Escolar Documentos
Profissional Documentos
Cultura Documentos
FOR HELP OR ADVISE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR, 05618 & 05619
OR SIP DIRECTLY ON:
TEL: 01509500400
EMAIL: sales@sip-group.com or technical@sip-group.com
www.sip-group.com Please read and fully understand the instructions in
this manual before operation. Keep this manual
Ref: 280213 safe for future reference
16 1
Declaration of Conformity
We
EN 55014-1:2006
EN 55014-2:1997+A1
EN 61000-3-2:2006
EN 61000-3-3:1995+A1+A2
EN 60335-1:2002+A1+A11+A12+A2+A13
EN 60335-2-80:2003+A1+A2
EN 62233:2008
Signed: …………………………………...
Mr P. Ippaso - Managing Director - SIP (Industrial Products) Ltd
Date: 04/01/2013.
2 15
14 3
SAFETY INSTRUCTIONS
IMPORTANT: Please read the following instructions carefully, failure to do so could
lead to serious personal injury and / or damage to the fan.
When using your ventilator fan, basic safety precautions should always be followed to
reduce the risk of fire, electric shock, personal injury and / or damage to the fan.
Read all of these instructions before operating the fan and save this user manual for
future reference.
The fan should not be modified or used for any application other than that for which it
was designed; It was designed to safely and quietly move air in large volumes.
If you are unsure of its relative applications do not hesitate to contact us and we will
be more than happy to advise you.
Before operating the fan always check no parts are broken, that all screws are com-
pletely tight and that no parts are missing.
KNOW YOUR FAN: Read and understand the owner's manual and labels affixed to the
fan. Learn its applications and limitations, as well as the potential hazards specific to it.
DO NOT USE THE FAN IN DANGEROUS ENVIRONMENTS: Do not use your fan in damp or
wet locations, or expose it to rain. Always provide adequate space around the ventila-
tor fan.
STAY ALERT: Always watch what you are doing and use common sense when placing
and operating the fan.
DISCONNECT THE FAN FROM THE MAINS SUPPLY: When not in use.
NEVER LEAVE THE FAN UNATTENDED: During operation.
4 13
DANGER! Check that the fan is in sound condition and good working order. Take im-
mediate action to repair or replace damaged parts.
WARNING! Only operate on a level and stable surface.
WARNING! Do not allow untrained persons to operate the fan and do not operate
the fan without all covers etc. correctly fitted.
WARNING! RISK OF ELECTRIC SHOCK. Do not expose the fan to water spray, rain,
dripping water or moisture of any kind.
Do not leave the machine unattended when in use. Switch the machine off and
unplug from the mains supply before leaving the work area.
Do not allow children or animals near the ventilator fan, particularly when in use.
Ensure that the ventilator fan is correctly turned off when not in use and store in a
safe, dry area, out of reach of children.
Keep all combustible materials away from this ventilator fan.
Never stand on the fan.
DO NOT dismantle, modify or tamper with the fan, this may be dangerous and will
invalidate the warranty.
Use only the electrical power (voltage and frequency) specified on the model plate
of the ventilator fan. If in doubt contact the manufacturer.
Use only a three-prong, grounded outlet.
Do not touch the fan when your hands are wet.
Those who are not qualified electricians should not disassemble, repair or rebuild the
fan.
DO NOT unplug the fan by holding the cable cord; Unplug by holding the plug.
DO NOT use the fan when there is damage to the cable cord or plug.
DO NOT use the fan close to fires.
To reduce the risk of fire or electric shock, do not use this fan with any solid-state
speed control device.
12 5
If a problem with the ventilator fan is experienced, or if the mains lead or plug be-
come damaged, contact your distributor for repair. PARTS LIST
If the fan is used in a place of work all rules and laws etc. relating to the use of porta-
ble electrical appliances should be followed.
10" Ventilator Fan 12" Ventilator Fan
No. Description SIP Part No. SIP Part No.
1 Guard PW10-00010 PW10-00017
2 Fan blade PW10-00011 PW10-00018
CAUTION: The warnings and cautions mentioned in this user manual can not cover all possi-
ble conditions and situations that may occur. It must be understood by the operator that 3 Motor support PW10-00012 PW10-00019
common sense and caution are factors which cannot be built into this product, but must be 4 Motor PW10-00012 PW10-00019
applied. 5 Casing PW10-00013 PW10-00020
6 Handle PW10-00014 PW10-00014
7 Switch PW10-00015 PW10-00015
ELECTRICAL CONNECTION 8 Rubber foot PW10-00016 PW10-00016
N/A Capacitor PW10-00037 PW10-00040
WARNING! It is the responsibility of the owner and the operator to read, understand
and comply with the following:
You must check all electrical products, before use, to ensure that they are safe.
You must inspect power cables, plugs, sockets and any other connectors for wear or
damage.
You must ensure that the risk of electric shock is minimised by the installation of appro-
6 11
Note: For best performance, the maximum hose length for each ventilator
is 10 metres.
The wires for the plug are coloured in the following way:
Toggle switch
Yellow / green Earth
Blue Neutral
Brown Live
As the colours of the wires may not correspond with the markings in your plug, pro-
ceed as follows: The wire which is coloured blue, must be connected to the terminal
marked with N or coloured black. The wire which is coloured brown, must be connect-
ed to the terminal, which is marked L or coloured red. The wire which is coloured yel-
Fig. 1
Fig. 2 low / green should be connected to the terminal which is coloured the same or
marked
Always secure the wires in the plug terminal carefully and tightly. Secure the cable in
the cord grip carefully.
Note: Always ensure the mains supply is of the correct voltage and the cor-
rect fuse protection is used. In the event of replacing the fuse always re-
Never: Always be aware of the direction of air flow.
place the fuse with the same value as the original.
10 7
Note: If an extension lead is required in order to reach the mains supply; 1x Ventilator fan.
ensure that this too is rated for the correct voltage and fuse rating. 1x Instruction Manual.
Note: The cross section of the extension lead should be checked so that it is
of sufficient size so as to reduce the chances of voltage drops.
Note: If any of the above are missing or damaged, contact your distribu-
tor immediately.
TECHNICAL SPECIFICATION
Item No. 05618 05619
Supply 230v 50Hz 230v 50Hz
Power 240 watts 350 watts GETTING TO KNOW YOUR VENTILATOR FAN
Fan Ø 240mm 275mm
Hose Ø (optional) 10” (254mm) 12" (305mm)
A B
No. of Speed Settings 2 2
Speed - Setting 1 2650 rpm (approx.) 2650 rpm (approx.)
Speed - Setting 2 2775 rpm (approx.) 2775 rpm (approx.)
Air Flow - Maximum 45m³/Min 63m³/Min
Protection IP4X IP4X
GUARANTEE E
Guarantee:
This SIP ventilator fan is covered by a 12 month parts and labour warranty covering
failure due to manufacturers defects. This does not cover failure due to misuse or op-
erating the fan outside the scope of this manual - any claims deemed to be outside
the scope of the warranty may be subject to charges Including, but not limited to D
parts, labour and carriage costs. Consumables items such as fuses are not covered C
by the warranty.
In the unlikely event of warranty claims, contact your distributor as soon as possible.
Proof of purchase will be required before any warranty can be honoured. Ref. Description Ref. Description
A Carry handle D Fan blade
B Selector toggle switch E Grill
Note: Proof of purchase will be required before any warranty can be hon-
oured. C Foot
8 9