Escolar Documentos
Profissional Documentos
Cultura Documentos
1. SET is an alternative NIC Teaming solution that you can use in environments that include Hyper-V and
the Software Defined Networking (SDN) stack.
SET allows you to group several physical Ethernet network adapters into one or more software-based
virtual network adapters. These virtual network adapters provide fast performance and fault tolerance
in the event of a network adapter failure.
Use Windows PowerShell commands and Remote Desktop connections to manage SET from remote
computers
Group between one and eight physical Ethernet network adapters into one or more software-based
virtual network adapters
2. Which one of the following groups has permission to shut down a domain controller?
All of these
Backup Operators
Server Operators
Print Operators
3. Your IT company is constantly changing, with new users coming and going throughout the year. One
of your common tasks requires the deletion of user accounts for employees who have left the company.
LDIFDE
Dsmod
Dspromo
Netsh
4. You want to boot a Linux Operating System with the Secure Boot option enabled in a virtual machine.
This will be the first time you boot the OS. What must you do?
Configure the virtual machine to use the Microsoft UEFI Certificate Authority
5. Complete the missing word from the sentence below that is describing one of the roles in Server
2016:
By using___ , you can augment an organization security strategy by protecting information through
persistent usage policies, which remain with the information, no matter where it is moved
ADFS
RODC
ADLDS
AD RMS
6. Which of the following reasons justifies why you should audit failed events?
To monitor for malicious attempts to access a resource which has been denied
To monitor access that would suggest users are performing actions greater than you had planned
None of these
7. Is the following statement about Hyper-V true or false? Hyper-V does not support wireless networks
False
True
None
None
8. RODC comes with a number of features that focus on heightened security with limited functionality to
remote office users. Which of the following are features of RODC?
Read-only DNS
Unidirectional Replication
All of these
9. Hyper-V Replica is an integral part of the Hyper-V role. It contributes to your disaster recovery
strategy by replicating VMs from one Hyper-V host server to another to keep your workloads available.
Primary and secondary host servers can be in separate geographical locations with replication over a
WAN link.
10. You are using Sysprep.exe to prepare a system for imaging. You want to enable end users to
customize their Windows operating system, create user accounts, name the computer, and perform
other tasks.
/generalize
/oobe
/audit
/unattend
11. You purchase a new desktop computer that has four external USB hard drives. You want to create a
single volume by using the four USB drives. You want the volume to be expandable, portable, and
resilient in the event of failure of an individual USB hard drive. You need to create the required volume.
What should you do?
Create a new Storage Space across 4 USB hard drives and set resiliency type to three-way mirror
Create a new Storage Space across 4 USB hard drives and set resiliency type to parity
12. When Bob logs onto the Data folder, what will his Local and Remote permissions be?
13. You deploy a Hyper-V server in an isolated test environment. The test environment is prevented
from accessing the Internet. The new server runs the Datacenter edition of Windows Server 2016.
You plan to deploy the following guest virtual machines on the server:
What activation model will you use for the virtual machines?
14. To put an image into a container, you use the “docker run” command with which one of the
following?
The Image ID
The image IP
15. What new Windows Server 2016 feature optimizes failover cluster by identifying Hyper-V nodes that
are hosting a disproportionate number of VMs and redistributing the VMs to other nodes?
Node equality
Node fairness
Node justice
Node parity
16. Which of the following is NOT true about installing WSUS on Server 2016?
17. You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has a dynamically
expanding virtual hard disk (VHD) file that is 900 GB The VHD contains 400 GB of free space. You need to
reduce the amount of disk space used by the VHD. What should you run?
18. Your network contains an Active Directory forest. You install Windows Server 2016 on 10 virtual
machines. You need to deploy the Web Server (IIS) server role identically to the virtual machines.
Solution: You use Windows PowefShell Desired State Configuration (DSC) to create a default
configuration and then you apply the configuration the virtual machines.
No
None
None
19. You have a Nano Server named Nano1. Which cmdlet should you use to identify whether the DNS
Server role is installed on Nano1?
Find-NanoServerPackage
Get-Package
Find-Package
Get-WindowsOptionalFeature
20. You are configuring a Windows Server 2016 failover cluster in a workgroup. Before installing one of
the nodes, you run the ipconfig /all command and receive the following output
You need lo ensure that Server1 can be added as a node in the cluster. What should you do1?
21. You are a server administrator at a company named Contoso, Ltd. Contoso has a Windows Server
2016 Hyper-V environment configured as shown in the following table.
All of the virtual switches are of the external type. You need to ensure that you can move virtual
machines between the hosts without causing the virtual machines to disconnect from the network.
22. You need to ensure that VM1 and VM2 can communicate with each other only. The solution must
prevent VM1 and VM2 from communicating with Server1. Which cmdlet should you use to acomplish
this?
Set-NetNeighbor
Remove-VMSwitchTeamMember
Set-VMSwitch
Enable-VMSwitchExtension
23. You have a Windows Server 2016 Hyper-V failover cluster that contains two nodes named Node1
and Node2. On Node1, you create a virtual machine named VM01 by using Hyper-V Manage. You need
to configure High Availability on VM01 ie to move to Node2 automatically if Node1 becomes
unavailable.
From Hyper-V Manager Click Node 1 and the modify the hyper-V settings.
24. You have a server named Server1 that runs Windows Server 2016. Server1 hosts a line-of- business
application named App1. App1 has a memory leak that occasionally causes the application to consume
an excessive amount of memory. You need to log an event in the Application event log whenever App1
consume more than 4 GB of memory.
Yes
No
Maybe
None
25. You have a server named Server1 that runs Windows Server 2016. You install the Docker daemon on
Server1. You need to configure the Docker daemon to accept connections only on TCP port 64500. What
should you do?
26. You have an Active Director domain named Contoso.com. The domain contains servers named
Server1, Server2 and Server3 that run Windows Server 2016. Server1 and Server2 are nodes in a Hyper V
cluster named Cluster1. You add a Hyper V Replica Broker role named Broker 1 to Cluster1. Server3 is a
Hyper-V server. A virtual machine named VM1 runs on Server3. Live Migration is enabled on all three
servers and it is configured to use Kerberos authentication only. You need to ensure that you can
perform the migration of VM1 to Server2.
Add the Server3 computer account to the Replicator group on Server1 and Server2
27. You have a server named Server 1 that runs Windows Server 2016. The disk configuration for Served
is shown in the exhibit.You add Server1 to a cluster. You need to ensure that you can use Disk1 (or
Storage Spaces Direct).
28. You have a server that runs Windows Server 2016. The server contains a storage pool named Pool1.
Pool1 contains five physical disks named Disk1, Disk2, Disk3, Disk4 and Disk5. A virtual disk named
VirtualDisk1 is stored in Pool1. VirtualDisk1 uses the panty storage layout Disk3 fails. You need to
remove Disk3 from Pool1.
Which two commands should you run? The correct answer presents part of the solution.
Update-StoragePool-FriendlyName Pool1
Reset-PhysicalDisk-FriendlyName Disk3
Set-ResillencySetting-StoragePool Pool1-PhysicalDiskRedundancyDefault 4
29. This question is part of a series of 5 questions that use the same similar answer choices. An answer
choice may be correct for more than one question in the series. Each question is independent of the
other questions in this series. Information and details provided in a question apply only to that question.
You have three servers named Server1, Server2, Server3 that run Windows Server 2016.
Server1 and Server2 have the Hyper-V server role installed. Server3 has the iSCSI Target Server role
service installed.
You need to create a Hyper-V cluster. Which tool should you use first?
30. An iSCSI SAN connects to the network. You create a LUN on the SAN and configure both servers to
connect to the iSCSI target server. You create a failover cluster and add Server1 and Server2 to the
cluster. You connect both servers to the iSCSI target and format the shared storage. You need to add the
shared storage to the cluster. The solution must ensure that virtual machines running on both nodes can
access the shared storage simultaneously.
31. Your new task is to make some failover testing by disabling and monitoring then enabling and
monitoring some disk on the storage cluster.
32. One of your new hired colleagues is asking you about the virtual network connections setup created
in Hyper-V on Server2 which is still member of Cluster1.
33. You have a two-node Hyper-V cluster named Cluster1. As virtual machine named VM1 runs on
Cluster1. You need to configure monitoring of VM1. The solution must move VM1 to a different node if
the Print Spooler service on VM1 stops unexpectedly.
34. You need to create highly available storage spaces that connect to directly attached storage on the
hosts. Which cmdlet should you use?
Enable-ClusterStorageSpacesDired
Set-StoragePool
Add-ClusterDisk
Update-ClusterVirtualMachineConfiguration
35. You have a server named Server1 that runs Windows Server 2016. You need to install the DNS Server
role on Server1. What should you run?
36. What new version of Windows Server 2016 offers the smallest footprint for Windows Server yet?
Server Core
Nano Server
Container Server
VM-only Server
37. In the following section you will have to use your Lab Virtual Machines in order to demonstrate some
technical hands-on skills.
Please login on eLearning TechAdviser and make sure you have connectivity to the below listed VMs.
Once your connectivity is confirmed with the classroom instructor you are ready to begin and complete
the required tasks.
You are supposed to solve the exercises and then upload at least one screen-shoot picture
demonstrating the completion of the task after each of the below questions. A file or archive cannot
have more than 2MB so please be careful of what files you are trying to upload!
You should not use the management network for any of the below exercises that require network
connectivity between lab VMs. You must use the NIC that does not have an IP address assigned which is
connected to your unique lab switch (All your VMs are connected on this switch).
Breaking the connectivity to your VMs will cause a complete or partial loss of the current section. Your
instructor will not help you troubleshoot or reestablish the connectivity during the exam!
Please answer the following questions in order because the exercises are linked each other and you
cannot skip task one in order to complete task two.
For this section you will have to login on VMs called "LabGUI-DC" and "LabGUI-SRV2".
Some of the exercices require IP configuration settings that you are supposed to complete during the
exam. Remember from lab that you have to add IP address, subnet mask and DNS. You do not need
default gateway to reach a neighbour from the same IP subnet. Please make sure first you have IP
connectivity before trying to complete a more complex task.
Please feel free to install any additional role or feature that you consider in order to complete this
section tasks.
Be aware that Identical answer files will attract a fail of both/all similar exams.
Pay attention to the countdown. The files cannot be sent after the time will be expired so you might
completely lose this section!
Task: On LabGUI-DC create a new mirrored volume with the following properties:
Ataseaza fisier:
38. Create two iSCSI virtual disks and an iSCSI target having the following requirements.
Disk size: 5 GB
Ataseaza fisier:
39. Create and list an SMB share by using Windows PowerShell . The share name should be
“DemoShare-”.
Ataseaza fisier:
40. Validate the servers for failover clustering and then create the failover cluster with the two VMs you
have.
Address: 172.16.0.125
Add the file-server application to the failover cluster then add a shared folder to a highly-available file
server. Upload screen-shoot with your progress.
Ataseaza fisier:
41. Create a new User Defined data collector set by using the following information to complete the
process:
After 5 minutes analyze the collected data and upload the results.
Ataseaza fisier:
42. What well-known and trusted technology for supporting containers now integrates into Windows
Server 2016?
Chef
Puppet
Zen Server
Docker
43. What is the minimum RAM required for the Server with Desktop Experience type of Server 2016
Standard installation?
512 MB
2 GB
4 GB
8 GB
44. What virtual switch does not offer networking between the host and the virtual machine?
Internal
External
Private
45. Which is not a typical concern when planning for the virtualization architecture?
Reserve capacity
Maintenance domains
Networking stack
46. Which statement about file ownership in an NTFS permission system is not correct?
47. What SAN technology is critical for lossless connectivity in a converged network?
iSNS
DCB
MPIO
MCS
48. What method in a server environment does not permit the automatic download and installation of
Windows Defender updates?
Group Policy
WinDefend.exe
Disk Faults/Sec
Total Pages/Sec
% Processor Time
Alerts
Graphing