Escolar Documentos
Profissional Documentos
Cultura Documentos
INTERNSHIP REPORT
BYCO PETROLEUM LIMITED
Submitted by:
AZKA RIZWANA SIDDIQUI
3rd Year, 5th Term
Chemical Engineering
March, 2013
Page 0
INTERNSHIP REPORT
ACKNOWLEDGEMENT
With all my regards, I pay my thanks and acknowledgments to the management
department of BYCO Petroleum Pakistan limited (BPPL). I sincerely thank Miss.
Mehreen Bashir Nawaz, Manager HR for letting me intern in BYCO oil refining
complex.
I would also like to thank Engr. Abdul Qadir, as he supervised and advised us throughout
the internship and utilizes his time on guiding and training us. I also would like to pay my
thanks and respect to Engr. Salman Azeem and Engr. Asad ullah. I also like to
acknowledge Engr. Azeem, Engr. Shams ur Rehman, Engr. Asad, Engr. M. Irfan, Engr.
Hisham Hafeez, Engr, Aamir Iqbal and others for their support and time. This highly
informative and interactive internship would have not been possible without the support
of the Management of BPPL. I would like to mention my acknowledgments to all of the
above respected peoples for giving me such an remarkable experience for my
professional career.
Page 1
INTERNSHIP REPORT
CONTENTS
1: INTRODUCTION TO BYCO PETROLEUM LIMITED:.............................................3
2: ENVIRONMENTAL HEALTH AND SAFETY:............................................................4
3: UTILITIES OF REFINERY:...........................................................................................4
3.1: WATER TREATMENT (REVERSE OSMOSIS PLANT):......................................5
3.2: BOILER:...................................................................................................................8
3.3: COOLING TOWER:..............................................................................................10
3.4: INSTRUMENT AIR:..............................................................................................10
4: INSTRUMENTATIONS, DEVICES AND SYSTEM:.................................................10
5: REFINERY:...................................................................................................................13
5.1: TYPES OF REFINERY:.........................................................................................13
6: CRUDE OIL:.................................................................................................................14
7: CRUDE DISTILLATION UNIT (CDU):......................................................................14
8: NAPHTHA HYDROTREATING:................................................................................17
9: GAS RECOVERY PLANT:..........................................................................................18
10: ISOMERIZATION UNIT:...........................................................................................20
11: REFINING PRODUCTS:............................................................................................22
Page 2
INTERNSHIP REPORT
1: INTRODUCTION TO
BYCO PETROLEUM
LIMITED:
BYCO is one of the most reputable and
highly regarded petroleum refining
industries. BYCO Petroleum Pakistan
Limited is relatively an emerging company
in the industry. From oil refining,
petroleum marketing and chemicals
manufacturing to petroleum logistics, the
group has diverse set of operations under
it. BYCO Petroleum Pakistan Limited was
incorporated in Pakistan as a public limited
company in January 1995 and was granted
the certificate of commencement of
business in March 1995.
Page 3
INTERNSHIP REPORT
EHS can be important for moral, legal, and financial reasons. All organizations have a
duty of care to ensure that employees and any other person who may be affected by the
companies undertaking remain safe at all times. Moral obligations would involve the
protection of employee's lives and health. Legal reasons for ESH practices relate to the
preventative, punitive and compensatory effects of laws that protect worker's safety and
health. ESH can also reduce employee injury and illness related costs, including medical
care, sick leave and disability benefit costs.
3: UTILITIES OF REFINERY:
The utility section in any industry is one of the most important departments as it provides
all the basic needs to the industrial processes and operations. The function of utility
section is to deliver the required help and services to run the plant and to yield the
product. The utility section generally includes:
Water
Steam
Electricity
Instrument air
Manufactured gas
Fuel
Inert air
Page 4
INTERNSHIP REPORT
Reverse osmosis occurs when the water is moved across the membrane against the
concentration gradient, from lower concentration to higher concentration. Reverse
osmosis (RO) is a membrane-technology filtration method that removes many types of
large molecules and ions from solutions by applying pressure to the solution when it is on
one side of a selective membrane. The result is that the solute is retained on the
pressurized side of the membrane and the pure solvent is allowed to pass to the other
side. The treatment of water includes:
Page 5
INTERNSHIP REPORT
level is 35000 to 39000. The both sources of water are supplied to the plant through an
open channel system.
After chemical dosing, water is given a certain time to react with the chemicals. The
water is then pumped to the DAF where all the suspended particles are scraped off from
the top of the tank by blowing air in it. Some of the quantity of water is recycled back to
DAF to attain maximum purity.
Page 6
INTERNSHIP REPORT
3.1.7: ELECTRODEIONIZATION:
The water is then flowed to electrodeionization filter, where at 25 volts of current, the
TDS of water is minimized to 0ppm, recovering 99% of permeate. The salts are split into
its ions and moves towards their respective electrodes when current are applied, giving up
100% purified water.
R.W
Tank Reject Reject Reject
Page 7
INTERNSHIP REPORT
3.2: BOILER:
A boiler is a closed vessel used to heat the water or other fluid for use in other operations
and process. Generally boilers are used to generate steam for the usage of plants. There
are two types of boiler, Fire Tube Boilers and Water Tube Boilers. When water is in the
boiler drum and fire is in tubes to vaporize the water, the boiler is named as fire tube
boiler. Likewise when the water is in tubes and fire is around the tubes in boiler drum, the
boiler is said to be a water tube boiler.
Page 8
INTERNSHIP REPORT
3.2.3: ECONOMIZER:
Economizer is a mechanical device used to minimize energy consumption by reusing the
left heat to preheat a fluid. In boilers, economizers are heat exchange devices that heat
fluids, usually water, up to but not normally beyond the boiling point of that fluid.
Economizers are so named because they can make use of the enthalpy in fluid streams
that are hot, but not hot enough to be used in a boiler, thereby recovering more useful
enthalpy and improving the boiler's efficiency. They are a device fitted to a boiler which
saves energy by using the exhaust gases from the boiler to preheat the cold water used to
fill it. High pressure boiler feed water pump pumped water to the economizer at 65 bar
pressure at 140°C to the economizer. Here the flue gases at 350°C exchanges their heat to
steam and leaving to the stack at 160°C. The temperature
of steam is elevated to 190°C.
Flue gases
Econo Steam drum Super
D.M.W HP
Deaerator mizer heater
HP steam
Mud drum
Page 9
INTERNSHIP REPORT
Page 10
INTERNSHIP REPORT
A number of instruments are used to run, monitor and manage the process. These are:
4.1: PUMPS:
Pump is a device that raises, transfers, delivers, or compresses fluids or that attenuates
gases especially by suction or pressure or both.
4.2: COMPRESSOR:
A gas compressor is a mechanical device that increases the pressure of a gas by reducing
its volume. Compressors are similar to pumps: both increase the pressure on a fluid and
both can transport the fluid through a pipe. As gases are compressible, the compressor
also reduces the volume of a gas. Liquids are relatively incompressible; while some can
be compressed, the main action of a pump is to pressurize and transport liquids.
4.3: VALVES:
A valve is a device that regulates, directs or controls the flow of a fluid (gases, liquids,
fluidized solids, or slurries) by opening, closing, or partially obstructing various
passageways. Valves may be operated manually, either by a handle, lever, pedal or wheel.
Valves may also be automatic, driven by changes in pressure, temperature, or flow.
4.4: TRANSMITTERS:
An electronic device that generates and amplifies a carrier wave, modulates it with a
meaningful signal derived from speech or other sources, and radiates the resulting signal
from an antenna. These transmitters are used to measure pressure difference, velocity,
flow area, temperature and other major specifications to either monitor or control
processes.
4.5: TURBINES:
A turbine is a rotary mechanical device that extracts energy from a fluid flow and
converts it into useful work.
Page 11
INTERNSHIP REPORT
4.7: REBOILER:
Reboilers are heat exchangers typically used to provide heat to the bottom of
industrial distillation columns. They boil the liquid from the bottom of a distillation
column to generate vapors which are returned to the column to drive the
distillation separation.
4.8: FURNACE:
An industrial furnace or direct fired heater is equipment used to provide heat for a
process or can serve as reactor which provides heats of reaction. Fuel flows into
the burner and is burnt with air provided from an air blower. The flames heat up the
tubes, which in turn heat the fluid inside in the first part of the furnace known as the
radiant section or firebox. In this chamber where combustion takes place, the heat is
transferred mainly by radiation to tubes around the fire in the chamber. The heating
fluid passes through the tubes and is thus heated to the desired temperature. The gases
from the combustion are known as flue gas. After the flue gas leaves the firebox, most
furnace designs include a convection section where more heat is recovered before venting
to the atmosphere through the flue gas stack.
4.9: FAN:
A mechanical fan is a machine used to create flow within a fluid, typically a gas such
as air. The fan consists of a rotating arrangement of vanes or blades which act on the air.
The rotating assembly of blades and hub is known as an impeller. Fans produce air flows
with high volume and low pressure (although higher than ambient pressure), as opposed
to compressors which produce high pressures at a comparatively low volume.
4.10: DRIER:
A drier (dryer) is a process, in which moisture or water is removed from the fluid or other
substances by the application of either some mechanical treatment or by some chemical
treatment.
4.11: BLOWER:
A blower is a machine for moving volumes of a gas (air) with moderate increase of
pressure.
Page 12
INTERNSHIP REPORT
4.12: CONDENSER:
A condenser is a device or unit used to condense a substance from its gaseous to
its liquid state, typically by cooling it. In so doing, the latent heat is given up by the
substance, and will transfer to the condenser coolant.
5: REFINERY:
An oil refinery or petroleum refinery is an industrial process plant where crude oil is
processed and refined into more useful products such as petroleum
naphtha, gasoline, diesel fuel, asphalt base, heating oil, kerosene, and liquefied petroleum
gas.
5.1.2: HYDROSKIMMING:
The hydro skimming refinery is equipped with Atmospheric Distillation, naphtha
reforming and necessary treating processes. This type of refinery is more complex than a
topping refinery and it produces gasoline.
5.1.3: CRACKING:
The cracking or hydro cracking refinery, in addition to hydro skimming refinery, is
equipped with vacuum distillation and catalytic cracking. The cracking refinery adds one
more level of complexity to the hydro skimming refinery by reducing fuel oil by
conversion to light distillates and middle distillates.
5.1.4: COKING:
The coking refinery is equipped to process the vacuum residue into high value products
using the Delayed Coking Process. The coking refinery adds further complexity to the
cracking refinery by high conversion of fuel oil into distillates and petroleum coke.
5.1.5: INTEGRATED:
The integrated refinery is equipped to upgrade its LPG or Naphtha into basic
petrochemicals by way of aromatics production of Benzene, Cyclo Hexene, Meta Xylene,
Ortho Xylene, Para Xylene and Toluene or Naphtha cracking.
Page 13
INTERNSHIP REPORT
6: CRUDE OIL:
Petroleum is a naturally occurring flammable liquid consisting of a complex mixture
of hydrocarbons of various molecular weights and other liquid organic compounds, that
are found in geologic formations beneath the Earth's surface.
The crude oils used in BYCO oil refining complex are UMM SHAIF and UPPER
ZAKUM. The quality of crude oil mostly depends upon its viscosity and sulfur content.
The higher the sulfur content, the sour the crude will be, likewise the lower the sulfur
content, the sweet the crude will be.
Page 14
INTERNSHIP REPORT
DESALTER: A desalter is a process unit on an oil refinery that removes salt from
the crude oil. The salt is dissolved in the water in the crude oil, not in the crude oil itself .
As the raw crude oil arriving contains quite a bit of water and salt, it is normally sent for
salt removing first, in desalter. The crude is mixed with a water stream and intense
mixing takes place over a static mixer. The desalter, a large liquid full vessel, uses an
electric field to separate the crude from the water droplets. It operates best at 120 -
150 0C, hence it is conveniently placed somewhere in the middle of the preheat train.
7.2.2: DISTILLATION:
From the furnace, the feed is then introduced into the atmospheric distillation column
having 37 trays, at 30 psig and 710°F. Under these parameters, the crude is vaporized,
releasing all the other components to their specific boiling point. To attain maximum
refining, steam is injected from the bottom which strips out light materials from the
heavier ones. There are two zones in a distillation column, rectifying zone and stripping
zone.
RECTIFYING ZONE: The rectifying zone is a name given to the section above the
feed point, where the concentration of more volatile component increases in both the
liquid and the vapor.
STRIPPING ZONE: The stripping zone is a section below the feed point, where the
concentration of volatile component decreases in both the liquid and the vapor.
Five fractions are obtained from the distillation. These five are:
NAPHTHA: Naphtha is carried out from the top of distillation column and is condensed
and collected in the storage tank for further processing.
KEROSENE: After naphtha, the first side stream withdrawn from the column is
kerosene. Some of its fraction is stripped back to the column to remove the other lighter
fractions. Kerosene is then cooled by exchanging its heat to the feed in preheater,
processed and stored as a final product.
LIGHT GAS OIL (LGO): The second side stream obtained is LGO, after some of its
fraction is stripped back to remove lighter fractions. LGO is then cooled by exchanging
Page 15
INTERNSHIP REPORT
its heat to the feed in preheater. It is then pumped to the hydrotreater for sulfur removal
and then stored as a product in storage tank.
HEAVY GAS OIL (HGO): The third side stream of column is of HGO, some of which
is also stripped back through strippers to remove the lighter fractions. HGO is also then
directed to the preheater to exchange its heat to the feed and is then mixed with the
reduced crude oil.
REDUCED CRUDE OIL: The reduced crude oil is fractioned out from the bottom of
the column and is cooled by preheaters and coolers. The reduced crude oil and HGO are
mixed together and is then pumped to vacuum distillation column for further distillation
under other conditions.
NAPHTHA
CRUDE OIL
DISTILLATION
COLUMN
KEROS
ENE
PREH
EATE
FURNACE
R
LGO
PREH
PREH
EATE
EATE
R
R
PREH PREH
EATE HGO
EATE
R R
DESALTER PREH
EATE
R
REDUCED CRUDE OIL
Page 16
INTERNSHIP REPORT
8: NAPHTHA HYDROTREATING:
Hydro treating is a catalytic chemical process widely used to remove sulfur from natural
gas and from refined petroleum products. The purpose of removing the sulfur is to reduce
the sulfur dioxide (SO2) emissions that result from using those fuels. Another important
reason for removing sulfur from the naphtha streams within a petroleum refinery is that
sulfur, even in extremely low concentrations, poisons the noble metal catalysts
(platinum and rhenium) in the catalytic reforming.
8.1.2: REACTOR:
The heated feed is introduced into the catalyst bed reactor. The catalyst used in reactor is
generally alumina base impregnated with cobalt and or a combination
Page 17
INTERNSHIP REPORT
of nickel and molybdenum. The mixture flows downward through the catalytic bed and
hydrogen reacts with sulfur, nitrogen, oxygen, halides and other metallic components
present in naphtha, forming hydrogen sulfides, ammonia, water, hydrogen halides etc. at
that temperature, the olefins present in naphtha becomes saturated, leaving a rather
purified form of feed for gas recovery plant.
8.1.3: SEPARATION:
The product from the reactor is firstly cooled by heat exchange with fresh feed and then
by air coolers and then flows into product separator, where liquid flows through the gas
plant for splitting further while gases to the distillate hydrotreater.
GASES
NAPHTHA
Page 18
INTERNSHIP REPORT
9.1.1: NAPHTHA:
Naphtha from the hydro treater plant enters the gas recovery plant to be fractioned
further.
9.1.2: DE-ETHANISER:
The feed is then introduced in the de-ethaniser column containing 30 trays from the top at
190 psig and 350°F. When the feed enters the column, light hydrocarbons flashes off and
rises up the column and is drawn off from there and cooled for using as a fuel in refinery
furnace. The bottom containing the remaining fractions is then pumped to de-butaniser.
9.1.3: DE-BUTANISER:
The bottom of de-ethaniser column is then flowed in to the de-butaniser having 24 trays,
at 146 psig and 400°F. Feed enters from the top bottom of the column where propane and
butane are vaporized to flow up the column and is cooled and condensed. The overhead
product is firstly washed by gas absorption method by the solution of mono ethanol
amine to remove hydrogen sulfide and other sulfur components. The mixture of propane
and butane are then stored as a market product.
9.1.4: DE-ISOHEXANISER:
The bottom of de-butaniser is introduced into de-isohexaniser containing 70 trays, at 50
psig and 350°F as the boiling points of i-hexane and n-hexane are very close (140°F and
156°F). Feed from the bottom is flashed into and pentanes and iso-hexanes are taken
overhead, condensed and stored. Some of the part of the overhead is refluxed back to
maintain the purity and parameters of the column.
A
LPG I-HEXANE
BS
D
O
ETHANE/METHANE PROPANE/BUTANE E
RP
-
TI
I
O
S
N
D D O
C
E- E H
O
E - E
L
T B X
U
H U A
M
A T N
N
NI A I
S N S
E I E
R S R
E
R
HYDROGEN SULFIDE
NAPHTHA
HEAVY
NAPHTHA
Page 19
INTERNSHIP REPORT
Page 20
INTERNSHIP REPORT
then moved to the next reactor, where isomerization is occurred and n-paraffin is
converted into i-paraffin by the help of catalytic bed in the reactor.
The hot stream is then passed through heat exchanger giving out its heat to the fresh feed
and then is routed to the stabilizer column. The purpose of stabilizer is to separate any
dissolved hydrogen, HCl and cracked gases from isomerate. The overhead vapor of
stabilizer is cooled and stored in stabilizer receiver. The bottom product of stabilizer is
routed to Molex unit by passing through coolers. The stabilizer off gas flows up gush
through the stabilizer gas scrubber to remove hydrogen chloride by showering caustic
from the top of the tower. GAS TO FUEL
REACTOR 2
REACTOR 1
CUASTIC TO KERO WASH
PARAFFINS
ROTARY VALVE: A rotary valve is a type of valve in which the rotation of a passage or
passages in a transverse plug regulates the flow of liquid or gas through the attached
pipes. At one time two streams is entering the chamber are the feed and desorbent.
Extract and raffinate exit the chamber. A pump around stream continually circulates from
the pump around pump to the top of the chamber, through the chamber and back to the
pump.
ADSORBENT CHAMBER: The adsorbent chamber has eight separate beds. The
adsorbent material in the beds traps normal paraffins from the charge in its pores. Other
hydrocarbons are not of a suitable shape to fit in the pores. Normal paraffins in the charge
displace desorbent from the pores and the resulting raffinate goes back to the rotary valve
and then to the raffinate mixing drums. The adsorbent in the bed is recharged by
desorbent that the valve switches to the bed. The desorbent displaces normal paraffins
Page 21
INTERNSHIP REPORT
due to a higher concentration of butane and resulting extract goes back to the rotary valve
and then to the extract mixing drum. Liquid flow in the adsorbent chamber is always
downwards.
DESORBENT
A
D E
FEED SURGE S X R
VESSEL O T A
R R F
ROTARY VALVE B A F
E C I
CHLORIDE
N T N
GUARD BED
T A
C T
C O E
DESORBENT L
H
A U C
M M O
B N L
E U
R M
N
EXTRACT RAFFINATE
EXTRACT: The extract contains the extracted n-paraffins and desorbent, leaves for the
extract column. The extract line enters the extract column. The lighter desorbent
components are taken overhead in the extract column receiver and are pumped to storage
tank for reuse. The extract containing n-paraffins are recycled back to Penex unit for
conversion into iso-paraffins.
RAFFINATE: The raffinate, containing the higher octane non-normal paraffins and
desorbent, leaves the chamber to the raffinate column. The raffinate column sends the
lighter desorbents components overhead and drops the non-normals out the column
bottom. The raffinate is cooled in the heat exchanger and stored in the tank.
Page 22
INTERNSHIP REPORT
CRUDE ANALYSIS
UMM SHAIF UPPER ZAKUM
Fractions Wt% Vol% Wt% Vol%
Gas/LPG 3.39 3.81 4.42 5.61
Light naphtha 8.68 10.49 7.6 9.48
Heavy naphtha 6.37 7.16 5.05 5.84
Kerosene 18.31 19.53 14.67 15.97
Gas oil 25.90 21.64 21.88 22.00
Residue 34.63 37.37 46.38 41.10
100.00 100.00 100.00 100.00
Page 23