Escolar Documentos
Profissional Documentos
Cultura Documentos
FEEDER PILLARS, FUSE LINKS, ARC FLASH, CABLE ROLLERS, CUT- OUTS
Scotchcast™ 2130
Electrical Insulating Resin
Data Sheet
Product Description Applications Adhesion to portable cable jacket
materials:
3M™ Scotchcast 2130 Electrical To replace or repair the jacket on both Neoprene 45 psi (3,2 Kg/cm2)
Insulating Resin is a special flame- single and multi-core power cables and Hypalon 45 psi (3,2 Kg/cm2)
retardant, two-part, polyurethane resin particularly where flexibility is required. Nitrile/PVC 40 psi (2,8 Kg/cm2)
that is designed to replace the cable PVC 40 psi (2,8 Kg/cm2)
jacket when splicing or repairing mine To insulate between the conductors of EPDM 10 psi (0,7 Kg/cm2)
and portable cables. Its unique formu- multi-core splices operating at 1000 Urethane (itself) 45 psi (3,2 Kg/cm2)
lation makes it particularly suited to volts or less.
withstand the rugged conditions under Adhesion to metals:
To seal the crotch or sheath when Steel 35 psi (2,5 Kg/cm2)
which mine and portable cables must terminating multi-core cables.
operate. Scotchcast 2130 is also used Aluminum 35 psi (2,5 Kg/cm2)
as the insulating material for cable Copper 35 psi (2,5 Kg/cm2)
splices operating at 1000 volts or less 3M Test Method
and is rated for continuous use at 194ºF
Physical Properties
(90ºC) with an overload rating of 266ºF
(130ºC). Scotchcast 2130 conforms to Color Black
MSHA CFR 30 Part 18.64. Electrical Properties
Hardness Dielectric Strength 450 v/mil
Scotchcast 2130 is packaged in the ASTM D-2240 80 Shore A ASTM D-149 (17,7 Kv/mm)
convenient 3M two-part Unipak bag.
The contents of the Unipak bag are: Density 0.766 oz/in3 Dielectric Constant (60 Hz)
(1,32 g/cm3) ASTM D-150
Size B 7.6 oz (216 gms)
73ºF (23ºC) 4.6
10.7 cu. in. (175,3 cu. cm.) Tensile Strength 845 psi 140ºF (60ºC) 4.9
Size C 21.7 oz (616 gms) ASTM D-412 (59,4 Kg/cm2) 194ºF (90ºC) 5.4
30.5 cu. in. (500 cu. cm.)
Elongation Dissipation Factor (60 Hz)
ASTM D-412 175% ASTM D-150
Resin Features: 73ºF (23º) 3.8%
Glass Transition Temperature 140ºF (60ºC) 4.9%
• Flame retardant (by DTA) 3M Test Method -112ºF 194ºF (90ºC) 7.5%
• Bonds to all modern cable jackets (-80ºC)
• Bonds to itself Maximum Exotherm (100g) 144ºF This data is not to be used for
3M Test Method (62ºC) specifications. Values listed are for
• Tough yet flexible
typical properties and should not be
• Unipak container for mixing and Gel Time considered minimum or maximum.
pouring @ 73ºF (23ºC) 15 min.
IMPORTANT NOTICE
All statements, technical information and recommendations related to the Seller's products are based on information believed to be reliable,
but the accuracy or completeness thereof is not guaranteed. Before utilizing the product, the user should determine the suitability of the
product for its intended use. The user assumes all risks and liability whatsoever in connection with such use.
Any statements or recommendations of the Seller which are not contained in the Seller's current publications shall have no force or effect
unless contained in an agreement signed by an authorized officer of the Seller. The statements contained herein are made in lieu of all
warranties, expressed or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose
which warranties are hereby expressly disclaimed.
SELLER SHALL NOT BE LIABLE TO THE USER OR ANY OTHER PERSON UNDER ANY LEGAL THEORY, INCLUDING BUT NOT
LIMITED TO NEGLIGENCE OR STRICT LIABILITY, FOR ANY INJURY OR FOR ANY DIRECT, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES SUSTAINED OR INCURRED BY REASON OF THE USE OF ANY OF THE SELLER'S PRODUCTS.