Make sure the set is turned on and displaying a picture.
Press the menu button on the factory remote. Go to the audio settings page. Press 8, 5, 2, 3 and the service menu is displayed. Haier Service Menu Instructions Method 1 Press {Menu} button. Press {Source} {8} {8} {9} {3} Press {OK} Press {Exit} button to exit service mode. Method 2 Turn the TV set on. Press {Source} {2} {5} {8} {0} Press the {Exit} key to leave the service menu. Method 3 Turn the TV set on. Press {Menu} {1} {9} {9} {9} Press the {Exit} key to leave the service menu.
ChangHong Service Menu Instructions
Method 1 Turn the TV on. Turn the Volume all the way down to "0" Then press and hold the {MUTE} button on the remote and the {MENU} button on the TV for few seconds. A "S" will be displayed at top centre of screen. To exit, turn the power off. Method 2 Turn the TV on Using the remote: Press {MUTE} button. Then press the {MENU} button and select "SOUND" option. Select "BALANCE" option. Now press the {3} {1} {3} {8} buttons. The Service Menu will be displayed. To exit, turn the power off.
Micromax Service Menu Instructions
Design Menu Can access all other modes through this - Access to Overscan and other settings Using the remote, enter the “Picture” submenu in the OSD Choose the “contrast” item and press {1} {9} {5} {0} Design Menu will appear in the left top of screen Factory Menu Access to colour calibration & WB settings Using the remote, enter the “Picture” submenu in the OSD Choose the “contrast” item and press {9} {7} {3} {5} Factory Menu will appear in the left top of screen Service Menu Using the remote, enter the “Picture” submenu in the OSD Choose the “contrast” item and press {9} {7} {0} {5} Service Menu will appear in the left top of screen
Panasonic Service Menu Instructions
LCD Method 1 Start with the TV Turned On. Press the Menu Button on the remote, then {4} {7} {2} {5} TV Method 1 Hold down the {VOL -} button ON THE TV. Press the {RECALL} or {INFO} button 3 times on the remote. The Service Menu will be displayed. Use {1} {2} on remote to navigate main menu items. Use {3} {4} on remote to navigate sub-menu items. Use {VOL+} {VOL -} on remote to change item value. Power off to exit service mode and save. TV Method 2 Hold down the {VOL -} button on the TV Then press the {0} button 3 times on the remote. To exit, press the {EXIT} button or turn the power off. Projector Method 1 Turn the Projector on. Press the {POWER} button. A "Power Off" confirmation will come up on screen. Then press {LEFT} {UP} {DOWN} {UP} {DOWN} & {ENTER} buttons. The Service Menu will be displayed. To exit, turn the Projector Off. Projector Method 2 Turn the Projector on. Press the {POWER} button. Then press {RIGHT} {UP} {DOWN} {UP} {DOWN} & {ENTER} buttons. The Service Menu will be displayed. To exit, turn the Projector Off. Projector Method 3 Press the {MENU} button. Go to "Options" menu. Select "OSD". Then press and hold the {ENTER} button, until the Service Menu is displayed. Press the {MENU} button to exit. Imran Ashraf Khan +923139282880
Philips Service Menu
You can use the Philips service menu, for such things as resetting the digital tuner, a total factory reset and enabling/disabling hotel mode. In this mode you must be careful as you can cause irreparable damage to your set. Method 1 Press the {0}, {6}, {2}, {5}, {9}, {6} & {MENU} buttons on the remote. Method 2 Press the {0}, {6}, {2}, {5}, {9}, {6} & {INFO} buttons on the remote. Method 3 Press the {1}, {2}, {3}, {6}, {5} & {4} buttons on the remote. Method 4 Press {0}, {6}, {2}, {5}, {9}, {6} & {OSD/STATUS/INFO} buttons. Method 5 Press {0}, {6}, {2}, {5}, {9}, {7} & {MENU} buttons. Method 6 Press {0}, {6}, {1}, {5}, {9}, {6} & {MENU} buttons. Method 7 Press {0}, {6}, {1}, {5}, {9}, {7} & {MENU} buttons. LCD Monitor Press and hold the "AUTO" & "MENU" button, Then press "POWER" button to turn ON the lcd monitor. Now press the "MENU" button to open the OSD menu, at the bottom of menu, you get the extra selection, Go and select it, then you can login to factory service mode.
Samsung Service Menu
You can use the Samsung service menu, for such things as resetting the digital tuner, a total factory reset and enabling/disabling hotel mode. In this mode you must be careful as you can cause irreparable damage to your set. Method 1 Put TV on standby and then push in series these buttons on the remote: 'info, menu, mute, power' the TV will then turn itself on and display the service menu. Method 2 Turn the power off. On the remote, press Mute followed by 1, 8, 2, Power in sequence. Method 3 With the TV in standby, press the {DISPLAY} {P.STD} {MUTE} {POWER} on the remote. Method 4 With the TV in standby, press the {SLEEP} {P.STD} {MUTE} {POWER} on the remote. Method 5 With the TV in standby, press the {DISPLAY} {MENU} {MUTE} {POWER} on the remote. Method 6 With the TV in standby. On the remote, press Mute followed by 1, 1, 9, Enter in sequence. Samsung LCD Monitor Service Menu Power on the lcd monitor and open the OSD menu. Set the Brightness and Contrast to 0. Then press and hold the "SOURCE or ENTER" button for 5 second until the "SERVICE FUNCTION MENU" pop-up.
Toshiba LCD Service Menu Code
Press the {MENU} button on the remote. Highlight the "Picture" icon. Press the {9} {3} {0} {1} buttons on the remote. {OK} button will access/navigate through modes {VOL +}, {VOL-}, {P+} & {P-} buttons move through options and change values To exit, press the {MENU} button. Toshiba TV/CRT Service Menu Code Method 1 Press and hold the {MUTE} button on the remote. Then press the {MENU} button on the TV's front panel. {CH+} & {CH-} buttons select options {VOL+} & {VOL-} buttons change values To exit, turn the power off. Toshiba TV/CRT Service Menu Code Method 2 Turn the TV on. Press the {MUTE} button three times on the remote. Press the {MUTE} button again on the remote and hold. Then press the {MENU} button on the TV's front panel. Release both buttons There should be a letter "S" on the upper right of the screen. Press the {MENU} button on the TV's front panel again. {CH+} & {CH -} buttons select options {*VOL+} & {VOL-} buttons change values To exit, turn the power off. Toshiba TV/CRT Service Menu Code Method 3 Turn the TV on. Press the {MUTE} button twice on the remote. Press the {MUTE} button again on the remote and hold. Then press the {MENU} button on the TV's front panel. Release both buttons There should be a letter "S" on the upper right of the screen. Press the {MENU} button on the TV's front panel again. {CH+} & {CH -} buttons select options {VOL+} & {VOL-} buttons change values To exit, turn the power off. Toshiba TV/CRT Service Menu Code Method 4 Turn the TV on. Press the {MUTE} button on the remote. Press the {MUTE} button again on the remote and hold. Then press the {MENU} button on the TV's front panel. Release both buttons There should be a letter "S" on the upper right of the screen. Press the {MENU} button on the TV's front panel again. {CH+} & {CH -} buttons select options {VOL+} & {VOL-} buttons change values To exit, turn the power off. Toshiba TV/CRT Service Menu Code Method 5 Press and hold the {VOL -} button on the TV and the {9} button on the remote control for few seconds. {CH+} & {CH -} buttons select options {VOL+} & {VOL-} buttons change values To exit, press the {MENU} button or turn the power off.
Vizio Service Menu Instructions
Method 1 Turn The TV off. Press and hold the {CH +} & {CH -} buttons on the TV. Then press and release the {POWER} button on the TV. Release the {CH +} & {CH -} buttons. Now press the {MENU} button on the remote. You should get your regular menu up, but with a "F" in the bottom right corner of the menu (This is for factory). Press and hold the {MENU} button for few seconds. The Service Menu will be displayed. Method 2 Turn The TV off. Press and hold the {CH +} & {CH -} buttons on the TV. Then press and hold the {POWER} button on the TV. Keep all three buttons pressed for few seconds. Now press the {MENU} button on the remote. You should get your regular menu up, but with a "F" in the bottom right corner of the menu (This is for factory). Press and hold the {MENU} button for few seconds. The Service Menu will be displayed. Method 3 Press and hold the {EXIT} button on the remote for 3 seconds then release it. Then press the {1} {2} {3} buttons on the remote. To exit, press the {EXIT} button. Method 4 Press the {MENU} {2} {4} {8} {9} buttons on the remote. The Service Menu will be displayed. To exit, press the {EXIT} button. Method 5 Press the {MENU} {1} {2} {3} buttons on the remote. The Service Menu will be displayed. To exit, press the {EXIT} button.