C) Level head.rte D) Grid head.rte
While creating a level, in option bar, if make plan view option is unmarked, then
6 corresponding floor plan view is not generated
TRUE / FALSE
If the permenant dimension is locked (constraints), when a single level is moved, all
7 the relevant level lines are moved.
TRUE / FALSE
In Architecture tab, while selcting wall tool, Wall sweep and Reveal get activated
8
only in 3D view. TRUE / FALSE
When you draw a foundation wall type, the option name is displayed as
9
A) Width B) Height C) Depth D) Size
The Wall type name will automatically get updated when its parameters are
10
changed. True / False
While creating arc wall, in option bar, if keep concentric is selected, then the radius
11 centre point will not get changed.
TRUE / FALSE
While drawing a straight wall, what is to be done to create a arc in wall end
12 A) select chain option. B) Select fillet option
C) Draw a fillet wall D) Draw a tangent wall
13 A Negative Value moves the sweep toward the wall core. TRUE / FALSE
In vertically compound wall, the region's thickness can be changed in the row that is
19
assigned to it. TRUE or FALSE
You can not choose materials or thickness for core boundry layers
20
TRUE or FALSE
All wall joints less than ----------- are mitered
21
A) 90° B) 30° C) 45° D) None of the above
In wall instance property, the "Top extension distance" is activated for the purpose of
22 A) To extend wall height beyond level line. B) To extend a layer. C) To increase
wall thickness. D) None of the above
When location line exterior is selected, always the location line displays on the
24
exterior side of the wall irrelevant of how you draw the wall. TRUE / FALSE
In revit wall layers if the row does not have any region assigned to it, the thickness
25
is zero TRUE/FALSE
26 In wall layers a row can be assigned for more than one layer TRUE/FALSE
28 When u create a wall schedule the vertically stacked wall can be scheduled TRUE/F
29 The sub walls (In stacked) can be scheduled TRUE/FALSE
30 When u draw grid lines the grid numbers automatically generatd TRUE/FALSE
After breaking up of a Vertically stacked wall, the walls again can be reassembled.
32
TRUE / FALSE
Grid lines are
1) Finite planes
33
2) Their extents can be dragged in Elevation views
A) TRUE B) FALSE C) Only point 1 is correct D) Only Point 2 is correct
You can use the arrow key to move the level-based element up or down.
36
TRUE / FALSE
If the wall is moved, the furniture placed near the wall moves along with the wall.
37
This is possible using an option. TRUE / FALSE
For arc lines, the radius remains at a constant offset from the arc wall, even if the
39
radius of the wall changes. TRUE / FALSE
Using copy to Clip board option, you can copy the Refernce level in the Family
40
Editor. TRUE / FALSE
Use the copy to Clipboard tool, when you need to swith views before placing the
42
copies. TRUE / FALSE
43 Using Rotate tool, the Window can rotate without their wall
44 You can also rotate an Element using Listening dimension. TRUE / FALSE
When you use Pick mirror axis, you can pick anything in the model such as
47
elements, model etc. TRUE / FLASE
48 Arrays are not supported for most annatation symbol. TRUE / FALSE
To unpin a pinned element, just click the pushpin control in the drawing area.
56
TRUE / FALSE
57 In Revit, Doors & Windows are not hosted components. TRUE / FALSE
When Tape measure tool is used to measure a inclined wall, the length and the
59
angle from horizintal is displayed. TRUE / FALSE
62 Chain option is not available for Tape measure tool. TRUE / FALSE
66 To create a sloped suface, use slope arrow tool in Floor. TRUE / FALSE
While placing a component, if you use the space key, the component rotate 90°
68
Clockwise
The split line tool will become active when you edit the
71
A) Wall B) Floor C) Roof D) Staircase
One of the option under curved edge condition tool is (For floor modification)
72
A) Sloped surface B) create curve C) Project to side D) Curved edge
To remove floor shape modifications and reset to original sate, click Reset shape.
73
TRUE / FALSE
While using Join geometry tool, the first selected element is not extended.
74
TRUE / FALSE
The Join / Unjoin roof tool can be used between Roof created using Roof by foot
76
print and Roof by extrusion. TRUE / FALSE
When you place permenant linear or angular dimensions, a lock control appears
82
with the dimension. TRUE OR FALSE
Which is the correct statement
83 A) EQ symbol represents Equality constraints B) EQ symbol represents equal
dimesnion.
In view range option, one of the below is not belongs to primary range
86
A) Top B) Cut plane C) Level D) Bottom
View range are view specfic and can be copied to other views.
87
TRUE or FALSE
To add a framing elevation view, you must have a grid in your view.
88
TRUE or FALSE
You can not split sections into segments tHat are orthogonal to the view direction.
91
TRUE / FALSE
What is the view where components that are farther away appear smaller and
92 components that are closer appear larger.
A) Perspective view B) Orthographic view C) 3D view D) Isometric view
Orthographic 3Dviews shows the building model in a 3D view where all components
93 are the same size regardless of the camera's distance.
TRUE / FALSE
96 Tags and keynotes can not be placed in a 3D view that has been locked
To blend the line color of an element with the background color of the view, go to VG
98 and edit the below
A) Transperancy B) Cut line C) Halftone D) Cut pattern
Project views and View Templates are linked. When a template changes, all views
99
created from that template update automatically. TRUE / FALSE
100 View template can be transferred from one project to another. TRUE / FALSE
101
MS PROJECT
SL NO QUESTIONS
When you update the progress, if you change the progress %, the remaining
1
duration also changes automatically. TRUE OR FALSE
When you update the progress, project do not update the manually scheduled task.
3
TRUE / FALSE
Multiple baselines Gantt view enable you to see the first 3 baselines.
6
TRUE or FALSE
What is BAC
9
A) Baseline cost B) Budgeted actual cost C) Budgeted at completion
SPI is equal to
10
A) EV / PV B) PV / EV C) EV / AC D) EV - PV
TURE - FCP QUESTIONS & ANSWERS
1 2 22 SENT
1 2 22 SENT
A 2 24 SENT
1 2 SENT
1 2 30 SENT
1 2 31 SENT
C 2 32 SENT
1 2 49 SENT
No 2 50 SENT
B) 3 2 37 SENT
C) Eiher layer or
2 43 SENT
region
0 2 43 SENT
1 2 41 SENT
D) None of the
2 42 Less than 20° is correct SENT
above
In type property the wall layer can be
unlocked and then this "Top extension
B 2 45 SENT
distance" is activated for increasing a
particular layer.
1 2 45 SENT
1 2 47 SENT
0 2 48 SENT
0 2 48 SENT
0 2 55 SENT
1 2 55 SENT
1 2 56 SENT
1 2 56 SENT
0 2 55 SENT
1 2 56 SENT
1 3 63 SENT
B 3 63 SENT
0 3 63 SENT
1 3 66 SENT
1 3 67 SENT
1 3 67 SENT
0 3 68 SENT
A 3 67 SENT
1 3 67 SENT
0 3 70 SENT
1 3 72 SENT
B 3 72 SENT
1 3 72 SENT
C 3 73 SENT
B 3 74 SENT
B 3 98 SENT
D 3 91 SENT
B 3 98 SENT
1 3 91 SENT
0 3 92 SENT
C 3 95 SENT
1 3 97 SENT
A 3 98 SENT
C 3 98 SENT
0 3 97 SENT
A 3 98 SENT
B 3 98 SENT
B 3 102 SENT
1 4 105 SENT
B 4 110 SENT
1 4 118 SENT
B 4 118 SENT
B 4 128 SENT
C 4 129 SENT
1 4 130 SENT
0 4 131 SENT
C 4 132 SENT
1 4 133 SENT
0 4 139 SENT
1 5 143 SENT
1 5 144 SENT
B 5 150 SENT
1 5 156 SENT
A 5 156 SENT
B 5 162 SENT
D 5 162 SENT
C 5 163 SENT
1 5 164 SENT
1 5 168 SENT
B 5 170 SENT
D 5 170 SENT
0 5 172
A 5 173
1 5 173
C 5 175
1 5 176
0 5 177
1 5 178
C 5 181
0 5 183
1 5 183
1 9 128 sent
A 9 130 sent
0 9 131 sent
C 9 132 sent
A 9 132 sent
1 9 133 sent
1 9 132 sent
A 10 141 sent
C 10 141 sent
A 10 141 sent