Escolar Documentos
Profissional Documentos
Cultura Documentos
LS 26500
Benefits
Cell size references C
l
High voltage response, stable
during most of the lifetime of the Electrical characteristics
application (typical values relative to cells stored for one year or less at + 30°C max.)
l
Wide operating temperature
range (- 60°C/+ 85°C) Nominal capacity 7.7 Ah
(at 4 mA + 20 °C 2.0 V cut-off. The capacity restored by the cell varies
l
Low self-discharge rate according to current drain, temperature and cut-off)
(less than 1 % after 1 year of
Open circuit voltage (at + 20°C) 3.67 V
storage at + 20°C)
Nominal voltage (at 0.5 mA + 20°C) 3.6 V
l
Easy integration into compact
systems Nominal energy 27.72 Wh
l
Superior resistance to Pulse capability: Typically up to 300 mA
atmospheric corrosion (300 mA/0.1 second pulses, drained every 2 mn at + 20°C from undischarged cells with 10 µA
base current, yield voltage readings above 3.0 V. The readings may vary according to the pulse
characteristics, the temperature, and the cell’s previous history. Fitting the cell with a capacitor
Key features may be recommended in severe conditions. Consult Saft)
l Stainless steel container Maximum recommended continuous current 150 mA
and end caps (Higher currents possible, consult Saft)
(low magnetic signature) Storage (recommended) + 30°C (+ 86°F) max
l Hermetic glass-to-metal sealing (for more severe conditions, consult Saft)
May 2010
LS 26500 3.6
Voltage plateau versus Current and Temperature (at mid-discharge)
3.6
3.6
3.5
3.5
3.5 + 70ºC
Ø 25.8 ± 0.2 3.4 +
+ 70ºC
70ºC
3.4
3.4
Current (mA)
Ø 18.0 ± 0.2
(on flat surface)
Typical discharge profiles at + 20°C
Finished version with
protruding positive end cap 3.9
3.9
3.9
Ø 25.8 ± 0.2 3.7
3.7
3.7
Ø 13.4 ± 0.2 3.5
3.5
Cell voltage (V)
mA
3.3
3.3
mA
mA
mA
mA
3.1
mA
mA
mA
3.1
Ohms/0.7
mA
mA
3.1
mA
Ohms/0.7
mA
Ohms/0.7
Ohms/14
Ohms/125
2.9
Ohms/14
Ohms/125
2.9
Ohms/35
Ohms/14
Ohms/125
2.9
Ohms/35
0.8 ± 0.2
Ohms/35
2.7
2.7
2.7
2.5
2.5
5000
2.5
5000
250
48.7 ± 0.5 2.3
5000
250
75
25
2.3
250
2.3
75
25
75
25
2.1
2.1
2.1
0.4 1.9
1.9
1.90.01 0.1 1 10 100 1000 10000 100000
0.01
0.01 0.1
0.1 1
1 10
10 100
100 1000
1000 10000
10000 100000
100000
Time (hours)
Ø 18.0 ± 0.2
(on flat surface)
Finished version with Restored Capacity versus Current and Temperature (2.0 V cut-off)
flat positive end cap
Dimensions in mm.
7.0
7.0
7.0
Storage 6.0
Capacity (Ah)
6.0
6.0
+ 70ºC
+
+ 70ºC
l
The storage area should be clean, 5.0 70ºC
5.0
5.0
cool (preferably not exceeding
4.0
+ 30°C), dry and ventilated. 4.0
4.0 + 20ºC
+
+ 20ºC
20ºC
3.0
Warning 3.0
3.0 - 20ºC
- 40ºC -- 20ºC
20ºC
l
Fire, explosion and severe burn 2.0 -- 40ºC
40ºC
2.0
2.0
hazard.
1.0
l
Do not recharge, short circuit, 1.0
1.0 1 10 100 1000
1
1 10
10 100
100 1000
1000
crush, disassemble, heat above Current (mA)
100°C (212°F), incinerate,
or expose contents to water.
l
Do not solder directly to the cell
(use tabbed cell versions instead).